Furniture for kitchen

Gypsy .. why didn’t you like the lilacs .. sort of like the color with orange combined?

No, this is too much .. I already have a lot of flowers, and the kitchen smoothly goes into the salon, and the salon already has gray furniture. The doors will look at the salon, the cabinet frame is white, so the lilac is already well, no matter how .. you need to change it to gray or white

And we did it like this ... It remains to finish the little things. Only now the glossy facades are somehow already scratched, although the film is German, dear ... Maybe there is some means to hide microscratches?
True, somehow they did not think about where to hide the equipment - a grill, a slow cooker, a bread machine, etc. Everything is still worth a useful place. And the cabinets / drawers at the bottom - only on the right, on the left - a washer, a dishwasher and a household waste shredder under the sink are also healthy things.

True, somehow they did not think about where to hide the equipment - a grill, a slow cooker, a bread machine, etc. Everything is still worth a useful place. And the cabinets / drawers at the bottom - only on the right, on the left - a washer, a dishwasher and a household waste shredder under the sink are also healthy things.

I also faced such a problem - there seem to be a lot of boxes, but there is nowhere to hide the overall x / stove, cartoon and the body of the meat grinder - so I left one in one compartment instead of 2 shelves - which is higher, and down just the whole economy will rise! I got a deep drawer under the oven ...

oh my god .. also ventilation .. lately my head is swollen from thoughts .. I don’t even imagine .. how all this should look ... Summer resident .. do you also live in the private sector?

In himself. Our ventilation looks like a round hole in the wall, a plastic sewer pipe is inserted into it. This is in the kitchen, and from the side of the street, the inner pipe is connected with a corner to a long pipe, which is raised above the level of the roof.

In himself. Our ventilation looks like a round hole in the wall, a plastic sewer pipe is inserted into it. This is in the kitchen, and from the side of the street, the inner pipe is connected with a corner to a long pipe, which is raised above the level of the roof.

so you have two pipes? one for ventilation .. another for the boiler ....? Mamadaragaya .. Well, should I put two four-meter pipes?

Rational use of the windowsill in a small kitchen

Super!!! I would not refuse such a thing !!!

Yes, super! And not in a small one either. We have 14 meters, a working surface with the letter Z (pictures of the cherry kitchen above), and there is not enough of it. A wide window sill helps a lot. I regret that the sockets were not integrated into the slopes ...

Super!!! I would not refuse such a thing !!!

In my old apartment (where I planned the kitchen myself) there was a similar window sill, a continuation of the countertop, wide, but only with an even cut. You just need to plan everything before the windows are replaced so that the height of the lower cabinets (countertops) and the window sill is exactly equal.

Wow !!!

I have a wide sill from the kitchen counter, so was the problem with current windows in winter. With this window sill, we blocked the flow of hot air from the radiator up to the windows, and the windows began to "cry". there was a sea of ​​water, the slopes began to bloom, they did not have time to wipe it. Now the problems have been partially solved by sawing holes in the window sill and placing gratings there (intended for doors to the bathroom

It seems to me that the problem is in the window. Something was done wrong and the inner glass turns out to be cold and comes into contact with the warm air of the kitchen, therefore it fogs up.

I didn't have anything like that, I think that everything is fine with the new owners of my kitchen. The window was not plastic, but made of wood, but with a new technology, i.e. a double-glazed window.

So good. And what's in the two cabinets after washing? As far as I can see, there are two 40cm doors.

In, an insight came. The problem is in stocks :-))) There are also stocks in these doors :-))) And a little bit of equipment - blenders, ham maker, meat grinder, graters, ...
Flour and all kinds of bread ingredients brought from Finland. We have to store it, because rye bread made with Finnish flour really tastes better. And there is often no desire to go to Finka. And Sino-Japanese goods take up all sorts of places - algae, mushrooms, vinegars, rice for sushi. You can't buy it in the nearest supermarket. And sometimes you suddenly want something like that ... Oils still require storage in the dark - pumpkin, nutty, nutty, avocado, rice, grape - what is for frying and what is for salads. Well, it's also nice to have potatoes and onions available :-) And also sweets and dog food.

In theory, if the very first door is freed from stocks, all the equipment can be placed there, but you cannot do without a "magic corner", probably.

And we did it like this ... It remains to finish the little things. Only now the glossy facades are somehow already scratched, although the film is German, dear ... Maybe there is some means to hide microscratches?

You can try this remedy here. Mellerud polishing paste for plastic and acrylic glass
🔗

or this 🔗

_🔗

It's kind of interesting, but the life of the plates will be significantly reduced (at least for me). This is me about the top photo.



