Technical assistance and spare parts for multicooker Panasonic

Hello! I do not know where to ask such questions, redirect if that. I have a sick Panasonic cartoon, I don't know how old she is. Everything was fine until recently. Porridge began to run away on the programs Plov and Grechka. I already washed the cover and the valve, and lubricated it with oil. Then the thought arose that something had happened to the programs and the temperature on them became higher than it was before, the porridge begins to boil strongly and therefore runs away. The fountain hits straight through the valve, everything is splattered around. I decided to try to put the porridge in the Stew mode. And everything is fine! Does not run away on Extinguishing! What can be wrong?
I see that the heating element seems to have darkened or something, it’s not dirt, I periodically tried to wipe it, but then I decided that this is a natural process. But if the heating element itself overheats, then the porridge would run away on other programs, but this is not so ... What to do?

My cartoon decided to rebel, turned on the Steam cooking mode for 30 minutes, and after a few minutes it turned off, turned on the same thing again, switched to Extinguishing, did not want to turn on at all, after a while it worked for an hour. This is the first failure in almost 10 years of operation. I read the whole topic, I was especially surprised by the cases of full multi-washing in the shower, once I had poured fat without a saucepan, I was scared very much, but I wiped everything and was fine. I found two such cases like mine in the topic, unplugged it from the outlet, rested with me for two days, made a pie and cooked buckwheat today, everything is fine. Glory to Panasonic!

[Svetlana]

Svetlana,

Help is needed! It’s quite a problem now with the bowls for the first version of the big Panasik, there are no relatives anywhere, no brand’s. The question is - does any one come from Redmond?
On the site they have in the description either 5l or 4l, and Panas is 4.5l ...

I am sharing information about ordering bowls at NEK LLC. I liked it very much - both the work of the company (communication with the manager, sending and receiving the parcel in 2 days), and the product itself.
I ordered Anthracite 4.5 liters and Proff G3 4.5 liters, got up like family, the coating looks good. The only thing is that there is no graduation, but it should not be on them.
Here is the link to the site:

🔗

I have a Panasonic DR-DY101 multicooker. It suits everyone, but the bowl has deteriorated. Now I can't buy it anywhere. I read that the bowl from the Panasonic SR-DF101 multicooker is suitable. But there are no cups from her either. Maybe someone knows if this bowl can be replaced with a bowl from some other multicooker? Maybe bowls from other brands are suitable?
Another problem is that in my city they hardly sell bowls, otherwise I would go to the store with a multicooker and try on bowls there. But there is even nowhere to go, and on the Internet how to order, if you do not know whether it will fit or not.
If someone has used bowls of some other companies in such multicooker, please write, I will be very grateful!

[LudMila]

LudMila, hello, please tell us how the new saucepans behave in business? Is there a difference and why you chose them? Thanks in advance!

[Laniko]

Laniko, Larissa, I haven't started to cook in them yet, I still use the old one. I bought it and calmed down. I chose according to the description of properties on the site, these were the ones I liked. I think that there won't be much difference in business.))

[LudMila]

LudMila, thanks for the answer, I also shoveled the site and liked yours, now I will look for options for bringing them to Minsk.

Peace be with you bakers!

here in NEC I bought for the eighteenth

[shade]

shade, well, what are your impressions?

This is relevant to me too !!! What is the cup and what is it called?

Peace be with you bakers!

Guys--

This particular - very, very,
I use the cartoon with this bowl in all positions, except for milk porridge, everything pops up at once

There are different options, and probably for all multicooker, you need to choose the size they have, and then the coating

I have a bowl with Proff G-3 coating (third generation) 4.5L.
The coating of Whitford concern Whitford Quantanium "Kvantanium" is used. The thickness of the coating is 35 micrometers, the non-stick properties are 8 points out of 10.

Quantanium is a 3-layer coating from Whitford that is reinforced with small particulate matter located in the lower and middle layers of the coating. QuanTanium uses titanium particles as a reinforcement. It's also worth noting that the QuanTanium coating allows for non-sharp metal accessories.

🔗

[Anatoly]

Anatoly, Thank you!!! Didn't expect so quickly !!! Why don't you use it for porridge? And then my porridge is regularly prepared in Panasika. I also need a saucepan for cereals

[shade]

shade, we can't buy this in Minsk ... I also looked after two there. Are there any traces of the shoulder blades?

Peace be with you bakers!
Well, Duc is the same not in Moscow, order - they will deliver

Girls, boys, help buy a bowl

Ol, what happened to your family?

The bottom bubbled up ...

Peace be with you bakers!

Take in NEC, in fact, we have been using the quality for a long time and there is no hint of any damage, but we use it quite tightly

[Anatoly]

Anatoly, please send me there ...

Peace be with you bakers!
my photo and name are more often higher, and the address is ----

🔗

Ol, restore the bowl. They are restoring in St. Petersburg, nafik you that neck.

[Anatoly]

Anatoly, thank you very much!!

They are being restored in St. Petersburg,

And where, do you accidentally know ?? I am not myself, really, but a good man ...

Peace be with you bakers!

Their bowls are heavier than relatives from Panas, and I think the restoration by spraying will not come out poorly for the price

1000 rubles up to 5 liters.
🔗

Peace be with you bakers!

This is on the one hand, but on the two 1800, and in the neck double-sided 2070 rubles, and note the new,

And again - I have been using it tightly for 2 years, not a single reason for excitement

I was not even too lazy to remove

Why then from both sides? And not to send it anywhere, brought the bowl to the shopping center and then took it away. I have a cover for a year, but more for a Chinese pressure cooker, the cover is gorgeous. And there are no bowls for my pressure cooker, if cho. Moreover, the new il is old, I cook in it, and not count the age.

Peace be with you bakers!

so the thinner the faster it burns out, or do you think that the bottom of the bowls just bubbles?

And there is no need to deliver it anywhere, I ordered it on the grid and took it at the nearest point

And the old one could be hit somewhere, dented, scratched from the outside, and you cover it inside, so the new one is new

I gave thanks to everyone, let her decide for herself ...