Multicooker Yummy YMC-500

This is the number ... While I have decided on the choice of the Yummy YMC-500 Multicooker, it is no longer on sale! Or am I looking in the wrong place? Maybe someone pokes a link where you can buy it in Kiev? I will be very grateful.

Or tell me a cartoon similar in programs and quality, maybe something from their DEXa?

Just a month ago, only cherry was available, but not for long (friends managed to buy it). Pay attention to Dex 60

Something from November, no messages. I have such a question, I put a liter of milk "stewing" for an hour, after half an hour (apparently when the milk boils) it switches to heating. I try to put further on "extinguishing", immediately resets to heating. Marriage?

Something since November, not a single message. I have such a question, I put a liter of milk "stewing" for an hour, after half an hour (apparently when the milk boils) it switches to heating. I try to put further on "extinguishing", immediately resets to heating. Marriage?

I have a liter of milk on "Stew" boiling for 15-20 minutes. Then the milk boiled slowly for the time I set. In this mode, I experimented with baked milk - sometimes I boiled it for up to 6 hours, so it shouldn't turn off.
And so that after half an hour the milk turns off is my dream.
So I think it's a marriage.
In addition, I have never reset a single mode.
And dropped to heating - so it ended. But this should not be the case for extinguishing.
Does this happen only with milk, or with water and other contents too?

[Ditusya]

Something since November, not a single message. I have such a question, I put a liter of milk "stewing" for an hour, after half an hour (apparently when the milk boils) it switches to heating. I try to put further on "extinguishing", immediately resets to heating. Marriage?

Ditusya!
What kind of yummy do you have? I shouldn't have this.

I have a round one, and I'm more than sure that this is a marriage = (Mom gave it to me, she was idle, now I started to figure it out and such a problem = (It seems that there is still 2 months until the end of the guarantee, but I can't find a receipt. anyway, I really want it to be fixed for me.

I put a liter of milk overnight. 30 minutes on stewing (it turned off itself as it boiled, and then about 8 hours on heating, baked milk did not come out, milk is like milk ... = (

Now I'm going to try the rhubarb pie, the baking mode seems to work well.

I have a round one, and I'm more than sure that this is a marriage = (Mom gave it to me, she was idle, now I started to figure it out and such a problem = (It seems that there is still 2 months until the end of the guarantee, but I can't find a receipt.

a warranty card with the date of sale is important for the service. And the check? I don’t remember, do they demand?

a warranty card with the date of sale is important for the service. And the check? I don’t remember, do they demand?

Do not require a receipt, most importantly, a guarantee with the date of sale

the check is a guarantee for the domestic brand for supers like Metro. That's for sure. There I bought my first rice cooker, and recently also a fan, I got a tsu to say.

Girls you very much reassured me that the check is not needed, as there is a guarantee with the seller's seal and serial number. I read 31 pages of the topic yesterday. We still need to test it so that there is something to talk about in the repair.

Shoto your temka is completely "decayed"
And in Yumka new models appeared
Really no one uses them, they are quite worthy multi, as for me, even with cups for yogurt, since DEKH-50 has been discontinued, and for many (for me in particular) they started after the end of the two-year warranty period " crumble, "I think. that 501 Yumka is an excellent replacement for the workaholic DEHIK. In any case, the proven Yummi is better than one-day firms that will look at cartoons, and then not service, nor demand.
In general, it's sad, it's so quiet and sad with you

I also reread the topic just yesterday and was surprised that the discussion had subsided. Indeed, interesting models have appeared, maybe just Temka will come to life

In general, it's sad, it's so quiet and sad with you

that everything is OK with us, it would be bad, we would have flooded the forum here. And so everything is regular. I have been working every day for 4 years and at least that ... sometimes I think so-well? , my dear, when is it already tavos? for a dog? and she puffing on me - but figle - you can't wait

The stainless steel pot came up from Polina Superkow like a glove. (only I have a J-not a round yumka, so that people do not confuse)

The stainless steel pot came up from Polina Superkow like a glove. (only I have a J-not a round yumka, so that people do not confuse)

Just in case: my stainless steel pan from Polina Superkow burned nafig the same Yummy as the IRR

Just in case: my stainless steel pan from Polina Superkow burned nafig the same Yummy as the IRR

lottery however

and did not fix it?

lottery however

and did not fix it?

