Kitchen machine Kenwood (2)

[Tanya]

Tanya, I probably have hands of a special curvature, so the syrup flows both to the walls and to the lid, and without the lid, past the bowl at any speed) so personally I will have to continue to do nonsense, it's easier and faster for me.

Thank you, I will try)) Today I made an Italian meringue for pasta, so half the syrup on the bowl

And I don't have any problems with this, a saucepan for syrup with a spout, it pours in a very thin stream between the whisk and the wall ... I never even steamed on this topic, I just did everything

Angelina, you have very correct hands, otherwise they would not have mastered such a cream as custard protein !! Try to pour in a thin stream, as Ksyusha wrote above, between the wall and the whisk and, most importantly (!), In portions, that is, pour in a little syrup and you see how the protein begins to brew, that is, it rises in a large piece and almost climbs out from the bowl, stop, do not pour, let the mass unite and sit down, then another portion of the syrup, whipping with shrinkage, etc. until the end of the syrup. Then incl. Maxim. speed, pour in lemon kitty, and so on ...

[Girls]

Girls, is there a blender in the kit in 020 Cache or not?

[Svetlan]

Svetlan, goes.

[Rita]

Rita, Thank you! And then on the manufacturer's website only 4 nozzles are declared in the package. Kryum, K-shka, whisk and flexi

[Svetlan]

Not,Svetlan, there is still a blender. I still have it in a tall box unopened, so I mean that this is it.

Girls, they also have different equipment. Previously, both 020 and 023 were designated, and some other number was. 020, probably was naked, only with corollas, and with the following digits already with additional attachments.

[Ksyusha]

Yeah,Ksyusha, thanks. Boom to know.
I went to watch it. I still keep the box. They write that KMM 020. I looked into the tall box, and then suddenly I have gold there, and I'm still in the dark.
No, not gold.
A blender was exactly half of the box, and small cardboard was stuffed into the remaining void.

I have a glass blender, I can't get it either.

[Rita]

Rita, tada already do not understand anything. : girl_pardon: Then you need to look at the office by numbers of the complete set.

[Ksenia]

Ksenia, so on the off-site I did not find a blender

[Svetlan]

Svetlan, here he is.
🔗

[Rita]

Rita, aha, thanks!

Girls, take to the sandbox. I ordered KMM020 yesterday. They'll bring it tomorrow.
After I burned a hand mixer whipping cheesy sour cream. It just caught fire in my hand. The sour cream never whipped. I was crying. And my husband ordered Ken to be ordered.
I've been reading you for a long time, I'm completely confused in the numbers. I generally keep quiet about the attachments.
I came to you from the topic about Boman.
Advise, guide, rate my choice

[dana77]

dana77, Congratulations! Right choice! Take your time with the attachments - make friends with your machine, over time you will understand what attachments you need.

[Natalia]

Natalia, Congratulations!!
020 without attachments, like)

Natalya, I also bought 020, now they are being sold at a good price. I am very satisfied, the quality can be seen a mile away, the attachments inspire respect, I generally keep quiet about the power. I have a Bosch MSM 6 series with a cube cutter, a Brown meat grinder, so I don't need attachments, BUT! I still ordered a set of nozzles for pasta until the price went up. I often make noodles, ravioli, and pasta.

They also ordered KMM020 for my dr, because the manual mixer broke, though others a month later, but ordered now, I also didn't know which one to choose at an affordable price. True, the store says that 3 nozzles + a blender, and Ken's website says about 4 nozzles ...

Svetlana, different sites have different information, but I have a soft attachment, it seems to be separately put into the box, since it even comes in separate boxes (it consists of two parts), with instructions and with a number that is for all separately ordered accessories. And on the main box, where the completeness is listed, there is a sticker with the image of this attachment. I have so.

[Svetlana]

Svetlana, Maria, Mayan, Svetlana, , Thank you. I think the right choice.
The attachments are expensive now and it seems that everything is in separate devices. So for now, for its intended purpose, and then time will tell

Natalia, the choice is correct. Now the sixtieth came to replace the twentieth Ken, which is already twice as expensive. What are marketers thinking?

[Mayan]

Mayan, I noticed him for 28400, while I was thinking - Euro jumped and he jumped for 34990, again it's a pity, but yesterday I ordered it all in tears and hysteria for 31900. Satisfied

and I found it for 30300))

[Mayan]

Mayan, I noticed him for 28400, while I was thinking - Euro jumped and he jumped for 34990, again it's a pity, but yesterday I ordered it all in tears and hysteria for 31900. Satisfied

I hope the hysteria was not because of the price. Something the price of 28400 seems suspicious, and 31900 is excellent, a couple of thousand won't do the same. When Ken is brought in, there will be only tears of joy. The store also made a free delivery to me. And I got a K-shaped nozzle with rust, so they immediately sent a new one at their own expense by express mail.

[Mayan]

Mayan, nope, not because of the price. And due to the fact that she could not beat the sour cream. And all one to one, the mixer burned out, the sour cream did not whip - but Kena ordered, my husband was very sorry for me))))

And I got a K-shaped nozzle with rust

As with rust, all the attachments of the combine are made of stainless steel, maybe some kind of fake ..

