helenanik
Quote: Maria093

In the black elephant, the lasagna nozzle is 0.8 mm, while earlier it was 1.2 mm.
Maria, is that right? I ordered a black elephant on Amazon, and a 0.8 attachment for it in Japanese Ibei. I have already paid for everything and is going. If so, 1 will sell. If someone is interested - write in a personal.
Maria093
She herself is. I'm waiting with ibey 0.8. And I got an elephant looking, and on the back of the nozzle, on the iron part 0.8. But as soon as he comes, I will ask my husband to increase it, since there are plans for a thick one.
helenanik
Quote: Maria093

She herself is. I'm waiting with ibey 0.8. And I got an elephant looking, and on the back of the nozzle, on the iron part 0.8. But as soon as he comes, I will ask my husband to increase it, since there are plans for a thick one.
This is a thought! Is it possible to remove the jumper that cuts the sheets to get large tubes?
Maria093
You can, she's thin.
helenanik
Quote: Maria093

You can, she's thin.
Great, thanks, I guess I'll do it
gawala
Quote: elenanik
Is it possible to remove the jumper that cuts the sheets to get large tubes?
on the left - new for tubules. Right - for lasagne, native 0.8
Quote: Maria093
she is thin.
But strong. If you have something to cut, grind evenly, then you can do it ..
Pasta machine Philips HR2355 / 09
helenanik
Quote: gawala

on the left - new for tubules. On the right - for lasagne, native 0.8 But strong. If you have something to cut, grind evenly, then you can do it ..
Pasta machine Philips HR2355 / 09
Thanks, I will try to cut
gawala
Quote: elenanik
Thanks, I will try to cut
wait, I'll ask my husband, you can-can't and the consequences ...

The husband said that it is possible to cut it, but there will be no coating, it will be destroyed by cutting, there will be pure aluminum on this cut, which is not really good for the product. may smear gray, well, aluminum will naturally be on the test itself. If you still cut it down, then you need to grind it very well so that the tube will come out evenly ..
helenanik
Quote: gawala

wait, I'll ask my husband, you can-can't and the consequences ...

The husband said that it is possible to cut it, but there will be no coating, it will be destroyed by cutting, there will be pure aluminum on this cut, which is not really good for the product. may smear gray, well, aluminum will naturally be on the test itself. If you still cut it down, then you need to grind it very well so that the tube will come out evenly ..
Thank you, I will look for something to cover or sell.
gawala
Quote: elenanik
I will look for what to cover
Nothing to cover. This is a type of teflon coating ..
helenanik
Quote: gawala

Nothing to cover. This is a type of teflon coating ..
We have offices
gawala
Quote: elenanik
We have offices
Well, if there is, then try it.
GruSha
Quote: julia_bb
I made ravioli from lasagna sheets, I didn't really like it - the dough is dry and not very elastic.
agree!!!
gawala
Quote: GruSha
Quote: julia_bb from Today at 11:23 am
I made ravioli from lasagna sheets, I didn't really like it - the dough is dry and not very elastic.
agree!!!
And if you make the dough a little wetter? I didn’t make ravioli, but I did lasagna and the dough was very pleasant, not dry, elastic. but I added a little more water, even when it seemed like there was enough, I still splashed more .. The leaves were very pleasant to the touch ..
Anna67
If I make the dough the way I want, then the elephant will still be a lump in the container without extraditing anything, since it will not even get there ...
gawala
Well, it's not up to fanaticism to pour water .. And so .. so that the "peas" were not dry to the touch ..
Maria093
We liked the ravioli. Today I did it with minced meat for everyone and what was left for me with tofu and green onions. They did not fall apart, of course a little thicker than I usually do, but I often fall apart. The son said that he loves these. I have a 0.8 mm nozzle.
marinastom
Thank you all for your feedback and opinions!
I'll try it myself and decide if it is or not.
gawala
Quote: Maria093
I have a 0.8 mm nozzle.
And all "relatives" have 0.8mm.
Maria093
Chernenky
Svetlana777
Quote: gawala
And all "relatives" have 0.8mm.
and I have 1mm written on the box (small one)
gawala
Quote: Maria093
Chernenky
Yeah. Relatives.I have the same..




Quote: Svetlana777
and I have 1mm written on the box (small one)
Another model ..
kil
Hooray nozzles came to me🤗🤗🤗.
Many thanks to Anna. Girls poke me at the cookie recipe. How much and what to hang in scales. Very eager to try.
And do thin noodles according to the same recipe as spaghetti?
gawala
Quote: kil
poke me into a cookie recipe
Act villainous !!!

Pasta machine Philips HR2355 / 09Shortbread cookies with cocoa (Philips pasta machine)
(Rada-dms)
Pasta machine Philips HR2355 / 09Express ginger cookies (pasta machine Philips HR2355 / 09)
(Masinen)
kil
gawala, thank you dear
gawala
Quote: kil
thank you dear
not at all..
domovoyx
Pasta machine Philips HR2355 / 09
I congratulate all forum users on the 8th of March!
gawala
domovoyx, Thank you Alexey!
kubanochka
Kind people! Owners of small elephants deprived of attachments))))) are there any people willing to purchase such a set?



Purchases from the Chibo online store (Russia) # 7348

You can order Tanechka and pay. And our Elephants will be happy)))))))))
Nathalte
Ladies, not quite in the subject, but what can you say about
HURAKAN HKN-PM3 and PM6?
For example.

🔗


It seems that they are similar in appearance, and the price ... But there are no reviews at all. And the attachments for model 6 are very cute and as many as 10 pieces. Or shouldn't you look in his direction?