I did not take her to the service - there was no need, I immediately got Orion. And to him almost a native stainless steel saucepan is somehow dumb to buy ... But you have to
Yummi by the way is in many ways better than Orionchik.

And to him almost a native stainless steel saucepan is somehow dumb to buy ... But you have to
Yummi by the way is in many ways better than Orionchik.

and in the same place almost everyone has already acquired, not three and you already have a phobia, right?

What's better than yummy? I saw cool pastries in Orions, much better than I have in YUMMI.

The kindest to all!
Kohl here and about Orions remembered could not resist - registered.

They asked me to find a good-quality multicooker, useful for the household and to buy it. I go here, you know, on the Internet all sorts of different - I choose.

For more than a year now, Orion has been functioning properly with my mother-in-law, and my wife and I decided to get the same device for ourselves. And here I came across Temko on Yammy / Yumyamm. And he became interested. It seems to be a little more expensive, but the bowl there is already ceramic, and there is a little more power and even the now fashionable word 3D is present.

Who, what do the beautiful girls think about their monsters? What is better to take? Orion proven or Yummyu your newfangled? How tenacious is a ceramic pot from a Teflon pot? And how does the trendy 3d heating entot manifest itself? What other treats are there in the new Yammy?

And also by the size, enlighten how much in width, height, depth of YMC-501 and YMC-505
I liked the 505 very much, but I'm afraid that it won't fit in the planned place.

The kindest to all!

and you and welcome to the forum

We have a selection topic in a separate branch

HERE... Could you duplicate your post there, and we will wait for you there. By the way, there is a lot of interesting things and almost always the choice begins with these questions. Only, write in your profile where you live, there are different models in the UKR and Russia, so it will be easier to orientate.

Thank you!
Repost, yes. it's just that since the owners of the models interested in are gathered here, I decided to find out from the first hands ..
yes, and corrected the profile, yes.

and in the same place almost everyone has already acquired, not three and you already have a phobia, right?

What's better than yummy? I saw cool pastries in Orions, much better than I have in YUMMI.

at the expense of a phobia exactly noticed

I like Yummi 500J more because:
1) boils milk better than Orion on stewing (neither milk nor porridge escapes)
2) modes are configured more flexibly: baking from 5 minutes with 5 minutes interval, stewing from an hour with an interval of half an hour, etc.
In Orion, the shortest mode is warming up, 20 minutes.
3) with a saucepan: in Yummi she was killed in a year and a half, in Orion it began to wear off after a couple of months. And in general, bad.

Pros of Orion:
many modes, including yogurt. In frying, everything really fries, although it burns
The timer is less confusing. Although, if every time you calculate how to make sure that by a certain time the Extinguishing mode works for only an hour (or even 30 minutes) out of the prescribed two, then it may be more difficult ...

In general, this is so, right off the bat .... if you sit, think, you can normally compare them.

But about the new multi 501 and 505 responses here, in my opinion, there are no, they are that recently appeared on the market I also liked the 501 more, the less bells and whistles, the better and more reliable

The girls look after the multicooker, the soul fell on the Yummy YMC-501WR model, can anyone have it? How are they generally worth buying?
So many features for the price ...
Microprocessor cooking control
3D heating (top, side, bottom)
Power 1000W
Cooking time adjustment
Adjusting the cooking temperature
12 automatic cooking programs (pilaf, soup, baking, stewing, potatoes, yogurt, jam, steam dishes)
Cooking container 5 l, thickness 2mm
Steamer with a diameter of 23cm
End of programs timer 24 hours
Keeping food in heating mode 24 hours
Ceramic bowl
LCD display

[Oksana]

Oksana, I accidentally went to the topic The first days with a multicooker and out of the corner of my eye I saw there one of the last messages from a girl who bought Yummi with a ceramic bowl, but she didn't seem to voice the model, go there and ask. And here's another instruction for both Yumki

Found another Yummy YMC-505BX, so there are 21 programs in it ... it's a pity they don't write a list of these programs



I liked the yoghurt cups in these models

[Sandy]

Sandy
two posts above, I gave you a link to the instructions for these two multicooker, the programs are completely painted there, up to the temperature regime

Here, too, I lick my lips on Yummy 505, and 21 programs, these are some programs separately (Fish, Meat). Such a marketing move as I understand it. And there are 12 real programs there. Sterilization, I think, is an unnecessary function. Milk porridge would be better present.
Regarding Orion, as for me, it is the most convenient cartoon in terms of functions, only the native bowl disappoints, but you can stock up at Polinka's. And since the native bowl is "what kind" over time, baking cannot do without tambourines. I bake in Dex.

In Yumka-Yamka, I was interested in a ceramic bowl.

Yesterday I bought a Yummy 505 BX multicooker! Should come to me on January 11 in connection with the holidays.
I am very worried, since there are very few reviews about her ... I chose between her and 501 WS. Subtracted that in the 501 model there is no countdown when cooking a dish, and there is also no signal at the end of work. Maybe it's a marriage, or maybe a feature of the model. But it made me think and therefore decided to take the 505 model. I was choosing between DEx 60 and this one. I hope I was right!
And I still can't find recipes on Yami, I haven't looked through the whole Temka. Can someone tell me? I would be very, very grateful!

Yesterday I bought a Yummy 505 BX multicooker! Should come to me on January 11 in connection with the holidays.
I am very worried, since there are very few reviews about her ... I chose between her and 501 WS. Subtracted that in the 501 model there is no countdown when cooking a dish, and there is also no signal at the end of work. Maybe it's a marriage, or maybe a feature of the model. But it made me think and therefore decided to take the 505 model. I was choosing between DEx 60 and this one. I hope I was right!
And I still can't find recipes on Yami, I haven't flipped through the whole Temka. Can someone tell me? I would be very, very grateful!

Congratulations on your purchase! I'm only dreaming so far
So the recipes are in the instructions ... you take pictures of everything you do and show us, share your impressions

Oh girls, I read the reviews and canceled my order. Thanks to this forum. I will take Dex 60)

What confused you in the reviews? Although the Dex 60 is worthy of a cartoon, I admit it. Just wondering, like Yumi-Yami is not bad according to reviews.

It was embarrassing that the modes did not correspond to those written. I don't really want to spend time adjusting to it. I want to pawn food, turn on the desired mode and not worry about what I can do there. It was also embarrassing that I cannot find this company anywhere on the Internet and there is no official page. The general impression of what I read was not very good ...

AAAAAAAA. Well, this is your right and your choice.
Is this not an official page? They write - Japan manufacturer. Here is the instruction.
Somehow, Yummi has not yet aroused my mistrust.Why did she turn her attention to her.
I in no way dissuade, it's just that IRR has been using it for so many years and is very satisfied. Dex won't upset you either. Let the purchase be a joy, and use a pleasure.

It was embarrassing that the modes did not correspond to the written ones.

And you can ask where you got this information from?

Well, for example, the soup is not cooked on the soup mode, but on stewing, fried in baked goods, I don't remember the rest ...

So, after all, such a remark applies not only to Yummy Experiencedly, multicooker users have come to optimal changes in the cooking process, and many modes are not used entirely "for their intended purpose" even in more famous cartoons (for example, in Panasonic they adapt a minimum of these modes to prepare an infinite number of recipes)

Well, for example, the soup is not cooked on the soup mode, but on stewing, fried in baked goods, I don't remember the rest ...

it’s in the 500-old-they do it, because there is no frying, but there is only baked goods, as in Panasonic. Are there many modes in the new ones? where are the 21 modes?

Yes, there are a lot of modes, but the essence, as I understand it, does not change ... On other forums I found several reviews that the lid does not close very easily, I have to try several times ... also about it on the multicooker site, they also write that the soup is boiling on the soup mode ... in general, I somehow got the impression inside that there are many shortcomings for me personally, which is not observed in Dex ...
But all this is only from words, but in practice, I hope I can be convinced soon!

And if you were choosing between Yummy and Dex, what would you choose?

And if you were choosing between Yummy and Dex, what would you choose?

I have both that and others.Deks, it is true, redirected, but yuzala - good mv - I used it well when I was frying the whites

and I have a stainless steel xatryulya suitable for Yummi - practically unkillable, I pick everything with iron. And when you choose, remember that the dex has 4 liters, against the YUMMIN 5.

Here the temperature regime was thrown to me with a similar mv, only under a different name, quite normal.

program default temperature default time
1 Rice / pilaf 105 degrees 45 min
2 Cooking 110 40
3 Yogurt 40 8 hours
4 Express 140 35 min.
5 Simmering 105 2h 30 min.
6 Soup 110 1 hour
7 Warm up 80 30 min.
8 Pairs 100 40 min.
9 Baking / bread 140 40 min.
10 Frying 145 30 min.
11 Bake 150 50 min
12 Braising 125 2 hours
13 Porridge 110 1 hour
14 Pasta 120 25 min.
15 Pizza 150 50 min.
16 Fish 115 30 min.
17 Meat 130 45 min
18 Meat on the bone 135 50 min
19 Bird 130 55 min.
20 vegetables 105 20 min.
21 Sterilization 155 15 min.

But I'm not trying to persuade you at all on yummy, otherwise I won't collect bones later. This is a purely objective review, as it were.

and by the way, the temperatures in the frying are quite capital. Why not fry. But we have no one, you never know what is written. And the dex is proven. It's up to you, again.

Well, for example, the soup is not cooked on the soup mode, but on stewing, fried in baked goods, I don't remember the rest ...

So the DEX 60 also has to cook the soup on stewing, it does not have such a function. And Yummi has just such a function; in extreme cases, you can reduce the temperature.

It also seems to me that Yummi is not Shivaki and other one-day companies, and it is unlikely that in a short time she could deteriorate so much that she put it into new multi-line programs. In any case, the instructions describe everything quite clearly. It is, in fact, a rarity to give a full printout of temperature conditions on each program.
I just agree with the opinion that in the cartoon 505, 21 programs, due to the marketing move, it's the same as in the 50th Dex, to divide the Frying program into three separate ones: Frying MEAT, FISH and VEGETABLES. and there will be a bunch of programs with the same functions, only with different temperature conditions

I have both that and others.Deks, it is true, redirected, but yuzala - good mv - I used it well when I was frying the whites

and I have a stainless steel xatryulya suitable for Yummi - practically unkillable, I pick everything with iron.And when you choose, remember that the dex has 4 liters, against the YUMMIN 5.

Here the temperature regime was thrown to me with a similar mv, only under a different name, quite normal.

program default temperature default time
1 Rice / pilaf 105 degrees 45 min
2 Cooking 110 40
3 Yogurt 40 8 hours
4 Express 140 35 min.
5 Simmering 105 2h 30 min.
6 Soup 110 1 hour
7 Warm up 80 30 min.
8 Pairs 100 40 min.
9 Baking / bread 140 40 min.
10 Frying 145 30 min.
11 Bake 150 50 min
12 Braising 125 2 hours
13 Porridge 110 1 hour
14 Pasta 120 25 min.
15 Pizza 150 50 min.
16 Fish 115 30 min.
17 Meat 130 45 min
18 Meat on the bone 135 50 min
19 Bird 130 55 min.
20 vegetables 105 20 min.
21 Sterilization 155 15 min.

