Dishwasher Safe Do's and Don'ts

Natasha, I'm washing. Both large forms and small ones.

Galina, how do you fold the little ones? do they not fly everywhere? sometimes something small turns over and then stands with water, not washed. I don't understand how to put them, there are a lot of them (cupcakes)?

[Natasha]

Natasha, I try to put something heavier, but permeable to water, for example, a sieve or a colander, on top of silicone molds or on a plastic microwave hood. And if such a form turns over and collects a lot of water, then the PMM program may not end, this has already been written in the topic "PMM malfunctions".

Is the lid removable in your bread maker?

Yes, it can be removed without effort.

Good day! I washed the silicone molds in the PMM. And they were saturated with the smell of detergent (((What can I do? How can I remove it ??!
Maybe a bad detergent ... what is better to use?

[Bunny :-)]

Bunny :-), I constantly wash my silicone molds in the PMM. There is no smell. I use Finish. To remove the smell, try soaking the molds in hot lemon water.

Thank you. huge !!!

I'm a fool ... I didn't expect such stupidity from myself ...

I put the spare parts from the meat grinder into the dishwasher, and they are aluminum ...
all Black
What to do now? new search-buy? or can these be reanimated?

Tatyana, wash them thoroughly with detergent and that's it, you can use it. They, of course, will not shine, but they will not get dirty either. I had the same story a year ago happened, my daughter washed the meat grinder parts in PMM

[Svetlana]

Svetlana, wash with hands, with a brush? Damn, I made my job easier called

Tan, of course, with pens, you have already pushed them into the machine.
By the way, just aluminum comes out of the car as good as new, but its alloys behave so cunningly.

hand wash, with a brush?

yes, with a brush, sponge, etc.

[Marina]

Marina, Svetlana, oh girl ........ how difficult it is

I washed the non-stick frying pan this way. Twice and now I dream when it will completely deteriorate. They don't let you buy a new one. :-)

[marinastom]

how difficult is it

By the way, try rubbing it with a melamine sponge, huh? Then you will tell.) It's really interesting to know, but I myself will not spoil anything in the dishwasher. marinastom correctly says - aluminum comes out dazzlingly white, and I don't wash alloys there.

[Lena]

Lena, I tried it, the melamine is gray, and the aluminum / alloy, as it was gray, remained

aluminum \ alloy as it was gray and remained

try to approach from the other side - restore the acid-base balance to the alloy - hold it in an acid solution - lemon, for example, won't get any worse ...

[Irina]

Irina, I'll try)))) I'm ready for anything, just not to clean it with my hands

keep it in an acidic solution - lemon, for example, won't get any worse ...

No, aluminum is already in the sewer, you can't get it back.))) These alloy impurities remained on the surface. Therefore, they must be erased mechanically. Sif, napkins, rough washcloths, sanding cloth or felt, GOI paste ... I don't know, in short. But mechanical, not chemical. ((
But the former gloss will never be returned anyway, it was obtained in the factory by electrochemical means, if it is called "anodized".

Lena, I tried it, the melamine is gray, and the aluminum / alloy, as it was gray, remained

I see ... Thank you. I'm sorry.

aluminum is already in the sewer, you can't get it back.

what is it all about? current from the top a little bit, you do not have colliders, simple dishwashers

[Linen]

Linen, but figs with him with gloss, they are awfully gray, it's just unpleasant to take in your hands,
and the main thing is this twist, the chtoli stock and how it is there, also luminous, and not made of normal metal
and the meat grinder is a beast, it will grind a chicken with bones and will not choke, sorry mlyn
I'll go to a homemade product, I'll look for parts there, a domestic meat grinder, maybe I'll find

what is it all about? current from the top a little bit, you do not have colliders, simple dishwashers

But just the one that you plan to restore with acid.
But I'm also interested in what will happen if the acid is treated. Maybe nothing, or maybe a miracle.

maybe a miracle.

and she, Tanyukha, in itselfdealwolf gathered, home remedies And Tanya does not want to use, try it, you will tell us, maybe you won't have to go anywhere

[Irina]

Irina, I'll try kanesh))) I'll soak it in lemon))))
I have already tried soda, powder too, zyuzukala sponges, gray dirt flows, it does not become lighter

[Tatyana]

Tatyana, I want to upset you. About 5 years ago, I also washed the meat grinder in the PMM. At first, it darkened strongly and got dirty hands. After I “washed” it, it still remained dark, but stopped getting my hands dirty. This meat grinder still serves faithfully, but it has not brightened almost completely. And yet, I love her very much.

[Galina]

Galina, and how did you launder? all day from time to time I started to wash, and the gray dirt flows and flows

Tatyana, it was like that for me too, I rubbed it with sunflower oil in my wash, and again in the dishwasher, it remained gray, but stopped staining. And she continued to dishwash it after each use. Truth before that, she did not rub it

how did you launder?

Just pens and laundry soap.

