Kenwood Kitchen Machines

That is, it is better not even to climb yourself?

If there is no guarantee, then you can do it yourself.
Most likely you will have to change the regulator board, it is not difficult.
But you have to look for it, I saw it on ebay, but you can also search on our services.

Most likely you will have to change the regulator board, it is not difficult.

And for this you still need to disassemble? Or just remove the handle. I would really not want my husband to disassemble it uselessly

But you have to look for it, I saw it on ebay.

Vlad, tell me, please, what name to score in the search?

[Kara]

Vlad, tell me, please, what name to score in the search?

Tomorrow I'll take a look, I'll unsubscribe in a personal.



Kara, by the way, what brand of car?

Kara, by the way, what brand of car?

Major Titanium 020, it seems that the very first models with a 6.9 l bowl were called so

Major Titanium 020, it seems that the very first models with a 6.9 l bowl were called so

Then it is even easier, the regulator can be removed without disassembling the entire machine.

[Lyubasha]

Lyubasha, The beauty!! Have you already decided which attachments you want? There is not much time left before the New Year

Hello! I ordered a Cooking Chef KCC 9040S car, paid with a discount using a promo code. Thank you all for the moral support and the "magic kick"

The installment plan was not given, they said in order to avoid fraud, it seems they are reading our forum

Hello!
I have been reading and studying the forum for a long time. Long time to decide and choose KM. And now, finally, thanks to all of you, the choice is made!

I ordered a Cooking Chef KCC 9040S car, paid with a discount using a promo code. Thank you all for the moral support and the "magic kick"

Everything is exactly like Camilla's. I'm waiting on Saturday. Thanks to all!!!

[Camilla]

Camilla, Lego, girls, congratulations!
Kesha is love forever

[Camilla]

Camilla, Lego, hurray, we are waiting for the delivery!

They did not give an installment plan, they said to avoid fraud, it seems they are reading our forum

So the bank gives the installments, not the store. That is, the bank said so?

The other day I made Satsivi almost entirely in Kenwood. The day before, I cooked a turkey (thigh fillet and breast), although, unlike chicken, there was no fat in the broth. I had to use oil.
Chopped onions and nuts in the processor. Then she simmered the onion in 110 * oil for a long time, stirring flexi. Added nuts and everything else. Without stopping stirring, added the broth to the desired thickness and brought to a boil. And when I dipped the meat into the sauce, I made a mistake - I continued to interfere with the flexi. There was no need to do this, the boneless meat became almost a gruel. But it turned out very tasty. Now I will make satsivi only from turkey and in Kenwood.

[VRad]

VRad, I also like to stew chicken, and to do vegetable type sauté in Kesh. But, of course, I interfere with the stirrer. But red meat in a multicooker is more like stewing.

That is, the bank said so?

when ordering on the store's website, it was not possible to proceed to the payment by installments. I called the store, they spent two days solving the issue with the bank and in the end there was an answer - the bank refuses to avoid fraud. That is, there is no installment plan for the promotional code (but they are working on this issue)

Maybe someone will come in handy. cardamonclub until November 30th presents a promo code for a discount on the purchase of induction and a bunch of gifts)

today a letter came from the Kenwood Club
"Do you love cooking? Do you often bake cakes, make pasta or make fruit juice? And all this with one device? So you know the capabilities of the Kenwood kitchen machine and its accessories. Share your honest opinion with Kenwood and M. Video.The author of the best review will receive a Kenwood KVC5100T kitchen machine as a gift, and the prizes for the second and third places will be 20 and 15 thousand Bonus rubles from M. Video! The text should start with the words "Kenwood Competition". Works are accepted from October 17 to November 18. "
link under the spoiler

🔗

maybe someone from the members of the forum wants to take part

[Asvatova]

Asvatova, I looked, now until the end of November and without codes, a set of dough sheeters-spaghetti-tagliatelle is coming as a gift. Absolutely anyone. That's cool.

And with the cardamom code, the following nishtyaks are added:

- Electronic scales Kenwood ⠀⠀
- Unique branded Cooking Chef apron
- A coupon for 3000 rubles for a purchase in the cardamonclub store
- Free delivery from the cardamonclub store in Russia
- Free video lessons and life hacks how to make money by car in a closed group.

I would choose a code with a 10% discount (I wrote a couple of pages ago), because the savings are 7-8 thousand (from the model), and also scales and an apron. Although, in cardamom, cool stuff is sold and video tutorials are also a good thing. Here already on the preferences.

A lot of culinary bloggers have become ambassadors, all have their own codes and add. nishtyaki. In instagram, you can search by tags and choose what is more interesting as additional. presents. Almost everyone has the same + scales and an apron and + different things from them personally.

Hello, the second day I am reading about Kenwood machines and working with nozzles. I'm really looking forward to KVC 5100T., 4 nozzles as a gift and two I bought. Thanks to you, who write honest reviews and made the right choice for myself with nozzles. I missed only with one, only later I realized that I took the wrong grinder and had to buy an adapter. All these attachments were separately, but after reading, I took and ordered a car)))) a car. Of course I am worried and afraid ..... I can handle it. .blender 2. Cutting into cubes 3.vegetable cutter, 4.combine 5 meat grinder, 6.multi-chopper. In the future I want to order a nozzle for rolling dough and cutting spaghetti.
Now there are new nozzles and you can buy for the price of two at once, three. You can buy the old model. The question is ... how do they differ and which one is more convenient to roll out? In the old model there is a handle, in the new one it does not. Does it play any role ?

[Mara7]

Mara7, Congratulations! Excellent selection of attachments

The old model has a handle, the new one doesn't. does it play a role?

I have a "handle". It is convenient for me, when rolling out I already hang a long strip of dough on the "handle". And so, no matter who gets used to it.

Thank you very much!!!

[Mara7]

Mara7, Congratulations on your useful purchase!
About rolling.
The new one is more convenient to store, it is more compact, and the old one has an additional crossbar. Some people think that it is superfluous and almost never use it. And I use it all the time, because I often skate long stripes, and this bar is very useful for me - just a third hand.
Good luck!

In general, my husband could not disassemble Kenwood (well, what can I do if the pens are not from there)

Why don't you want to invite me home? They called me, asked what happened to the car, asked to send the video to them.

Please tell me how you were looking for a master? Through you.do?
Phoned all the official Kenwood service centers, and only one single Transservice-95 repairs kitchen machines. The master is not sent to the house. She explained what was wrong with the car, they said, repair from 30 working days

In general, my husband could not disassemble Kenwood (what can I do if the pens are not from there)

What didn't work out?
If you need help.

Vlad, he unscrewed the screws at the bottom, but he never found the pin that needed to be knocked out. Well, when I saw the spring, I said to look for the master. He's an IT specialist, damn it ..

[Kara]

He's an IT specialist, damn it ..

So colleague
Everything is in order, the pin is on the side of the case.
Now I'll find the photo.



Kara, Irina, here are the posts in this thread about this pin

Kenwood kitchen machines (part 3) # 2504

Kenwood kitchen machines (part 3) # 2507

There is a photo and all description
If anything goes wrong, please.

Thank you very much! And this pin needs to be knocked out from the inside? And this infernal spring won't jump out?

And then my hero has already repaired the pedal on the sewing machine for me. I pulled out the cord strongly, and it did not stick back. Well, my faithful spins the pedal, from there the spring will jump out, miraculously not cut anyone (its edges are very sharp). Well, now I'm winding the cord around the pedal

And this pin needs to be knocked out from the inside? And this infernal spring won't jump out?

The tip of the pin is gently slotted (flat) with a screwdriver, and then with pliers slowly.
At the expense of the spring, but it will pop out BUT then it is not difficult to insert it.
It is better to disassemble the car when it is on its side and "open" (the spring will be in a weakened state), observe for yourself, it may not even require male help
If necessary, I will make a disassembly video

Phoned all official Kenwood service centers

Did you call the hotline? A service center that repairs cars on Suschevskaya (where the showroom, MK and the main office are held).

🔗 - there are tel. mountains. lines

Did you call the hotline?

called, I was sent to this Trance. 95

[Kara]

Kara, hmm, sadness.
I wonder what happened to the service on Suschevskaya (rhetorical question)

And here?

I did not call this number, I will try tomorrow morning. Thank you!!

I saw a beautiful video, though in Polish


I liked it and found the site. The Poles have already made a beautiful Kenwood Club. Without registering a car, there are only two recipes available (maybe someone else understands Polish besides me).
Link under the spoiler

🔗

And also very cool 10 videos (click on Oszczędzaj czas z robotami Kenwood), where the frame is divided into two parts - in one hand they do it, and in the other the same thing on the machine using different attachments. Very beautifully filmed - pavlova, burger, bread, cream, madeleine cookies, dumplings, chocolate cake, salad, pesto, cold tomato soup (a variation of gazpacho). I looked at it.

Please tell me how you were looking for a master?

I called the hotline and outlined the situation. They asked the car number, when and where it was purchased, offered a choice of two services. I said that it is desirable for me. that the master would come home, they wrote down, they said - wait for the call. They called a week later, the connection was not very good - it was not possible to talk, they called back a month later, they asked if she changed her mind about fixing. We asked. what about the car, I outlined the situation, asked to send a photo of the check and the warranty card to the post office, to shoot a video of the machine's operation. A week later, they called and said that they would change when the master arrived. The master arrived, after certain dances he replaced the spare part, while everything is working.
Contacts from correspondence:

Igor Glukharev
CEO
LLC "DELSER"
t. +7 (495) 510-81-72
dir @

I called them, answered all the questions.

And here?
Premium Service: st. Suschevskaya, 27, building 3

Since I live nearby, I called them first. They offered to bring them and leave, pick them up in a month. But they only have a reception point there, they then take it somewhere for repairs. I didn't like it, I didn't really want to leave the new car unattended. I thought I would bring it and fix it with me.

Called a week later

called back a month later

A week later they called

What nimble guys.

What nimble guys

The soldier sleeps, but the service goes on.
I did not have their contacts then, I did not know from which service they called. My old Bosch was there, while she was waiting, he helped out.
You can try to call them directly, I think it will work out faster.

In general, dismantled with grief in half.
Inside under the switch is

The red arrow indicates the stop position. And green - what is this pipka? What is it for?

In this photo, the arrow shows the "scrolled" position, just when it gets into this "pen" - this is already below the designation P (impulse mode), from which in the normal state the regulator itself should have returned to the "stop" position if you release the handle ... Instead, it gets stuck there, and in the opposite direction (clockwise) no longer scrolls.At first glance, there is no mechanical damage, why what is happening is not clear.

And this is what is on top, do I understand correctly that the problem is in this black box? If so, is it possible to change it separately (and where to look, and what is it called?) Or do you need to change all this garbage, to which the box is attached?

[Kara]

Kara, Irina, Your limiter is shown in green.
You are absolutely right from the afterburner should come out under the action of a spring. The black box is an encoder (variable resistor), of course, you can search, but the probability is small. You can check it, carefully connect all the wires and twist it with something, if the speed changes, then this is in order. If not, then disassemble and see what and how.

The limiter is shown in green.

And how can he limit something if he does not cling to the piece with the cog (in the picture)?

Or did we break something there?

[Kara]

Kara, Irina, you must see.
I'll take it off and see

Hello girls! Need help from the audience! I ask for advice and a kick in the right direction !!! I stand at a fork .... There is an opportunity to buy Kenwood KMM 060 from hands without a guarantee for 10,500 UAH. Judging by the series, not older than 4 years. The hostess says that she does not remember when she took it, but she remembers that she practically did not use it) "well, maybe 10 times". Essentially a cat in a poke. I know that this is a descendant of KMM 020. I also know what differs from the last brand only in the absence of backlighting and smooth adjustment. I see no reason to pay 20,000 for the latter.
On the other hand, for the same money, 10-11 tons UAH, you can take Kenwood KVL4170W, or Kenwood KVL4220, or Kenwood KVL4100S
CHEF XL Silver, or Kenwood KVL 6100 S Chef Xl Elite. The class of combines is lower. Maximum blender included. So everyone is naked. All harvesters are imported from Poland on order and are resold with a 12-month guarantee from "Uncle Vasya" ((the same cat in a poke. Buying in office stores is much more expensive. Europe. And then they sell it as their own almost unused. In general, without a guarantee. You can't trust anyone ....
I don't consider it with a small bowl. Additional attachments are not currently relevant. There is a Braun K700. Before that, there was a Gastrorag QF-3470 dough mixer with a 4.5 l bowl. The bowl is too small) everything tried to escape. But without it, it’s like without hands ... True, there is an alternative to Keshe- GASTRORAG QF-EF723. The issue price is not much different. About 9-10 t. UAH. With a discount now for 6 800 types you can buy. But this is not Kesha! And it's not worth it nearby) At the same time, it has a power of 1500W, but the sellers have a reservation that you should knead gingerbread, bread, pasta and dumplings dough in it! So the competitor is only in terms of money, but not functionality. I have experience in equipment repair. As a result, I came to the conclusion that everything is essentially working while it is working. Nobody wants to fix it today. Only what is under warranty is subject to repair and replacement. There is no post-warranty repair in principle! Spare parts are not imported. Only what comes with the disassembly of the broken one is under warranty.
Fuh! Head is spinning. I will pick it up for another day and, as always, will be left with nothing. Already tired of poking around in this. Well, I really don't like to choose

[malInna]

malInnaVery difficult advice you are asking.
How can you advise here, since it is about a lot of money?
I would choose the first option, other things being equal, the class of the car is higher.
But it's up to you to decide.