Fifanya
Nathalte, An interesting machine.
As far as I understood, this company, which posted a video for public catering on YouTube, supplies equipment. But how good the device itself is

🔗

The plastic auger is embarrassing, but my Fairy, it was also plastic, there were no problems (the process itself was very loud and slow there, the engine was more powerful and quieter and it would be great), and in the kid it was like a plastic auger.
domovoyx
I had an ARIETE 1591 Pasta-maker. Everything is plastic. The plastic is thick. I used it 2 times, and on the third it did not turn on. In the SC, two printed circuit boards were said to have burned out.
There were no reviews for this paste maker either.
Twig
Quote: gawala

wait, I'll ask my husband, you can-can't and the consequences ...

The husband said that it is possible to cut it, but there will be no coating, it will be destroyed by cutting, there will be pure aluminum on this cut, which is not really good for the product. may smear gray, well, aluminum will naturally be on the test itself. If you still cut it down, then you need to grind it very well so that the tube will come out evenly ..
aluminum quickly oxidizes and due to this surface film does not harm health, since it does not enter the body. Most recently, there were aluminum forks-spoons in canteens (maybe now where they are)
Harmful foods in al. Store the dishes, as under the influence of acid, the layer of oxide film on the surface is destroyed.
I do not consider it necessary to continue the discussion, but I studied chemistry at the university, I remember something.
gawala
Quote: Twig
aluminum quickly oxidizes and due to this surface film does not harm health, since it does not enter the body.
Quote: Twig
may smear gray, well, aluminum will naturally be on the test itself.
Quote: Twig
Most recently, there were aluminum forks-spoons in canteens (maybe now where they are)
But no one used broken forks and spoons, and the pan, if corrosion went, was also thrown away ..
And the statistics of those who died from forks-spoons, pots with an enamelled coating, such gray, beautiful ones were sold, with 6-valent chromium and bimetallic pans we don't have ..
In general, there is nothing to argue about, I think. Everyone decides for himself what is harmful and what is not. I just wrote a piece of advice from my husband, who knows more and more about aluminum.
Maria093
But the plastic can probably be expanded safely ?! And then I also have two 0.8 nozzles. I want to expand one (plastic part) for pies / pasties.
marinastom
There is such flour on Ozone. 🔗
Who tried it?
gawala
Quote: Maria093
But the plastic can probably be expanded safely ?!
Can. The husband suggested, if necessary, he would cheat the notch. But I don’t need ..
Maria093

Quote: marinastom
Who tried it?
I tried fine grinding, much finer than Mistral and Pudov. Some kind of silk, even yellow macaros, as tasty with an egg. If I understand correctly, then semola and semolina differ in grinding.This is semola.
marinastom
Well, thank you, Maria, for a review.
I liked the pasta made from regular flour and from solid. Daughter is more solid. We must try this one too.
balabolka
Good day! Unfortunately, I haven't mastered the whole topic yet, but the question is already there. I tried to make lasagne sheets, 200g durum flour, 50g premium bakery and 90g water. At the exit, the sheet turned out to be, as it were, collected at the edges and elongated in the middle. In general, it was uneven, but with a hump. Can you please tell me how to get even sheets for lasagna?
gawala
Quote: balabolka
200gr durum flour, 50gr premium bakery and 90gr water.
Maybe try to make sheets like in the original recipe for a pasta machine? General flour, water and egg.
Although I did it from solid grain, everything was fine, it didn't seem to be going around the edges, but there was a "hump", but this was not an industrial production, quite possibly a hump was acceptable, and it didn't interfere in any way.
Pasta machine Philips HR2355 / 09
Olga VB
I have not done these yet, although there is a nozzle ..
But I see that such a hump hints at khinkali
Che-t I haven't done them for a long time

By the way, if the hump is really annoying, you can straighten it straight with your hands when laying in a mold, while the dough is elastic.
Good luck!
Cvetaal
Quote: Svetlana777

can you find out the brand of this flour? (i.e. manufacturer

Svetlana, I apologize for delaying the answer. Photographed flour from Taste Will.
Pasta machine Philips HR2355 / 09

And here on top of Vkusville's is Italian TV.

Pasta machine Philips HR2355 / 09
Svetlana777
SvetlanaThank you very much, I have not seen this one, but knowing it by sight is easier to look for
Olga VB
Svetlana, is she getting 130 rubles? And how do you like it?
Cifra
Endaxis do not have to be bought in tasteville, they also sell flour under their own brand.
Cvetaal
Quote: Olga VB

Svetlana, is she getting 130 rubles? And how do you like it?

Olya, I use both this and Italian - which one comes to hand))). Macaros work well.

Quote: Cifra

Endaxis do not have to be bought in tasteville, they also sell flour under their own brand.

And where can I find her?))) And the Taste of Will is at my side
Olga VB
Quote: Cifra

Endaxis do not have to be bought in tasteville, they also sell flour under their own brand.
I looked at this flour in other places, it turns out it is 168 rubles / kg everywhere.
Lenochka, Cifra, and where and how much did you see her?
Cifra
Cvetaal, I do not suggest looking specifically
Olga VB, I usually buy everything in the platypus. Including this flour a couple of times. But it costs about the same with the Italian one, so for the time being I just manage with the shares of U August.
Tried the penne attachment again today. 125 hard flour + 125 soft, egg and water up to 110 grams. It seems to have adapted to the proportions.
Pasta machine Philips HR2355 / 09
julia_bb
Quote: Cifra
Tried the penne attachment again today
They look appetizing! I have to do it myself, I love curly paste

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers