Kitchen machine Kenwood (2)

Alyon, I also thought about it yesterday and wrote to them by e-mail (the one indicated in the booklet), while in Russian, because the Moscow address is offered ...
Waiting for an answer. Until I send the questionnaire, I'll wait for what they say ...

By the way, I call my Kenwood not just Kesha, but Innokenty Petrovich ...
Today he sausage dough for bread. Class !!! I get aesthetic pleasure looking at his work.

Sergey, thanks for the information.
And to which support address should I send the questionnaire?
I live in Ukraine. In our Ukrainian, or Russian, or what?

I am from Russia, I sent it to Russian, now I looked - there is also Ukrainian, but first in your correspondence ask if they are against sending the questionnaire by email. You can also call from the site by phone and leave a request for a book.

Inna, Sergey, thanks for the information.
Let's go from the other side)))

Inna, at first we, too, just stood side by side and watched,
how he drives the dough there ...
Especially my men like this process ...
Shaitan machine)))
And how incredibly he whips whites!
Even just taken from milk, not to mention the store ...
But I don't use those at all.
And I also tried the dough sheeter - a song !!!
The dough on maksismum rolls out so that you can read through it !!!
In general, a year has passed, but my emotions have not diminished ...

Interestingly, and in what place does not understand ???
The gearbox itself is not removable or the plastic housing,
which is put on the gearbox?
I'm fine so far, but I'm starting to worry in advance ...
I have a high speed nozzle that looks like cubes
while everything is normally put on and off ...

The plastic nozzle itself cannot be removed. Apparently the water got somewhere and fssee ... The food processor does not understand at all. And the nozzle cubes every other time. And that's because I blurt out VD periodically ... In short, the metal is not so hot ... I don't understand why they put such an alloy. Somehow a worker took from me and washed the meat grinder in the dishwasher .... now she is so sad, kind of spotty, fortunately it did not affect her work.

GIRL urrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrra !!!
I have Keshka! Majorchik 020 !!!!!

And accept huge congratulations from me .. This is a very cool gift. It makes me feel so happy when someone else has Kesha. Immediately on one more close understanding person to become more ...
Let him serve his mistress for a long time.

In general, a year has passed, but my emotions have not diminished ...

The same feelings ... I am happy as a child ...

I, too, will soon have a year, like Kenwood is with me .. And if the year has not passed, maybe you can also send an application for the book. I really want a pretty one with pictures ..

Girls, how long should it take to knead a tough dough with a hook?

At the first or second speed - 3-4 minutes,
but then you still need to knead it how much
supposed ...

but then you still need to knead it how much
supposed ...

how much is approximately?

And look at this for a specific recipe, there is always
the time of mixing is indicated.

Girls, how long should it take to knead a tough dough with a hook?

Now I'm doing it on the advice of Admin: first, knead (knock) everything into a bun and leave for 10-15 minutes to develop gluten, then knead for 3-4 minutes, and sometimes, if the dough doesn't stick to my hands, I don't even knead. It turns out great!
Look in previous posts or make a search query, where she described everything in great detail.

Good day!
I am very glad that I found this wonderful forum, thank you all for a bunch of useful information! My KMM040 cache is still on its way from Germany (today I only paid for customs clearance).Naturally, with recipes in Russian there will be "no luck".
So far I found this option:
KENWOOD Kitchen Machine Recipe Book
🔗
and a little more convenient (with the ability to search):
Kenwood makes complex meals easy by jenny Schapter
🔗
maybe someone will come in handy too.
On the official website, I immediately ordered an AT445 peeler and an AT320A chopper. The AT340 slicer was included. Tell me, please, you need an AT970A nozzle to roll out the dough, do I understand correctly?
Reason for editing: active (clickable) links to external resources are FORBIDDEN!

