Multicooker-pressure cooker Brand 6051

Will the black pressure cookers have a second silicone ring included?

[Bowls for 6051 Do not put on gas or on the stove.]

I apologize, the question is applied and maybe it has already been raised a hundred times - you can heat up in a bowl on gas (for example, soup) - nothing will happen with the bowl, no one does that?

Bowls for 6051 Do not put on gas or on the stove.

Hurrah! On Tuesday my slow cooker came to me !!! Already tested
On Tuesday I cooked millet porridge with frozen pumpkin in it. It turned out very tasty, but I didn't take a photo - we ate it right away
Yesterday I made a lazy cabbage roll, cabbage + onion + minced meat. On the "Extinguishing" mode, pressure 50, 12 minutes. It turned out delicious.
Today I cooked the simplest cabbage soup, added the recipe with the photo to the recipes.
I have no complaints about the multicooker. I have no chemical smell, I did not boil water with lemon. Condensation does not spill onto the table.
Thanks to everyone who helped me decide on the model !!!

Congratulations on your purchase! I think you will not regret your choice. I had it for about a month, at first there were questions about operation, but when they got used to it, only positive emotions

Thank you very much, I am sure I will not regret it !!! And I tried only 3% of the possibilities ...

Dear forum users!
I still toil with the choice between Steba and Brand 6051, I'm already tired of myself. Here ...
These are the questions I have:
can the heating be turned off in advance?
how well, quickly, does not boil away, does not burn - is milk porridge prepared immediately promptly and on a timer?
like baking, how is the time in comparison with other cartoons and cartoons especially? Are the casseroles interesting to me the most?
How do you like yogurt?
I am very interested in speed, I still realized that it is important for me: quickly and as much as possible without my participation. I would like to try soups, milk porridge, meat dishes, yogurt, but this is not the main thing, maybe no one will eat with us.

I would like to hear answers, especially in comparison with other models, from experienced pros, that something is better in Brandik, something is better in another model.
If someone else, besides Tanyulya, whom I probably already shamelessly, completely and shamelessly tortured, has both Shteba and Brand 6051, please respond, I will not torture much, here are just a few questions.
Thank you so much in advance for your answers and attention.

Elena, the heating can be turned off.
Tanyulya already wrote to you very well about milk porridge - you can absolutely trust her opinion.
Yogurt cooks well, but it is better to purchase a special yogurt maker - in any multi-pressure cooker, the smell from previously cooked food will be present.
Bakery products? Also very good.
I have no staffs, but there is a lacquer and a brand 6050.
P.S. Buying a saucepan is not at all a reason to toil. Buy the one to which you are more favored. If you don't like it, buy another one.

Yogurt cooks well, but it is better to purchase a special yogurt maker - in any multi-pressure cooker, the smell from previously cooked food will be present.

Yogurt can be made in jars, then there will be no smell. I make yoghurt in jars, I absolutely don't need a yoghurt maker!

P.S. Buying a saucepan is not at all a reason to toil. Buy the one to which you are more favored. If you don't like it, buy another one.

So I wrote about this, if you like it, then it will be necessary to take the second third, but not to the court

Yogurt can be made in jars, then there will be no smell. I make yoghurt in jars, I absolutely don't need a yoghurt maker!

I do it in jars, I gave the yogurt maker to my mom.

[GIRLS! I made up my mind! On Brand 6051!]

GIRLS! I made up my mind! On Brand 6051!
Bribed me:

• delicious porridge according to reviews
  bakery products
  the ability to turn off the heating in advance.

Confused:

• dripping condensation
  honeycomb bottom of the bowl, which is difficult to clean
  the bowl itself, the coating of which someone has deteriorated

Girls, when I was working, I had a noise from the valve, as if air was coming out, before that there was no such thing, what is it?

Please contact our SC, they will try to help you.
Please call the phone number below and the master will definitely tell you what to do and whether you need to take the multicooker for repair.
Phone SC (495) 662-59-97 ext 117
We are located at: Moscow, Egorievsky proezd, 2.
Working hours: Monday - Friday, from 9 to 20 hours, Saturday from 10 to 18 hours.
Driving directions and a description of how to get there, you can always look at the official Brand website.

Maybe they just didn’t listen before. At me, too, during cooking, the valve periodically hisses - this is excess (according to the set program) pressure being released. For example, I still cannot understand how the pressure cooker itself releases excess pressure - well, that is, I examined the valve device - there are pure mechanics - but I don't understand the process itself - that is, pressure has accumulated according to the program, for example 20, then the boiling continues and the pressure needs to be relieved - how the brain of a pressure cooker gives the command to a purely mechanical valve I don't understand .........

AAA while writing has come - due to the game of temperatures ...!

That is, it may hiss, is this normal?
I cannot contact the SC in Moscow, I am in Voronezh. And I don't want to waste time if this is the norm.

Fine.

Well, how to understand the norm - you need to see and hear it with your own eyes. Alternatively, I offered a description of a possible situation. You say - hisses - but how are the programs going, is the pressure gaining, how is it kept?

In general, I will say this - if the pressure cooker had not sizzled, it would have exploded

The members of the forum are actually right, the pressure cooker releases the excess pressure as needed and that the pressure is controlled by the temperature.
It should not float all the time, periodic bleeding during cooking is the norm.
The main thing to look at is whether the product is ready, whether it escaped during the cooking process, whether the steam valve is properly closed, whether pressure is building up, whether there are other technical problems during cooking.
For all questions, you can always call us at our expense and tell us about your difficulties when working with equipment or consult with a specialist about cooking: 8-800-333-12-52 (call from all regions of Russia is free).
or directly to the Research and Development Department (495) 662-59-97, d 115
We will definitely help you.

Confused:

• 
  honeycomb bottom of the bowl, which is difficult to clean
  the bowl itself, the coating of which someone has deteriorated

My cup has deteriorated, perhaps this is a single marriage. They promised to replace it. Now I cook milk porridge in a saucepan from Panasonic. Fitted perfectly. Condensation does not drip. The rest of the pressure cooker is super.

Yes, by reading the answers from the Brand men. I sob - I have a little cartoon binaton, I damaged my cup during the trip, I want to buy a new one - I can't find these binaton guys ...

I don’t understand why someone doesn’t have condensation dripping, someone is dripping, but it’s running straight for me?
And also, representatives of Brand, tell me, please, is it okay that I clean the bowl with a HARD BRUSH (not a sponge)?

I don’t understand why someone doesn’t have condensation dripping, someone is dripping, but it’s running straight for me?
And also, representatives of Brand, tell me, please, is it okay that I clean the bowl with a HARD BRUSH (not a sponge)?

The amount of condensate depends on the amount of liquid in the products, on the additional liquid you pour, on the mode you have chosen and on the pressure.
There should be condensation. The lid 6051 does not have an additional heating element as in the multicooker 37500, 37502, 502, so the condensate should collect on the lid, then, when opened, it flows down to the inner white case, then into the condensate receiver.

We do not recommend cleaning the ceramic bowl with hard brushes, although the coating is ceramic, it requires careful maintenance.

Girls!
And do many already have a second bowl? What kind of coverage does it have?

I want to order Brandik 6051, what should I order for her right away? Just a cup yet? The ring hasn't come out yet.
By the way, I read here that a bowl from Panasonic fits.
What do you think? It seems that they are very, very praised for their durability and wear resistance.

What kind of coverage does it have?

The same ceramic.

I have 2 questions:
1. Does this saucepan fit a bowl from 37502?
2. Will the black version appear by the New Year? Thank you.

There should be condensation. The lid 6051 does not have an additional heating element like the multicooker 37500, 37502, 502, so the condensate should collect on the lid, then, when opened, it flows down to the inner white case, then into the condensate receiver.
(Failed to quote)
This is in theory, and I read about it, but in practice it is completely different. Part of the condensate flows down to the inner case, it does not reach the drip tray, after opening the lid, I tilt the SV. What bothers me most is that water is running onto the table and down the body from the pressure regulator.

after opening the lid, I cant st. What bothers me most is that water is running onto the table and down the body from the pressure regulator.

