Blender with replaceable knives Element EW06

On Saturday I was in Ashan Krasnogorsk - a couple available, at the same price 2.5 thousand Extras. there were no discounts.

[alba et atra]

alba et atra,
Yoperny theater, Len, there were definitely 3 of them ((If I knew then what someone needed, I would take it, I only go to Ashanpkh ((

Yes Marina, kartinka, had to, I went for her.
It's a pity that the blenders didn't wait for me ...

[alba et atra]

alba et atra, Lenochka, thank you for your concern. .. I didn’t say anything to my friend, well, well, otherwise she would only worry in vain, since it didn’t work out, we’ll wait with her for other opportunities, maybe we can still take it. Thanks again 🌷🌷🌷🌷

Information for those interested.
There is a blender in Ashan in the Gorod shopping and entertainment center, Ryazansky prospect, 2.
Summer price, 2.5.

[alba et atra]

Blender

alba et atra, Lena, I seem to know everything, except for this rectangular transparent container. I see that there is a brush, a spatula and a knife inside. Is the container itself complete with a blender, or is it something separate? I read, some of the girls wrote about different configurations (or undercompletion).

[Ilmirushka]

Is the container itself complete with a blender, or is it something separate?

Ilmirushka, this is a sealed Ashanovsky container. Small valuable parts are put there so that they do not get stolen from the store. He will scream a lot when trying to take him out and passing through the frame, I think so.

this is a sealed Ashanovsky container. Small valuable parts are put there so that they do not get stolen from the store.

aaa, there it is, well, yes, how else to save this little thing.

[alba et atra]

alba et atra, Lena, I seem to know everything, except for this rectangular transparent container. I see that there is a brush, a spatula and a knife inside. Is the container itself complete with a blender, or is it something separate? I read, some of the girls wrote about different configurations (or undercompletion).

There is a complete set!
I'll go for two blenders tomorrow ...

There is a complete set!

: victory: so for me too, Lena, I just could not understand what the container was.

: victory: so for me too, Lena, I just could not understand what the container was.

Sveta wrote everything correctly so as not to be privatized unnoticed ...
I advised them to put all the parts in the container. They listened and thanked.

I'll go for two blenders tomorrow ...

What, again ?!

What, again ?!

Aha, Anh, again ...

and I managed to buy goods)))) with this toy ... so pretty white ...
A stand is a thing! Put it on the tabletop and use it.
The volume of the mill is the most ... You don't need more. I will sell my 600 ml chopper as unnecessary.
The whisk is super. Mashed potatoes are really the best for them!
I haven't gotten to mayonnaise yet.
Two speeds for the eyes. For power too.
Where can I get a set of glasses? in stock? and a brush and spatula pieces 10? spatula is just a bomb !!!
For large volumes there is a boshan with a cube, then I will add ken with induction.
It remains to check that at least 5 years has worked ... Better 10, but for now we are waiting for 5

Alas, I worked about five times ... I didn't have time to try all the nozzles, everything fell apart during the whisking process from the inside, all the plastic broke off, which could not be repaired .. if a nozzle broke, it’s not so offensive, you could use others .. and there is nowhere to stick the socket inside, as if the plastic crumbled ..

fell apart while beating with a whisk

Horror!!! Maybe it was dropped?

The whisk is super. Mashed potatoes are really the best for them!

Achum! I broke the adapter on potatoes (another blender), and you do it with a whisk ..

and you do it with a whisk ..

I am also in shock .. the power there is very weak .. I don’t know how it is? Maybe one potato was ground and whipped

[zvezda]

zvezda, our potatoes are not something for you, now I think how to glue or where to get them out, dumplings with potatoes are my favorite, and using a crush is lazy and boring. Although faster.

[Anna]

Anna, I am a sloth and the young lady Kesha does everything for me, and I: beach: he will take anything from me!

so right there before me I don’t remember on which page the girl was telling, first crush the potatoes with a crush, and then beat. I tried a knife for mashed potatoes, it's also cool, but such mashed potatoes are too straightforward ...)))) And the crush, then the whisk is the most ...

And I whisk the potatoes with a whisk, after adding milk and mashing a little with a fork. I really like the puree and the process. I began to make mashed potatoes more often. I really don't do much. For two for one time

Girls who made mayonnaise with a stick on eggs, share the secret of how you did it? something didn't work out for me.

I made mayonnaise from the proposed green book, everything worked the first time. But milk mayonnaise did not work out right away.

and everything thickened normally?

From the book, the mayonnaise turned out to be normal, thick. In general, I like mayonnaise with egg more.

[lexandrina]

lexandrina, Alexandra! I also succeeded with a stick the first time. But later it didn't work a couple of times. I added another egg, then everything thickened fine.

So how much butter is needed for one egg? salt, sugar, vinegar or mustard to taste?

So how much butter is needed for one egg?

From 150 to 300 ml.

salt, sugar, vinegar or mustard to taste?

Depends on the amount of oil and, accordingly, mayonnaise. For a jar of 0.7, I usually use 1 tea salt, 1-2 sugar and mustard each, instead of vinegar, I squeeze juice from one lemon weighing 110 g.

girls, thank you all, I'll go try!

[lexandrina]

lexandrina, Alexandra! The girls wrote to you about a recipe from a book for a blender. Now I definitely won't remember him. Tomorrow I will get a book and from there I will rewrite the recipe for you. It's already night with us.

I have a book))) thanks, I'll go experiment with all the recipes

I tried to grind the onion in a mill. I ground it with a break for a couple of minutes, but it didn't work out like that.

and I have three small onions, they ground perfectly into mushrooms
it is better to cut them into a couple of parts in a mill

I cut a small onion into 4 pieces.
But oatmeal begs perfectly

[Marfusha81]

Marfusha81, 4 large apparently? Always to chop into an absolute porridge I cut 3 cm somewhere if a large onion. Small, of course, in quarters.

The link to the recipe book is on the first page. If anyone has lost

Miranda thanks, everything is there. both on paper and in e-mail (1 page). If not for a book in an e-mail and a blender I would not buy. I would take brown

Good day. Hostesses of such a blender, please tell me, is there any point in buying it at a price of 4990? How does a blender work? The model is not very new, reviews about it start in 2014.

depending, probably, for what purposes.
After Brown, I never got used to it. I don't have enough power.
Even a milkshake does not penetrate well.
Therefore, for such a price, you can see a lot of other things.

Good day. Hostesses of such a blender, please tell me, is there any point in buying it at a price of 4990? How does a blender work? The model is not very new, reviews about it start in 2014.

good day. the blender cost me less, but I wanted it because of the emulsifier stick and the ice pick, because there is still a combine at home, and a little later I plan on kenwood with induction. therefore, the load on this blender is very small ... I like the mill with him, it is small and more convenient than mini-grinders in hand blenders, there are usually more volumes, I don’t need this ... I personally have enough power for my needs ... And it's easier for you to decide whether you need or not, scroll through the whole topic, there are not many pages here ... and then decide everything for yourself. good luck! here everyone passes the flour of choice))))))

Thanks for such quick answers. I have already studied the whole topic, so I wanted to buy, and the cheapest one is now at a price of 4990 rubles., so I think, is it expensive or not?

Miranda, the author of the topic, took it for such a price, the blender has already been discontinued, so these are leftovers ... will it be cheaper where, a big question

I have already studied the whole topic, so I wanted to buy, and the cheapest one is now at a price of 4990 rubles. , so I think, is it expensive or not?

Expensive...

Expensive...

Sorry. I'll think.

I bought it because of the promotional price, for the full then I would not have taken it, but now I constantly use the mill and do not get enough of it. The leg is still idle, because there is a more powerful Redmond, and took Element to replace him, fearing that soon the old one will hic and there will be nothing to interfere with mayonnaise. But now I have ceased to take care of Redmond, in a large bowl on knives I boldly make dough, minced meat, pâté, and when I finish it, I will buy a separate large chopper. Then the Element will work to its fullest.

now at a price of 4990 rubles. , so I think, is it expensive or not?

there is nothing to think about, of course, it's expensive! To all of us who got something for 2500 - ok, but not more. I also like the mill, it is convenient to make a quick batter for pancakes, for tartlets, and mayonnaise with chocolate paste

I love blender
I don’t know about 5 thousand, although I bought it myself for such a price, but I have irrational expenses when I really wanted to.

Since I have Kenwood, and when I bought a blender, it was Bosch, it was originally an auxiliary tool for small processes. I use a whisk and a stick most actively, stick ice a little less actively or puree a small amount. I practically don't use a mill, I use a Kenwood nozzle. It suits me that he stands at hand on the table top and copes with his tasks.

Thank you so much for the clarification. I used to have bamix (I didn't even have time to enjoy and understand what it is), but I gave it to my sister for my anniversary (she really asked for it) and I bought it at a very good discount, now there are no such discounts. So I'm looking to buy this, at least something similar to him.

And I also like the Element. In the presence of Brown (and a burnt out Kenwood - so I can compare) with pleasure I use a whisk, and an emulsifier, and a leg, and a mill.