Kenwood kitchen machine: working with attachments

[Marinuly]

Valeria bought it on Avito. Does it matter?

Marinuly, for the exchange-return, the check matters, but for the examination I do not know - on the one hand, there is a rare phenomenon (the cup cracked) in their product, and on the other hand, there is no receipt and the examination can only be carried out for money. VRad decided to renovate houses, we will wait for the results.

[Peter Push]

took for examination

This is a dead end road. Even if we assume that there were cracks (and a receipt), it would be possible to return it a couple of days after the purchase. And now it is already impossible to prove that I did not drop her, did not hit anyone on the head, etc.




Peter Push, I will report. You just need to get cold welding. I’m going to snow-covered Moscow, I don’t know where. It is very bad to live without stalls on the street.

[VRad]

VRad, I sincerely sympathize! While I'm driving the car on test-creams, my hands did not reach the processor. Now I think if I will ruin Kesha with my experiments. I make noodle dough in it, the output is 1,200. And he kneads it at me for a total of 20 minutes, won't ruin it?

[LydiaVera]

LydiaVera, happy Birthday!
Do not ruin.

No, well, of course, you can, if you twist the tight dough to the maximum in speed. Then the car jumps up and falls off the table into the abyss. Or if you hit with a sledgehammer.

Good evening, I also had problems with the food processor.
True, I had it in a set with a kitchen machine, model 9060.
After use, I could not unscrew the drive from the bowl and my husband could not. I decided to take it to the service center, they could not unscrew it either, they said to leave it with them.
A week later, she took the processor, changed it to a new bowl, the old bowl cracked when they tried to unscrew it from the drive.

[Miranda]

Miranda, Thank you! The dough is tight, but I don't go further first.
Well, I'm sad about these stories with bowls and service centers. These centers are far from me, you can't turn off the bowls, if that.

[Asya K]

Asya K, it is difficult to remove the bowl from the drive by hand, and it is not always possible to unscrew the knife from the blender by hand.

It's easier to use the machine as a lever. Then very, very easy.

As soon as we did not try to unscrew it and also tried to use the car as a lever.
The service center said that it twisted too much, although it twisted as usual

Can you please tell me what is the confusion with the nozzles for the KVC3100S chef?
Or is it some kind of wrong chef (maybe he counts as chef sense?)? He has nozzles for a low speed socket - hexagons like .. Must be a KAX series ...
And on the Kenwood website, there is an AT series everywhere ..

[Miranda]

Miranda , please tell me how to disconnect the plastic part of the cube cutter from the metal gear? For now, I just wash it gently so that water does not get inside.

[kristi_l2002]

kristi_l2002, low speed all with hexagons, the only question is which ice cream maker fits. AT or KAB

[kristi_l2002]

kristi_l2002, low speed all with hexagons, the only question is which ice cream maker fits. AT or KAB

How is it all? : girl-q: And why, then, is it written on the kenwood website, for example, for KAX950, which is for some machines via an adapter?

[kristi_l2002]

kristi_l2002, this is for old cars with an adapter.

Aaaaaa! )))
And then what is the difference between the AT 950 and KAX950ME meat grinders, for example?

And then what is the difference between the AT 950 and KAX950ME meat grinders, for example?

The AT 950 (and all ATs) fit perfectly into a new socket via an adapter, this is how I use it, no problem. There were simply no attachments for the new, only AT (both a meat grinder and a shredder) were sold, and an adapter (adapter) was attached to the combine. And KABy - for a new socket without an adapter, and if the socket is old, then an adapter is needed, but another one, I think. It seems so.

The AT 950 (and all ATs) fit perfectly into a new socket via an adapter, this is how I use it, no problem. There were simply no attachments for the new, only AT (both a meat grinder and a shredder) were sold, and an adapter (adapter) was attached to the combine.And KABy - for a new socket without an adapter, and if the socket is old, then an adapter is needed, but another one, I think. It seems so.

Thank you )

Can you please tell me how to disconnect the plastic part of the cube cutter attachment from the metal gear?

I also use the car as a lever.
Without removing the gearbox from the machine, I unscrew the plastic piece.

And then what is the difference between the AT 950 and KAX950ME meat grinders, for example?