A useful addition to kitchen furniture

And I would have something like this (shamelessly shamed with 🔗)
My mother is a woman, here people live! I look at these photos and I don't know whether to stand or fall. The most important thing is that everywhere they write "free delivery", although it is clear that most of such furniture is purchased by people who practically do not know the account of money, and they, most likely, do not care if the delivery is free.

My husband does not want to improve the kitchen like that. He says that there is a lot of fuss, but the won space is not enough ...

My husband does not want to improve the kitchen like that. He says that there is a lot of fuss, but the won space is not enough ...

I saw such boxes when I ordered a kitchen with a friend. So - it makes sense to make such boxes only with a cabinet width of at least 80cm. There the distance is greatly reduced - the legs of the pedestal, the guides for the box, the walls of the box ... In short, if the pedestal is less than 80cm, then the game is not worth the candle.

in the old kitchen, my parents had a drawer under the cabinet. very comfortably. on casters. and under a wide curbstone. and under the narrow one was - not so small - the drawers on top were not small - they were already pedestals only to the width of their walls. this one is the same, only from below and on casters. but, for some reason, in modern kitchens such a stray is a rarity ... and so convenient

My husband does not want to improve the kitchen like that. He says that there is a lot of fuss, but the won space is not enough ...

There is common sense in these words. Moreover, my personal experience shows the same. How many shelves you make, they will all be busy with something. And not necessary. Moreover, the necessary will certainly be there, that on the way to it, the unnecessary will have to be raked. So it was when we lived in Khrushchev with a 5.5 kitchen, and now, in a new apartment, it continues.

***************
N. Gogol is, in my opinion, considered a great writer because his conclusions from observations of life have remained valid for centuries. In particular, this one.
What a people! It is worth erecting a monument or just a fence, as they immediately throw all sorts of rubbish near it! (c) Auditor

Nothing personal
EC

It is installed under the curbstones 60 cm ... I forgot to write. Height 15 cm if I'm not mistaken

The box must be recessed so that your feet do not hit the handle.
If the base or supports are standard - 100 mm, then it is suitable for trays.

"Floating Island".Is your kitchen long and narrow? Then you need a "floating island" - a cabinet on wheels, on the surface of which a cutting board is installed, and all kinds of kitchen utensils are placed on the shelves below. When you're done cooking, simply slide the cabinet back into place.

I do not like pull-out elements on wheels, they must be pushed very carefully so as not to snag the sides. Wheels often go wherever they want.
Better on the guides - as if it will not go anywhere but a niche. Only what guides are needed to support the table

And I was more impressed by the dispenser for detergent or liquid soap. Very graceful. For me, both mortise dispensers, expensive, from different firms, alas, did not last long. But it was very convenient to use them.

I got here too. There are a lot of questions on the topic, but I'll start with this.

I have a drain. but I can't say that I really need him. But there is nowhere to fill the dirt there and now to clean it out ... I bought a special brush and play with it in full.

So I have such a drain in stainless steel. sink Franke. I was tortured to wash it. Show me your brush, otherwise I'm using the baby bottle brush, the wire base is thick anyway.

Like...

"Pimpochka" dispenser put Ikeevsky. My husband was busy ... about 20 minutes, and I planned to do it for about two years. I looked at the photo yesterday, told my husband, he bought it and made it today. A very handy thing.
Previously, bottles of detergent were placed on a shelf suspended from a rail. Now the problem is - what should I adapt this shelf to

Tiled table, beauty!
He was like this:

This became:

It turns out in Israel they also make tabletops from tiles:

Not in Vasyuki. Jerusalem has
Go to the blog page, there are many pictures of these ceramics. They write that she appeared in Israel in the 1920s, the Armenians brought this craft.

I remember how I went into one shop with ceramics, so they barely dragged me away from there.
The girls in the photo are very beautiful, but you just can't take your eyes off alive,
I bought myself a cup and a plate and a cup for my daughter.
It's good that I remembered about the camera.



🔗

[Ceramic tableware]

Girls - we have an interesting topic here, let's share our impressions of the dishes there

Ceramic tableware

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=16633.0

[Luysia]

I wanted to go there not all rubbish, but put everything down from the oven. And then, before you turn on the oven, you need to rake everything out and put it somewhere else, and then put it back.

From some topic I moved here, I haven't looked into furniture for a long time. Luysia keep 🔗 For a photo of a pull-out tabletop (Quote: Luysia on Nov 04, 2012, 10:03 pm) and a pull-out drawer near the floor (on the same page, at the very bottom). I just could not think of where to put the old countertop (I make one-piece for 3 cabinets) and was looking for a place for baking dishes!
Don't cry now I'll tell you what to do with the kitchen. Do you have a store like Leroy Merlin, Castorama or Baucenter in Ukraine? In general, we stomp into the store "everything for repair", looking for there: 1) the base of the box - a furniture board (this is a piece of 16mm chipboard with an edge glued around the edges) or a simple shelf; 2) self-tapping screws 4x16 mm; 3) full extension ball guides; 4) several euro screws, 5) drawer handle. If there is Xcm between the side walls of the cabinet being improved, then the bottom of the box should be (X-2.6) cm. How to assemble the entire structure I can write in the LAN, the only thing is that to screw on the guides, the cabinet will have to be turned upside down.
Thanks again for the idea! It's great that I didn't have time to connect all the cabinets with a monolith - I still have time to screw on such a convenient piece!

Or, here's the inbox solution from the previous forum pages: 🔗

I am now sitting in the country kitchen and looking at my wall. Just recently Osa asked me questions about this. This is how we came up with it - although it doesn't move anywhere, it is very convenient for giving
🔗 🔗

And I’ll ask again I’ll find the gratings here, and I’m curled up: there are white-painted, 2 mm twigs, cost (on average) 300r, there are galvanized 2mm, they are already 700r, but there are as in the photo, with thick rods 4 -5 mm, chrome-plated, but cost from 1300r The kitchen is white and green, the walls are white, the handles and rails (when I hang them) will be chrome-plated. If I don't hang the elephant, maybe I can take the cheapest lattice and calm down?

Wasp, white painted can rust.Do you know how quickly white dryers rust?
But if your humidity is not high and you will thoroughly wipe the hanging things, then it is normal.
Stainless steel is stainless steel, rubbed it - it shines again.

Wasp, white painted can rust. Do you know how quickly white dryers rust?
Stainless steel is stainless steel, rubbed it - it shines again.

So I am afraid that the paint will churn off and rust will go to the wall. On the other hand, the white lattice will not be so striking. There is a white "lift" dryer - 160cm pipes, which go on ropes to the ceiling. It is completely new, while defects are invisible. But there was a sad experience in the operation of lattice baskets for linen, it was not visible in the package that the corner rods were chipped, now rust appears on them - you have to scrub with kerosene and cover the damage with varnish.
Probably I'll fork out for 150 * 60cm (there were 1160 rubles each). I really need 140 * 75, but there are none (look here 🔗). And then (in probabilistic terms) I will buy all sorts of hooks and baskets 🔗

Yes, it depends on the quality of the metal and coating.
My clothes dryer (in the bathroom!) Is already five years old, and another one hangs in the street altogether and none of it has rusted.
But the dish dryer got rusty in one year.
If you have a stainless steel rail and handles hanging on your wall, you'd better buy a stainless steel for 1300. Imagine how long this grill will last you and how many products you buy for the same 1300 and how long will it last? I always make such a comparison for myself when I start to regret money for something durable

In principle, after the construction of the fence, I have a good piece of such a lattice. Three square meters. The mesh is welded, galvanized, cells 35 * 35 mm. Production zd them. Lepse, city of Solnechnogorsk, Mosk. region Maybe I shouldn't bother with the purchase for the country kitchen? Only, I'm afraid the precious one will begin to squeal ...

And I’ll ask again I’ll find the gratings here, and I’m curled up: there are white-painted, 2 mm twigs, cost (on average) 300r, there are galvanized 2mm, they are already 700r, but there are as in the photo, with thick rods 4 -5 mm, chrome-plated, but cost from 1300r The kitchen is white and green, the walls are white, the handles and rails (when I hang them) will be chrome-plated. If I don't hang the elephant, maybe I can take the cheapest lattice and calm down?

Met from this * opera *

Well, here's a photo report ...
This is the entrance ...
🔗
This niche is for an oven that we don't have yet.
🔗
This is a sink
🔗
🔗
Well, here, on the windowsill (or tabletop), Freesia's assistants are located)))
🔗
The kitchen, as you can see, is small, so you won't overclock too much. But, as best I could, I tried to provide comfort and coziness for my beloved))))

[MILLER]

MILLER
thank you so much for the kitchen!
Several questions immediately arose:
1) what is the countertop
2) how to use gypsum
3) on which fasteners were the boxes hung?

I answer))
1) table top - plaster, lined with ceramic tiles
2) used moisture resistant ..., covered with good washable paint. about 5 months, the flight is normal. Always, if something can be tinted.
3) in the places of fastening of facades and drawers during the installation of the frame, wooden boards were laid

The photo is somehow gloomy, maybe because I was shooting in the evening. And so, it turned out bright and bright ...

About the sofa. It is made from overhead hinged kitchen cabinets. The top is reinforced so that two adults can sit. How to sew pillows / mattress on such a sofa (bench): 🔗

people sewed according to this guide: