Kenwood kitchen machine: working with attachments

[Natalia]

Natalia, there is a plastic white wide rim. It can be seen in the photo. Instead of the bottom, one of two optional sieves is inserted.
Previously, models with plastic were only suitable for KM with a small, that is, yours, bowl. But now manufacturers are changing something there.

But I don't understand this nozzle in Mvideo from the photo, without a bowl or something https://Mcooker-enn.tomathouse.com/s-image/2854/products/nasadka-dlya-kuhonnogo-kombaina-kenwood-aw20010006-20033068

Yes.
This is KAV 992PL, only in profile.
For your sweetheart just right. And the price is ice. Take it without thinking.
As they said in our youth: "if you want to ruin a person, give him a camera."
Nowadays, the stakes are higher: "if you want to ruin a man, give him a Kenwood kitchen machine"

Previously, models with plastic were only suitable for KM with a small, that is, yours, bowl. But now manufacturers are changing something there.

Sure?
The diameter of all bowls is the same. Therefore, both before and now, plastic models had to fit everywhere.

[Pasha]

Pasha, well at least I didn't write the full name of the store (I mixed ours with ours)))) Got it, so I don't look at the metal
Olga, then everything is included. Fine! Probably, you need to drive to buy and not suffer any more. Is the price tag normal or maybe cheaper?
I also asked about flexi and souffleika ... can I have a short review? Do they know how to do something that standard ones cannot cope with?

Oh, I'm scribbling here ... and Pasha has already answered) I'll definitely take it, it would be available.

I understand, so I don't look at metal

Well, not why, you can watch. Not worth buying!

or maybe cheaper?

Well, only with hands on Avito. And even then it is not much cheaper. If not more expensive at all, considering the price of Kenwood BT.

[Paul I]

Paul I, I will not argue, since I did not use little Kesha. The diameter is the same, and the height of the rim on the large bowl may be suitable for both nozzles, and in the small bowl, the narrowing downward may prevent the correct installation of the aluminum rim. I don't know if I wrote it clearly.

[Paul I]

I also asked about flexi and souffleika ... can I have a short review? Do they know how to do something that standard ones cannot cope with?

Take it without thinking ... flexi.
The rest of the details were above with a detailed analysis.
Flexi is much more in demand than souffleika. The result of a souffleika is not always unambiguous and positive, at least in our experience. It is not for nothing that it is she who goes in the basic kit to inductions.
My opinion: flexi is very necessary, the souffleika is more pampering and you can do it. Although in the hands of an experienced person ...

Paul I, I will not argue, since I did not use little Kesha. The diameter is the same, and the height of the rim on the large bowl may be suitable for both nozzles, and in the small bowl, the narrowing downward may prevent the correct installation of the aluminum rim. I don't know if I wrote it clearly.

Well, more or less. I also suspect that they differ precisely in the geometry of the wiper body itself.
But from experience, from 4.6 to 6.7 it rises, on the contrary, I don't know.
Be that as it may, but the metal case would not take for the above reasons.



By the way, there is a good price.
🔗
I myself took it here.

[e]

Brothers, do not confuse people.
Notka, Natasha, look at the topic first, at least the first 10-15 pages, it's convenient there.
There are many more rubbing discussions on the topic. eg,
A plastic-rim wipe and a metal-rim wipe will normally fit both the large bowl and the small bowl. There is no problem with that.
Both wipes work well.Mine, with a metal rim, behaves decently, does not litter with shavings. However, if the shavings were removed, then they would be removed from the plastic much more, which is also not very tasty.
Those. it's not about the rim - they're both pretty good.
The point is the wiping nozzle.
The pin of this attachment has a different diameter. For machines with a large bowl, both diameters are suitable, for machines with a small bowl only meSmaller diameter.
Previously, a smaller diameter corresponded to a plastic rim, a larger one - a metal one.
It's hard for me to say what is happening now in connection with the leapfrog in the names, new models of machines and attachments.
Only for large cars any wipes are suitable, for smaller ones - only those with a thinner pin. Previously, these were wipers with a plastic rim.
I ask those who bought wipes for cars of new modifications with new attachments with new designations to respond - is there any such correspondence.

About the attachments. Here you have to look at your needs. For example, if you often make biscuits, then the souffle nozzle is very useful.
If you make oil creams, then flexi is needed, etc.
Personally, I did not take the souffle, I do not need it often, but many are constantly using and happy.
So according to your needs.
Therefore, before asking a question (and answering it!), You need to voice your needs.

About the citrus juicer. There are very few positive responses about her. Most recommend purchasing a separate one. This is a very inexpensive thing, really cheaper and more practical than a similar attachment to Kesha.

I would also like to return to the question of the rubber seal for the multi-shredder.
The seal from the blender is ideal for it.
Such a seal was in old model blenders, now blenders come without a ring.
So if you have to look for this gasket in the workshops, it is better to ask it exactly as a gasket to the blender, all the same, this technique is more often heard.

Personally, I didn't take the souffle, because I don't need it often, and many people constantly use it and are happy.

For me flexi (or hands) completely replaces the souffle, I bake biscuits regularly

[Olya]

Olya, Thank you. I read little by little .... since many concepts are new to me, I often do not fully understand what I have read and swim. But I will definitely learn everything

i am capable

I mostly bake biscuits, charlottes, muffins, cookies, casseroles. I like to whip cream with creamy curd.
That is, the rubbing in Mvideo may not work for me? They would at least give

Natasha, what is your cup? If it is large (6.7 liters), then any wipe will suit you. If it is small (4.6 l), then only with a thin pin, unless, of course, this landing unit has been changed in new models.
Only the diameter of the pin matters, everything else is irrelevant.
Let's wait, the owners of your car can respond.
For now, measure the diameter of the pin of your nozzles, and you can look in the technical specifications or from our members of the forum for the diameter of the one you are going to buy.

Irisha, Kara, I also intervene with a spatula - it's faster and more convenient for me than reinstalling the nozzle, washing it later ...
Yes, and I see and feel better how it intervened when manually.

I just took an AW 20010006 or old number AT992 in the m-video, I sat down perfectly on my Kenwood Chief Titanium KM-010, my capacity is 4.6 liters. Very happy

But I’m a rukopop, apparently ... my biscuits did not come out with either flexi, or with a K-attachment, or with my hands, but they do it with a souffle!



And yet, I have long wanted to ask Pavel, you, as I understand it, have feedback from Kenwood representatives. Have you asked why they don't supply plastic bowls for cash to our market?

That is, the rubbing in Mvideo may not work for me? They would at least give

Well, e-mine, I wrote to whom in plain text, without encryption and assumptions, what would be suitable?

Have you asked why they don't supply plastic bowls for cash to our market?

I’ll ask. Give a link or partner.

Maybe someone can tell me if such a nozzle is suitable for 020 Kenwood and is there any point in buying it?
🔗

Well, e-mine, I wrote to whom in plain text, without encryption and assumptions, what would be suitable?

And you, Pavel, do not be angry that your words were read in a wrong way, and you were not listened to. Themselves today asked about the metal bowl of the sieve, although a couple of pages ago it was already discussed

***

Hello everyone! I returned, and radically - changed the city.

On today's topic.
Soufleika is optional, but very convenient.
Although, reading the thread, I came to the conclusion that you can not make friends with her. Or it is not so often needed. And who made friends - he praises and loves.

Flexi, with the right hands and mode of use (speed, etc.), can replace a soufflake. But flexi soufflake, even with golden hands covered with diamonds, will not replace. Sufflake is a very narrow nozzle use. But its low price (relative to other attachments) brightens up this circumstance.

I prefer to beat a small amount of butter with the old form of flexi. And from 300gr. the result is equally good. But the old form is a rare bird, you can only buy it from our hands or on the German Amazon.

[Miranda]

Miranda, welcome back!
Well settled in a new place?
Where are you now?

Is the old flexi a rubberized K-shka?
Many people praise her. It turns out to be very versatile, I am also thinking about buying.

That is, the rubbing in Mvideo may not work for me?

Natasha, okay, I have one, but the plastic rim is spinning on the bowl. This is the same 992pl as on CU, just a different designation in m-video. The price is good, this is a promotional one, recently they were more expensive in m-video, I don't remember exactly, like about 5,000 rubles.

I just took an AW 20010006 or old number AT992 in the m-video, I sat down perfectly on my Kenwood Chief Titanium KM-010, my capacity is 4.6 liters. Very happy

Irin, is your white plastic insert not spinning? I have to hold her with my hands. Strange somehow ... It seems like a nozzle for small bowls ...

Damn, this rubbing at the price in m-video haunts me. I have a bowl of 6.7. It seems like it should fit?

Girls, in m-video you can return the goods within a month, so take it and try it)))

Brilliant !!! We must take!

[Olga VB]

Olga VB, Thank you
I returned home to Moscow.

Yes, the old flexi is a rubberized K-shape.
And it is, indeed, universal. And flexi and k-shaped at the same time.

More delicate than iron K-shaped, for example, when cooking cake. Because iron at high speeds, it seems to me, breaks food a little, but rubberized does not. That is, to knead the minced meat is definitely iron, and I completely switched to the old flexi cake.

But the new flexi with removable elastic bands is also very good.
I had only one complaint about her - a small amount of oil (50-100-150gr.).

But I still haven't decided yet, and I can hang up which nozzle to take to work. My dream is to do testing, doing the same thing 2-3 times with the new flexi, old and K-shaped. But until the hands have reached.

And whip the K-shaped squirrels, I have never tried the old flexi. I also want to try.

[Olga VB]

Olga VB, Olya, thanks. I will ask service centers for a gasket for the blender. MVideo did not call back, so Kenwood is still silent. Regarding the rubbing, I confirm 992 approaches the induction perfectly, I just made coconut milk, rubbing the pulp of the coconut.

🔗

Will not work.

And whip the K-shaped proteins,

What is this for. Did not know. The wife whips it with a whisk. What is the difference?

I haven’t wiped anything yet, but it will spin, because it easily enters the form - maybe this is how it should be. I have to ask Pavel

In principle, this is so. It can spin. It puzzled me too. Why does it spin on induction, but not on Sense. It turned out to be the force of pressing the blades. There, the distance is different to the working surface. It is necessary to initially adjust them as written in the instructions and then the clamping force will not allow the bowl to spin.

Will not work.

Why won't it work? Planting nests are the same.Planting depth is also the same in relation to the AT642 bit. The question is, of course, how long will this nozzle last on KMe

Why won't it work? Planting nests are the same. Planting depth is also the same in relation to the AT642 bit. The question is, of course, how long will this nozzle last on KMe

Formally, it is possible to shove it in (if the landing dimensions really coincide in all parameters). And it may even work for some time (the question is how?). But the manufacturer does not indicate the possibility of working with the KM line. And the reasons I see in the technological discrepancy. Judging by the picture, the attachments have a plastic pin and it is most likely designed for the torque of the meat grinder. KM has other load characteristics.
So, I would not experiment because of a couple of thousand rubles.

Formally, it is possible to shove it in (if the landing dimensions really coincide in all parameters). And it may even work for some time (the question is how?). But the manufacturer does not indicate the possibility of working with the KM line. And the reasons I see in the technological discrepancy. Judging by the picture, the attachments have a plastic pin and it is most likely designed for the torque of the meat grinder. KM has other load characteristics.
So, I would not experiment because of a couple of thousand rubles.

The fact that you can shove it in and use it, that's for sure! For comparison, the AT643 is made of metal, the nozzle itself and the input pin are made of metal, but the jumper between the entering slot in the machine and the grater itself is made of plastic, so from the point of view of the load they must withstand the same thing + at643 the diameter of the loading hole is much larger than awmgx. I agree that you shouldn't risk using this KM attachment.

On the site 🔗 I bought today two attachments - MGX400 and a vegetable cutter attachment. All 5 thousand. A very pleasant consultant. I explained everything, showed it. Then I still could not figure out what to press in order to insert the nozzle into cubes into the low-speed slot. I called, he explained everything to me again. Also a fan of Kenwood. And the price compared to other points is significantly lower. The truth and the range have already been chosen. But there is still something left.

My MGX300 attachment fits perfectly into the low-speed socket. I only skipped cheese on it, but I think other products will go well too.