I just have AT 970, you probably have a new marking)))

I don't know, they call it that on the official Kenwood website

[Daria33]

Girls, it's me again with my "piano".
I'm all with this recipe book, gift. I downloaded it electronically, (Daria33- thank you, sent. )
BUT! Here I went into a rage, a matter of principle. From the Russian office. site responded on the same day to my letter, with a request to contact the Ukrainian office and gave a link. I wrote -... in response, dully as in a tank!
I call the service support phone. The answer is “we didn’t promise anything, we don’t send any books, where you were offered, go there and contact”. In short, culturally sent.
There is only one way out - to ask Muscovites to fill out and send the questionnaire to their address, and then they will give it to me. Like this.
Fuh, let off steam, but I think, suddenly, who else will face this. So that, as the grit is on the beaten track, you can't beg from our Ukrainians

Innusya, don't be upset.
Ours, they are still fruit)))
And the book that Dasha sent can be printed and there will be a book,
unless it is colored ...
Did you have a Kenwood demo disc in a big box?
Mine did not open ...

DISK? did not have! stole the dogs, the bastards ... .....

Good day!
My KMM040 cache is still on its way from Germany (today I only paid for customs clearance). Naturally, with recipes in Russian there will be "no luck".

No problem, I also bought via the Internet from Germany, model 030. The support team only asked where I bought it, since it is not officially supplied, then they sent the book.

Girls, please tell me what height you need to calculate when raising the top of the combine itself to replace the nozzle, so I think what you need to buy, but I'm afraid it won't just fit under the locker. : pardon: The kitchen is still under renovation (Vproekt), so layout options are possible

Girls, please tell me what height you need to calculate when raising the top of the combine itself to replace the nozzle, so I think what you need to buy, but I'm afraid it won't just fit under the locker. : pardon: The kitchen is still under renovation (Vproekt), so layout options are possible

It depends on what attachments you plan to buy, the easiest way is to go to the store and try on, I cannot put the juicer on without pulling out the machine itself, they do not start up the wall boxes, and other attachments - I can

It depends on how you complete it.
If the frame just stands, without superstructures on top, then
when open, it takes a height of 60 cm.
I have it with a high-speed attachment constantly put on.
Height with her 50 cm.
If with a blender - height 60 cm.

Girls, thank you very much, I'll think ... And at the same time you can work on it with a mixer and on a bowl, the nozzles are almost nearby ...

Girls, thank you very much, I'll think ... And at the same time you can work on it with a mixer and on a bowl, the nozzles are almost nearby ...

According to the instructions - it is impossible

In my opinion, it is impossible, the manufacturer warns ...

[Olex]

Olex, Len, I think it's not even about lifting the combine, although it rises by 52cm until it touches the top point (and the closed one is 35cm), I just went to measure it, - but then how will you put other nozzles? are connected, starting from the blender, etc.
Can you find some place for it to move forward somehow? Otherwise, you will suffer from pulling a bandura, I myself know what a small kitchen is. We have acquired this "ship", and now we are planning a kitchen for it (while repairs), but otherwise, nothing. Therefore, it is better to have a kitchen, under it, the car is standing !!!!

I have it with a high-speed attachment constantly put on.

Alena, do I need to remove the attachment when the bowl or blender is working, I also planned that it would be constantly on top ...
---------
Inna, I am now also redrawing the kitchen plan, and I swear at myself that I took a refrigerator 90 cm wide, and you can't outweigh the doors. But I will definitely take the car .. even if I close half the window (there are no upper cabinets), I’m looking at 84 induction machines, I dream of making jam, otherwise it’s getting to stand on the frying pan and stir, and a bunch of things ... ..
-

And what about pulling is pretty elementary ...
Well I thoroughly studied these topics, so the girls advised
put the bed on a type of thick colored oilcloth napkin,
as they put on the table.
Cut out a beautiful rectangle - and beauty!
With a slight movement of the hand)))) we move the car to any point on the table,
and the surface of the countertop does not deteriorate ...

Lena, I shoot when I work with a bowl, for example ...
It is removed, again, with a slight movement of the hand)))
And it works quieter with one nozzle than with two ...
But I did it, I tried it, I didn't work with two at the same time.

