Dough sheeters-noodle cutters (model selection, features, reviews)

Peace be with you bakers!

usual moment + salt \ but only sifted -powder practically \ sticks to dead, salt acts as a reinforcement
I mean, before you take a new one, try to glue

🔗
I ordered using this link, left a message with a phone number and they called me back, received it a few days later, the payment was on receipt, I don't remember the price, but not expensive. At this link at the very bottom there is a request to leave a message if you have any questions.
Two scrapers, right and left, are shipped as a set.

Guys!!!
I don’t know what I’ll do yet, but thank you for your help !!!

I mean, before you take a new one, try to glue

I'll try! Thank you))

[Vera]

VeraVera, what's the use of glue, about 500 rubles, two scrapers, the young man discussed everything with me on the phone, sent it to Omsk with a transport company, and you were in Moscow, the delivery cost me about 200 rubles.

Peace be with you bakers!

Elena-

Well, as if from my bell tower, if I didn't manage to fix it myself, I turn to the specialists, my wife arises all the time - well, why are you useful, after all, no boom-boom in this, well, yes, but it won't be worse

normal moment + salt glues to dead

If these parts are made of PE or polypropylene, it won't help. If it's polyformaldehyde, try it!

Peace be with you bakers!

Igor -

I tried to glue a lot of things with such a composition: yes: everything is holding, my daughter's lid is broken, such a heater for curling / curlers - in short, hell knows, I don't use it so it can withstand heating

Hello! Who needs Marcato Design Atlas 150 Color Nero? BU 5 times 400 gr. test. In the box. I will answer all questions by calling Gennady 9154680101.
PS: 4000 RUB

Anti-advertising ... Imperia (maid in itali) with removable double cut. Who and what did with the rolling is unknown! In the house, pests, as well as those who like to roll out the dough, were not found.

I support! I have the same problem, although the machine is titania empire. Both scrapers cracked. The online store where I bought it is allegedly the official representative of this Italian brand. But their service center is something with something, the managers do not know anything, the site has the wrong size of scrapers. I corresponded with them for a very long time, in the end it turned out that they did not have the necessary parts, they could bring them on order, the delivery time was 120 days. I rummaged through the entire Internet, bought these scrapers in another store, as a result, my husband cannot put them in place now. I'm already inclined to buy a new dough sheeter

Horrible! In the spring I bought this dough rolling machine, like I read the topic carefully, I did not see this problem.
I can't complain yet. Works.

She also worked for me for 2 years, loved her very much. Just when it breaks down sooner or later, problems may arise with the replacement of spare parts.

The topic of choice, in my opinion, is full of messages that have nothing to do with the name.
I honestly read, but it turns out I made the wrong choice. Moreover, 2 times. I bought it with a motor that I don't need nafik, but there is no one to blame, they convinced me that the motor is vital. And I asked about the brand, consulted.
I will hope that nothing will crack and burst.

Guys, please poke my nose where the problem of the gears jumping off when the rollers become crooked is described.
And maybe someone has already figured out how to solve this problem forever

[kapnat]

kapnat, Natalya, how about selling a motor that you don't need nafik? And yes, these scrapers also broke, this is a very flimsy part, when transferring the machine, you should not take it, clasping it with your fingers under the bed, I do not know how to call this place correctly.

[kapnat]

kapnat, Natalya, how about selling a motor that you don't need nafik? And yes, these scrapers also broke, this is a very flimsy part, when transferring the machine, you should not take it, clasping it with your fingers under the bed, I do not know how to call this place correctly.

Elena, do you want to buy?

You write to me in a personal, what, how, how much, pl.

[Natalia]

Natalia, TatyanaWHAT are special models of Ampia capricious?
I also bought Ampia not so long ago and I'm soooo happy with it, although the unpretentious Italian made me happy

Natalia, Tatyana, WHAT are the special models of Ampia capricious?
I also bought Ampia not so long ago and I'm soooo happy with it, although the unpretentious Italian made me happy

I have the Empire of Titania. Ampia's scrapers seem to be metal with plastic, so they shouldn't break like my car

I also have the Titania Empire and has been working for 5 years or more, I took it here on the forum in the first joint venture. Nothing's broken, TTT.

Empire Titania and has been operating for 5 years or more

When I was going to get a dough rolling machine, I called one store, they sold two empires, the price for them differed almost twice. I asked what the difference was, they said that China was the cheapest one. It was not possible to distinguish visually, maybe if you know exactly the smallest nuances, and be able to compare, and if you have not seen it before, you cannot tell.

I also bought Ampia not so long ago

Vika, so marcato that the empia is that the atlas in the metal, everything seems to be done both outside and inside. It was the Empire that sinned with plastic gears. When I bought myself a car that year, I also chose for a long time, until I read the entire forum, then I learned that the empire has vulnerabilities. But at first I wanted to take it, in order to save money on the purchase. As a result, I stopped at an atlasmotor (which is still insanely happy, consider semi-automatic production), although I still can't buy spaghetti or reginet for it in a year ((((neither the euro rate, nor the prices in Russia are at all happy

A question for those in the know: I have a Marakato Atlas 180 Roller. No noodle cutter.
Is it possible to buy a noodle cutter for her? I can't find information on the Internet, it varies ..

Atlas 180

Lena, I know only one thing, that there are no attachments for 180 in nature. But the native one for 2 cutters exists. So we conclude that it is still possible to buy a native one. Hypothetically

[Comparison of the rating of the best noodle cutters for dough sheeters MARCATO (Italy), IMPERIA (Italy) with the Chinese version]

When I was going to get a dough rolling machine, I called one store, they sold two empires, the price for them differed almost twice. I asked what the difference was, they said that China was the cheapest one. It was not possible to distinguish visually, maybe if you know exactly the smallest nuances, and be able to compare, and if you have not seen it before, you cannot tell.

A store that sells empires in two price categories would immediately arouse suspicion in me. I have an Italian empire, bought from official representatives.
In general, I really liked this article, where the insides of three rolls are compared
Yeah, I'm not allowed as a beginner to insert links, but if you type in the search Comparison of the rating of the best noodle cutters for dough sheeters MARCATO (Italy), IMPERIA (Italy) with the Chinese version then you can read about the fillings of the dough rollers.

Hello everyone !!! I read the topic up to 200 pages, but decided, nevertheless, to ask a question. I ordered Ampius 150. And it itches that it was necessary to Atlas. Although I do not plan to take additional attachments. What do you think, leave Ampia or, nevertheless, re-order for Atlas?

If no attachments are needed, Ampia is enough. But if you really want to, then of course re-order, otherwise it will be too easy! Just kidding, of course

Svetlana, thank you !!! So I am tormented, I don’t nat ...

[Irina_Zg]

Irina_Zg, Irina, I didn't have Ampia, but I'm happy with Atlas. Especially because it has a motor. I bought additional attachments, 3 pieces, I thought that I would actively use it, but I use Atlas much more often as a dough roller. It all depends on the specific person what he needs. BUT when I buy equipment, I think about the future. See where the soul lies.

I also have an atlas. And I bought nozzles. And now I think that I should have taken an amp and that's enough. Possession warms the soul, and the brain speaks of practicality.

Oh, here and my practicality with the soul will not converge in any way. I will definitely not buy additional attachments. Moreover, that is not much, but cheaper than Ampia Atlas. They will send on the 9th, so I'm toiling. Everyone has Atlases and I like everyone else.

Hello everyone!!! I got my Ampia today! It is something. I cleaned flour and water with the usual dough. Did cool. This is such a beauty - how it rolls, how it cuts - a song, not a unit !!! Thank you all, for reading your reviews I decided to buy Marcato, not China

Friends, good evening! Please tell me on which sites did you order Ampia? Perhaps you know where you can order more profitable? I do not want to stumble upon a fake or other ridiculous situations! Thanks in advance for your answers!

Hello! I bought from the online store from the first page of Marcato. com. I like it. And it's cheaper there

Tell me, please, what is the difference between these two miracles?

Tell me, please, what is the difference between these two miracles?

Also at one time interested in this question. I asked in different stores, everyone claimed that only the color of the pens.
You can call and ask.

🔗

8 800 333-94-84 free within Russia. My sister bought her Atlas Motor from them.

Reply from marcata com ru:
"in the material of the handle, that's all"
"design series - metal handle, classic - black plastic"

Svetlana, thank you !!! So I am tormented, I don’t nat ...

Oh, I didn't suffer. I bought Atlas. Now I suffer - where to store dumplings and manti? It's a pleasure to cook them now.

I don't suffer either. Ampia is just a miracle !!!

I bought from the online store from the first page of Marcato. lump

I also took there, and three years ago, Atlas 150. Everything works fine. My handle is gray, but it's still made of plastic. So the differences are only in design.

Ladies! and if you compare the Atlas and the Empire, what is the winner?
bought a simple, cheap one and was happy!

and if you compare Atlas and Empire

Vika, there seems to be nothing to break in the atlas. There are no plastic roofing felts of gears or couplings, as in the empire, which constantly break, and the motor is also more impressive (on the empire, there is fragile transparent plastic on the mount). the thickness they seem to roll is the same that the atlas is 9, that the empire is 6. When I bought myself a dough sheeter, I read about it about everything, maybe I already don't remember, but for some reason, maybe that's why I took the atlasmotor. And at the expense of pastabake, Teskoma has a similar thing, I took it on ozone, its price is about 500 rubles, but I bought it with thanks points. In general, I think it's not worth it, having 2 dough sheeters, one of which is Italian. But if you really want to and give literally a thousand for 2, maybe it would have grabbed.



As always, I didn't look where you are from. Belgium has no ozone

the bottom of which is Italian.

they are both Italian, just one with a name, the other with a simpler name. with which for some reason I am sorry to part.

they are both Italian,

still, and even more so))) otherwise this is already collecting, although if there is a summer residence, one can go there for permanent residence, the second at home, and the third one can be removed into strategic reserves. But I personally would stop after buying an empire

stopped after buying an empire

Well, I'll stop!

Girls, maybe I'm a failed rogue, but now such a noodle-cutting machine looked at me.
🔗
The rate of use seems to be not very active yet (~ 500 dumplings per year), and then how will it turn out. We are from the USSR, where every gizmo was used in terms of functions in excess of those stated for it.

If anyone has experience with such a device, please respond.

If anyone has experience with such a device, please respond.

at the age of 10 I bought a Chinese woman on a tyrnet of this type, I really wanted a dough sheeter. I didn't buy it from Italy, China - not expensive.
For 6 years, the dough sheeter worked as a Chinese in the rice fields.
I bought another one the year before last, of the same "sort", the first one broke that place on the spinner to the table, which you take when you spin it, the machine itself creaks, but it works.
I hardly use the noodle cutter - the dough sheeter is important to me. But the noodles are quite good. ))
The first has 9 degrees of rolling, the second has 6. There is no difference. never used all 9 degrees. Basically 1- thick, 3-thinner, a little thinner 4-5-6))

I also have such a rogue type, but she is Italian. Sooo and very good! Another Italian woman with the name Empire is somehow heavier and more solid, but in work she is not very different.

about! already three rogues, it's time

Girls, maybe I'm a failed rogue, but now such a noodle-cutting machine looked at me.
🔗
The rate of use seems to be not very active yet (~ 500 dumplings per year), and then how will it turn out. We are from the USSR, where every gizmo was used in terms of functions in excess of those stated for it.

If anyone has experience with such a device, please respond.

Good afternoon, I have this, only the width of the shaft is 180 mm, I bought it online, I also threw questions about it on the forum, no one answered, I will tell you my impressions, a normal car, I bought a gastroragon electric drive for it, I was advised to do this in hemlux it has 7 degrees of rolling, the thickest - 7, the thinnest - 1. I use it mainly as a dough rolling machine, roll out the dough for dumplings, dumplings, made cakes for besparmak, everything turns out fine, I made noodles both thin and wide. On the dumplings it reached a thickness of 3 and cut it into a mug, if you make a thickness of 2 and 1 - well, it will be very thin, the dumplings will boil, so the thickness of 3 suits me perfectly. I agree with noodles - the thinner the dough, the better, I do it on 1. I say right away - I make the dough steep with the addition of races. oil, so it's hard to roll it with your hands, but my gemlukschka does an excellent job, the engine is running, making noise, and I just adjust the dough with my hands and switch the rolling thickness! If you have any questions - ask, everything I know, I will share information.

I have this, only the shaft width is 180 mm, I bought it online

I also had the simplest Chinese, also in online trade and 180 width. I wrote about her overview.

No complaints and still works.