But I'm not trying to persuade you at all on yummy, otherwise I won't collect bones later. This is a purely objective review, as it were.

and by the way, the temperatures in the frying are quite capital. Why not fry. But we have no one, you never know what is written. And the dex is proven. It's up to you, again.

Thank you very much) Maybe I really was in a hurry with an opinion .... I just don't want to take risks, I want to wait for opinions about him, and you can take Dex even tomorrow. But how is Dex inferior to Yumi, I don't understand?

And that there are no temperature conditions and time in the instructions for Dex?

Girls, of course the 505 model beckons me, but I'm afraid to make a mistake!

Can someone tell me Yummy's objective flaws?

Can someone tell me Yummy's objective flaws?

no. Can not. Nobody has such a model

Here are the Internet, what a strange thing.

I sort of decided on a multicooker, almost bought it, and here you have a new model: more powerful, and more glamorous, and smarter, and all sorts of 3d and a ceramic pot ... I'm almost going to buy it, and then again ... a stone in the garden ... from competitors ... but the lid does not close, the pot smells of paint, does not pick at the end ... and in general ...

And everyone around is walking around and licking their lips ... but no one dares to buy ... so I walk around like a hungry tiger, dripping saliva ...

Current I think, if I’m wrong with the choice, then my wife will have to cut my brain for a long time about this, that I had to take something like my mother’s one, and it’s cheaper and more tested .. I want the current, then all the same is something funnier than mom's ..

100%

I bought YUMMI, the first one on the forum. All Panasonic, but I did not, but the price decided everything, it was 200 USD. e, p Panas maybe ...

bought a pig in a poke. On the spot, I found out that it turns out that the inner lid is there - it is more convenient to wash than in Panasonic. Well, etc. I still have no regrets. Cheek brings success
to catch up. When I don’t know the product, I start to study the face of the company - here Midea is not a bad face. That is, there is at least some quality control department, factories, power - there is some confidence that it is not soldered on its knees. Well, that's my personal opinion. And who strongly doubts, there is a tried and tested DEKS-wellkam - a rich topic, recipes, informational forum support. I can only say with certainty that having bought one MV and getting used to it, MV is already not enough and I want a SKOROVarku.

About the smell - I only smelled of new household appliances and then not for long. a couple of days

Here are the Internet, what a strange thing.

I sort of decided on a multicooker, almost bought it, and here you have a new model: more powerful, and more glamorous, and smarter, and all sorts of 3d and a ceramic pot ... I'm almost going to buy it, and then again ... a stone in the garden ... from competitors ... but the lid does not close, the pot smells of paint, does not pick at the end ... and in general ...

And everyone around is walking around and licking their lips ... but no one dares to buy ... so I walk around like a hungry tiger, dripping saliva ...

Toka, I think, if I’m wrong with the choice, then my wife will have to cut my brain for a long time about this, that I had to take something like my mother’s, and it’s cheaper and more tested ..I just want to, then all one thing is something more amusing than mama's ..

Ehh true

Moreover, I even ordered it, and then by chance I got to this forum and everything somehow went around in my head again)
but how you want to take a chance))

IRR, but you used both - in which milder temperature regimes - Dex or Yumi?

IRR, but you used both - in which milder temperature regimes - Dex or Yumi?

In Yummi, my milk ran out every other time. Until I bought a stainless steel bowl, the thermal conductivity in it is lower, it will correct itself with oatmeal milk. But! in mine there was not such a wide range of modes as in these last ones - for example, the mode of languor tempts me - I pin great hopes on it, and then who knows.
shl. in dex, by the way, I also ran milk oats. But there is somehow confusion and hesitation with this, if you listen to everyone, milk runs out from one batch, from others everything is regular. The third vapshche oatmeal and milk are not boiled