Food processor Bosch MUM XL ... (MaxxiMUM)

[Katerina]

Katerina, I don’t know whether it’s a matter of cube cutter or not. But I’m just not going to make pasta for sure, so I don’t need nozzles for them automatically. Roll out for dough - maybe, but I rarely make dumplings or something like that. Universal cutting - there is a Burner, so in my volumes it is easier and faster for me with him. And as I imagine a piece of similar size, into which disks are inserted, I immediately stop wanting it absolutely. In addition, I have old, old furniture in my kitchen, in which space is used very irrationally and so far I cannot change this. Here is a "5-in-1" grinder sunk into the soul, maybe someday I will buy And so - I don't really need anything from the attachments.
Here is a meat grinder, if it stands separately, is it more convenient than a nozzle? or no difference?

I think that the nozzle is more convenient, because the unit, most likely, is on everyone's table. I took out the nozzle, attached it and work. And the meat grinder must also be kept on the table or taken out from somewhere. But somehow the grinding is not very easy, the meat grinder moves, the motor strains, it seems to me. With a shallow lattice, it turned off once, apparently the protection worked. Now I grind only with medium holes. And after work, it is so hard for me to promote it that I have to attract the male population. Conclusion I conclude that it is better to grind separately. But when it comes down to it, I don't want to get it, I take the nozzle for milking Bosch.

Nadia, do you have to adjust the dough when there is little flour?

And when how. Just yesterday, I just threw eggs, salt and flour, turned it on and took up the broth. As a result, 3 pieces of dough, which I simply connected together). That is, nothing had to be corrected yesterday. But there were such cases, yes.

I'm talking about a place for attachments and a separate device - I realized this after buying a cube cutter.

Yes, the cube cutter is bulky, the dimensions are considerable. Basically, like VeggieLove. I have a separate wide and deep shelf in the closet, which fits a plastic drawer with grater disks, a hook, a whisk, a silicone nozzle, a grid for cube cutters, etc. bowl, juice press for citrus fruits. And there is still a place)))

I advise you to be very careful with the cube-cutter nozzle, carefully assemble it and carefully work with the pusher, because for the second time I used the tab in the gearbox shaft for the second time due to the most likely "curve" of the assembly for work or because somehow not so pressed by the pusher. In short, crunching 3 times and the end of the work. There was a spare tab in the kit, but now I'm afraid to turn on the attachment.

Here is a very ill-conceived attachment for such a power of the combine. This most protective tab in the shaft is triggered for any slightest reason, 4 plastic tendrils break off on it, which, when removed, can easily get into the mechanism of the shaft itself and jam it, and the shaft is not separable! I originally came across a jammed shaft from the store, how I fought with it, I described above... At the end of the epic with the shaft, I turned on the nozzle and someone pulled me to push the food with a pusher from cutting, because I was happy to find that he had the same cross-section The cross-section is the same, but the length ... In general, the pusher is from Cutting VeggieLove falls under the knife of the cube cutter and the tab of the shaft that has just been replaced in the service immediately triggers. A spare tab came in handy, and now I push the products only with my own pusher)) In the service, the tab costs about $ 7, not cheap.
But now I take into account all the previous experience, and successfully make okroshka, Olivier and vinaigrette))))

Here is a meat grinder, if it stands separately, is it more convenient than a nozzle? or no difference?

I think that the nozzle is more convenient, because the unit, most likely, is on everyone's table. I took out the nozzle, attached it and work. And the meat grinder must also be kept on the table or taken out from somewhere.

Now such meat grinders that there are no problems with them at all. In the same way as I took out the nozzle - and work)). My meat grinder is assembled in a large pull-out drawer in the kitchen right under the work table. Everything is very convenient, no problems. But only its engine is adapted directly for this work, and it has more power (2000 W), and its cross-section is 8 centimeters, if not more (it is necessary to measure it later). Nothing clogs, grinds everything easily. All the same, the car is a beast! I recommend to everyone. And a separate engine saves the resource of my MUMchik. And the price of my DEX DMG-200 meat grinder is, for example, in the "Rosette" - 2399 UAH, the price of a meat grinder attachment with an adapter is 2474 UAH. That is, a separate unit is also a little cheaper than just a meat grinder attachment with lower parameters and without engine.

In general, I must say that I really fell in love with DEX. For me it is now Chinese Bosch. All the devices that I bought from this manufacturer were not bought at random, after a long observation and according to recommendations. And they never disappointed me. Well, their price is generally a separate pleasure.

And I generally have a Russian meat grinder Ratep, power ... 140W The only complaints were that their engines often burn. I've replaced two, but the third has been working for about 5 years. But it also stands assembled, and I have it right on the table. I just push it closer to me and use it. I washed, dried, collected and then stands. It is definitely worth less than the nozzle - 2500r versus 7000r for the nozzle.

[zombokatya]

zombokatya,
Thank you !!!!! For your review of the attachment MUZ45XTM1... I already began to worry that I would break the combine while I was installing it.

