Kenwood Kitchen Machines

[Miranda]

Miranda, Thank you!
1 minute is great!

Good time! Has anyone come across the registration of an additional guarantee for 5 years? The service is just disgusting, as is the feedback. Car and box have 3 different serial numbers. I contacted the hotline (since they do not answer the mail), they registered the appeal there. Dictated by email mail by letter. In short, no answer or hello. either they made a mistake or so the work is organized. As a result, one number came up, but the site gives an error, because the program is suspended. In short, the attitude is terrible ... How did it go?

[Sergey01]

Sergey01, similarly, all word for word as with me about the hotline and about the codes on the box.

[her]

Car and box have 3 different serial numbers

What you want to register - then write: if you want a 5-year warranty on the box - write the number from the box, and if you want a warranty on the car - write the number from the car or from her passports. In fact, there is confusion with the numbers.
I had no problems registering with a 5-year guarantee: I did not do everything by "typing", but first figured out this issue, and then from the first time I issued a guarantee on the site.
True, it was a long time ago, but since then many have registered everything normally.
Questions, of course, sometimes arose, but more often their own inattention was to blame.
So calm down, please, sort out the numbers, and when the registration page starts working again (if it is in it), try to register normally again.
You can also check: it may be that your registration has already passed, after all, you tried to do something (?) Several times, so the program generates an error for new attempts with the same numbers. Try the hotline to find out if your registration was successful.
In any case, it is not urgent, you can do it at least a year after the purchase.
Good luck.

What you want to register - then write: if you want a 5-year guarantee for the box - write the number from the box, and if you want a guarantee for the car - write the number from the car or from its passport.

In fact of the matter. It is logical to register the license plate from the car, but the site says that the license plate is not correct. The same number is on the box. The other sticker (on the box) has 2 more numbers. All of them are labeled "serial number" or "serial No." On the registration page it says take the number from the box. There is also a photo of this number (or rather, there should be no file). As a result, the number on the car and one number from the box were recognized by the site as incorrect, and the site accepts the remaining number, but the service is still not active. And the warranty card is not completed (only the seal is worth it). The seller was too lazy to do this, shifted his direct responsibilities to the buyers.

When registering the serial number of the machine, I received a message about the need to enter the number indicated on the box

Now nobody fills out the warranty card
The main thing there is that the seller's seal should be, and that it coincides with the "LLC" on the check. Accordingly, the warranty period is counted from the date of the check.
And the failure can be on any site. Therefore, sort it out on the sly with your new technique, and try to register again in a couple of days.
There was also a case that the boxes were mixed up and something did not match. Either the box was from a returnable technique, or someone had already registered this number before.
Don't panic just yet, try signing up later.
Incidentally, what is your model? The 5-year warranty, alas, does not apply to all equipment.

I always get filled up when I buy in regular stores I don’t bother with inexpensive equipment.And it helped more than once that the ticket was filled. Machine 096.

096.5 year warranty applies to this model.

Yes, it does. Hopefully the next time I try it will work out.
Good luck!

The main thing there is that the seller's seal should be, and that it coincides with the "LLC" on the check. Accordingly, the warranty period is counted from the date of the check.

And I have no seal on the warranty.
Just a check.

Will there be no guarantee now?

[Miranda]

Miranda, but you can look for a seller and eliminate this misunderstanding? It would be necessary to put their seal on the warranty card, otherwise the warranty period will be calculated from the date of production.

[Olga VB]

Olga VB, and what to look for - Technosila.

Isn't the date of purchase on the check an argument for starting the countdown?

[Miranda]

Mirandaif the product (name) is indicated in the check, then the check is enough. It's just that earlier checks were simple, only amounts. So it was necessary to fill in the guarantees. And now checks are almost everywhere with the full name of the product and the seller.

[Anchic]

Anchic, all positions are indicated.
Plus a sales receipt with a transfer.
And an invoice with a list of delivery.