Only the mount is different.
Auger, knife, grates, nozzle size are the same.

An adapter is needed only for a low-speed socket, all nozzles are suitable for a high-speed socket, the names can be with AT, For example, AT320 mini chopper.

Well, that's it, now I have only one Wishlist - sieve 930.
I received a parcel today with various things, including Kenwood's.

Spatula in such a package, dear mother - 40cm. in length!
Behind in many languages ​​(including Russian) it is written that for high temperatures and in brackets - 130 degrees. But in the new car, 180 and no one seemed to complain. It’s strange. White spatula, yes, it is not for high temperatures, someone even melted.

There are also adapters, both options just in case. Now I will suffer to take a dough rolling machine while the promotion is in the Globe or I do not need it.

Another add. cone 2x2mm. for the spiralizer.

Well, the old Wishlist - add. bowls At first, the white ones were bought, and while they waited for a cone to order, they also turned out to be gray. So I also bought a metal one, while there was a confusion with the price. Now I have extra. bowls, at least open a store

By weight 5g gray. harder, and the rest seems to be the same. There is no time to compare in more detail today - you need to cook dinner, bread in proofing, tomorrow already. And I have not yet decided how much and what color I will keep for myself.

[Miranda]

Miranda, Congratulations!!! Use it for a long time and with joy!

And yesterday I decided to skip the vegetable cutter through the nozzle. In it, such a pusher is uncomfortable, made of the same plastic as the container itself, where vegetables are cut, and it constantly touches its walls. And in the pusher there is a measuring cup for ml. I honestly did not understand at the beginning, why is it needed? She took the pusher and removed it and began to correct the cabbage with this measuring stump. Aha! And the glass was hooked ((whole, but now crumpled.

Today my son showed a moment from the TV series Kitchen, where our machine is removed)) the one with induction

[Miranda]

MirandaWhat a cool review on the spiral cutter! Thank you!!! It was as if I found myself here at the Bread Maker, my eyes seemed to have become larger)) So many new and interesting things)) And what kind of people are kind and sympathetic here.

[Tatiana mom]

Tatiana mom, Now I figured out why there is a glass in the pusher? To chop carrots or celery into even pieces.

[Tatiana mom]

Tatiana mom, like everywhere, there are different people here too

[Tatiana mom]

Tatiana mom, Thank you

Darkusha, I very much agree.

[Miranda]

Miranda... thanks for the great spiralizer review. It looks very tempting.
Now I also think about how I could automate such cutting.
But there are too many types of them on the market. Hard to choose. Or really, buy a nozzle already?
I'm doing it manually for now. I really like zucchini pasta (zoodles). I have such a contraption. very high quality, but the joints do not allow for frequent use.
🔗

[Tatiana mom]

Tatiana mom, Now I figured out why there is a glass in the pusher? To chop carrots or celery into even pieces.

Well, thank you! I probably thought for small things, for example, chocolate, nuts) for this attachment, the video instructions should have been watched at the beginning. There were no problems with the rest of the attachments, everything was clear to the touch.

[Tatiana mom]

Tatiana mom, your mail is full.

[Miranda]

Help! I can't install the KENWOOD KAV957PL ice cream attachment on the Cooking Chef 9060. I install everything according to the instructions, but I just can't close the mixer head! What's the trick? The instructions say that the nozzle for the Chef XL. I bought at cookingchef together with Kesha.

Was on Tuesday at a master class.
They showed how this ice cream maker is put on at 9060, it is necessary to cut off the upper ledge from the hindered and a little more along the entire plane. And you can put it on, the casing will close and everything will work. If someone takes a picture of the mixer, I will draw how to cut it down. I do not understand why they give everyone different information. And I found out quite by accident, because I climbed everywhere and asked everything.

By the way, those who come to the master class when buying a car and 3 nozzles are given 2 nozzles as a gift.

Miranda, while you were still waiting for the cup, you promised to sell me the cup as soon as it arrives, I look forward to when you choose which one you will keep for yourself, another one I will buy. I advise you to go to MK on Tuesday if time permits, they roll the dough there, or maybe my review below on the dough sheeter can help you

Today or one of these days I will go to the Globe in New Riga for additional attachments
I really liked the rolling out on Kesha, new compared to my atlas with a motor.
- works 2 times quieter
- the nozzle is approximately at the level of the chest, it is unrealistic to pick up the dough with both hands, but I am tall
- different speeds near the machine itself and you can, if dexterous, roll very quickly, maybe I will sell an atlas, you need to figure out what is the difference between the cutters
- very compact, ideal storage, small convenient rectangle

Was on Tuesday at a master class.

