Kenwood kitchen machine: working with attachments

milk in your childhood was made from milk. There was sour cream in sour cream, kefir in kefir, and butter in butter. And milk sour in 1-2 days. Eh, memory of what you do to us

it's true

I googled "Mixer from the USSR cafe" and pictures appeared of exactly those units ... But with this, perhaps to me in a different theme of memories

[Twig]

TwigAt the moment, the Official Culinary School is located only in the MSC on the basis of Cookshef in the head office of DelonghiGroup on Suschevskaya Street, everything else is partner programs, which are also quite well equipped.

I want to get a cocktail like it was in childhood for 10 kopecks, but I just can't get it.

If we are talking about a milkshake from childhood, then it should be made not with the help of the usual blenders with knives, but with the help of mixers for milkshakes. Links, as a beginner, I have no right to insert, so just type in Yandex the phrase: "cocktail mixer" - there are a huge number of representatives on the Yandex market.
They will have exactly a milkshake as in childhood.

[MrVlad]

MrVlad, by the way, Kenwood also has such a mixer - they are called milkshakers, if I'm not mistaken)

Does anyone have experience of using a sieve attachment on an induction Kesha, not a KAV930, but the one in Mvideo for 2990 ... I dropped by the mileage, the manager showed me how it is installed on a 6L machine (I don't remember which one, some major ) so it got up and the blades pressed against it ... but it was Svobodnenko in the bowl, I don't know how the Kav930 sits ...

[LenaPena)]

LenaPena), in MVideo, the manager also demonstrated to me how KAV992 becomes in a 6L bowl. He only kept silent (although, most likely, he simply did not know) that the pin for the Majors is thin. I didn't buy. But if the pin does not bother, then KAV930 sits in the bowl in the same way. In a sense - just as free, only it is metallic and deeper.

I am using KAV992 in induction. I bought it on occasion and very cheap, because the seller did not know exactly the model (B.U.)
Works great. The pin is slightly thinner, but does not reflect at work.

I have a sadness (((I whipped butter and a piece of gum fell off from flexi, I didn't use it much.

I want to get a cocktail like it was in childhood for 10 kopecks, but I just can't get it. Maybe my previous blenders didn’t have enough power, I don’t know.

About the cocktail. It is better to take frozen milk, then you do not need to add any ice cream. We make cocktails very often. We put a bottle of ordinary milk 3.2 in the freezer in 2-3 hours, ice should appear in it. Sometimes we forget and almost completely lump, but it will also go. Pour milk with ice floes into a blender, there are two bananas and 4 tbsp. tablespoons of sugar. You can have a little vanilla. Whipped for 5 minutes with a bang, you can eat with a spoon. And yes, Ritochka, after all, a new blender from Kenwood is a thing. The old sample stood in my closet until I sold it to Avito, he did not whip anything, but only mixed it. And the new one is just super! I say this responsibly, I had 4 pieces of these blenders of different stand-alone ones.
And further. Who remembers in Soviet times how cocktails were made, do not you remember that my aunt took out milk frozen with ice from such a table with a sliding top! Until I remembered this moment, I was also looking for the perfect blender for a cocktail, and now I can even whip a fluffy cocktail in a 600-watt freestanding blender.
And further. For 13 thousand it is certainly not worth taking. Better to wait until the cheaper Avito pops up.

[Ljna]

I have a sadness (((

Ljna, this removable part of the KW714263 flexi nozzle needs to be replaced at the service center, if the machine is under warranty, then, in theory, they should be free of charge. Good luck!

I am using KAV992 in induction. I bought it on occasion and very cheap, because the seller did not know exactly the model (B.U.)
Works great. The pin is slightly thinner, but does not reflect at work.

Likewise. Yesterday I rubbed cottage cheese for Easter on induction, so as not to transfer from bowl to bowl (boiled Easter) and used a rub from Senses. The sieve sat a little loosely on a large induction bowl and fidgeted a little, but not critical, even if not held by hand. And the difference in the diameter of the pins was not noticeable at all. Although it would probably be critical at high speed: beats should appear.

I have a sadness (((I whipped butter and a piece of gum fell off from flexi, I didn't use it much.

See my auger story above. A similar problem happened. The claim must be sent to the address, then it will go to the address. Although it is better, of course, to draw up a letter not in the form of a claim, but in the form of a complaint.
And with the service it is possible they will refuse. It seems to me that some parts of the tips may not be covered by the warranty. Well worth a try though.

[Peter Push]

Peter Push, Paul I, thanks for the advice, I will try to contact ss and write a tearful letter to the specified address

I bought a sieve from the senses today, it fits perfectly into the cooking chef, a slight backlash. The pin is thinner, but firmly fixed.

[Paul I]

Paul I, of course mail) was wrong
anyone

[Paul I]

Paul I, for the letter, thanks a lot! I will definitely use the text, helped a lot

postponed the letter for tomorrow, and here is such a gift

and here is such a gift

Christ is Risen!

Please tell me about the compatibility of the attachments. I have a Kenwood Chef Titanium 7300S. There is a low-speed connector in the form of a hexagon, more precisely, the nozzles should be with a hexagon pin that is inserted into the low-speed connector.
Attachments with numbers starting with AT are not suitable for me directly - I connect them through an adapter. As far as I understand, attachments with numbers starting with KAX suit me. And then there are the tips starting with AX - will they work or not? Do they have a difference with those that KAX?
For example, on the Kenwoodrush website. ru it is written in the catalog that the KAX971ME nozzle for Chef Sense machines, kMix, and the AX971ME nozzle for kMix series kitchen machines. How could this be? After all, it follows from the first sentence that the Chef Sense and kMix machines have the same low speed socket ...

And then there are the tips starting with AX - will they work or not? Do they have a difference with those that KAX?

The difference is in the marking, the attachments are the same, so they answered me in the kenwood-bt chat

Having seen the message from Pavel about the "screw juicer" attachment, I want to share information and ask about the operation. I personally use Kenwood KMX80 Barcelona. I passed through it like garden apples / greni / golden / aidar, and I also squeeze out pomegranate seeds and oranges in it) I have not broken anything so far, pah-pah-pah, and the power is more than enough) I wonder who is like her is using?

I want to share information and ask about the operation. ... I passed through it like garden apples / greni / golden / aidar

Well, share. How did you cut the apples?

[Paul I]

Paul I, Apples were cut into quarters, a glass comes out completely from one normal juicy apple. Since I am not engaged in harvesting, and sometimes I want freshly squeezed juice, I sold my juicer (a very well-known promoted German brand, whose roots come from Russia) And I didn’t regret it, because the juice is obtained with pulp (a matter of taste, of course) and the juice itself does not oxidize as in centrifugal juicers.
PS, starting this topic, I wanted to know who has how this juicer works, if there were any breakdowns under loads)

PS, starting this topic, I wanted to know who has how this juicer works, if there were any breakdowns under loads)

Well, perhaps the one that I described.
When I looked at the collapsed auger, I thought that it would be enough to simply make major improvements to give the structure strength.For example, drill a small hole and fill the auger body with epoxy. Although, of course, it is best to cast the auger from silumin or turn it out of stainless steel.

I bought today 992 induction sieves, but the lid does not close. I'm afraid to press, someone wrote that he pressed the blades. How much should they be tightened? How should they be tightly packed in Sith?

[yana0505]

yana0505, There is a counter nut on the pin of the nozzle (blade), adjust the height you need) Depending on the amount of product and the consistency, you can change the downforce)

[NikoVazovski]

NikoVazovski, thanks, I'll try now. Did not help. I have adjusted the height all the way. Apparently you have to tighten the blades. Ideally, how should they be? Reach the sieve (shuffle it) or should there be a gap between the sieve and the blade? I just never used anything like it.

[yana0505]

yana0505, what model do you have? Are the blades not allowed there?
for example, in induction, you must also remove the protective casing, which is put on the "head".
And if only the blades, and not the casing, then you do not need to bend them. Just close gently until you click, they will fold in place by themselves.
They should rub tightly ("shuffle" your way) over the sieve.
Good luck!

[Olga VB]

Olga VB, I have induction, but I bought not 930, but 992 (many wrote that this model is suitable). I inserted it, but the roof does not close, I pressed it a little, there is still no click, it did not close, the blades rested against the sieve. I didn't press hard, I just didn't think that the blades should shuffle against the sieve.



Olga VBOlya, thank you very much, took off the protective casing from her head and everything is ok, the lid closed without any problems.

I didn’t think that the blades should shuffle about the sieve.

Must-must!
Have you removed the protective cover from your head?
It is not necessary to twist the pin very high, I, on the contrary, lowered it as much as possible so that the blades at the most acute angle adhered to the grid, as if pressing the product into it.
When we wipe something by hand through a sieve, we try to hold the spatula almost flat to the sieve, rubbing, pressing the product, and simply move it back and forth with just perpendicular movements.

So, the pin is in the lowest position, remove the protective cover from the head and first, so as not to be scared, pull the sieve plate out of the ring, and so close it.
Is everything okay? Does the case interfere? Then insert the wiper plate and calmly lower your head until it clicks. Everything should work out.

[Olga VB]

Olga VB, Everything worked out! Thank you.

everything worked out

In MVideo, a 930 sieve appeared for 2990 rubles.

In MVideo, a 930 sieve appeared for 2990 rubles.

In what city? We do not have.

In Moscow and the region, you can place an order

[vis]

vis, In Novosibirsk

[yana0505]

yana0505,
Is the store in stock? I'm from Novosibirsk.
I ran to the site to look, but 930 is temporarily out of stock (AW20010007). There is only AW20010006 - KAB 992 PL.

[Svetka-Vetka]

Svetka-Vetka, yesterday on the site were I smoked 992 for 1500 the day before yesterday on Avito, I went well to my induction. And yesterday I look at the site 930 appeared. The man had 992 more. He got a car as a gift for a promotion, now he is selling.

Yes, yesterday were, today is gone ...

[yana0505]

yana0505,
Ehhhh, and I have a big sense, I need 930.

[Svetka-Vetka]

Svetka-Vetka, I have a cooking chef, I bought a nozzle from Mvideo, they have it by number aw20010006. Fits great !!! I've rubbed apples into marshmallows more than once! They have a thinner pin, but they have no effect on fixation and operation at all.

[Svetka-Vetka]

Svetka-Vetkaand what's big session bigger than cooking 096? On my 096, the 992 nozzle fits perfectly.

I am already completely confused with these attachments, that is, their numbers. I signed up on the kenwood-bt website for a wiper. I have 096. All the others available to my car do not fit. Now I came to our forum, I look, people buy rubbers with different numbers and write that they are coming to 096. Explain to me, an old woman, what number of rubbing nozzles to 096 Kenwood to look for, since there is no answer from the site.
Forgive me for being stupid. I'm already completely confused.
In the M-video, this nozzle is AW20010006 for 2990. But does it fit for 096?

what big session is bigger than cooking 096? On my 096, the 992 nozzle fits perfectly

The volume of the bowl is the same. But the form factor is different. The top diameter of the bowl is the same - 225 mm.

My head is already spinning with these attachments. I have a KMM020, Major Titanium with a 6.7 L bowl.I've been trying to buy a sifting sieve for a year now and I'm also thinking of taking an ice cream maker. Did I understand correctly that the AT marking has been replaced by KAB? It's just that one site has an AT957A and KAV957 ice cream maker .... the price is the same, but what's the difference? Old stocks? And with the 930 sieve in general trouble, or not, or the price, as for an airplane wing. 992 in M-video for such a sweet price is now there.

Questions with nozzles and spare parts constantly arise - what fits what directly, what through the adapter, what is approximately.
I offer a separate branch with a list of Kenwood KM and attachments to them, and, conversely, with a list of attachments and what they are suitable for.
In principle, all this should be at the office. website Kenwood, but since questions arise constantly, you need to rake.
I myself do not have time to do this, but if someone is ready to make such lists, then I will post them in the branch, and we will replenish them as needed.

[Kukulechka]

Kukulechka, Yutan,

I am using KAV992 in induction. I bought it on occasion and very cheap, because the seller did not know exactly the model (B.U.)
Works great. The pin is slightly thinner, but does not reflect at work.

Likewise. Yesterday I rubbed cottage cheese for Easter on induction, so as not to transfer from bowl to bowl (boiled Easter) and used a rub from Senses. The sieve sat a little loosely on a large induction bowl and fidgeted a little, but not critical, even if not held by hand. And the difference in the diameter of the pins was not noticeable at all. Although it would probably be critical at high speed: beats should appear.

, I have a cooking chef, I bought a nozzle from Mvideo, they have it by number aw20010006. Fits great !!! I've rubbed apples into marshmallows more than once! They have a thinner pin, but they have no effect on fixation and operation at all.

And there are many more reports that the 992 attachment can be used instead of the 930

[yana0505]

yana0505,
no, no more. I just decided that we have different pins.



Paul I,
What do you think, if the sieve sits on the cookie, will it sit on my sense?
All in thoughts ... and the amount seems to be not large, but they did not deprive

What do you think, if the sieve sits on the cookie, will it sit on my sense?

And what sieve, what pin?

[Paul I]

Paul I,
Sieve -KAB 992 PL.
Oh, I looked at the picture on the internet, it is placed where the corollas are.
Once again I ran to kenwood-bt. From the description, the difference is in their mass. 930 -09 kg, 992 -07 kg.
They look the same ... I'll break my brain soon

[Svetka-Vetka]

Svetka-Vetka, so they differ in the material of the bowl - in 992 it is plastic, and in 930 it is aluminum.

[Belka13]

Belka13, there is a 930 with the letters PL and it's kind of plastic.
They confused us!