[venera19]

venera19 Thank you for your opinion! I also tend to this option. But doubts still gnaw. I don't understand a bit how to check the car at the post office. Are all nozzles idling? at every speed and so as not to cling to the bowl? Visually for damage and scratches? I won't see anything else. If it is working without load, will there be problems under load?

When I took Gastrorag to the Metro, we managed to fire the first one right in the hall during the check. True, the manager immediately brought out another without a word and he worked faithfully for 6 years! The development of the motor shaft is now not being repaired ... And there are no spare parts for it (

[malInna]

malInna, a very difficult question, it's true.
Keshi are 99% centenarians. And their service + - works, because the guarantees are poured for 5 years (abroad all 10 for motors from the latest flagships). Should carry spare parts.

I don't even know which one to choose. But if there is an opportunity to go and see, then I went. The reseller or owner can be identified by management questions. I would listen to the sound at different speeds.

Here, in Italy, kCook Multi Smart is sold to Club members with a discount of 150 €.
€849- € 150 = € 699

[VRad]

VRad, do not tear your heart!
I want him for a long time. But we do not sell it (although, who knows, the second model has Ukrainian in the multilingual manual, but the first did not). And there is no club in Russia. The Russian division in this regard causes one sadness.

[malInna]

There is an opportunity to buy Kenwood KMM 060 from hands without a guarantee for 10 500 UAH. Judging by the series, not older than 4 years. The hostess says that she does not remember when she took it, but she remembers that she practically did not use it) "well, maybe 10 times". Essentially a cat in a poke. I know that this is a descendant of KMM 020. The fact that it differs from the last brand only in the absence of backlighting and smooth adjustment I also know.

malInna, stepless speed control is available in all Kenwood km! If you can't wait for the 23rd, Black Friday, that year there was a 50% discount on the most expensive model on the off-site (look at the Rosette). The Elite series is the most excellent series, 1400W, if it's expensive, then you can consider km with a power of 1200W, personally I have a 770 with such a power and a bowl of 6.7 liters. I knead the dough from Italian bread to dumplings (any moisture on the shoulder, rye with 60% rye flour, easy), use a meat grinder 1 - 2 times a week, beat eggs, protein, stir minced meat - I'm not talking about such a trifle ... The attachments were made of silumin, I replaced them with stainless steel.
If you stop at 060, then check the operation of the motor at all speeds, see if there are any scratches, if the head rises smoothly and freely.
Look at the bowl, from it you will understand that they have used 10 kilometers in 4 years or several days a week. Now, if I had such a problem, I would choose a new one with less, but quite sufficient, power, but new.
I wish you success!

[Peter Push]

Peter PushBy the way, Black Friday is the same.
And in general, great advice, I will subscribe.

Thanks to everyone who responded! I will not go 500 km one way. Is that cash on delivery and New mail. And there is already to look. And what can you see from a stainless steel bowl? Scratched inside? So it can be inherited in one go. Loss of gloss on the outside? Enlighten, pliz! It's stressful that there is no cover) If a new harvester is stored in a box, how can you lose the cover? As the saying goes, "the spoons were found, but the sediment remained"
And I didn't think about Black Friday .... Thanks for the idea! I'll see what our sellers have to offer. My needs (cake, cream, marshmallow, butter, meringue) for the shoulder and km with a power of up to 1000 watts. I haven't reached the bread yet. I want to try making noodles at home for a long time. But old Gastrorag would not have survived this. And with my hands ... I am not capable of such a feat!

[malInna]

And what can you see from a stainless steel bowl? Scratched inside? So it can be inherited in one go. Loss of gloss on the outside? Enlighten, pliz! It strains that there is no cover)

malInna and on the bottom, look and see right away, and along the ledges (where the bowl is inserted) it will be seen that after about six months of operation, the paint begins to wear off. The condition of the nests is also visible. My lid is crippled, dropped on the tile floor. Google spare parts for km Kenwood, there you can buy a lid, without it, the dough is bad to defuse. Start looking at km with power from 1200W. Look at the CFM. Good luck!