Crochet
Quote: Irina F
with the price, I think they were wise)))

I saw it with my own eyes, here:

🔗



Quote: Irina F
Krosh, I've found

Aha, thanks, my golden !!!

Dragged him to the comparison table to Philips 9620/20 ...
Irina F
Crochet, went and looked. The site is somehow left! Exactly!
kseniya D
Quote: Krosh
I saw it with my own eyes, right here
Nonsense, whatever the product, the price


Added on Monday 21 Nov 2016 4:07 PM

Kroshik, Inn, here's their of the store

🔗

After your link, the prices on the offsite seem to be pennies.
Irina F
Cvetaal, Sveta, I went to soap the water container and ordered my mommy to drain the water after each ironing)
Crochet, Innus! I wish you to make the right choice)
TaTush
Girls. I'll put in my 5 kopecks. Steam generator machine "Zvereva". Yuzaem Phillips, already 4 years old, the flight is normal, never wished ... But the killer had to clean it !!! The summer was hot and ... there was a mobile air conditioner in the house ... Water from it a tube into eggplants 9 liters .... As a result, we have not cleaned for four months already. Mom has an ordinary iron, she also took it, too, so far without cleaning. Free ten kondeya


Added on Tuesday 22 Nov 2016 00:19

Before that, no filters helped. Sooner or later he will spit anyway. And at the most inopportune moment
Irina F
TaTush, do not understand, did you pour water from the air conditioner into the steam generator?
Alenka212
I switched to distilled water for a steam station long ago. Before that, the lila was boiled. But for some reason in the morning, when you are in a hurry, the PS demanded cleaning.
Now it does not ask for cleaning at all. My nerves are dearer to me.
TaTush
Quote: Irina F

TaTush, do not understand, did you pour water from the air conditioner into the steam generator?
Yes, out of it. First they poured out, and then it dawned !!! A whole bucket of purest water overnight. Therefore, over the summer, we "poured" the water supply for the ironing. will end, I will buy water at the gas station, it is cheaper there than in Auchan.
I agree with Alenka 212, it was insulting and painful when the iron suddenly "spits" on a snow-white shirt or sheet. Now there is no such problem ...
Irina F
Alenka212, TaTush, Thank you!
Is distilled chtoli water sold at gas stations? I didn't even know. But, after all, if you drain the remaining eyes after each eye, then you will get enough of that water!
TaTush
Yes, at a gas station a bottle of 5 liters can be bought for 50-60 rubles. Why drain? I have it until the next ironing. Grandmother drains out of an ordinary iron, but the expense is not the same.
Anchic
We have found the cheapest one at the gas station for 80 rubles on Lukoil. At the Globe for the first time they took a couple of five liters for 40 rubles, but it was a special offer. Then we went there for water by a specialist (we have free buses), it was already 60 rubles. But still not very expensive.
Alenka212
And I don't drain. And you buy a few 5 liters and live in peace.
TaTush
I'm ready to distribute it for free next summer))) it's a pity to pour a whole bucket into the sewer every morning. even though water is out of thin air
Irina F
Clearly, then we will not merge)
Virgo, how long have you been using this water? It seems like the instructions say that only tap water can be filled?
TaTush, I'm preparing a barrel))) and I'm leaving !!!
Bijou
Quote: Irina F
Virgo, how long have you been using this water? It seems like the instructions say that only tap water can be filled?
I'm four years old. Or five? True, not a station, but an ordinary iron.
Irina F
Bijou, Lena, okay! So I boldly buy some water!
RepeShock
Quote: Irina F
Is distilled chtoli water sold at gas stations? I didn't even know.

It is also poured into the battery in the car.
It is sold in car markets and in car dealerships)
Anchic
IRINA, in hypermarkets, distilled water should also be looked for in the "everything for cars" section. For irons, distilled water is golden.Half a liter (if not less) rubles for 80 are sold! Well, it's in the bottle that says it's for irons.
Bijou
Irina F, well, they wrote above about a breakdown in the sole supposedly from soft water. In principle, in theory, I can agree that soft water is a fairly aggressive solvent. But with hard or dirty water there are such problems that it is easier for me personally to take such a risk than to constantly suffer. more steamer in the iron - drips.
Irina F
Oh, by the way, how can I clean the holes in the iron? I looked, they are so hammered
Alenka212
Irina F, and the cleaning function is not provided? I had an old Phillipoc. It was necessary to heat the water to MAX, and then the regulator for the cleaning function: it flew out!
And if they were hammered into the holes to death, then with a match or a toothpick she carefully punched them.
Irina F
Alenka212, although I am hanging out here with a smart look, I don’t do ironing at home and everything connected with it! My mom is in charge of this), this is how our responsibilities are distributed
I must ask her about the cleaning today. How often is it done?
Ahh! This is when the red button lights up, right?
TaTush
Quote: Irina F

Oh, by the way, how can I clean the holes in the iron? I looked, they are so hammered

The same distillate. Turn on the iron to the maximum temperature and use the button to start active steam release. Everything should be cleaned out.


Added Wednesday 23 Nov 2016 10:03 AM

In any case, this is how I used to count my steam generator. Until I thought of pouring it into it
Twig
I tried to find a photo, it didn't work.
Does the iron have an aluminum sole? So, there were holes on the sole!
It's not about the steam holes, on a smooth surface that heats up and ironing.
In the service, these soles were hung on the stand as a sample, which cannot be done.
The tiny holes are like a needle puncture. Well, actually, one such hole is enough to make it impossible to use the iron.
I got interested and asked why such holes happened, they explained to me that it was from soft and distilled water.
So read the instructions. Maybe you can use any water in your models.
In mine it is impossible. And it's written in the instructions. Cleaning is easy, you just need to empty the water from the heating tank located on the ironing board once a month and pour a liter of water through it. Scale falls out in pieces.
I have a Laura star, she is already 12 years old, mmm. 2 years ago the button burned out, got off with a slight fright, bought it in the service and repaired the mush.
🔗
TaTush
I started cleaning with distillate after I watched the manufacturer's video on YouTube. His recommendation, no gag.
Twig
TaTush, well, we have different manufacturers. I mean, sometimes you have to read instructions. The devices are expensive.
TaTush
Quote: Twig

TaTush, well, we have different manufacturers. I mean, sometimes you have to read instructions. The devices are expensive.

I completely agree. Only my instructions didn't say a word on how to clean my steam generator. But thanks to the world wide web
Vinochek
Girls rather cheap type models 🔗 worth considering? and what to look for when choosing?
My iron is living out its last days. (((
Taia
Evgeniya, I have been using this for 10 years.
During all this time, only the steam supply hose broke. But they are on sale, they cost a penny, they were replaced and I use them further.
Crochet
Quote: Vinochek
what to look for when choosing?

I'll also stand, listen ...
Vinochek
Inna, while I subtracted that it is necessary to pay attention to the holes in the sole (the more, the better), power, amount of steam and steam boost, the ability to adjust the steam and auto shutdown.
Crochet
Thank you for sharing the information, Zhenechka !!!

Today, in my list of applicants there are several models with almost the same technical characteristics and with a very noticeable difference in price) ...

I am trying to understand whether it is worth overpaying ...
Vinochek
Quote: Krosh
Today, there are several models in my list of applicants
share) let's think together.

Quote: Krosh
is it worth overpaying
herself is now in such thought. We must urgently choose something.
Taia
Often, until you try a function in the device yourself, you don't know if you need it or not.
When I iron my iron with a steam generator, everything is fine, everything is fine. I don’t know what else to want from him.
I would like in the future, a pipe dream is an active ironing board.
Vinochek
ordered. philips_gc_6602_20
I'll pick it up tomorrow. Took on the action -25%.
Alenka212
Quote: Taia
Often, until you try a function in the device yourself, you don't know if you need it or not.
I totally agree. I have steam and temperature control. Everyone wondered how steam generators could iron without adjustment. In reality, I almost always have an economical feed and the 1st temperature regime. Several times included double steam for very dry cotton items.
Deer pussy
Girls, someone uses the Bosch TDS 2251 steam station, it is now with a good discount, is it worth taking it or not, tell me
Crochet
Girls, and someone uses a steam generator Tefal GV8964 ?

Iron with steam generator


MAIN CHARACTERISTICS
Model GV8964
Steam generator type
2 year warranty
Power consumption no W
Steam pressure 6 bar
Water tank capacity 1.6 l
ADDITIONAL CHARACTERISTICS
Steam output 120 g / min
Steam power 440 g / min
Continuous steam supply
Steam boost is
Vertical steaming yes
Functions water spray function
scale protection system
self-cleaning function
regulation of blowing and vacuum modes
removable water tank
ECO function, Fast Heat Up, Easycord
Auto shutdown is
Anti-drip system is
Power cord length 1.9 m
Hose length 1.9 m
Color blue
Features of refilling water while ironing
steam nozzle
cord storage compartment
Scale collector, nozzle for delicate fabrics, anti-lime bar, iron snap-in system, special storage compartment for the steam cord and power cord
SPECIFICATIONS
Iron closed handle
Metal ceramic sole
Dimensions (W * H * D) 27.8 * 35.9 * 47 cm
Total weight 4.725 kg
Completion documentation
DESCRIPTION TEFAL GV8964
Pro Express Control Plus, fast and efficient ironing
one touch!
Pro Express Control Plus uses the electronic Smart Technology Auto Control to control the steam and temperature according to 3 modes (gentle, normal, jeans). Choose the right mode for your fabric and the smart system will select the right temperature and steam power to maintain the preset parameters with the highest accuracy.
High pressure: up to 6.5 bar for effective steam penetration into the fabric.
Steam boost in the spout 440 g / min (for smoothing out hard-to-reach areas).

Olga_Ma
Inna, I already wrote Tefal GV8962 for me, I really like
kseniya D
Quote: Krosh
Girls, does anyone use the Tefal GV8964 steam generator?
Inna, I have one. Year 2 already, probably.
Quote: kseniya D
I live in an apartment, I pour water only from the filter, that is, "dead", everything was fine for 2 years, but now I started to spit, but since I use it every day for 5-6 hours, I have already learned to recognize by sound when something will happen ejection and therefore there is always a piece of rag nearby for this case. But the iron itself is good in terms of its characteristics. I put the semi-professional Italian steam generator in the closet, I like this one more.
On page 20 it was discussed.
Crochet
Quote: Olga_Ma
I have Tefal GV8962

I'll go compare with 64, thanks, Olenka !!!

I saw a personal message), I will definitely answer ...



Quote: kseniya D
I have such

Ksyushenka, thank you very much for the reminder, my dear !!!
Olga_Ma
Inna,
marina-asti
Quote: Olga_Ma

Inna, I already wrote Tefal GV8962 for me, I really like
Inna, I also have one, he is probably 4 years old for sure!
I pour water from the filter (water well), it was a couple of times that I spat, but this is by the end of the period of the main backfill in the system. I love him very much!
Crochet
GirlsI'm just torn between Tefalka and Philips 9620/20 ...

The price jumps to the last one, it's just horror, horror like ...

Take Tefal already?

Otherwise, I still have half a year this is at best I will choose there is not enough evil on myself , and there, you see, something new will appear !!!
Alenka212
Quote: marina-asti
I love him very much!

It is impossible not to love the steam station! You iron and think like you used to iron with an iron ...
Olga_Ma
Inna, I also thought about which one to take, but I chose tefal and I do not regret it, firstly, it can be put on the ironing board, and secondly, the cleaning element there is 2 times longer, which means it will collect more nasty things and save the iron. But it's up to you


Added Thursday, 02 Feb 2017 15:23

Quote: Alyonka212
It is impossible not to love the steam station! You iron and think like you used to iron with an iron ...
Quote: marina-asti
I love him very much!
girls, I agree 150% !!!!!
Alenka212
Inna, only you can determine which functions are significant. For me, the main thing was the presence of auto-shutdown. Now I iron everything on one program. Sometimes I turn on double steam, I ironed a couple of times without steam.
marina-asti
Crochet, Inna, looked at the pictures, my mother Phillips has a slightly simpler model, he is also 3-4 years old already. My sister chose, I did not delve into it, but it is not convenient for me to iron them. Tefal is more comfortable for me (a little heavier, but you feel like it's an iron)
In Tefala, I'm not used to the half-handle, plus it should be at the base. When ironing, the base is behind my back, and the iron is on the board.
If you have an ironing room with a different board layout, it may be convenient to put the iron back in place every time. To put it horizontally while moving / folding things, I don't like it - the sole slips, the iron will make it fall off the board.
Alenka212
I have the base on the board. Plank ordinary with a metal base (with holes) and met. pad for a regular iron. When I iron the bed base, I move more to the platform, I'm afraid to keep it there all the time (the weight is solid). And when ironing ordinary things, both the base and the iron are placed vertically on the board. But my board is always open in the bathroom (I'm too lazy to collect it).
marina-asti
I have the base on the board. Ordinary board with a metal base (with holes) and met. pad for a regular iron.
My board is relatively large and wide, but I am sorry to occupy such a large useful area with a steam generator.
I iron a lot of bedding, tablecloths, towels, I'm too lazy to go over them with an iron once again due to lack of space. I even have a special shelf on the ironer at the bottom, but it's safer on the curbstone)))

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers