How to place dishes in the dishwasher

[Lena]

Lena, Lena, but I didn't bother with it. I loaded it, closed it, pressed it, saw the time. Always the same, approximately. And when there is already a full load with the top, when there are a lot of dishes, then another time is displayed. And what is there and how it works, I will not say, at least try. I do not know.
The instruction was transferred on the knee and forward to use. Something like this

And when there is already a full load with the top, when there are a lot of dishes, then another time is displayed.

Right at the moment you select the desired program? Cool ... And what should you do first, load the dishes and then select the program, or vice versa? Probably the first, right? Or does she change the numbers right in the process of loading?

Gyyy ... load, close and select the program.
Dashes appear on the lisplay, about 3-5 seconds, then it starts rinsing, the display is dark and in the process of rinsing, numbers will already appear. It's to wait a couple of minutes. While you are spinning with a rag in the kitchen, you can already see everything

Added Friday 17 Mar 2017 6:59 pm

This is a typewriter with buttons on the front. And my friend has buttons on the top of the door. It's a little different there. First you select the program, and then you close it. This is the one that screeches like a plague

Dashes appear on the lisplay, about 3-5 seconds, then it starts rinsing, the display is dark and in the process of rinsing, numbers will already appear. This is to wait a couple of minutes.

Ooh .. I see. That the machine doesn't show you the time beforehand to change something there.)) I got stuck - I have a complete installation, I just press the program and it has already been showing for a while.

So I also have an installation. But, on top of the door on the face) cm 20 - control panel.

This option is called "partially embedded".

This option is called "partially embedded".

UbiTSTSa is possible, but I'm still racking my head, what does that mean? Half a car is something built in Mdya ..... Thank you

Half a car is something built in Mdya .....

20 centimeters were not built in.

I'll ask the girls. I read the whole Temka, did anyone manage to bring aluminum things back to life? my duralumin frying pan and ducklings darkened. the frying pan generally stains my hands with black, I climbed here on the internet and was stunned that it turns out that such dishes should not be shuffled, only the wooden silicone plastic scoops of the ladle should not be scratched. in general there is worse than Teflon. and my mother has such pans all her life and in the country, too, and than we only have them ... even with a loofah of iron and sand once washed

Here and here wash with "iron and sand sponge" to peel off the darkened layer.)

[Valentine]

has anyone managed to bring aluminum things back to life

Valentine, so the instructions say that it is absolutely forbidden to wash aluminum dishes. A plaque is formed on it, which is harmful to health.
But, of course, I washed it too, in due time.
A metal sponge to help you and gloves. Good luck!

Added Sunday 19 March 2017 7:20 PM

yes, it was not me who washed it, but my husband put it in ((so it turns out that the fact is that this dish is tinned and you can't do anything like that, even a powder like pemolux, otherwise the protective layer is peeled off and it is then generally harmful to cook in it ........ and I rubbed it with an automobile skin on top so it cleans well))))))))

Aluminum? Under the tin ?? It's not copper. Are you confusing anything?

Added Sunday 19 Mar 2017 7:26 PM

No, I don’t believe there can be tin in an aluminum pan. It would glass at the first accidental overheating.))

in general, there is worse than teflon

and my mother has such pans all her life in the country

understood nothing. What kind of dishes do you have so touchy?
If the usual duckling was Soviet, then I washed it, first in the PM, and then with my hands. I got pleasure forever.

so I read it in several places and honestly went nuts ...... the kukmara frying pan is ordinary and the duckling is Soviet ... in one place it says "Another question that arises during its operation is how to clean aluminum dishes? the dishes should only be used with a soft cloth or sponge without the use of powder, which will burn to damage the surface.If you do not know how to clean aluminum dishes from dark spots, then it is best to use ammonia, a couple of drops of which will not only remove unpleasant plaque, but also give shine How to wash aluminum dishes, if there is no ammonia? Use ordinary vinegar, it will perfectly cope with the task. "

I am my Soviet duck in PM all the time, the first time it turned black, I washed it with the usual dishwashing detergent, everything was washed and then how many times I shoved it into the dishwasher, nothing turned black

try to make fun of them even then

[Valentine]

Valentine, I easily washed off this blackness, so I don’t worry about washing it like a soap, by the way, I also wash my manual meat grinder in PM when I use it. I still have a feeling that it depends on the detergent, it turned black for sure, but now I use something else - it does not turn black

[V-tina]

V-tina, I have never washed a powder with somat at all, I have a finish powder, alley well, and the tablets are different

Added Sunday 19 Mar 2017 08:28 PM

need to try

[Calipso63]

Calipso63, Wish you luck

People, who knows what about Korting? I can't make up my mind. It's good that the renovation is not finished yet
I looked at the site, I liked everything. But the reviews are very bad.

I looked at the site, I liked everything. But the reviews are very bad.

That is, Russian programmers are better than Chinese workers?))

That is, Russian programmers are better than Chinese workers?))

That's for sure))
In fact, I mean that they have a lot written about the quality on the site positive, but negative in the reviews.
But as it was already noted here that the reviews can not always be trusted either ... "marketing wars"
Can someone use it?

"marketing wars"

With Corting ?? Oh well ... Who needs him, fight him. It is likely that much of what has been written is true. Maybe then it's better for Miday under his own brand? Gorenya seems to have the same models as Korting (Gorenya sold this brand to the Russians), but it’s worth not even cheaper than a "copy" if you look.

Maybe then it's better for Miday under his own brand?

Is Corting Midea? Or Is It Burning?)

who knows what about Korting?

A few days ago I came across a review on the site "I recommend": the girl compared Corting with Bosch. I have Bosch, so I read it with interest. She told everything in great detail. So here I am: after reading it, I still did not regret that I bought Bosch))) The price of the question, of course ... but I have the simplest model with three programs. I use one))) And I don't even use the cutlery tray - it is not needed.
And yes, Corting is Midea, China.

[Yulchitai]

Yulchitai, I am also against such experiments. There are also unimportant reviews about Boshi and Siemens. But they also stand with friends, I see how they are exploited. And Corting is like a pig in a poke.

There are also unimportant reviews about Boshi and Siemens

I even have a rough idea of ​​who writes them. The mother-in-law simply hates the dishwasher (is she jealous, or what?)))), And when the saucepan is badly washed from the broth, she is so happy, as if everything, everything dirty, remained. And the pan is Soviet, with a curved, slightly convex top. And this top prevents the water jets from flowing normally. Well, you need to put it at the right angle.And also take into account that it's like in a washing machine: if you throw an oily robe there without preliminary washing, then the stains will remain at the exit. Instead of reading the instructions, people write bad reviews, and it's sad ...

Is Corting Midea? Or Is It Burning?)

The Corting brand belongs to Goreny. Everywhere except Russia. Then they sold it to our company. But Gorenie herself does not disdain Mideei. So the same model can be found under different brands. Goreny's Corting has ovens. Which is real Burning, not China. But then the meaning of buying a re-branded product is still not clear if you can buy the original.

Although, in fact, in such moments, service is very important. And if everything is fine with large manufacturers, then small ones still have a question.

Thanks everyone for the answers.
I'm not worried about China at all. If the brand is normal, then it is also bringing quality products from China.
Service and maintenance after purchase is probably really important here. Somehow we bought a mixer here. I worked for less than a month. In the official service, they changed it to the same new one without talking. The new one has been working with a bang for over a year.

[Yulchitai]

Yulchitai, I am also against such experiments. There are also unimportant reviews about Boshi and Siemens. But they also stand with friends, I see how they are exploited. And Corting is like a pig in a poke.

To be honest, I don’t know why everyone is crazy about bosha, when I chose PMM I avoided this company, as a result I took Hansa and am very happy!

[Anyutka]

Anyutka, so it's great that you are satisfied! It is most important.
I praise my PMM, comparing it to others that my girlfriends have.

who knows what about Korting?

I have such a PMM, terribly unhappy. Either it washes normally, then it does not wash at all - it only "nails" the dirt to the dishes. I then thought it was my jamb, but it must be such a bad car. If you have a choice, then look for another option.

My girlfriends do not have PMM, one cannot afford yet, the second says that PMM consumes a lot of electricity, but I really love my PMM and I don't care who says what.

The dishwasher does not eat a lot of electricity, checked. I have an electric boiler, for a month of using the dishwasher the same readings as without it. There is another factor and nuance - the cost of hot water - in Ukraine it is at cosmic prices. Agree, you cannot wash a mountain of dishes in 10 liters of water (wash it and rinse it as well). Well, such a small bonus - do not dip your feet in aggressive agents, the dishes are washed, and you are flipping through such a tired forum

[about one and a half kilowatt * hours]

I'm afraid to lie, but, in my opinion, something about one and a half kilowatt * hours I intend for the hottest program in my car. The program lasts a little less than three hours, has a pre-rinse with heating, a washing temperature of 65-75 grams and quite a hot rinse, because I wash with a tablet.
By comparison, a large washing machine used just under four hundred watts.

I may be wrong, experts will correct it, but she does the main electricity consumption when heats the water, and then slowly and sadly sprays it. Yes, by the way, my Indesitina (not at all the limit of dreams and possibilities) in 35 minutes, with a tablet, washes the pan in which the pork broth was cooked, except for the rest of the load. And at this time it enters: rinse with cold water, heat-wash, rinse again. And the dishes come out very hot after drying.

The dishwasher does not eat a lot of electricity, checked. I have an electric boiler, for a month of using the dishwasher the same readings as without it. There is another factor and nuance - the cost of hot water - in Ukraine it is at cosmic prices. Agree, you cannot wash a mountain of dishes in 10 liters of water (wash it and rinse it as well). Well, such a small bonus - do not dip your feet in aggressive agents, the dishes are washed, and you are flipping through such a tired forum

100% of my electricity indicators in the presence of a boiler before the appearance of the PMM and after its appearance did not change. And the amount of water used has decreased

my electricity indicators in the presence of a boiler before the appearance of the PMM and after its appearance did not change

Girls, but for me they have decreased! We have a limit for a non-gasified apartment with a 300 kW boiler, so I always had a very large overrun, and then they bought a PMM and began to fit into the limit, well, now the gas was supplied, and I won't part with the PMM for any price, I have it for the day is hammered to the eyeballs We turn on the machine every day, sometimes twice and almost always keep within the 150 kW limit. And to those who twist at their temples, why PMM, I don't even explain anything, I don't see the point, let them twist it further and wash it with my hands .. I dream of giving my mother a dishwasher, but I can't allocate so much money yet

I know that PMM consumes a little electricity, just annoying people who say something reliably without knowing. In any case, I still use electricity for free, the old meter is covered, and the new one has not yet been installed.

If you have a choice, then look for another option.

I read it on other forums, many are in solidarity with you
Let's look further)

My glass also scratches during washing, although I don't put it on the pins and put it at a distance. I use a powder finish. Who also scratched the glass with what product did they use, powder, gel or tablets?