Pizza makers Princess 115000, Travola SW302T, Fagor MG-300

opened, and the top plate moves away from the plastic to half the circumference in the area of ​​the handle and telepaths

go nuts !!!!!!!!!!

[tatika04]

tatika04,

Katya, I don't really know the taste of purple.
But green, something ... mmm. with tomatoes the most it.
So why, change the apartment? Defective? Well, not knock on it with a hammer?

[tatika04]

tatika04, it is necessary to change, I think. It's dangerous to use it

something clicked in her.

this is a relay, ok

and the top plate comes off the plastic

it was similar recently

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=391348.0

- the party, which was defective, was caught

oh, exactly.
and I read about this entry, but managed to forget.
I still bake now, maybe I didn't buy bread, I hoped for the stove.
I opened it a little, shook it, it seems that nothing is already peeling off. but it was, I even saw some strange rubbed line on the outer part of the plate.
and bolts that hold the lid or something.
in general, I'll bother the babble and still look

By the way, I was not, it turns out, ready for the fact that 4 cm is the total height, I thought it was only the depth of the lower pallet. sorry.
may look for another.
but I like this outwardly and multifunctionality.
I'll go for another Amazon I'll torment

4 cm

: - \ exactly exactly.
will not be enough.

In general, I did it while I was writing here, I forgot a bit.
dried out.
but this is just right for us
with rosemary. who can't stand it here?
and what kind of potatoes they have in their oven ... mmmmm

Tatyana, with the first masterpiece! Congratulations! A beautiful cake!

Marina, thank you. sorry to have to send back

I even saw some strange rubbed line on the outer part of the plate.

Maybe traces of glue?

I have the same garbage with a Shtebovsky blender - suddenly the outer metal flask began to turn relative to its plastic base. And fell off completely. And there the fixation on the turn is based, and not on latches. I had to spread it with glue and fix it. But I don’t even know how to fix the heating lid .. Maybe, while hot (well, thermal expansion and so on), put something low-combustible between the plastic and aluminum? For example, a thin piece of silicone or at least a piece of wood?

It's a pity that it was so unlucky. ((

sorry to have to send back

Oh, well, also a way out, yes.)

we will test it again.
the poet's soul could not bear it ... there was that princely - nothing at all. and a couple of screws.
unscrewed the screws on the lid, 2 pcs, removed the lid.

and there are such pimtyki


go into such brackets


and the bolts on the pimtykas are walking. I twirled them a bit, put them back together, everything seems to be holding on.
I'll go to bake the second cake, and I'll check it at the same time. as a last resort, you can still squeeze out - you can press the pimtyki.
see, I'll have to try further.
but in general, there is that princess, a frying pan with a boiler. with strong heating, just this red plastic may well leak, and no ventilation from below will help this, I think

I forget to clarify everything, no smell at all

[logitex,]

Interested in how much you need for 1 pizza in full princess size? That is, how many pieces are the full recipe?

5 minutes from Anis I have exactly 3 pizzas in Princesk

logitex,
Divided into 2 parts - it turned out thick. however, there were also a lot of fillings. The dough rose so that I did not dare to lay it in the princesses, I made it in the oven.
And I'll put less yeast next time.

but in general, there is that princess, a frying pan with a boiler.

Well, of course.)) There were scattered pictures in the subject.

with strong heating, just this red plastic may well leak, and no ventilation from below will help this, I think

Well, if the thermal sensor messes up, then yes. And so it goes into a safe mode after the allowed heating.

Lena, yes, yes. but it’s not clear to me how plastic can take such heat.
let's see in action.

[Tatyana]

Tatyana, Go crazy: girl-swoon: Well this is a feat (to be able to untwist). I would not dare to do this

Natasha, what are you talking about. There are two bolts where the top is connected to the bottom. the main thing is that the screwdriver was normal, and I grabbed what I got under my arm, barely unscrewed it.
and I'm not at all friendly with the repair.
and the lid keeps like. shcha finished the second cake. Will go to work for her husband tomorrow.

[Tatyana]

unscrewed the screws on the lid,

Tatyana, , HEROINE no one dared to split the unit on the first day upon receipt from the bread makers, with a weak toasting of the top, they twisted the bolik, and my husband, too, with my Ts. U. from the forum, but it's all outside, and you !!!!!! write more, how your girl will continue to behave there. to be honest, I would do the same

[tatika04]

and the upper plate moves away from the plastic to half the circumference in the area of ​​the handle and teleports. if you try to close, attach, clicks, and then leaves again.

tatika04, Tanyusha, sistra !! Well, I have the same nonsense with the Princesses, but I have not had time to promote it yet! Keep in touch - keeps or disappears, okay? I will follow in your footsteps, unwind it, infection, my clever girl!
Thank you for the pictures!

Ira-Irsha, well, except that on the first day no one was picking up.
But they wrote that what kind of pins had fallen off, that they were holding the lid. I didn’t see them half open, I unscrewed them all.
Yes, it's as easy as shelling pears for children's toys. Have you never changed the batteries yourself?

Rita, well, unscrew and tighten the inner screws under the lid, if you also have the same problem, and there seems to be no other, and you will have like a new Princesca.
It’s very inconvenient when the plate beats apart from the lid, frankly speaking, its handle is not comfortable at all, although it is flat and takes up little space.
I sniffed ready-made puff pastry, smellnuuuuut.

Rita, well, unscrew and tighten the inner screws under the lid, if you also have the same problem, and there seems to be no other, and you will have like a new Princesca.

Tanyusha, sure, I'll take courage - and go! Tell me, is your lid or base hotter? My top seems to be much stronger.

Rita, you don't need courage, you need a good one. cross screwdriver.
And about where it warms more, it's too difficult for me so far, but looking at the photo I got the idea, what do you say? These are purchased frozen puffs with cottage cheese. I put it cold, it was baked for a long time. min 18, turned off, opened min after 8, they fell and damp, turned on again min on. came out as on the package, min 25 total time.
this is the top


this is the bottom, and on baking paper

I would say that the bottom bakes stronger - the puffs lay on baking paper and nevertheless are well ruddy. On the contrary, the top is fried more.
Devulki, is it possible to cover the baked goods with something on top?

The bottom is heated by contact, and the top by radiation, unless the baking rests on it from the very beginning. It is generally incorrect to compare. )
How hot will it be - if you hold your palm in the air over an empty pan on the stove or if you press it against it?

Devulki, is it possible to cover the baked goods with something on top?

like many wrote that they cover with paper and silicone from above, when necessary.

The bottom is heated by contact, and the top by radiation, unless the baking rests on it from the very beginning. It is generally incorrect to compare. )

Maybe all the same we are talking about the fact that the top is preparing faster than the bottom?
After all, Rita writes that she seems to have a stronger upper hand.
For verification, I want to make thick yeast pancakes, and the oven does not turn them over, but turning the princess.apparently, this is quite possible. And it was already mentioned in the topic.

We wrote-wrote, many times I sometimes cover with a Teflon rug, but this is extremely rare, only if I miss the amount of dough, I will take more than the pan can hold.

when necessary.

When it is necessary - this is one question. If cheese starts to burn on my clumsy pizza leaning against the roof, then I'll cover it too. If at the same time the temperature below is the same, then you won't have to cover anything - the dough is not cheese. )) But this will not mean that the top heats up more.

[baked]

For verification, I want to make thick yeast pancakes, and the oven does not turn them over, but turning the princess. apparently, this is quite possible.

do not reinvent the wheel, read the topic, twist a heavy and hot frying pan, of course you can, but no need, open the lid and turn the cake in one motion, and why? - and so the top baked well.

is the top faster than the bottom?

so that the pizza top cooks more moist (+ moist topping) along with the thin dough

Is the princess's cord long?

[Sedne]

Sedne, no, now I will measure

[Sedne]

Sedne, 70 cm

I want to give myself this princess to the DR, so I'm thinking of waiting for others, or now I order everything, I look at her, you cook so well in it. I love the oven, I should definitely like it.

[Svetlana]

Svetlana, so speed up the gift to yourself. And give another one to DR.

[Vika]

Vika, so this is 2, 1 ken has already been bought, well, that is, my husband gave it to me) Well, I thought like once my husband gave me ken, I need to give myself something And I like the princess, because I really like the oven, and you can bake in it much. And he also sent me a discount on other ozone every year before, so I think maybe this year he will send

[Svetlana]

Svetlana, Well, if dr DR is quite a bit left to wait, then wait until the discount.

Ira, Lena, understood everything, do not twist the pan, the pizza on top must be baked.

and the cord, well, straight stub. Yesterday I put it behind the cartoon, and behind it there was a grill right away, I didn't get it, I had to change places.

[tatika04]

tatika04, Tatyana, the cord is too small for me. I can't change places: there is a thermopot, a slow cooker and a Princess, I have to put it right next to it because of the cord.

the lower part of this shape fits very well into the princess, and closes


side height 210mm
diameter 300

the lower part of this shape fits very well into the princess, and closes

Mmm ... why? Clay is an excellent heat insulator, why protect food from the heater?))
Again, if the temperature sensor is on the bottom, then it will turn off the stove too often, and if from above, then the bottom of the food will not cook well, but the plastic of the stove will overheat well. Imho ...

[tatika04]

tatika04, Tatyana, the cord is too small for me. I can't change places: there is a thermopot, a slow cooker and a Princess, I have to put it right next to it because of the cord.

I hid the princeska in the oven for now, but I will take it out as needed, and I have already rearranged the cartoon, so the road is free to the outlet. but the length of the cord is useless. I haven't met such short ones yet

and the cord, well, straight stub.

I agree 100%. I put Princesca on the stove (it fits perfectly, firmly on the grates of my gas surface), but it doesn't reach the sockets. And since I will not rearrange anything, everything has been standing for a long time and conveniently, I had to buy a 1 meter extension cord so that I could get it to the outlet, and so that the cord would not hang strongly. I do not pull this extension cord out of the outlet, and I hide it behind Boshik (who with his body covers the sockets with stuck cords from Boshik himself, the microwave and now from the extension cord)
The princesca herself is now always standing next to the stove. She's always at the ready!

I still have a place, but I don't want to keep on top

Has anyone had a DR recently, does ozone still send discounts on it? And then I really want to order this princess and if she doesn't send it, then there's nothing to wait

Has anyone had a DR recently, does ozone still send discounts on it?

He sends me ... in July he sent me 500 points about somewhere in a month - he did not specifically inform, I myself saw it in my personal account ...

I received points from Ozone and congratulations in September by mail a week before my birthday

What for? Clay is an excellent heat insulator, why protect food from the heater?))
Again, if the temperature sensor is on the bottom, then it will turn off the stove too often, and if from above, then the bottom of the food will not cook well, but the plastic of the stove will overheat well.