Iron with steam generator

Girls, we have a Philips steam generator in Metro (Volgograd region, Volzhsky), more precisely the PHILIPS GC7619 steam station, blue costs 2999r. Maybe even where there is))) Topping up water in the process, although the container does not unfasten, but you can still add, capacity 1.5 liters of water, warming up for 2 minutes, iron everything in one go, that is, without adjusting the temperature and steam , 2-year warranty, during ironing put the sole on the board, it is always cold.

Now I will unsubscribe about myself. I bought the GORENJE SGT2400BT Steam Station with a round "monitor", I used it once so far. I expected that I would stroke a cotton T-shirt from one side (from the back, because the print is burning in front) and I can wear it, but I cannot, wrinkled. You have to get used to it. It is not clear whether it is possible to put the iron while standing or on the sole strictly in the process of turning the T-shirt on the board, if I put it on the base, then the steam residues fly out of the sole and dew appears, then flows down the slope. He can put unnecessary rags nearby (a towel for example) and put an iron on it with the sole so that the residues are absorbed, since the board is a pity (there will be stains from drops) and the base is a pity, a new one.
I also stroked the linen skirt, it turned out very well, but I also twisted it from all sides. I ironed both football and flax on the largest pair and t-re. Stainless steel sole.
Then she put the t-ru "one" and the smallest steam began to iron the polyethylene blouse, the fabric "wet silk", nothing smoothed out (the fabric is worn with the effect of wrinkling) but the smell of sweat disappeared (for some reason I strongly feel on e sweat, and after one wearing).
You can also block the steam supply (the "minus" button on the monitor reduces the steam and completely turns it off) and use dry ironing. I did not try.

Tell me where to put the iron when replacing things on the board.

On my Kercher board, you can put it right on the iron stand, I put it not "on the priest", but face down, nothing drips or drips

[Ovelini]

Ovelini, Thank you.

I'll also write about Burning) It holds 1.2 liters of water, warming up for 2 minutes, steam has four levels, from 1 to 4 bar. I ironed the coat on the board at 2 and pairs at 3. Excellent, I liked it very much. White coat, very good easily soiled, can not be washed, but I wash in the machine at 40 degrees with liquid. means for wool, because the composition of the fabric is 50% wool, 50% polyethylene. I used to iron with steam, but it didn't suit me. Now, finally, I'm happy) On the label, the icon is ironed on the unit, but I didn't even try it. More worried that stainless. the sole will stick, all the days I was looking for a pad on the iron, but nothing bad happened, nowhere was it glazed) I would like the board to be supercharged, since the thickness is visible on the seams.
Continuing reviews Steam station GORENJE SGT2400BT Today I tried to steam off my jacket by weight after washing with a fabric composition of 97% cotton 3% elastane. Beginning with the lapels, I stopped at them) You can steam off, but there are not enough hands. It is necessary to pull the fabric like a hoop, that is, evenly, without sagging and wrinkles. I stroked it on the board.

[Bagel]

I understand that no one has irons with a steam generator. There are no reviews in the internet either.
Bagel, if you find any information - please share.

If this iron really irones bedding that is folded 4 times at a time, this is already big +

They say that it is so. But in real life I did not see it.

Girls, I received my parcel yesterday from Karcher, of course, at first I rushed to try the steam cleaner, but then, of course, my hands reached the ironing system, this is something, I'll tell you))), my husband even connected, for the first time in my life, to ironing , yesterday I taught him to iron T-shirts - he is so delighted, in my opinion, more than I am He, by the way, persuaded me to use the system, I didn’t want to, I said that my Boshevsky iron and Sovdep’s board are enough for me Now I feel the difference

How much did they take? Itself in an active search for an iron. Everyone is advised to take it with a steam generator.

🔗

Thanks, I’m looking at someone like that.

Everyone is advised to take it with a steam generator.

Of course, just an iron with steam and an iron with a steam generator is a big difference, I already do not know how to use a regular iron, and my daughter is even more so, before the school, the blouse steamed right on the hanger for literally 2 seconds - and you're done!

Louisa, as I understand you. I myself cannot live without a steam generator. We bought a semi-professional MIE Stiro PRO 300. It has a constant stream of steam, you can iron and steam at the same time. Smoothes any fabric, even folded several times. Very comfortable. Especially when something is large, such as bedding, or a tablecloth. Towels are perfectly ironed and disinfected. I can't imagine how I used to live without him. I tried not to iron many things, if possible. And now I disinfect the furniture, and steam the clothes right in the closet and you're done. The beauty!

Why semi-professional? What does half mean?
What is the basis for this choice?

Marmura, semi-professional, is something between everyday and prof. The main thing is how it differs from the domestic one in that it has a continuous and more powerful steam supply. Therefore, it smoothes much better and faster than household products. There are also nuances, such as the material of manufacture, durability ...

Marmura, here's another video comparison of household and semi-professional steam generators (if you can link to YouTube, like nothing like that there, I just found it in my bookmarks): it clearly shows how the models differ technically and functionally, and why the price difference is often the same, although it's not a fact that a semi-professional will cost more, depending on which model, there are household ones for 35 thousand

[Rotondi MINI3 (INOX)]

Our choice Rotondi MINI3 (INOX)


Production - Rotondi Group Italy
Professional steam generator with iron for the atelier. Chrome plated body. Boiler made of steel. Steam quantity regulator. The cork handle of the iron allows you to work for a long time without slipping in your hand. Rotondi steam generators have been used in garment factories in many countries of the world and in Russia for many years.

Specifications:
power - 1800 W. (1000 + 800)
pressure - 2.8 bar. (max. 5 bar)
boiler volume - 3.2 liters.
water filling - 2.1 l.
iron weight - 1.5 kg.

Girls! Can you tell me if you need to empty the water from the container after ironing? Or can you leave it?
The instructions do not say anything about this.
Gave Philips 9620/20 tested today, super!
Now ironing is a pleasure!
Here is such a handsome man

[Hope]

Hope

Do I need to empty the container after ironing?

Pour out always, from any iron.
Pre wait until it cools down, certainly!

Do not pour from the tap! At least after the filter.

[Iskatel-X]

Iskatel-X, Thank you!
Honestly, I did not pour out the iron, but it was used every day
Pour filtered.

[Jouravl]

Jouravl, it is not necessary to pour out of the container, the water is not in the iron itself, I have been using the same for three years, everything is fine

I have the same iron, I have been using it for the second year, I am very satisfied. The water has never been drained.

Always pour out, from any iron.

Gee. And how exactly?

I don’t drain either. I have Tefal of the same plan. True, I use it every day.

[Lena]

Lena

And how exactly?

Unscrewing, tilting, flipping.
I have:
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=3272.0

[You strongly recommend]

Unscrewing, tilting, flipping.
I have:

This is not "any iron" from which You strongly recommend drain the water after each ironing. The question was "how it should look" in a normal steam iron. Will you answer? It is desirable with a reference to the instructions, otherwise I may really be dull, but there is such a line ... But kill me I don’t understand that in Phillips you can "unscrew" every time.

[Lena]

Lena, you're wasting your time. We are talking about an iron with a steam generator, the name of the topic is. The steam generator itself has an inlet hole, and there is a plug in it (I do not remember its exact name). This plug must be unscrewed, the tank of the steam generator must be turned over and the remaining water must be drained. I have had such a device for a very long time, and although they pour filtered water into the tank, if you drain the water, you can see impurities. I do not drain the water after every ironing, occasionally.

[Iskatel-X]

The water still needs to be drained, if you watch the video, how steam is formed, then all questions disappear immediately, and Iskatel-X, absolutely right. The water must be clean, otherwise you can ruin the entire system.

You only need to unscrew the scale protection, but this is not so often.

Lena, you're in vain. We are talking about an iron with a steam generator, the name of the topic is.

And, if we are only talking about a steam station, then there are no questions, you cannot argue with that. It's just that I usually read as it is specifically written - "any iron" for me clearly means not only a steam generator, but any iron as well. Probably not right. I am aware of my guilt, measure, degree, depth ..

