Iron with steam generator

Girls, I have a steam station for a very long time, without it there is simply no life. My base is on the floor, there is a silicone sole for the iron on the board and I put my iron on it, because it does not stand vertically. Such an iron makes life much easier, an irreplaceable thing in the household!

[Kara]

Kara, Irina, There are good irons that steam very well (I have one, but I have to run to fill in water very often during ironing), and the ironing system is ... filled and I don't need to run after water (I hate ironing myself. If I chose now, I would buy the system ...

[Kara]

I hate ironing, so I would quickly get loose and do other more pleasant things

Kara, Irina, sister!
I also hate it and lack of willpower. Therefore, my linen is often dry and difficult to iron.
I used a steam iron for a long time, but when I bought the station, I realized that it was heaven and earth!
I managed to drop my first station and it cracked. It was impossible to use it and I did not iron anything at all until I bought a new one - I could not return to the iron.
Just keep in mind, it is advisable to iron on a board and preferably on one that is intended for steam stations. The fact is that the couple goes out a lot and I ruined my table, on which I always ironed. Now I have a special board and if I iron a lot, water can drip a little from below.

Sveta, I have a regular trowel.

which is designed for steam stations

What is this?

What is this?

I'll wait and listen. I seem to have a good one, but the basis is a metal mesh. Water ... yes, it drips and decently

I'll look for it. But the point is just that it is not made of a solid piece of wood, but of a metal mesh.
Let it drip, but not warp from moisture.
I have ironed on the kitchen table all my life. I bought a new table, and its tabletop is as if glued together from wood and artificial stone. So from this steam everything fell apart.



I have this:

🔗

Very comfortable but very large. If the problem is with the place, don't take it. I found where to put it folded. And I pretend that it is very large and heavy and I myself cannot cope with it for anything. So my men put it on and take it away for me.

Hello ! I'm standing listening! May I have a question? Will the steam station work vertically or only on the ironing board? And in general, is there such a vertical apparatus that would steam any thing at once? Or is it in advertising only?

And in general, is there such a vertical apparatus that would steam any thing at once? Or is it in advertising only?

at times this is only in advertising, when I tested my station I steamed vertically (it has a vertical steaming function) - it worked out fine, only the iron is hard to hold on weight.

Thank you ! Will seek...

only the iron is hard to hold

I watched how it is done in clothing stores. they have such steam stations with a nozzle, like a vacuum cleaner for furniture, which is flexible on a corrugated tube. Can I explain it clearly? This is how sellers steamed clothes for hangers in the hall

But in stores, things are still new, and at home, after washing, they are sometimes so wrinkled that it is sometimes difficult to steam off - because of this, once again, you don't want to wear linen or natural silk things - while you iron them ... So they lie in the closet ...

they have such steam stations with a nozzle, like a vacuum cleaner for furniture, which is flexible on a corrugated tube.

mine is the same, but it really does not steam everything the way I would like ... that is, not all things.But for jackets, outerwear I use only it

but in general, who gets used to what, when they bought the vertical station, they ironed almost everything with it, even the bedding on the board, and then somehow jumped over and switched to the iron

[thet]

thet, I have a complete assortment: steam station, steam generator and steam brush. My personal experience is that most of all the steam station hovers windy 9 I have an ordinary one. not vertical, but there is a steam boost). She steamed off two coats that came by mail with Ali. It turns out mentally. But the heavier the iron, the harder it is to float vertically and the base must be dragged from the board to the hanger.
I tried to steam the curtains (the veil is everywhere) with a steam generator. Well, not that from a typewriter, but for me there is a slight bruise. Did not like. I iron in the old fashioned way with a steam station on the board. Then perfect.
Only slightly wrinkled synthetics can be steamed well with a steam brush.
So for me the steam station is one of those devices. which I will never give up.

P / S / My board is simple, but with a metal base, in which there are holes. But nothing drips and the board does not get wet. I iron on eco-mode.

Girls, have you seen Braun steam stations? I was in the store and noticed that they have a rounded sole that is convenient to iron in all directions. My Braun 18 iron died, he just turned the lower part away from the upper one, so I think what to buy in return, but I want to buy the station now, help me out - I've been ironing with a small travel iron for 3 days

but from a metal mesh.

Well, like all the ironing boards with a metal mesh

Perhaps I am not aware of the latest trends. At the dacha I have an old board - just chipboard, trimmed with fabric. Maybe they don't do that now. I warned you just in case.

Girls, thanks a lot to everyone !! I will order an ironing system. I can love to iron

Girls, and someone has such a wonderful wardrobe

🔗

Ilmira, I saw him alive in the store, such a grave

such a grave

Well, this is clear from the picture. I'm wondering how this cabinet works, though without participation it can do everything. Not to buy, so to dream: shoved - pulled out, everything is ready!

I'm wondering how this cabinet works

And I looked at the technical characteristics, I'm not interested anymore ... He will eat electricity with terrible force - for 4 things, 1850 W This is definitely not a thing for Europe with our electricity tariffs

Alenka 212! Elena ! Is the steam station the best out of your fleet of steamers?

Well, it seems like all the ironing boards with a metal mesh

well, yes, now everything is with her and for a long time, except for the type of dressers ... I also have one with a net, but I'm too lazy to carry and my son and I made one

My son did everything, (including wrapped it up without my knowledge), I wove the drawers .... it's more convenient for me than folding and pulling out the usual one every time, I don't have an ironing room

[thet]

I can love to iron

Unlikely. It's just that it will take less time.
I do not like ironing either, but the family does not recognize bed linen as ironed. Now I don’t worry if it’s dry or not. I put it in the bathroom, and in the morning, when I prepare things for work / school, I iron it a little. And there is no need to kill time separately.




thet, this is purely my opinion. I just don't like unfinished linen and clothes. A cotton brush and steam generator cannot be ironed to perfection, as I need. And I prefer things though made of fabrics close to natural. Although I know that I will now sit in the car and wrinkle.
And someone will pull the thing out of the closet and put it on. So a steam brush for his good. And for me, she is the most unused device, although many are delighted with her and even abandoned the irons.

I have this

I have one to one the same !!!

Thanks for the answer Alenka 212! Elena I also love that the thing was well ironed ... Now I will dream about the station ...

I have one to one the same !!!

and I buy this.Long chose and
She stopped at this Phillips. By the way, they have 3 sizes. And then my old one jammed. Now the seedlings are growing on it😆.
Ira, take an iron with a steam generator and don't hesitate. And you do not need to be heavy, due to steam it strokes almost on weight and several layers. The lighter, the more convenient.

Ira take an iron with a steam generator and do not hesitate

You mean the ironing system?

You mean the ironing system?

Call it what you want. I have such an Iron with a Domena Easy Box Neo steam generator
5 years soon. I'm happy.

Yes, it is not placed vertically, only on the sole. For 4.5 years I have changed 1 cartridge for water. I hate ironing too.

I bought this Philips GC7703 / 20 FastCare steam generator, model 2016.
Selection criteria for me
1) Simplicity, no marketing bells and whistles that I will not use.
2) Ability to adjust the temperature on the iron.
3) Ability to install vertically on the board.
4) Movable cable-hose reducing to an imaginary probability of breakage at the iron handle.
5) Silence.
6) Removable water container.
7) Iron weight.
8) Compartments for storing cables on the base.
9) Ease of descaling, without unnecessary financial investments.
10) Price
First impressions, ironing gorgeous without steam, with steam just super, steaming vertically, though the hand gets tired.
One small minus, there is no auto shutdown.

Took a pig in a poke -Philips GC7640 / 80. I was tuned in to the lightness of an iron, but when I came home I got it, and it is heavier than usual (I have a Bosch, an old one, but beloved because it soars very well, only I have time to fill in water, there is also Brown with a removable sole, and some other .. .) weighed the iron more than 1.8 kg, you need to get used to it, but the first impression is wonderful,

Girls, help me, something I'm probably doing wrong
They brought me this miracle. Firstly, the iron is very light, weighed it directly, weighs 1128 grams.
Should steam come out of it only when you press the button on the handle? (so my finger will fall off after ironing 2 sets of bedding)
I tried it on towels, the temperature of the sole is such that I can calmly keep my hand on it. Is that how it should be? Without steam, nothing is ironed at all, not even silk.

[Kara]

Kara, Ira,: rose: you double-click on the handle, there will be constant steam.
The sole does not heat up, it smoothes with hot steam. After the readiness signal, you need to wait a little. Get used to it, look at the instructions, I have a different one, but the principle of these irons is the same. Good luck!
Congratulations on your excellent helper

Nadyushenka, that is, press twice in a row, and then he himself will soar? In the instructions, like, if you press twice in a row, it's a steam boost

that is, press twice in a row, and then it will soar itself?

Yeah, Irish, at least that's how mine is ...

And the iron itself is also light, I personally would like to be heavier, of course !!!

But even with its low weight), it copes well with the task, but ...habit ... i always liked specific such heavy irons ...

How is the sole not heated. In the same way, heating and supply are heated and regulated, and the steam power is also regulated. The button is conveniently located and I automatically press it when I need it. You will get used to it. Ironing clothes cannot be compared with a regular iron.

In the same way, heating is heated and regulated

Irish, there is no temperature adjustment in my, he kind of adjusts himself, and there is no steam power adjustment either. I got used to my old Phillips, there it was really possible to get a burn at the maximum temperature. And this one is warm for me
Thank you girls, I'll try as you advise.

[Kara]

KaraIra can hand it over to you before it's too late.

and I do not understand how the sole can not get warm. And if you don't need steam? Should you keep a separate iron? My iron is heating from the station, and you can even adjust it, the scale is from 1 to 3

In mine, too, neither temperature nor steam power is regulated. These are innovative irons, they adjust themselves to fabrics, you can iron cotton, and then silk.You don't need to switch anything, yes, it's unusual at first, and then you understand how great it is,

[Jouravl]

Jouravl, Hope,

That is, please explain to me - if I iron a cotton shirt, and then start ironing a silk scarf. What does an iron do? He won't burn his scarf until he realizes it's silk?

[Svetlenki]

Svetlenki, Sveta, he will not burn anything, I just iron it without taking the linen apart, I take it apart after ironing. Calmly after the shirt, put a scarf and nothing will burn !!!
These are such technologies at Phillips, class, you can not strain yourself by selecting the temperature.
I have been using it for two years and not a single spoiled thing, and most importantly, my husband fell in love with ironing and ironing himself, he says she is a pleasure from the process

🔗

[Jouravl]

Jouravl, Hope, what a score! I've never even heard of such an innovation! I have a "stupid" iron

Nadyush, in !! I tried the "turbo", it's a completely different matter.

[Kara]

Kara, Irina, Irish, you get used to it and very quickly. To the good
The iron is cool, the roller clearly shows that the sole does not heat up, the ball would burst, it warms up from hot steam. And I also put it on a marble table, not on a stand, nothing cracked))).

Girls do not laugh. In order for the iron to recognize the composition of the fabric, it must cost as Boeing and at least have sensors on it. Of course I'll google it ... watched the video. Eco and turbo modes and there is power adjustment. The principle is the same, only in my iron you can still iron without steam. Sometimes you need it.
Googled. I liked the model 9682, it seems with the function of intelligent steam supply. There really are sensors. But this is a pure water steam generator. Googled the price ... yes Boeing 36000 ...

[kil]

kil, Irina, well, before writing like that, you need to be a real user or google first
ECO mode is an economic mode, in order to save energy, I do not use it at all.
Here's a comparison model that you liked and mine. The difference in power and in shutdown and self-cleaning modes.

Well, I've been using it for 5 years. And including the Eco mode too. And you haven't convinced me that just a steam generator is better than a professional iron with the same steam generator. For 5 years, I also did not burn a single scarf. I won't argue anymore. In addition to Eco mode, I can also adjust the power of the steam boost and the temperature of the sole. Instead of constantly having a steam hot shower while ironing.
Probably the models starting with 9 are already all with intellectual steam. Irinka's model is without. This is exactly what I liked about this steam generator. When it breaks down I will look for an iron with a steam generator with such an inclusion. but by that time they will think of something else, I hope.

And you haven't convinced me that just a steam generator is better than a professional iron with the same steam generator.

Ir, a professional iron is certainly good, but I’m not ready to pay 20 thousand for this economy. +

Eco and turbo modes and there is power adjustment

As far as I understood from the description, these modes regulate the steam supply, and not the power of the iron. All my life I stroked with an iron, first with a cast iron, which heats up on a gas stove (and that's when I took heart for the rest of my life and hated this business, well, a difficult childhood, instead of toys, a cast iron iron), then the usual one, on which the heating level is regulated and steam level. My Phillips failed "soar" at all, no cleaning helps. If there was an opportunity, I would buy exactly the same. But there are no more on sale. The ironing system is new to me. To be honest, after reading the reviews, I ordered an iron first, and not that the cheap Philips PerfectCare Azur GC4922 / 80 for 7 thousand. They brought it, tried it, well, finally, it doesn't iron !!! Absolutely !!! I returned it. I decided to listen to smart people and ordered an ironing system. It’s strange so far. Maybe I'll really get used to it.

Ira, in addition to the eco mode, I have 2 wheels on
Base-steam generator. And 1 wheel on the iron itself where you can adjust the heating, steam power, and the amount of steam.
Ie.I repeat once again that I have 2 in 1. And an iron and a steam generator.

In general, while on turbo mode, I ironed shirts and pants for my men for a week. Everything seems to be sorted out normally! Maybe we'll make friends with him Thank God, otherwise I didn't even know how to return the second iron to ozone