[Anchic]

Anchic, PinkPanther, merrycook, zombokatyaThank you girls for your discussion of the tips! Apparently it's really better to take a separate meat grinder and a separate Bosch dough mixer (I would only use it without a blender ... - is XL10 still sold somewhere?). That is, if all the same the essence is in the dough mixer - is it not better to take Anxarum?
Why do I need a cube cutter and all sorts of cutting, I still do not understand ... I seem to be fine with a knife. And we shred cabbage on a special manual shredder. Cut a tough pumpkin, though ... but peeling it makes me more difficult than cutting it. And the machines have not yet learned how to clean it with an automatic machine.
And if I think about it later, I'll take a manual noodle cutter.

[Elena]

Elena, cube cutter - yes, probably more a whim. It depends on the volumes that have to be prepared. It's a whim for me, but I wanted to. They gave me money for my birthday and I bought

That is, if all the same the essence is in the dough mixer - is it not better to take Anxarum?

It is quite possible that it is better.

XL10 - I didn't find it in the fall. Although I don't have a professional blender, and indeed, I didn't have a jug blender. Therefore, I was not very upset and took the 20th.

[Aenta]

Aenta, you are welcome. What impressions does he have? My euphoria has not yet passed - every morning now I make myself a fruit cocktail in a small blender.

and XL10 elsewhere is sold?

This winter I was looking for a gift - I could not find it. Maybe more will appear.

Nadia, thank you, I'll take a closer look at DEX - although our choice of this brand is too small.

Why do I need a cube cutter and all sorts of cutting, I still do not understand ...

The cube cutter is a miracle machine that crushes food into small cubes. Shredding a large pot of okroshka takes about 3 minutes, maximum 5. Olivier is even faster. Well, for example, she turns one really large cucumber into cubes in seconds in 3. I even tried to cook vegetable soup, where I chopped all the products in a cubic cutter. But as I have already found out, there are cheaper cube cutters. Even on the Bosch MUM of the younger series, the cube cutter costs significantly less, as well as other attachments.And for cutting into cubes, the power of 1600 W is not needed. So you can think about it.
Vegetable grinder VeggieLove - cool thing Chops cabbage in two sizes: thinner and larger. Relevant for salting, for filling for pies. In general, a very convenient device for various workpieces. He knows how to chop, grate, cannot be compared with a manual shredder.

It's a whim for me, but I wanted to. They gave me money for my birthday and I bought

A very similar story. I wanted, I was wondering how it happens. I got vacation pay and bought it.

With a shallow lattice, it turned off once, apparently the protection worked.

Has this happened to you with the Boshev meat grinder? And what kind of meat was twisted?

We bought a Boshik 40 yesterday, we cannot adjust the whisk - it grinds one side along the bottom of the bowl.

So I don't know what to do now - they were tormented with a whisk, but it turned out that all the nozzles rub against the bowl

[elokxa]

elokxa, and the wrench was included to adjust the attachments?

[zombokatya]

zombokatya, yes it happened with the meat grinder attachment with the finest grate. I thought the motor flew, but thank God, in 5 minutes everything worked

I figured out the hook - out of fear, I didn't wear it to the end. I kneaded the dough for flatbreads cool. The corolla grinds, with one side. Everything is already twisted and twisted with a key - the infection grinds. I don't know what to do - I already love him dearly.

We arrived from the service center - asked to change it to another of the same model - the same defect (the whisk scratches the bowl at the highest position). The money was returned immediately. Very sorry

[elokxa]

elokxa, if there is no other way out, do not be afraid, shake it with your hands: lengthen or, on the contrary, shorten it. I did so with mine.

[Nadia]

Nadia, I understand that Elena returned the combine to the store.

Elena, well, maybe the next attempt will be more successful!

[Nadia]

Nadia, I understand that Elena returned the combine to the store.

A! I misunderstood, I thought it was not about the combine, but about the whisk.

Yes, we were talking about a whisk - and neither we nor the service could do anything with it. At first I was very upset, but now I'm thinking of looking at another store, especially where you can see a demo before paying. I liked him very much - the kneader and blender work very well, but what a handsome man he is, there is nothing to say.

[PinkPanther]

PinkPanther, I wanted to order an insert for the cube cutter shaft in the Bosch center. I wrote to the service to indicate the number of the tab for the order. They gave me a number. I made an order through the delivery service. The price just stunned me - with almost $ 100 shipping! You wrote that this insert costs 7, could you tell me where you saw it?

[merrycook]

merrycook, and the order number is 623944?

[Anchic]

Anchic, no number given 12004804

[merrycook]

merrycook, wrong number. Now I specifically climbed into the instructions, the order number is written there. The one that I wrote. Look in the instructions, page 71, there is described the purpose of the part for ordering and it is written what can be ordered from the service department. And in brackets is the order number.

Now, by searching, I found this on the Vneshremtor website:

The nozzle consists of: large pusher-606436- small pusher-606437- knife-cutter-grid-615420- bowl-11004037- cover-707370- knife-656315- knife-lattice 13mmx13mm- pusher-633441- axis-12004804- holder-12005711.

You were given the price for the whole axis.

Yes, it is possible. Is there anything about the tab?