The fact that you can shove it in and use it, that's for sure!

Well yes:

The MGX400 dicing attachment is suitable for use with MG400 / MG500 series meat grinders and Kenwood Chef / Major kitchen machines. The MGX400 Dice Cutter is suitable for dicing vegetables, cheese, meat and other foods. The nozzle cuts 10x10 mm cubes.

Only for the MGX300:

Designed for Kenwood Meat Grinder MG400, MG500 Series

A separate attachment is made for CM. And much more expensive. Apparently there is something.

My MGX300 attachment fits perfectly into the low-speed slot

This does not mean that it will work just as great. It is not for nothing that Kenwood released another similar nozzle separately for KM. Or do you think it is greed?

Considered too expensive a product

The sales result was just so-so. And it's not just the high cost. In the same chains, coffee machines of the same De Longy or Jura are sold for 200-250 thousand.

Designed for Kenwood Meat Grinder MG400, MG500 Series

I've also read the instructions on awmgx ... unfortunately I did not find information about specific models there. Maybe you have a newer instruction, I cannot confirm. The attachment is not very popular these days.

A separate attachment is made for CM. And much more expensive. Apparently there is something.

You are probably talking about the AT643, Kenwood previously had the Kenwood mg520 package, it included this particular nozzle (although there were only 3 drums in the kit)
The essence remains the same, I am for metal) It is still more reliable)

where did you order? And yet, does the aluminum rim fit snugly in the bowl?

Elena, I ordered in Moscow, filido online store. For 7-8 thousand, my hand somehow did not rise to buy a rub.
The aluminum rim does not fit very tightly into the bowl, but it does not spin with me. As for the rust, I also wash everything at once and wipe it off. Last fall I became the lucky owner of 3 sacks of apples. I dried part of it, and baked part in the oven and chopped it with a blender for the child. At first I rubbed it through a sieve, but it didn't take me for a long time, so I froze it. And with such a unit it is a pleasure to make mashed potatoes.

Which microscope did you determine? Generally speaking, a metal-metal friction pair, in principle, cannot work without chips. It is, the question is in the size of the particles.

Pavel, it seems to me everyone understands that we are talking about visible shavings and visible traces left by friction, and not about microns of the removed metal. Previously, they used aluminum saucepans and scraped them with metal spoons, no one died from such microchips. Naturally, the coating from the sieve will wear off over time, and all this gets into the puree. But I personally am not going to bother with this issue, we breathe more metals, especially in large cities.

Well, maybe someone needs a refrigerant. It can be easily damaged if dropped

The ad emphasized that the bowl with the refrigerant could be installed in the bowl from the combine, and the girl wanted to keep the plastic bowl from the ice cream maker.

If I had a place I would of course buy a separate freezer. On the same CU they are for 8-9 tr. And so I needed an extra bowl and ice cream maker, that's why I bought myself an attachment. But I understand that you need to handle very carefully.

[Pavel l]

Pavel l.Plastic bowl 26538
Look here
🔗

assumed it was a spare part, not an independent spare bowl

layer. the bowl is not a spare part, but an additional bowl. I also ordered such a bowl using Masha's link, before that I was lucky to get an adequate specialist from the SC, he explained everything. before we had no opportunity to buy additional bowls, they just were not delivered to us, and now there is just an abundance of everything, here 096 immediately with additional a bowl as a gift goes.

[Nyufab]

Nyufab, I'm interested too
Olya !!I bought a rubbing to 020 from 010 .... the seller twisted something to me right in the store and as a result, I have been using it perfectly for 10 years! Truth on induction have not tried yet

The day before yesterday I was just interested in the article of the plastic bowl for Kenwood Chef, no one responded. As a result, in two days I figured it out and ordered it. For some reason, they are not delivered to us, but there are bowls made of impact-resistant plastic, both for large models and for small ones. I have a car with a 4.6 liter bowl. These bowls go to her:

🔗

I chose a seller with the best rating and an adequate price for the bowl and delivery, I already sent it today. I started to bake bread with the help of Kesha, I really liked it (thanks to everyone for the advice and recommendations), but with a plastic bowl, the dough will be better and collect, and practically not linger on the bowl. A metal bowl has more adhesion, especially since I regularly knead minced meat on ham in it, there are micro-scratches from ice.
And thank you very much for the advice on choosing a sieve wipe. I didn't need it, but can you resist here? Moreover, at such a delicious price in M-video. I ordered it too. Pavel is right about the camera, i.e. Keshi.
For those in doubt, I put a photo in the bowl, measured my steel one to one.

[Paul I]

Compare whether the ice cream maker stands on it, as on an ice cream bowl, or does not rise, as on an ordinary bowl.

Paul I, I don't have an ice cream maker, I ran to my friend and compared it))) Inside. the bowl rises in my plastic mm 3 higher than in my own.
If you touch it, it sways - it doesn't sit tightly, the lid sits normally on top, you can't see anything, but it sits more tightly in your home, as it seemed.

Natashik, Of course, there are plastic bowls on sale in nature, because there is a series of Kenwood KM 357 they have a plastic bowl in the kit, and it fits many models, the bottom molding is the same)

NikoVazovskiWho can argue, of course there are) that is why I was looking for a plastic one - it is easier and more convenient for a spare one, but by 096 in Russia you can buy a spare only either metal or an ice maker with its plastic one. Only I didn't want to buy an ice cream maker because of a spare plastic bowl. I found it in Germany, then I saw Maria Masinen's review of this bowl, I bought it, I'm happy.

Now I tried to make mayonnaise in glasses ((recipe from page 106. It didn't work out, it says thick, it doesn't fall out of the glass, I have liquid ... Because I threw diluted citric acid instead of juice? How can I fix it, thicken it?

We didn't succeed either, they poured it out.
A few pages ago I gave a recipe for mayonnaise, which we consistently get.

[NataST]

NataST, strange, I got it right the first time using this recipe. Egg at room temperature, Dijon mustard, lemon juice. Very tasty and very thick.

I always get this recipe in milk without eggs

Homemade mayonnaise with milk without eggs (Lana)

[Paul I]

Paul I, found yours, thanks
yana0505, I generally try the third time, in principle, mayonnaise and never worked ...
Miranda, but can you do it in a glass with a decrease in the amount? Have you tried it? The submersible blender covered me ((

[NataST]

NataST, I always do less, exactly one time.
I even counted submersible.
It turns out great!

It's good that I read about the chopper, which is sold without an O-ring, did not have time to prepare the sauce, looked at me the same thing, maybe all of these are in the m. Video for the action or were we just "lucky"? in general, I bought three pieces of a set in the service, if anyone needs one I will share

I ran and I'll see the ring😲

Flax, there should be two of them, one along the edge, the second around the knife, so that's what I didn't have with the knife

My wife and I, too, at first did not get mayonnaise in the multi-chopper. They twirled it as according to that recipe - some kind of liquid and even small bubbles can be seen. I put it in the refrigerator for 5-10 minutes ...
I go into the refrigerator - and it generally stratified into two consistencies. I hoisted it back on the CM and started it for 5 minutes, or even more at a decent speed. And voila! Everything worked out fine. We ate with pleasure.
Apparently in a couple of minutes, as it is written in the recipe on page 106, he does not have time to whip normally ...

[Natali S]

Natali S, Thank you! I have a ring in place. I had to disassemble the part with the knife, since the elastic band is sandwiched between them, so it could not accidentally jump out. And along the edge, glued or something ..

I use the AT338 blender base with multi-chopper glasses. They are for one seat. Ken 020. And so, straight, hands itched to buy a second nozzle 320.

[LenaPena)]

LenaPena), fine for you - lucky in general, there is nothing terrible, of course, except that the car almost flooded (such a dirty trick was set up) and so - in the service you can order but - 2990 rubles.

Friends! Today, I put a wipe on the machine and tilted my head, it snapped shut, and at that moment I realized with horror that I hadn’t removed the thermal casing .. a chill ran inside .. but when examined, everything turned out to be ok. frame (just move) and lower the head, it closes without effort.)))
Oh, I forgot to write (sorry Olga, I remember about your request with messages) did not wipe anything, ran to work. I'll see how it works in the evening, I think it will spin less ... (I learned how to correct messages))