Iron with steam generator

I don't even doubt that you will make friends.

[Kara]

Kara, Irina, and what system did you take? (I didn't write the stamp, they let out their darkness, I don't know why ... but my iron is heavy by weight, I already wrote about it,
You will get used to the system, and to the fact that you need to hold the button, etc.

[Irish]

weighed it straight, weighs 1128 grams

I wanted to weigh my own), alas, the cord sticking out of the "priests" interferes ...

Irish, a your iron has a separate life Is your iron detached from the lace?

I just iron without taking the laundry

I have the same system !!!

No switches ...

Both delicate fabrics and jeans, I iron everything in one mode ...

I tried it on towels, the temperature of the sole is such that I can safely keep my hand on it. Is that how it should be?

Alas, this is a payback for the "automatic" iron, so that it does not burn nylon or polyester after the cotton is ironed. Alas, the iron cannot drop 50-80 * C in a couple of seconds. Inertia of the sole, you can't get away from it. For the same reason, automatic irons are made as light as possible to reduce thermal inertia.

Kara, Irina, what system did you use?

The same as yours, Philips GC7640 / 80 Therefore, I was embarrassed that the iron itself is very light.

I wanted to weigh my own), alas, the cord sticking out of the "priests" interferes ...

Irish, and your iron has a separate life, your iron is disconnected from the lace

Doesn't detach. I held it with my hand

For the same reason, automatic irons are made as light as possible to reduce thermal inertia.

The one I took first was also automatic Philips PerfectCare Azur GC4922 / 80, but it was very weighty

[Kara]

Kara, Irina,

that the iron itself is very light.

It's strange, I have a heavy one, and I wrote that it was even harder than usual, while stroking my hand from habit, I was just tired of the heaviness ..

Girls, tell me, does anyone have Philips SpeedCare? How is it in operation? Or should you look for a more advanced model? Unfortunately, the budget is limited, but absolutely impossible without an iron.

Unfortunately, the budget is limited, but absolutely impossible without an iron.

12,000 rubles ... nichosi limited budget

Maybe we will make friends with him

In short, we became close friends! For two days I iron everything in a row, ironed everything that I would not even have looked at before (towels, sheets with an elastic band, etc.). Girls, thank you very much !!! And for advice and support. These new systems really take some getting used to. If it goes on like this, I might love to iron

[Kara]

Kara, Irina, does it cost that much? I understand that this is one of the simplest models. Found on Avito for 3000, and all in thought to buy or save money for new money

Irina, this model is not found anywhere, neither on ozone, nor on the player. In the official store, it costs 12,990 rubles.

🔗

It is clear that they are always slightly more expensive than in chain stores, but not 4 times. And on Avito b / ear, probably. And judging by the price, it was rolled to death

In short, we became close friends!

Wonderful!!!!

It is clear that they are always slightly more expensive than in chain stores, but not 4 times.

Irin, and you saw the price of yours there, look, almost the same price (compared to Ozone)

🔗

and if we compare it with the model that Irina (another) considered, then ours from the officials is almost 2 times more expensive

Irin, and you saw the price of yours there, look, almost the same price

Sveta, so it costs about the same everywhere, there is just a discount on ozone now. And in other stores it is not available

Found on Avito for 3000, and all in thought to buy or save money for new money

Irin, I looked at it (I think this is the one who sells Eugene, he?) Everything can be expected from men, it is written in perfect condition, if there is such an opportunity, I would have phoned and looked at it, it is possible that they simply do not use it, many cannot get used to it right away, it is a pity that the photo there is no sole, you can write to him on Avito to add a photo of the sole itself

so he is like this everywhere and costs

get crazy , when I monitored, they were available max 14 thousand, and the officials had everything almost 2p higher ... No, well, I think the price of Ozone is more reasonable.

The ozone price was a decisive argument for me. I plowed a bunch of information, ironing systems with similar parameters cost from 11 thousand rubles and more everywhere

max 14 thousand, and the officials have almost an order of magnitude higher

Ten times more?

The ozone price was a decisive argument for me.

everything is correct, and to Ozone, plus the fact that God forbid hmmm something, then they solve everything without problems. Although I have it completely free (I wrote that for VTB points and took the collection through the bank), I received it at the Ozone point and they guaranteed ...

Ten times more?

no, almost 2 times (about the order I bent

All the same, some terrible prices.