No problem, I also bought via the Internet from Germany, model 030. The support team only asked where I bought it, since it is not officially supplied, then they sent the book.

Is it possible from this moment in more detail? Who sent the book and on what terms?

Is it possible from this moment in more detail? Who sent the book and on what terms?

Yes, that's interesting to me too! I just didn’t understand where our colleague came from - if from Russia, then it’s clear, there, no problem.

Ukrainians ours, squeezed, I already called our office for service support. representation. They told me there that they had not promised any books, they were not sending anything, and literally: "... well, what address is written there, ask there ..." In short, they sent me culturally. True, I still want to call, I will ask the higher authorities - this is already a matter of principle. I don’t know what will happen. We can swear of course, but the question must be closed.
Katyusha (hopefully correct?), In our case there is only one way out - to forgive someone from the Russians, send them a scanned questionnaire by e-mail, and send them to their postal address. And then pass it on to you.

Something tells me that this is not about us, and a conversation with the authorities will not lead to anything sensible, in my opinion. Our handsome men are successfully selling these books for 199 UAH.

Our handsome men are successfully selling these books for 199 UAH.

When I bought my Kesha, and that was about 4 years ago, I bought a nozzle at the Kenwood office - they gave me a book as a gift, a month later I bought another nozzle - they gave another book (I gave it to our forum member). And in the spring on Petrovka (book market) I saw the same book for 30 or 40 UAH, I don't remember exactly

When I bought my Kesha, and that was about 4 years ago, I bought a nozzle at the Kenwood office - they gave me a book as a gift, a month later I bought another nozzle - they gave another book (I gave it to our forum member). And in the spring on Petrovka (book market) I saw the same book for 30 or 40 UAH, I don't remember exactly

I bought two nozzles at the Kenwood dealership, the gifts probably ran out.

Here are the bastards ... fsё will try to try, we can get out of it ... but the option with the Russians, I leave it as a backup

Good afternoon, I want to buy a food processor (to throw out the rest of the equipment, since the kitchen is small):
main options:
1) dough kneading) for dough / for beating
2) meat grinder
3) citrus juicer / universal
loitering at Kenwood
but question of model and attachments:
if you take Kenwood KMC57008 to it AT641 and AT312
or
all the same Kenwood KMC 010 and to it AT641 and AT312 + AT950A
but option 2 is much more expensive
how does Kenwood KMC57008 differ from Kenwood KMC 010?
except for the configuration and the fact that 010 is 400 W more powerful (but it seems to me that 1000 W is enough for my purposes) or am I wrong?
are there any alternatives from other manufacturers?
And if you order not in Russia, which store would you recommend?

Good afternoon, I want to buy a food processor (to throw out the rest of the equipment, because.small kitchen):
main options:
1) dough kneading) for dough / for beating
2) meat grinder
3) citrus juicer / universal
loitering at Kenwood
but question of model and attachments:
if you take Kenwood KMC57008 to it AT641 and AT312
or
all the same Kenwood KMC 010 and to it AT641 and AT312 + AT950A
but option 2 is much more expensive
how does Kenwood KMC57008 differ from Kenwood KMC 010?
except for the configuration and the fact that 010 is 400 W more powerful (but it seems to me that 1000 W is enough for my purposes) or am I wrong?
are there any alternatives from other manufacturers?
And if you order not in Russia, which store would you recommend? Here ...

Let's wait until our "pros" survive Monday (as you know, a hard day * JOKINGLY * th.
I do not dare to advise yet, because I myself have only 2 weeks as an owner. I have Major 020.
We are waiting, sir.
(but in general, having studied all the cars for a whole year before choosing, I was inclined to the 10th model)
It so happened that 020 became a wedding gift, so I am twice as happy! The thing however!

I'm also a beginner, so I didn't recommend it.