But it's not difficult for me to enter Technosila either.
True, I do not know if they will fill out my warranty card after a while. The purchase was on June 8th.

Must be on demand. You have all the evidence on hand. But, probably, this is not so necessary if you have an invoice and a check with full details.

[Olga VB]

Olga VB, I remembered that there was already a similar conversation about this.
And the three serial numbers too. I rummaged in my messages.

There are indeed three numbers.
1. A number of many numbers and letters (18 pcs.) And the word serial number, located on the bottom of the car.

2. A 7-digit number and the word serial, located on a sticker near the cord. For a 5-year certificate you need one.

3. Number of 5 characters (two digits / letter / two digits), it is on the bottom of the machine.

1.and 2.must be on both the machine and the box, and preferably match.

I then called the service center to ask about the check and about the numbers. Their answer is what kind of numbers are - under the spoiler.

About the serial number.
The hotline did not know, but the technical department where they were transferred knew.

Previously, for the service center and repairs under warranty, a 5-character number was important - two numbers / letter / two numbers. Where the first two digits are the year of production of a particular model, and the last two are the week of production (there are 52 of them per year). This code is on a small piece of paper at the bottom of the car. Now you can find out in what year your typewriter was made and how long it was waiting for a meeting with you.

Then a second piece of paper was glued to the bottom of the machine - a barcode with 18 symbols (letters and numbers). This is the same serial number that you need to enter in the paper warranty card, it is on the bottom of the car and on the box. But any code that is glued to the car and is inseparable from it can be inscribed, since the seller may not know the Kenwood rules. But it is better to make sure that the correct one is 18 characters.

But why, for a 5-year warranty, they are asked to enter only 7 digits from the sticker near the cord, the technical department does not know. They say, they say, we ourselves do not understand why they programmed it this way, most likely so that it would not be difficult for buyers to enter 18 characters.

Completed guarantor. coupon or not, and in general his presence - it does not matter. They read me an article from the consumer law in their own words (I didn't remember the number) that having a check is enough. Plus a certificate for 5 years.

Hope this clears up all the questions.

Perhaps information about the three serial numbers, what they mean, and which one should be entered in the 5-year warranty certificate can be taken out somewhere, for example, here Kenwood kitchen machine. Useful links.

[Miranda]

Miranda, Thank you. I can't get to that topic in any way, although there are blanks for it

[Olga VB]

Olga VB, not at all
what are you talking about, you have so much work to do!
It's a very lively topic! There are always many messages.

[Miranda]

Mirandaif the product (name) is indicated in the check, then the check is enough. It's just that earlier checks were simple, only amounts. So it was necessary to fill in the guarantees. And now checks are almost everywhere with the full name of the product and the seller.

+1.Recently I had to drag the goods (cache) to the warranty workshop. They only asked for a check.

[KLO]

KLO, however, a guarantee is needed to put down the data on the repair and the dates from-to there. The warranty is extended for the duration of the repair.
Or they must give an act about it.

[Miranda]

Miranda, they gave me the act, they fixed everything very quickly.

[KLO]

KLO, well done!

By the way, I went to check my check. And just in case I photographed him. And then it is on paper that wipes off over time.

But you can always raise the story in the store and in the bank if you pay by card.

[Miranda]

Miranda, yes, the service is excellent, surprised, surprised (repairs in Rostov n / a). In the meantime, I was looking for a check, my manager (Natalia, she also consulted during the purchase) explained that the main thing is to know the day of purchase, ideally the time.

They gave me the act, they fixed everything very quickly.

Then someone mentioned problems with the repair of Kitchen Aida. It turned out that Kitchen was bought by Whirlpool, who had also bought Ariston and the Russian Indesite before. So it is the Indesit network that provides the local American service. Hence the problems. Kenwood has a DeLong service so far.

[Paul I]

Paul I, I had some problems. Only not in repair, but in total
And the fact that the breakdown was not recognized as a warranty and was said that all attachments, meat grinders, juicers are for beauty. Kitchen's main purpose is a kneader.
I'll do anti-advertising for them at every opportunity

By the way, the service website is full of spare parts. Prices are great. Any wick costs like a whole nozzle ordered from behind a hillock.

Tell me good people. Kenwood Км094 / 096 what is the maximum amount of flour milking yeast dough you can put in it? Or maybe there in max, the volume of the test is measured, I don't remember.
There was a book somewhere in my computer, but I can't find it. And today to make an order, so I'm thinking whether the cache will withstand a double order at once or not.

[Oksana]

Oksana, I kneaded 1.3 kg of flour in 020 (for bread), since 094/096 are the same, only with induction, I think yours will survive.

[Oksana]

Oksana, the instructions should indicate the maximum weight of the flour. I have it on Bosch. Moreover, separately for yeast dough and separately for dumplings.

[Oksana]

Oksana, steep yeast dough 1.5 kg flour, weak yeast dough-2.6 kg, shortbread 910 g.

[Anchic]

Anchic, I say I can not find the instruction now.
kseniya D, thanks, then it will do.

[Oksana]

Oksana, I did not perceive that the instruction was in electronic form I have it in paper

Girls, I have a question and it's pretty urgent! During the night I need to decide which of the Kenwoods to take. I began to choose, and there are many modifications of them. Advise which one to take?
This is, for example, KVC5000T or KHH326WH. Help me figure out what are the differences and what should I look at? I read that some have plastic attachments. In general, I just got confused, and time is running out.

KVC5000T

this.
IMHO It is more versatile and professional. so to speak dad, and the second youngest son. Replaces, but still not a man yet and mind too. Something like this.

[Vinochek]

Vinochek, Thank you! It is also heavier, so solid, I judge from the description. Didn't figure out what the morning came with? Do not know?

Didn't figure out what the morning came with? Do not know?

set minimum:
3 bowl attachments:
K-shaped kneading nozzle
Ball whisk for whipping
Kneading hook

[Bast1nda]

Bast1nda, if only of these two, then I am also for Sense KVC5000T. Multi van is quite a beginner.

Why only of these two?
Some kind of discount somewhere?
How much money and what city - maybe some other model + - 1-2 thousand in a given amount? Or have you already reviewed everything and not knock you down?

[Miranda]

Miranda, knock on induction!

[Twig]

Twig, no, induction is still more expensive than the declared models.

Yes, the fact of the matter is that you need to buy, since my previous Bosch got tired, he was 15 years old, and fed up, he will go to the garden. Plows still. And if I have to - I want a good one, I get used to the technicians.
We arrived in the m video, well, here we dance from what we managed to see. Well, I've already looked at the site. There are no more expensive models, if only kitsch or smig, but it costs the same. There is also a Kenwood model stock for nozzles. I didn't remember just which one they give))))
I don't bake or cook professionally, the volumes are small.

Posted on Friday 25 Nov 2016 10:59 pm

I found it with induction. Well, I won't say that I really need heating. I need a durable unit without problems.
The main thing: whipping, mixing, minced meat, shredders, I use this all the time, well, the bowl is large and metal. Excessive bells and whistles are not needed, I really appreciate my cooking capabilities. I am constantly at work. We'll have to cuddle him tomorrow and probably buy additional nozzles.
Does the ice cream maker normally cook or shouldn't you take it?

When I started choosing a harvester, the Kenwood KMC 050 harvester was recommended to me in the media market. It has much more attachments, and it is "iron", but the price tag was high there.
Now I looked at the prices on the Internet. There is an offer with a difference of 2 tons with the 5000 model.
But, that was the opinion of the seller. And as a result of communication on the forum, I bought 096 (while I also 10-12 hours at work)

[Natalia]

NataliaThe beauty of the ice maker is that the bowl can be used.
Induction models may not be available in stores. So "cuddle" may not work.