What else was interesting there?

PS wrote you a message.

What else was interesting there?

I was interested to see the car, touch, try the buttons, see how the menu works, evaluate the dimensions, look at the attachments, I was shocked by the size of the attachments
Prepared Capelacce with duck in a creamy cheese sauce and Pavlova's dessert. I didn't like the food)).
Prepared a Swiss meringue, strange that on a manual program, sent to the oven for 1 hour.
They put duck meat, pumpkin, celery stalks, onions in a bowl, and she cooks and interferes with it, no videos convey the magic of this process, I am like an unspoiled child in wild delight.
Then they quickly kneaded the dough and rolled it out.
We never do this at home, the dough is not plastic. But I really wanted to test the rolling, I was impressed, it was very convenient for me.
The master class itself cannot be called client-oriented, but I visited them for work quite a few and it is a pity that this is so.

The master class itself cannot be called client-oriented

And why? Little is said about the possibilities? Do not explain clearly?

PS tomorrow we'll go to the Globe together and chat, of course
but maybe someone else is interested.

Prepared Swiss meringue, strange that on the manual program,

Maybe they are still afraid that the automatic will not work?)) I wrote that when I was at a similar master class, such an embarrassment happened.
But then she cooked at home herself, this program works fine!

And why? Little is said about the possibilities?

It is difficult to answer this question while remaining politically correct :).
I would like to see such a car in a store with a good, one-on-one seller who knows the car up and down, and only then I would go to MK.
There was no drive, maybe this MK at the end of the working day has such an effect, or there were too many people.
It seemed to me a very strange composition of participants, as if a small part went to see the car in order to make a final decision or they have previous models, but want to assess whether it is worth changing, the other part as if they were lured at a nearby tram stop to be here for extras, people did not those who knew basic things not only about Kenwood, but about cooking in general, piled up very quickly at the end.
Everything is somehow chaotic and a little crumpled. The feeling that something is being kept silent, they are doing the meringue why not on an automatic program, I didn’t want to butt and muddy the waters, so I didn’t say anything.

Good day, everyone, can you please tell me? KENWOOD Nozzle For cutting into cubes KAX 400 will fit the Kenwood KVL-60 Kitchen Machine?

[Helen1]

can you please tell me whether the KENWOOD Dicing Attachment KAX 400 will fit the Kenwood KVL-60 Kitchen Machine?

Helen1, Kenwood KAX 400 PL nozzle will fit without adapter for KVL series KM.

[Peter Push]

Peter Push, Thank you!

Good day! Can you please tell me if it is possible on any disc to grate carrots for carrots in Korean, with such a thin straw? I have a harvester attachment and a grater 340 from the grater. I'm at the dacha now, and I took Kesha to the apartment, you can't check it. And then I realized that I needed to process a lot of carrots

[zvezda]

zvezda, do you often use a sweeper? I have tried it only three times. Very good for marinade for fish, not entirely clear with risotto and completely unsuccessful with sauce. I quickly changed it to flexi.
I am asking in relation to animegravitation questions in an adjacent thread.
Did you (the sweeper) regulate it?




Found a recipe that can be included in the Recipes topic using ...
https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=469045.0
Dear moderators! At your discretion

[Prank]

We went today with Prank to Globus in New Riga, there were heaps of nozzles. We bought nozzles and other things as much as two carts
I sent more parcels with attachments to cities without a Globe.

If someone else needs (who does not have a store) - Welkam.
There is still a little altruism left

[Miranda]

Miranda, and sieve AT930 there? And the stirrer 512, my dog ​​gnawed, and without it it's inconvenient

[Autumn Girl]

Autumn Girl, there are only five nozzles.
Mini chopper, meat grinder, blender, dough sheeter, fettuccine attachment.