[Natalia]

Natalia, and so I'll try too))) thanks)))

Galina, here in the handles the plug is all, laziness zeeeeeeee

I've already tried soda

Even the white will darken from soda.) I somehow put my old one in a bowl of diluted soda ash and left it for a while. As the level of the alkaline liquid was, the meat grinder remained striped - light on one side, dark on the other. If you look well, I'll probably open it up somewhere in the pantry.))

Even the new one has dark spots over the years - where, after manual washing and Fairyk, drops remain in the corner of this thing, which is put on top of the neck. ((Now I rubbed it with melamine - it seems to have brightened a little, but not so dramatically.

Girls, I'm joining your absolutely wonderful forum on a gorgeous site, accept I've been reading for a long time, I have found a lot of good thoughts and warnings. small saucepan. Already 50 minutes have passed since the beginning of the program. The pot was needed urgently. I wanted to pick it up - I probably already washed it (there was fermented milk). So, is it possible to take it out and just rinse it with water and use it, or not, because the rinse aid has not yet gone through. The rinse aid also neutralizes the detergent, or what?

[MalvaK]

MalvaK, Hi! Can. I opened the machine, the washing process stops. She took out the necessary saucepan. I closed the machine, the process resumes from the same place. Nothing bad will happen.

Thanks, and for the promptness too

and I still have my blinds in my typewriter. or rather soap, the machine seems to have ordered me to live a long time. metal blinds are like that, in the kitchen, once a year about soap, there is a plaque formed by grease, dirt, before using soap, it took a bottle of nuclear agent all evening, and besides, you still can't rinse it in the attachment points. and in pm very sincerely, she snapped off the canvases, turned into an untight roll and turned into an intensive wash, the blinds are as good as new.

[Lilyanna]

Lilyanna, but how so in a roll? I understand even if vertical. I also have plastic and metal everywhere, I changed some - I was tortured to wash.
And about the grill grill. I also turned black from the PMM. I washed it with a simple gel and smeared the rast. oil. Then she just rinsed. Now only with my hands and not to shine, with a brush and gel, I dry it and clean it.

[Lilyanna]

Lilyanna, but how so in a roll? I understand even if vertical. I also have plastic and metal everywhere, I changed some - I was tortured to wash.

I fold it about 4 times, that is, not a tight roll, but this one is very free, the water passes and everything is washed perfectly.

All the same, I will not get it - how can you fold them, they will break. Draw something.

[akvamarin171]

akvamarin171, do not suffer ... it can be easier ... so I showed a couple of years ago ...
we pull together so that the place remains ...

and lay out / distribute in PMM ...


Again, if you have a 45 cm PMM, then this will be problematic (depending on the size of the blinds) ..
Washing of blinds in PMM has already been discussed several times .. It still causes a number of inconveniences, in particular, in this case, the inconvenience will be associated with wiping the blinds from excess moisture ...

[* Anyuta *]

* Anyuta *, Thank you. When they stick together, they will not be washed in the dishwasher. Okay, you have to try and search the internet.

When they stick together, they will not be washed in the dishwasher.

For this, a "gap" is left and the blinds are maximally distributed along the length. otherwise yes - stick together when washing

Who has tried washing metal rails from ovens in the dishwasher?
And what about the grates, metal nozzles from gas hobs?

How is it going? Is everything laundered?

Who has tried washing metal rails from ovens in the dishwasher?

Periodically mine. 70 degrees. Washes very well. What has not been washed can be easily removed with Sif or any other cleaning cream. In general, any pieces of stainless steel. The grates are usually difficult to wash by hand, especially if something is accidentally fried. And in the dishwasher - all this washes well.

And I wash it all, the result is excellent.
And also skewers (or skewers?)

Cast-iron grates from hobs are prohibited, like all cast-iron ones.

Ice cream spoon de baer and the like. And I washed it And then I read it has a sign - no higher than 70 or even 65.

Similarly, the meat grinder is a nozzle from Keshik and from Boshik. Clouded. From Boshik soap, from Kesha - I'm already smart and trained with handles!

Cast-iron grates from hobs are prohibited, like all cast-iron ones.

Can we have different cast iron? I mean, painted somehow, or something .. I wash my grilles. There is no rust even in the area of ​​the burners. But there are a couple of points that sometimes still rust and they are from below, on the base, in a place where you cannot see at all. I will erase the rusty specks and nothing will be visible.)

Flax, maybe ...

So I wash my bars. The truth does not wash clean. They are painted by me. I clean the freshly washed ones with an iron sponge. And how new they are.

Indeed, I tried to wash the grates from the old stove, they were already shabby, of course, rusted. On the new steel, it seems, painted ...

Cast iron grates with cooking

The question was about the grates from the oven. They are usually metal. Cast iron, I would not venture into the dishwasher.

[cooking]

Who has tried washing metal rails from ovens in the dishwasher?
And the grates, metal nozzles from gas cooking surfaces?

How is it going? Is everything laundered?