Posted on Friday 25 Nov 2016 11:19 pm

It seems like induction is an extra bells and whistles.
At the masterclass, they were convinced that you can calmly cook sous-vide, the temperature is kept normally.
Today for dinner I made a soup-puree from zucchini, as in a master class.
In a bowl I directly fried the zucchini, onion and garlic, diluted with water, added cream and blended right in the bowl at the end. The beauty! As a result, one bowl is stained. It remains only to sprinkle with grated Parmesan on a plate.

[Bast1nda]

Bast1nda, Natasha, and what is the price of the selected devices?

well, the bowl is large and metal.

The bowl you have chosen is not the largest, although 4 liters with something may be sufficient.
Big at Kenwood is 6.7 liters - in inductions, majors and Sense XL

[Bast1nda]

Well, I won't say that I really need heating. I need a durable unit without problems.
The main thing: whipping, mixing, minced meat, shredders, I use this all the time, well, the bowl is large and metal. Excessive bells and whistles are not needed

Bast1nda, NataliaSuch a unit is bought for many years in advance, and its main charm is that the functionality can be expanded gradually by acquiring additional. attachments as needed.
For example, if 4 years ago someone advised me to buy a multicooker, let alone some other appliances, I would laugh out loud. And I bought bread in the store, and I had a manual meat grinder, and the mixer was only manual ...
Now I laugh at myself 4 years ago.
When choosing a kneader, I also considered different models, not only Kenwood, and also believed that I did not need a very sophisticated one. And now I am very grateful to my husband, who insisted on buying a heated KM.
By the way, these are not only produced by Kenwood. Including metal and with a large bowl, but at a more pleasant price.
Good luck!

We arrived in the m video, well, here we dance from what we managed to see.

Wow .. Model Sensa 5000 in 003 is almost a third cheaper than in Mvideo.)

[Bijou]

I found induction on the site, the price for it is a little more expensive, but I'm not critical. (girls, the phone costs more than this typewriter) and I take the typewriter to make my life easier, so there are no restrictions on the amount. like a gift for the new year. This is me about the framework of reason. I saw there are other companies, but as I understood from life experience, miracles do not happen, there is the best possible, but there is a compromise. And then regrets begin, why I didn’t take the best right away, I did that with a bread maker, two others, then I climbed into this forum, because nothing came of it ..., then the Panasonic of the extreme model and crossed the heel, I think and why did I suffer, so taught.
(by the way, in the m video they offered mulinex with all attachments and for only 29,000, but I don't want to compromise). I have been reading your branches about Kenwood for a long time, because I understood that sooner or later my Boshik will get tired completely, but he is not tired yet, I change him in advance, I send him - he works in the country, in the fresh air, I love him, by the way! It is plastic, it shakes a little when it works, but nothing, it's alive! so I understand what I want, for 15 years I have identified addictions.
I want a metal one, with a normal metal bowl, with attachments: a meat grinder, shredders, whisks, hooks, you can use a juicer and a sausage. I have a cool freestanding blender, so it's not essential to have it in the kit. freezer. I have a pasta machine.
Girls, throw me some more nozzles, that he has a good one, I read, but I will not reproduce it right away. There are also millers, a citrus juicer.

Posted Saturday 26 Nov 2016 09:17 AM

Bijou, is this about the KVC5000T? the difference with m video 7000. yes, there is such, but the delivery to us again and not really check. So I'll take it from the store with a check.