I can only say for myself, I always buy equipment for the future, so as not to think about upgrading / replacing for some time. Considering that most of the attachments, whatever one may say, go in the KM * 010 and higher models, I would buy this particular model. Now you do not need additional. nozzles, but appetite is known to come with eating. Look in foreign stores, perhaps the price will suit you there.

The purchase cost me ~ 9200 with delivery and customs clearance, but this is "Profi-Paket + AT340 KMM040". There are cheaper options.

I'm not a pro, but I will answer, maybe I can help you.
I have 560. Soon he will be 4 years old. The price was extremely attractive, since it went without additional. nozzles, whisk only. Gradually I bought the attachments I needed for myself.

most attachments, whatever one may say, go in models KM * 010 and above

.
Only the AT 640 combine is not suitable for the 570 model, since there is no medium-speed socket. Everything else is the same with the KM 10 model.
I won't say anything about juicers, because I didn't buy them as they were unnecessary. I am happy with the meat grinder, I use it often. In addition to minced meat, I make sausages. In any case, it turned out to be better than my old meat grinder.
I knead the dough regularly, because we eat only our own bread. For kneading for a couple of loaves (700-800 g of flour) is enough. For larger volumes, the bowl will be too small.
As for the whisk for whipping, I did not try to whip 1 protein, 2 or more whisk perfectly.
From the attachments I have an ice cream maker (used quite often in the summer), a wiping sieve (I wipe cottage cheese, sauces), a chopper (nuts, sugar powder), a blender (lately, regularly mashed soups), a high-speed shredder (an irreplaceable thing, rub everything: vegetables, cheese , chocolate), potato peeler (self-indulgence). The only other thing I'm thinking about is the groats mill. I forgot to write about the dough sheeter, I also use it regularly, an extremely convenient thing!

Thanks for answers)
but did not understand Kenwood KMC570
do all these attachments fit ???
AT641
AT312
AT950A

and 2 question: where is it more profitable to order it ???

how does Kenwood KMC57008 differ from Kenwood KMC 010?

Now I also dream about him, and as far as I have already figured out, then in the 57th bowl is 4.6 liters, and in 010 it is 6 liters

Now I also dream about him, and as far as I have already figured out, then in the 57th bowl is 4.6 liters, and in 010 it is 6 liters

Julia, in 010 bowl 4.6 l, and in 020 - 6 l

010 is more powerful, and only the kneader and mixer are on, right?

and if the power is more, then the internal parts are also more reliable?

010 is more powerful, and only the kneader and mixer are on, right?

No not like this. Power 010 - 1400, 020 - 1500, kneader and mixer in both machines

and if the power is more, then the internal parts are also more reliable?

Julia, I also began to choose from 570 or 560, but then, as far as I remember, I found information that the internal parts 560 are made of plastic, in KM 10 and 20 are metal, my husband said that it was better to overpay a little, it was decided to take 10. As a result, my husband when he touched 10 and 20, he bought me 20. It would be better for you, too, to see in the store, touch and then decide.

[nl0,]

My Kesha has arrived, there is no limit to joy. Surprisingly, the instructions still contain Russian. The set includes a disc with recipes, but only in 6 languages: English, German, French, Spanish, Italian and the Netherlands. If anyone needs it, I can make an image and throw it off.

nl0,
I picked up the nozzles directly on the official website of the seller, for Ukraine it is 🔗, in the accessories tab, attachments for your model.Naturally, you can buy later anywhere, the product code is the same all over the world.

Thanks for answers)
but did not understand Kenwood KMC570
do all these attachments fit ???
AT641
AT312
AT950A

and 2 question: where is it more profitable to order it ???

Kenwood 010 comes with a bowl + whisk + hook + 2 beaters
in one version comes with Blender
Here 🔗

alternatively + Blender + meat grinder + juicer
Here 🔗

do all these attachments fit ???
AT641
AT312
AT950A

Yes, they do. Only AT 640 is not suitable.

By the way, after looking through a lot of offers, I looked that this site for the sale of Kenwood in Ukraine (as mentioned above) is the cheapest. The rest are already wound. I also order a shredder from them