Sita 930 is nowhere to be found

And 512 is also on kenwood. ru and cookieschef. ru (both in Latin)
Only on kenwood it is cheaper by 200 rubles - 1990.

[Miranda]

Miranda, Thank you!

[Prank]

We went today with Prank to Globus in New Riga, there were heaps of nozzles. We bought nozzles and other things as much as two carts
I sent more parcels with attachments to cities without a Globe.

If someone else needs (who does not have a store) - Welkam.
There is still a little altruism left

Good day. Or you can ask you to buy attachments for the combine. Interested in multi-shredder and mixing attachment Kenwood AT 501.

[Raisa_27]

Raisa_27, the mixing attachment is called AT 512
AT 501 is a flexi with removable elastic bands.

Neither one nor the other in the Globe is not sold at a discount at a discount.

there are only five nozzles.
Mini chopper, meat grinder, blender, dough sheeter, fettuccine attachment.

Here's some of this - please.
Since my altruism is an attempt to restore the balance of goodness in the world, in the form of help to buy nozzles at a very good discount for those who do not have a Globe in the city.

Write a personal message.

[Miranda]

Miranda, good day!
Do not cease to amaze with the desire to help! Very nice!
Tell me, what kind of dough sheeter is presented in the Globe? Hex or old connector?

Tell me, what kind of dough sheeter is presented in the Globe? Hex or old connector?

Girls, dear, why are you tormenting Miranda. Enter Globus Krasnogorsk hypermarket in the search bar. On the globe page, click on promotions. You need a promotion Give your loved ones the best. There are all the attachments, choose what you need.

I used the new hook several times. I liked the fact that the dough does not climb up to the limiter, a maximum of half of the hook gets. But I kneaded the dough for a maximum of 600 grams of flour.
I didn’t like the fact that a couple of times I found flour at the bottom of the bowl, which did not interfere with the dough. I don’t know why this happens, it wasn’t with the old hook.
I want to try to compare their lengths and still slightly twist the new one if it is shorter.

[Skazi]

Skazi, Galina, but the new hook has nothing to twist, there is no nut. I made a batch of 500g of flour - I liked it very much, but the dough rose almost to the hook stops. It's great that you can compare. I just want the old hook in the collection out of principle.

VRad, Valeria, for some reason the Globus page with this special offer does not open, unfortunately! Writes that there is a mistake. Today I've been trying (((And Miranda is very grateful for her willingness to help somehow!

[Skazi]

I used the new hook several times.I liked the fact that the dough does not climb up to the limiter, a maximum of half of the hook gets. But I kneaded the dough for a maximum of 600 grams of flour.
I didn’t like the fact that a couple of times I found flour at the bottom of the bowl, which did not interfere with the dough. I don’t know why this happens, it wasn’t with the old hook. I want to try to compare their lengths and still slightly twist the new one if it is shorter.

Skazi, I did not twist anything, the flour never happens at the bottom. Firstly, I pour the flour into the water, and secondly, I knead the dough for 5 minutes at first. at the minimum, then 20 - 30 minutes of rest, then the main kneading: dough 58 - 64% moisture at 1 speed 8 - 15 minutes; 66 - and above% humidity at 1.5 (2) speeds 8 - 15 minutes, during this time the dough is collected either in a classic bun or like a bun (depending on humidity) and this bun will clean both the walls of the bowl and the bottom, nor what remnants of flour are out of the question. After all, you need to knead the dough until the gluten develops well, which means bring the dough to a state where it not only does not "smear", but also becomes smooth and gathers into a lump. I wish you success!

[Nataliya,]

Galina, the new hook has nothing to twist, there is no nut

Really? I didn't even notice. Today I'll go and see. Apparently, then it is necessary to change the principle of laying products - first liquid, and then dry. Maybe then the flour won't stay at the bottom.
And I will compare further.

I just want the old hook in the collection out of principle.

With a new hook, I wouldn't want the old one.

And what kind of corolla do you have - rare or fluffy? I'm also thinking about whether to lust for a little sparse corolla, it's hard to pick out squirrels from fluffy ones.

I found a couple of pictures with a new hook. This is wheat and rye dough.



Nataliya, Thank you very much for your advice! Usually I also knead at the minimum, then leave it to stand and turn on the machine again. I will try to do it clearly following your recommendations.