The Sensa 5000 model in 003 is almost a third cheaper than in Mvideo.)

on BT it is 36t.
I have 5030 (it differs only in the presence of a blender and a meat grinder). I took second-hand from our members of the forum (I LOVE YOU!) In good condition. I'm happy with aki elephant.
And about the attachments. Do not listen to anyone with advice such as "I do not use a blender, I do not use a souffle", etc. See for yourself according to your needs, since only you know what you may need. It is worth listening to advice such as "I like it very much" and "I highly recommend it." (Thank you for being persuaded in due time for a souffleka and an additional bowl - Lenochka, Masha). The rest is up to you. I use a blender VERY often and a lot of girls sell it. I wanted a food processor, but I couldn't. I bought it, but he did not come up to Sens (
we didn’t look with the seller), I wanted to buy a pin into it and use it, but I sold it and now I don’t want to, because the blender replaces the function for which I wanted to buy it - grinding. My vision of a blender turned upside down a bit as it turned out to be very versatile. I used to only use the blender for cocktails. but here there are very great opportunities for a very small number. And the spoon in the new one is just a find, and the fact that the blender understands (you can clean everything to the last drop).
I often use a multi-chopper (even for 1 serving of protein shake to my husband).
Sieve (not only for wiping, but also for sifting)
Soufleika (really mixes everything better and does not settle)
Flexy (just super)
I don’t have anything else yet, but I’m thinking about a dough sheeter and noodle cutters (I have a manual one), a vegetable grater (as it turned out that I’m not too lazy to immediately rinse the blender after using, and this is already progress).
If finances allow, then take 096 unambiguously. Even if you use the heating once a month, you will still remember us with a kind word. on BT it is 56 thousand. worth it.

Posted Saturday 26 Nov 2016 09:23 AM

yes, there is such, but delivery to us again and not really check. So I'll take it from the store with a check.

Where are you from? just if you take it in an official, then you can check it at home.

[Vinochek]

Vinochek,
+1
Yes, upon delivery, the officials give time to check. Everything is very neat and "tightly" packed. I also thought that I was unlikely to use the heating, you can use the stove, but now I am very pleased that this function is there. Charlotte heated with me goes with a bang, while with a minimum of body movements.
The only thing is that the 6.7 liter bowl is too big for me and it is heavier. But there are no others with induction. Now I'm used to it. Overall, I am very satisfied!
Good luck with your choice!

[Bast1nda]

Bast1nda, if the price is ok for you, and the bowl is 6.7 liters. ok, then I'm in favor of induction.

If on kenwood_bt, then delivery is fine.
And you can check.

096 is now 60 thousand, 094 - 55 thousand
They are no different as machines, the differences in the configuration - the 5 thousand difference includes a blender and a food processor ( 🔗 ).If money is not important, and a blender is not needed, you cannot buy a food processor for 5 thousand.

I have induction and have never regretted a single ruble.
Induction is not only heating - choux pastry, cream, mousses, sauces, cook something, proofing right in the bowl. The induction machine also has a built-in timer and thermometer. The timer is also available in models without induction, but they are not sold in the Russian Federation.

In the timer, I see how much the machine is running, for a mini-grinder this is of principle, it cannot be turned for more than 2 minutes, although it never took so much. But for coffee, for example, I know the time for the degree of grinding and the amount, I picked it up by sample. Or whipped the squirrels once to the foam, so now I know that with such and such a quantity and time, you can already stop. The timer adds up the total cooking time, if needed.

You can also set the timer to count down. She put the dough to stir for 15 minutes, for example, and left. The car will stop by itself and give a signal.

The induction motor has a protective cover for the motor. Someone here recently asked about mashed potatoes in a non-induction model. Like, steam comes from hot potatoes and how to protect the motor. Although, I don't think that the motor without protection will suffer in 3-5 minutes of whipping mashed potatoes, but with such a lid you don't even think in this direction.

Even the induction model has the best hook.
This has already been discussed so much here, shown in pictures. And so as not to look for it, I just tell you the final conclusion of the multi-page discussions - a great hook.

Doesn't mean that the hook is bad in other models. They are good too.
Anyway, all models are good. Just for different wallets and tasks.

If money allows, then it is better to take induction, even if you do not bake to order. And if they don't allow it, then the average price range will be good.