Girls, in Eldorado promotions for some models, mailing comes to me

#

[Jouravl]

Jouravl, Hope, no, more humane prices on Ozone

[Svetlana777]

Svetlana777, Svetlana, yes Eugene sells. I'm just going to Krasnodar the other day and I can touch it (not Evgenia, of course, but an iron) Are there any points that you should pay attention to and refuse to buy? The state of the sole is clear. Maybe steam? But how Before that I had Tefal, bought in 1998. A few days ago, it fell apart completely. I covered it with duct tape and I don't let the children get close. I'll be patient for a few more days. And now I am intensively studying irons so as not to buy some nonsense.

[Thurtle]

Thurtle, Irina, of course, you need to check for steam, For me, the decisive argument when choosing (the price was the same) Tefal or Phillips was a large presence of holes for steam to escape from the second, especially in the narrowed part. At Tefal they were one happy in an arc, the nose of the iron did not steam at all ... Of course, if you have "extra" funds, you can put a lot of requests,
The one that you are considering is, in principle, a normal iron, of a classic shape - so you can put on "ass", there is a steam regulator, I looked at the description, I liked it. Therefore, the matter is small - so that Eugene's words do not diverge from reality ... that is, so that the state is ideal ... You will write later what and how ... good luck.

I bought myself a tefal 9070 steam system on computeruniverse, it cost a little less than 9000. We have 14 thousand in the left stores, I decided because Tefal, like Phillips, has a world guarantee.

I can and will love to iron

I also hoped for it.

Nope, as I didn’t love, I don’t love it ...

But I stroke ...

But I stroke ...

Oh, Innus, where can we go

Girls, I came to say thank you so much again !!! The steam ironing system is just class. I'm used to it, I almost enjoy it. Not that I fell in love with ironing, but the process went much more fun

[Svetlana777]

Svetlana777, Svetlana, I am reporting: the purchase never happened. Eugene and I did not meet. I came to Krasnodar for the June holidays, and he went to the sea. Then we could meet (he visits the area of ​​the village where my parents live for work), but that day I left for the funeral. Then I decided not to bother with a personal meeting and paid for the iron with boxberry delivery. Eugene for some reason did not send it, although he knew that I was buying it. While I was on vacation, there was no time to look for another. Now I will continue to study the irons further, but for now I iron with a little travel

paid for the iron with boxberry delivery.

Oh, not a fig for myself, and why the money was gone or what?

No, Avito returns the money to the card if the seller has not sent the goods within three days.

No, Avito returns the money to the card if the seller has not sent the goods within three days

, damn it, but I didn’t know ... Thanks for the information, Well, here it means the prod decided - such a cow is needed myself ... but I forgot to tell you

there was a similar situation in the little Redik multi's Temka, they put it up for sale on Avito Redica 02, our forum member agreed to buy, they began to change their minds about selling something (apparently they saw the demand for Redik, we corresponded in a personal ... for three days they didn’t no) .. then she offered them an amount more than they were selling, then they probably went crazy from this and eventually left the cartoon for themselves .. we were outraged by this, but did not understand - put it on fig if there is any doubt about its need , people fool their heads ..

[Kara]

Kara, if it is still relevant I have a professional silter stainless steel sole, very heavy, never stuck, I bought fluoroplastics a comfort nozzle from weasels (weasels are shiny marks on some fabrics at the seams remain, on velvet, velvet)

Dear ones, no one has come across the following situation - no steam supply ...

Studied in the instructions problems - possible causes - solutions , nothing helps ...

The iron itself heats up, but the steam does not give ...

[Crochet]

Crochet, Innus, what kind of steam generator?

[Olenka]

Olenka, Philips GC9650 / 80 PerfectCare Elite Silence .

[Inna]

Inna, I have tefal, when it does not feed, the button for cleaning flashes

[Kroshik]

Philips GC9650 / 80 PerfectCare Elite Silence

Kroshik, but did you try to call the hotline? Or a service? It happens with us that some manufacturers have smart telephone "problem diagnostics".

Just as an idea - an opportunity to solve a problem

The support service helped me with the manual Dyson. He cut out, worked in jerks, although I wash all the filters regularly. It turns out that it was necessary to "knock" one filter on the table

[Olenka]

Olenka, I descaled it, although he did not ask me, it did not help.

Yes, my iron will not turn on if suddenly the scale starts up).

Firefly, I thought to call, yeah.

I'll just figure out where to call and try).

And after all, everything works as usual, but there is no steam.

Go know what he needs ...

Go know what he needs

maybe the pump grunted, mmm,

I saw in Eldorado in the summer at a ridiculous price, 3.5 I think to grab something, in general I went after him, but he was not on the stock, but at a markdown, they changed the fee, and the pump, and even the hose ... in general I didn't listen to the list of what was there, but ... here Phillips are bastards, that kind of money they fight for equipment, but they don't monitor quality

,

[Crochet]

Crochet, maybe he's still under warranty? Phillips is usually 2 years old

Girls, I want to buy myself such an assistant.
Tell me what you need to pay attention to?
What are the best technical characteristics?
Power, steam pressure, steam boost, continuous steam,
The volume of the water tank?
I would be very grateful for your consultation!)))

[Oxanaev]

Oxanaev, Oksana, I always tell everyone that before buying a not cheap, advertised household iron in a plastic case, you should always carefully look towards professional or semi-professional equipment. Household irons in a plastic case are constantly changing shape, design and are not repairable. But for the same amount of money or a little more, you can buy a professional iron with a steam generator, which works for days in ateliers, mini-laundries, made of durable materials - the body itself is made of metal, a handle is made of wood with a cork, holds a lot of pressure, there is a built-in barometer, all maintainable, all spare parts are sold to it in the service, to the last spring. Such professional irons with a steam generator work 24/7. And household appliances in a plastic case will break down and buy a new one again, but at prices they are almost the same as professional irons.Look, look for a line of Lelit, Silter and similar professional ones, compare prices, service, always availability of spare parts. And the price and quality will always be on the side of professional equipment, just in household appliances stores, disposable plastic (before a serious breakdown or with a short lifespan) cost as much money as a high-quality, convenient, indestructible, absolutely repairable professional iron with a steam generator. Your task is to go deeper into the topic. google professional equipment for wet heat treatment (WTO), find a model, compare prices and immediately find out where the sales and repair center with spare parts is located closest to you. It's a long, exciting journey, but well worth it! I personally have a Silter steam generator, a Lelit ironing board with vacuum and blowing. heating and foot pedal.

I also have a Silter Gazelle, I love him

I also have a Silter Gazelle, I love him

Here, sister!

[Creamy]

ironing board Lelit with vacuum, blower. heating and foot pedal.

Well, vooot, only my Wishlist was reduced to a minimum, and then the mention of the ironing board of the company of my favorite steam generator I'm almost starting to want it.

Creamy, Alevtina, well, what kind of model, at least voice it, please

[Svetlenki]

Svetlenki, Sveta,, here I honestly tried to consider. but there is a tiny nameplate on the bottom, with microscopic letters, and even on the side from me. I almost twisted my neck, although I was armed with a magnifying glass and a flashlight, but I didn’t see it, it’s too small, and my eyesight is poor. And the passport no longer knows where it lies. Sveta, if the board contains everything I have listed, then this is it!

Found in the catalog - Ironing board with functions Lelit PA-70N

I understood my gazelle, the plastic of the boiler is now glued with tape, but it serves properly. Only everyone who wants such a toy should remember that it heats up for about ten to 15 minutes. And the option to quickly iron the T-shirt 2 minutes before going out is not for him. And I also love fluoroplastics KB nozzle from las

[Ketsal]

Ketsal, Olga, there is also such a nozzle. True, I now more often use a white translucent Finnish Teflon baking mat from the weasels. It is very convenient, you can see everything through it. Yes, and glue glue through a sandwich made of Teflon rugs.

[Creamy]

Creamy, but I would not want an eternal indestructible iron or something else, but then how can I want something after all, this is the very gusto, I wanted it, you read, you read, you look, you look, you search, then you search and buy .. phew .. and so on until the next times.
And so it will be an eternal thing and not interesting

[Creamy]

Creamy, thanks, about the rugs, I didn't know this, but you can take a photo of these Finnish ones and where to buy them

[Ketsal]

Ketsal, they are the same as usual. on which we bake in the oven. My godfather gave me a present, she bought it in some kind of joint purchase. These Teflon mats are thicker, shiny and grease-resistant than conventional mats. And they were very expensive, 7 times more expensive. I myself would have bought it now in reserve. But you can also use the usual ones.

Listen to Creamy, the right advice gives.
My Laura Star steam system broke down in the fall. I worked for 12 years. It was very expensive to repair, I decided to buy myself a new steam generator.
Stopped at the Rowenta Silence Steam DG8963 Steam Generator. Good characteristics are declared, well, the price tag is 16 thousand, such as a share.
At the same time, an active heated board was purchased, in my opinion Lelit.
Well, while I was climbing and studying the issue, I bought a steam cleaner with an MIE Bello iron, also at that time the action was on him.
After a couple of months I can summarize that the declared characteristics are like steam boost and pressure in the bullshit boiler.
Laura and Mia have a 3.5-4 bar in my opinion. Roventa has 7.3. Roventa is much weaker than Laura and Mie.
Now I use irons according to my mood. When the mountain is ironing, I take out Mia.
When in the morning you need to iron a couple of shirts - Roventa. It is more compact, heats up faster and is easier to fill with water.