Well I wrote you the number from the instructions for the cube cutter. You can see for yourself.

[Anchic]

Anchic, it turns out they do not have a separate tab

[merrycook]

merrycook, try to make a request. It is necessary to look in the warranty workshops. There should be such little things.

What impressions does he have? My euphoria has not yet passed - every morning I now make myself a fruit cocktail in a small blender.

Honestly, not really needed. I love milkshakes. A hand (or hand) blender does a great job with this. Now I will do both there and there. I bought it because of a glass that you can take with you. I haven't done anything else yet.

You wrote that this insert costs 7, could you tell me where you saw it?

When I had an adventure with my cube cutter, and it was right after the purchase, I visited the service center more than once. The defective shaft was replaced for me free of charge, but I asked about its cost.The price of the shaft at that time was 1040 UAH (about $ 50), I also asked the cost of the tab, I was told 150 UAH (about $ 7). So I didn't see her, I just asked the service. I wrote about all this on page 2 of the topic, here.

It just dawned on me today that the shredder disc with two knives is double-sided. How disappointed I was with the cabbage shredder! But when I turned it over to a thinner knife, I was very pleased. What I was missing. The cabbage is thin! I got myself a marinator (it has nothing to do with the combine), now not only sauerkraut, but also pickled cabbage. But cutting carrots in Korean is not very good for me. My hand grater is better. But rubbing with my hands is torture for me.
Today I bought the guts, I will cook grilled sausages tomorrow.

I'm talking about this disk:


Slicing:

It didn’t come to sausages today. Luke was not at home. But I tested a new cube cutter:


Offset! But just wash it later ... Unlike mum5, there are 2 lattices with cubes, the largest and smaller.

By the way, the carrots were partially cooked in a saucepan, and partially in a multicooker until soft. So the one that is completely soft turned from cubes into mashed potatoes. The same thing happened with boiled potatoes. I think that it chokes in mashed potatoes even at the stage when you push it with a pusher, and then while stirring. In short, you need potatoes that are not boiled, and cook vegetables so that they are not completely soft. The beets, apples and cucumbers were cut perfectly.

Hmm ... And I had no problems with the shape of the cubes, I did not make mashed potatoes. Yes, it depends on the products.

[Lena]

Lena, try cutting vegetables after chilling in the refrigerator. It happened so by chance - I cooked it one day, and the next. day cut. Everything was cut well. And then, in the Kenwoods topic, I met this advice that you need to cut boiled vegetables on a cube cutter chilled in the refrigerator.

Try cutting vegetables after chilling in the refrigerator.

I will definitely try. The multi carrot was still warm. Maybe this is the case?

And I found that soft vegetables should be cut at the lowest speed, well, and minimum pressure. The cutting rotates - I throw the pieces so that they can cut themselves with little or no pressure.
And be sure to cool them before that, to thicken.
Sometimes, to speed up cooling, I throw 10-20 minutes into the freezer

Girls, can anyone tell me what is the noise level in MUM XL in decibels? And do I understand correctly that XL20C and XL40G differ only in color and the presence of a chopper attachment?
and as far as I can see from the photographs there are no handles on the bowl?

[Elena]

Elena, on the bowl, as if the edge is bent, for it we take the bowl. Quite convenient. The models differ in color and equipment, there are no other differences, we understood correctly. I can't tell you the noise level in decibels, I didn't find it in the instructions.

[Anchic]

Anchic, and can you compare the noise level with some other technique? to navigate

[Elena]

Elena, at the highest speed (yesterday whipped squirrels) somewhat quieter than my free-standing meat grinder. The one is still louder. I have a Ratep. At the speed for kneading dough - it does not bother at all.

Hello girls. I want to stop by and tell you about the meat grinder. I already made sausages on it. And I came to the conclusion that I still had to buy a good meat grinder separately, as they wrote here earlier. I can't say that horror-horror is direct, but I liked my previous Phillips much more. Somehow she was better. Of the minuses, the hole is located low from where the minced meat comes out. You can't substitute every bowl. And I really didn’t like the long narrow "neck", which should be washed with some kind of brush. In short, it is not worth the money, in my opinion.
In this regard, I took out my old juicer and was glad that I had not yet had time to buy a citrus attachment.
But I still did not understand how to turn on the large blender bowl. There is nothing in the instructions about her. It seems to have become good, clicked, but I cannot understand why it does not turn on. Maybe you need to switch something somewhere?

[Tiramisu]

Tiramisu, Lenaand the hook slot is closed?

Tiramisu, Lena, is the hook slot closed?

The hook socket is where I put the stirrers? Open. I don't even know what and how to close it ...

[Lena]

Lena, there is a special plug for it. Maybe because of this it does not work? I always close this slot when turning on the blender. The instructions say so. We must conduct an experiment, but this is in the evening.

[Anchic]

Anchic, you can skip it - it does not work without installed plugs. Have already tried it.

[Tiramisu]

Tiramisu, You should have a set of "covers" for the drives. To drive the nozzles (beaters) - there is such a cover that looks like a cap with a visor.
In the instructions for the combine, everything is shown in figure "F".