Why tilt the CB? Isn't it easier to just take a rag and blot the liquid, and at the same time wipe all the cracks in the body after cooking? Honestly, I read and am surprised at the difficulties with condensation. I don't pay attention to him at all and he does not give me any difficulties.

I have 2 questions:
1. Does this saucepan fit a bowl from 37502?
2. Will the black version appear by the New Year? Thank you.

Good day.
1. The 6051 multicooker pressure cooker does not fit a bowl from 502 or 37502.
2. We hope that the multicooker pressure cooker 6051 in black will have time to come to NG.
We will definitely inform about admission.

What bothers me most is that water is running onto the table and down the body from the pressure regulator.

There should be a little water flowing out of the pressure regulator because:

1. When the pressure cooker is turned on before the main pressure is reached, steam is released.
2. Periodically, excess pressure is automatically vented, and steam is also released.
3. After cooking and manual depressurization, an INTENSIVE STEAM with water droplets is emitted.
4. Escaping water-steam is collected in the casting to collect condensate from the pressure regulator.

Therefore, when the lid is opened, the resulting water from the casting of the container will drain.

[!!! Dear Brand representatives, experts !!!]

ORDERED !!! At last!!!
They should bring it tomorrow evening.
I ordered myself and my mother's friend right away. So as many as 2 pieces. Brandika 6051, 2 additional bowls and more additional silicone rings.
!!! Dear Brand representatives, experts !!!

I seem to have read that the rings have not yet come out, but they told me in the multivarka store that they have them.
It is not true? Could it be for 6050? and they do not fit 6051?
Really looking forward to the answer!!!
They should bring me everything tomorrow afternoon. To take these rings or not?

[!!! Dear Brand representatives, experts !!!]

!!! Dear Brand representatives, experts !!!

I seem to have read that the rings have not yet come out, but they told me at the multivarka store that they have them.
It is not true? Could it be for 6050? and they do not fit 6051?
Really looking forward to the answer!!!
They should bring me everything tomorrow afternoon. To take these rings or not?

We do not know what is in stock at the multivarka store, you better contact the store personally and clarify.
Rings for 6051 are really out of stock.
Silicone ring from 6050 does not fit to 6051, they have a slightly different inner puzzle.

And people write that rings from 6050 to 6051 are suitable.
LUDIIII! Respond someone else.
Official representatives! How can it be that experts say from experience that they are suitable?
Also, the answer is - you do not have rings, which means that you simply did not bring them, while others could have brought them? or what is this some kind of catch?

Where can I find the official list of stores where you can safely order?

🔗

You can see the list of our partners:
🔗

And people write that rings from 6050 to 6051 are suitable.
LUDIIII! Respond someone else.
Official representatives! How can it be that experts say from experience that they are suitable?
Also, the answer is - you do not have rings, which means that you simply did not bring them, while others could have brought them? or what is this some kind of catch?

Good morning.
When using a ring from 6050 in a 6051 pressure cooker, we cannot guarantee you full compatibility.
I repeat, they have a slightly different internal connector.
In the 6050 pressure cooker, the silicone ring is put on a removable plate, so the ring has a U-shaped connector. But 6050 can be matched with a ring from 6051 and 6060, because it is put on a removable plate and the design of the plate firmly holds the silicone ring.
In the 6051 pressure cooker, the ring is put on directly the lid itself, the inner arc, so the inner connector of the ring is designed simply for an arc and looks like a V. When such a ring is put on an arc, it has no move. If you put a silicone ring from 6050 or 6060 on the 6051, there is little movement and the ring may fall out during use and when opening the lid.
Therefore, according to all that has been said, we do not recommend replacing silicone rings from 6060 or 6050 in 6051.
6051 new model The delivery of rings is just awaiting.

According to my feeling in 6051 the ring on the arc has a move. Not very tight. And if it immediately after the program runs, it generally slides off the arc when the lid is opened.

By the way, the ring from 6050 sits much tighter than the original one.

Steamed hedgehogs:
🔗
🔗

So really, from experience in use, you can safely use a ring from 6050 to 6051? and nothing falls?

Why tilt the CB? Isn't it easier to just take a rag and blot the liquid, and at the same time wipe all the cracks in the body after cooking? Honestly, I read and am surprised at the difficulties with condensation. I don't pay attention to him at all and he does not give me any difficulties.