I hasten to share my joy! Yesterday I became the owner of the Tefal8962 steam generator! I chose for a very long time, I don't like ironing at all, and my husband refused to buy an iron for 30 thousand (it's still an iron)! At first I also wanted Philips 9620, but I came to the store and decided to buy Tefal, firstly, you can put it on the ironing board, but Phillips is not, and the Tefal cleaning rod is larger than that of Phillips. I stroked it today, everything is smoothed out with a bang, I am very happy

I bought myself an iron with a spam steam generator, I was looking for an inexpensive one, the consultant in the store said that it was a novelty. At first I doubted him, somehow he seemed very simple to me, and then there were no reviews about him at all. But still she took a chance. At home in the evening I immediately tried it. Surprisingly, this iron turned out to be quite powerful, despite being lightweight and compact. Smooths well, even jeans succumbed to him, as well as a cotton shirt. It is clear that this iron has no unnecessary bells and whistles, it is simple in design, but everything I need it does.

[Nadenka]

Gave Philips 9620/20 tested today, super!

Nadenka, are you still happy with the gift?

No complaints?

I kind of decided to buy ...

I hasten to share my joy! Yesterday I became the owner of the Tefal8962 steam generator! I chose for a very long time, I don't like ironing at all, and my husband refused to buy an iron for 30 thousand (it's still an iron)! At first I also wanted Philips 9620, but I came to the store and decided to buy Tefal, firstly, you can put it on the ironing board, but Phillips is not, and the Tefal cleaning rod is larger than that of Phillips. I stroked it today, everything is smoothed out with a bang, I am very happy

Olga, congratulations! !

[Nadenka]

Nadenka, are you still happy with the gift?

No complaints?

I kind of decided to buy ...

Crochet, Innochka, I'm not entirely satisfied, after three months of use he started spitting water, so I can't recommend him 100 percent now. Maybe I came across such a copy ???
but I still like him!

Olga, congratulations! !

Tanya, thanks

[Crochet]

I don't know if I made the right choice or not, but I ordered this model here: Tefal GV 8461E0, they will bring it on Thursday, so there is still time for reflection.

Continuous steam 120 g / min;
Steam pressure 6 Bar;
Steam boost 260 g / min;
Removable water tank 1.8 l;
Fast heat up system - heating time 2 min;
Unique collector rod for collecting scale;
Unique self-cleaning soleplate Autoclean Catalys - burnt particles simply evaporate from the surface of the iron when heated;
Topping up water at any time;
Unique snap-on iron system - easy to carry and store;
Optimal temperature setting for fast and quality ironing;
Auto power off;
Eco function - energy saving up to 20%;
Automatic cord rewinding;
Special compartments for storing the cord for supplying steam and power cord;
Vertical smoothing;
Stainless steel boiler;
On / off indicator light, boiler cleaning indicator;
Easycord system: cord does not wrinkle fabric;
Comfortable handle;
Power 2200 W;
Made in France.

Does anyone have experience with this unit, please respond

Crochet, Inna, and I'm very happy with mine, she has been working for 4 years without any complaints

[Nadenka]

after three months of use began to spit water

Oh ...

What is he?

Thank you so much, Nadenka !!!

and I'm very happy with mine

Svetlanochka, such a model is no longer so easy to find on sale ...

Thank you, my dear !!!

Yesterday I became the owner of the Tefal8962 steam generator

We have it even more expensive than Philips 9620/20 ...

[Nadenka]

Oh ...

What is he?

Thank you so much, Nadenka !!!

Svetlanochka, such a model is no longer so easy to find on sale ...

Thank you, my dear !!!

We have it even more expensive than Philips 9620/20 ...

When I bought it, I looked, but in the media market it is twice as expensive

[Crochet]

Crochet, Inna, I really haven't descaled him yet,: girl_red: I'm waiting for a signal from him, but he doesn't give it.
My daughter also needs a steam generator, I'll probably buy the same one anyway.

[Crochet]

Crochet, Inna, I really haven't descaled him yet,: girl_red: I'm waiting for a signal from him, but he doesn't give it.
My daughter also needs a steam generator, I'll probably buy the same one anyway.

I cleaned it, pulled out the rod, rinsed it, poured out the water. the water was slightly cloudy, and all normalized !!! ... Apparently, he is very sensitive to the formation of scale, and therefore spits on the hostess

I cleaned it, pulled out the rod, rinsed it, poured out the water. the water was slightly cloudy and everything returned to normal !!!

Urrrraaaa !!!

So you can take it !!!

Reflecting, 19 vol. normal price for this iron, or look else?

I also spit, sometimes even some kind of rust (, everyone swears, things can be spoiled (((
Moreover, you iron and everything is fine, but at some point it may spit, it is impossible to iron white things!
I already have the second, the third in stock, my husband bought it for some reason.
Now I have Tefal Pro Express Turbo, 260g / mm, 6bar.

Tefal Pro Express Turbo, 260g / mm, 6bar.

I also have almost the same, 6 bar and 340 g / mm
Occasionally, it also gives out rust, pour water into it from the filter and try to rinse the tank every 3-4 months. Ira, I think it's water. We have some excess in iron. Apparently, if you pour water before flushing the system completely or when it's time to change the filter, then the iron will give it. My sister has the same in my apartment - she doesn't spit)

[Marina]

Marina, here we are in the apartment when we lived, this was not. I sin, of course, on the water. We have powerful filtration in our house, apparently some kind of component still exceeds the norm. We need to hand over water for analysis.

[Irina F]

Irina F, apparently the water is still "alive". We don't kill her with bleach as in the city.

Moreover, you iron and everything is fine, but at some point it may spit, it is impossible to iron white things!

And what, buttons "self-cleaning" are not present in it, or what ?? I have a regular iron, too, if you do not clean it for a couple of years, it starts to spit nasty things unpredictably. I take it out onto the balcony, take a large old light rag (a former sheet or towel) and start to "spit" on it with an iron forcibly. Such an abomination flows out that one wonders - how is there so much of it ?!

After several topping up of the tank, the escaping dirt gradually disappears, but at first I still try to iron only dark fabrics. More precisely, I start cleaning before ironing dark. And then everything is fine.

I also have almost the same, 6 bar and 340 g / mm

And I have one. I live in an apartment, I pour water only from the filter, that is, "dead", everything was fine for 2 years, but now I started to spit, but since I use it every day for 5-6 hours, I have already learned to recognize by sound when something will happen ejection and therefore there is always a piece of rag nearby for this case. But the iron itself is good in its characteristics. I put the semi-professional Italian steam generator into the closet, I like this one more.

[hours for 5-6]

I use it daily hours for 5-6

Heroic girl !!!

This is not because of my great love for ironing, I can not stand it. I sew custom-made clothes, and a good ironing is half the success But home linen, almost everything, is ironed by my husband

My mom does ironing at home.Completely! I practically do not touch, so sometimes, if something urgent needs to be stroked.
Sometimes, after the dryer I fold it and don’t give it away for ironing, especially the towels, they are so soft after the dryer. Mom really swears, says that everything needs to be ironed)

Girls, I have an ironing system Laura Star, old already, I once went to the service, for the button, and there in the window the sole of the iron with a hole is exposed. In reality, there is a small hole in the sole of the iron.
I asked what is it? The receptionist answered that it was a breakdown from soft water. That is, they DO NOT advise pouring softened, especially distilled water into the system. Recommended from the tap. And do the cleaning periodically.
And while I just got into the habit of pouring soft water, I brought eggplants from the dacha just for ironing. Has ceased.

[Irish]

Now I have Tefal Pro Express Turbo, 260g / mm, 6bar.

Such, Irish :

is he almost 87 t. p. worth some abnormal immodest money is worth !!!

Or on that site, they simply nabrahmaputril with a price tag ...

[Twig]

Twig, and what material was the sole, steel or aluminum?

Added Sunday 20 Nov 2016 03:34 PM

And do the cleaning periodically.

How's that?

[Crochet]

Crochet, Innus, just like that! But, with the price, I think they were wise)))
I honestly don’t remember how much my iron cost and when we bought it because I’m already tangled up in my irons.
I know it's not cheap, but not as much !!!!
We need to look for documents)))

Added Sunday 20 Nov 2016 04:29 PM

Krosh, I found it:
🔗
The cost is 24890 rubles.

Irina F, Irish, I also have such an iron until it spits