As with rust, all the attachments of the combine are made of stainless steel, maybe some kind of fake ..

I don’t think it’s fake. Below, between the end of one stick from the letter K and the rim of the nozzle, in the corner, there is, as it were, an influx of metal, like a trace from rolling, rust comes out of there. I was also surprised, I don't know how it could have happened. But even stainless steel knives are covered with rust spots. I would have inserted a photo, but I don't know how.

In general, my husband got Kesha, says 4 nozzles and a blender, like all the rules, now I'm waiting for him from work

[Svetlana]

Svetlana, Congratulations!
They will bring it to me tomorrow, so we will start learning practically together.
I'm already thinking where to start

[dana77]

dana77, Maryka, with acquisitions you
I'm kind. the salary has already arrived, tomorrow or the day after tomorrow it will come from the savings account (the account is stupid there, so that you don't have to lose anything, you have to wait 2 weeks), and I'll buy my Kenka)

[Natalia, Svetlana!]

I'm already thinking where to start

if it was about cartoons, I would certainly advise pilaf, but so ... Pies, probably, you need to invent some, or a cake for joy!
Natalia, Svetlana!
Heartiest congratulations! Let Kendel serve for a long time and do not know wear and tear! And he will not know wear and tear, because it is not for nothing that they give a guarantee of 5 years.

Let Kendel serve for a long time and do not know wear and tear! And he will not know wear and tear, because it is not for nothing that they give a guarantee of 5 years.

Oh, the new name is Kendel. He used to knead minced meat on cutlets on Sunday, he was Kennadiy.
And I also received a guarantee.

[Mayan]

Mayan, you can read more about minced meat. How much minced meat, what and how long to stir?

new name - Kendel

oh, they are my namesake with a parrot, so I get out of names as best I can: solid Kenki and Kendely.
I've also tried to knead the minced meat, but somehow I was not impressed at all. More precisely, I did not understand the final result. Maybe due to the fact that it was stirred for a long time, but it became fibrous or something. Spooning quickly bam-bam, and then right, you see, overdone.

Oh, the new name is Kendel. He used to knead minced meat on cutlets on Sunday, he was Kennadiy.

And at first I had a Canary, and then I decided that my birdie was an obvious lady. Now it's Canary.

[Mayan]

Mayan, you can read more about minced meat.How much minced meat, what and how long to stir?

Here is the prescription: https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=306884.0
I stirred it with a K-shaped nozzle for about 10 minutes, I don't know how much minced meat should be kneaded according to science, maybe someone will tell me. I'll tell you, these were the most delicious cutlets I have ever cooked, but I think this is the merit of the recipe. It's just that I usually mince it with my hands once, once, as Rita says, but after kneading ... two big differences.

Somewhere I read about minced meat, which must be kneaded to "threads". But whether always, or only for sausages, I always knead for a long time with a K-shaped attachment. The cutlets are more tender and homogeneous than after hand.

All! We are together! There is no limit to happiness! He's so cool !!!
(although the store has reduced the price to 30300r, bastards).
But still I'm happy. He never whipped me sour cream, so my hands are normal, but sour cream is based on vegetable fats. And it's a well-known company. Farm type.
But it doesn't matter. Poured gelatin there, mixed with a soft nozzle, the panacotta will

Natakha, congratulations! Serious choice!
Girls, remember, real farm sour cream is sour cream at the market of the villagers. There cannot be such sour cream in GOST stores. And according to industrial technologies, this is, simply speaking, thickened kefir of high fat content. Now it is more profitable for farmers to make sour cream on palm fat

Yesterday my husband brought me a handsome man, washed half the night I think today is my favorite biscuit to bake, classic, without baking powder, does Kesha really beat a whole egg well? Don't you need to separate the whites with the yolks?

[Svetlan]

Svetlan, once again, I sincerely congratulate !!! Well, since they washed it for so long, it will definitely only delight and please.
About the egg ... Try it. If something does not suit you, then you can twist the whisk with the wrench that is attached.

Does Kesha really beat a whole egg well? Don't you need to separate the whites with the yolks?

no matter how well which mixer beat the eggs, but I would still divide the whites and yolks, that's why it is a classic biscuit)

and I wrote a price offer to my own in the store. They gave me a discount, as much as 10 eur, probably the most dear ones from themselves
last night I asked if they can still make delivery for this free of charge, otherwise it turns out that it will work out. In general, I'm waiting for an answer and ordering my Inocenti)

Don't you need to separate the whites with the yolks?

there is no need to separate anything, Kesha beats whole eggs with a bang, very quickly and efficiently.

Avito girls sell Kenwood AT640 food processor / processor for 3500
🔗

my son already says, mom, if you buy a harvester, will we finally make noodles? he is already ready to make homemade noodles)

[Oksana]

Oksana, Well!! Fine! Is there a noodle machine?

Is there a noodle machine?

no, and for the next couple of months there will be no more, which I tell my son about, but he immediately forgets on the next. day the same question