I cant it, because sometimes there is a lot of water in the groove, and somehow I don't want to blot the boiling water at all, there were a couple of attempts ... Therefore, everything that can escape into the drip tray, let it escape, and I'll wipe the rest.

Hello, I have been dreaming about a pressure cooker for 2 months and, finally, after reading both topics (Brand 6051 multicooker-pressure cooker and test) I decided to buy Brand 6051
Although I haven't even ordered it yet, the question has already arisen: which steamer (mounted) is suitable for this model ??? I would like to be able to steam something meat while cooking, for example, a side dish.Although I still don’t know if it will come in handy, you can probably put a double boiler on the side dish, which is included in the kit ... I have never used any cartoons or a pressure cooker But I hope that Brand 6051 will be in great demand ...

[grishkoff,]

grishkoff, in this type of pressure cooker DO NOT USE A MOUNTED STEAMER, only the supplied stand steamer. The overhead steamer may prevent the lid from being sealed.

[grishkoff,]

grishkoff, in this type of pressure cooker DO NOT USE A MOUNTED STEAMER, only the supplied stand steamer. The overhead steamer may prevent the lid from being sealed.

Ksyusha, And if not from the kit, but just a silicone folding one? And the 6060 model? I'm going to try ...

The main word there is "Hinged".

[Tatyana]

Tatyana, just a silicone folding on the bottom is possible. The main thing is not to hang it on the side. For example, I would not even venture to try, although from 37501 it seems to be suitable.

[grishkoff,]

grishkoff, in this type of pressure cooker DO NOT USE A MOUNTED STEAMER, only the supplied stand steamer. The overhead steamer may prevent the lid from being sealed.

Exactly, thanks, as soon as I read it, I immediately realized that it was not

Girls, so please explain with additional rings!
I read here that the ring from 6050 fits to 6051 and sits even better, or someone writes that there is no difference between them in essence, and they swap them between these two models. Yu
Representatives say that the ring from 6050 to 6051 does not fit in any way, there are different edges, grooves, for different fastening systems.
Respond, tell me, who tried to wear a ring from 6050 to 6051? Does it fit well? does not fly off during cooking or opening the lid?

My cup has deteriorated, perhaps this is a single marriage. They promised to replace it. Now I cook milk porridge in a saucepan from Panasonic. Fitted perfectly. Condensation does not drip. The rest of the pressure cooker is super.

I tried a bowl from Panasonic, it was inserted, the lid closed, but the lock does not allow to turn to close. Is it the same for you? And I was already so dreaming, I really like the pan from the Panasonic.

I tried a bowl from Panasonic, it was inserted, the lid closed, but the lock does not allow to turn to close. Is it the same for you? And I was already so dreaming, I really like the pan from the Panasonic.

My lock is closing. I cook in it. Bowl original from the multicooker. From the brand, the bowl fits into Panasonic, sometimes I change them.

Why can't I turn the lid? The bowl is also original, Panasonic is the last round, the one that is made of stainless steel with express and compote modes.
I went to shove some more.

I put two bowls side by side, with the naked eye I can see that the rim of the Panasonic is about 2mm higher and it is kind of convex-wrapped, and the brandik has a flat rim. Maybe in this model I have a slightly different bowl, although when I was interested in a spare one, they said that 4.5 l it alone goes to all 18 models. I was just upset. But I will not use superviolence, I feel that it will jam.

I put two bowls side by side, with the naked eye I can see that the rim of the Panasonic is about 2mm higher and it is kind of convex-wrapped, and the brandik has a flat rim. Maybe in this model I have a slightly different bowl, although when I was interested in a spare one, they said that 4.5 l it alone goes to all 18 models. I was just upset. But I will not use superviolence, I feel that it will jam.

Good day.
Spare bowls for 6051 are on sale. We recommend that you buy an original bowl for 6051.
🔗... brand. рф / catalog / 47 / aksessuary-dlya-multivarok.html? page = 2

[grishkoff,]

Hello, I have been dreaming about a pressure cooker for 2 months and, finally, after reading both topics (Brand 6051 multicooker-pressure cooker and test) I decided to buy Brand 6051
Although I haven't even ordered it yet, the question has already arisen: which steamer (mounted) is suitable for this model ??? I would like to be able to steam something meat while cooking, for example, a side dish.Although I still don’t know if it will come in handy, you can probably put a double boiler on the side dish, which is included in the kit ... I have never used any cartoons or a pressure cooker But I hope that Brand 6051 will be in great demand ...

Forum users answered correctly:

grishkoff, in this type of pressure cooker DO NOT USE A MOUNTED STEAMER, only the supplied stand steamer. The overhead steamer may prevent the lid from being sealed.

Therefore, only one steamer is included in the complete set for 6051 - the lower one.

Why can't I turn the lid? The bowl is also original, Panasonic is the last round, the one that is made of stainless steel with express and compote modes.
I went to shove some more.

If the clasp does not close, the bowl does not fit exactly.
If non-original and not recommended accessories are used, breakdown is possible, in such cases, the MANUFACTURER'S WARRANTY VOID.
We recommend that you purchase an original bowl for 6051
🔗... brand. рф / viewitem / 251 / chasha-dlya-multivarki-6051.html

Girls, please tell me exactly which multicooker rings are suitable for so that you can easily buy? otherwise you don't want to eat cottage cheese with cabbage flavor (((

Good day.
Spare bowls for 6051 are on sale. We recommend that you buy an original bowl for 6051.
🔗... brand. рф / catalog / 47 / aksessuary-dlya-multivarok.html? page = 2

Thank you very much! But this is not the case in Ukraine and will not happen in the near future. Let's dream for now.I don't even have a coupon filled out, because as I understand, we don't have a warranty service. So it remains to pray that it will not break. I have two cuckoos working without a guarantee.

Girls, does your bowl smell after cooking? Yesterday I cooked the first dish for the first time - potatoes. The bowl now smells of something incomprehensible. Cuckoos never smell of anything, you can immediately put yogurt after meat with garlic. And condensation is something. I put it on a plate on the stove under the hood, it was flooded so that I had to wash the stove too. My husband looked at all this and scolded me for this purchase.

My smell is also not clear what. It doesn't seem to affect baking, it was somehow the porridge, too, smelled of cabbage once, then it seemed normal, but when the cottage cheese was made, it was something with something. I cooked a lemon before that, it did not help. The ring, by the way, is also quite smelling, I think that is why the cabbage cottage cheese turned out. We also do not have a service center

And I ordered. Was honored finally: crazy: All any problems interfered.
Only that's interesting. I ordered it on Monday, but there is no letter with the parcel number yet ...

Good day.
An order was received from you on October 21, 2013 at 14 20, you made the payment at 14 21. Through the banking system, the payment gets to us no earlier than 1 - 2 days, it all depends on the bank and on the time of the transaction.

Further, according to our conditions, indicated on our website: 🔗... brand. рф / page / 7 / dostavka_i_oplata.html
"Sending is made after receiving an advance payment to the settlement account of the company" Brand "within 3-5 working days."
Payment has been received today, the order will be sent to you in accordance with the internal regulations and the number of the departure must be provided, please wait a little.

Today you have already asked about your order in a personal at 11 55, you were immediately informed as quickly as possible about the status of your order at 12 34.
We are here for you.

Thank you very much for your answer and patience. I will wait for the parcel

[Ksyushk @ -Plushk @]

Can you please tell me what is the temperature in the yogurt mode? I want to try to make kefir in this mode, but there you need a temperature of no more than 35 degrees.

On yogurt, the temperature is kept at about 38-40 * C. It will be hot for kefir. Better to bet on Manual.

I haven't tried the manual mode yet, I hope you can set 35 degrees there ...

Can. Take-off run from 25 to 130 in 5 degree increments.

Ksyushk @ -Plushk @, help, figure it out. Confused. If I only need one step, after programming the first step, do I not need to press the steps button? Or do you need to pass them somehow?

Everything is correct. If only one stage is needed, then after setting the temperature and time at the first stage, immediately press the START button.

Ksyushk @ -Plushk @, Thank you!

Raspberries, to your health! For tasty and healthy kefir!