SilverCat
While I'm leaning towards ordering the ceramic bowl and stainless steel here:

Dex pressure cooker DPC-40
stainless steel 30 yuan
ceramics 40 yuan

24 cm diameter, 22 inside without sides, height 13.6 tube per tube))
the seller has a good rating and a lot of sales, which means that the bowls are in stock and that he will not pull the cat by the tail for 2 weeks, but will send them to the intermediary quickly (pah-pah)
but this seller does not have rubber bands

I also liked this store, there are fewer sales, but there are elastic bands, lids, bowls that fit exactly and which probably fit)) a very large selection and different prices ..

Our non-stick bowl (for model PLFJ5005, LE505)
Dex pressure cooker DPC-40
23.6cm x 13.4cm x 1.7mm, 0.6Kg
Probably comes with a lid, 55 yuan

Cheap stainless steel
Dex pressure cooker DPC-40
23.6cm 13.5cm 22 yuan

stainless steel a little more expensive
Dex pressure cooker DPC-40

23.6cm, 高度 约 13.5cm, 厚度 约 1.7mm。 35 RMB

stainless steel dear
23.6cm, 高度 约 13.5cm, 厚度 约 1.7mm。
Dex pressure cooker DPC-40
65 yuan

ceramic bowl that fits
Dex pressure cooker DPC-40
40 yuan

cap
Dex pressure cooker DPC-40
5 yuan

elastic
Dex pressure cooker DPC-40

15 yuan

I don't know what, but maybe we need it?
Dex pressure cooker DPC-40
5 yuan

SilverCat
In general, I wrote to the intermediary, I will find out how much the first two pots will be in hryvnia. I think two hundred hryvnias, the weight is big after all. Tomorrow I'll tell you for sure (if someone finds a more profitable intermediary, I'm with you)) I will order whoever wants you with me, or you can wait until the parcel arrives for me, we'll see what comes and what quality, and then decide to order or not)) Parcels usually go a month and a half.

I didn't find an O-ring with a metal part and, having estimated by weight, I didn't want to look, it's easier to buy in dexline whoever needs it. And in China, buy silicone parts)
Ukka
SilverCat, Olesya, here you are a smart girl !!!
Quote: SilverCat

By the way, someone was looking for a lid. in the same store, it costs 5 yuan
At this price you can buy a couple !!!
Quote: Sone4ka

the size seems to be the same
Fine!
Quote: SilverCat

I don't know what, but maybe we need it?
Dex pressure cooker DPC-40
Need to! This gasket also fits over the removable cover (center).
Quote: SilverCat

In general, I wrote to the intermediary, I will find out how much the first two pots will be in hryvnia. I think two hundred hryvnias, the weight is still big.
Less, behold here mary_kyiv described how much they cost her on the Tao ... hereas ordered ...
If you order it yourself, then delivery to Ukraine is $ 25 per kg, and if through SPshny sites, then a maximum of $ 15, as I understand it ... mary_kyiv it turned out generally $ 9 per kg.
Sone4ka
Quote: SilverCat

In general, I wrote to the intermediary, I will find out how much the first two pots will be in hryvnia. I think two hundred hryvnias, the weight is big after all. Tomorrow I'll tell you for sure (if someone finds a more profitable intermediary, I'm with you)) I will order whoever wants you with me, or you can wait until the parcel arrives for me, we'll see what comes and what quality, and then decide to order or not)) Parcels usually go a month and a half.

I did not find an O-ring with a metal part and, having estimated by weight, I didn't want to look, it's easier to buy in dexline whoever needs it. And in China, buy silicone parts)

and on which site did you write off the intermediary?
Julia V
Girls, they promised me a non-stick bowl from Deksline Senya
I looked at the links, the variety makes me dizzy, and I can't think of anything. So, I think you need a good stainless steel for soups and a lid for it. How about ceramic? Need to take? I saw a spare valve somewhere else.
Monica
Quote: Julia V

Girls, they promised me a non-stick bowl from Deksline Senya
I looked at the links, the variety makes me dizzy, and I can't think of anything. So, I think you need a good stainless steel for soups and a lid to it. How about ceramic? Need to take? I saw a spare valve somewhere else.

I think ceramic is needed, stainless steel is definitely needed * JOKINGLY * And a spare ring and gasket and cap (yes not alone), it's not even worth talking about

Girls, but please poke me a bowl of 5 liters in Polaris, I would not refuse a bowl for Dexika-50
Julia V
You need to take 2 spare silicone parts, just in case. And so that they do not suspect in commerce, it is necessary that the intermediary immediately send them to our addresses, probably.
I've been thinking about the second pressure cooker, and now I decided that I just need a few supplies and that's it, the pressure cooker cooks quickly. 20 minutes - the first, 20 minutes - the second, and 5 minutes - compote, insert only clean saucepans
Sone4ka
I read you as I look into the water)) the same thoughts, the same reactions and wishes
I, too, need two sets of silicone rings, and a couple of lids, different pots to make it))
Ukka
I need a set of silicone pads at the moment. Girls, I especially emphasize about the set - there is also a gasket on the float valve, and you can lose it somehow ... I don't want St. to stand idle because of such a bummer ... And the set also contains a ring and this gasket and a gasket on the inner cover. And you need a valve ... And a couple of caps ...
As for the bowls, when I take Dax, I will order a couple of ceramic bowls in China - at Brand and Dax. I liked very much the Povosov ceramics! It seems like the bottom has darkened, I think the bowl is wearing out, rubbed it with Sif - the mustache brightened. For 1.5 years of the life of the bowl (with me and the first mistress) - the bowl is without scratches, it does not stick to it, does not weld ...
To cheer up - we are relatives of pressure cookers on the Wise. Today I froze - I named the pressure cooker Brenda Povosovna.
Still, Schaub tease - a photo of the children of the leash.

Dex pressure cooker DPC-40
Dex pressure cooker DPC-40


Quote: Monica

I would not refuse a bowl for Dexica-50
Yul, somewhere I saw an analogue, wait, I'll look for a brand ... I found povos FY403, this is it, but I can't find the components ... Keep only Dexica-50, but is it for 4 liters?

🔗



Julia V
chaki2005 A good present, Tanya, and they have pans with Dex-40 that are not interchangeable?
SilverCat
Quote: ukka

Talamea, Ol, and if it's no joke - if you often cook broths and jellied meat, then a stainless steel is absolutely necessary. And if not often, then take ceramics and gentlemanly a set of silicones and spare parts valve. You said you don't need covers ...
This is purely my opinion, but I like ceramics more than stainless ... You can cook and bake everything in it. and it warms up faster!
And it's up to you ...

Thank you, I also just thought about the question of what to do with a ceramic saucepan)) I knew that the thing was necessary, now at least I know why)))
Julia V
Quote: Talamea

Damn, I just get a spare wheel from Dexline, but I already want ceramics and stainless steel ... and I want silicone ... mommy dear ... what to do ...
Olya, she's coming to me too. And I want everything too.
I won't use the spare wheel from Dexline yet. Suddenly, the spare wheels will disappear again, and if the idea with Tao burns out, it may be possible to sell the non-stick spare wheel.
Ukka
Quote: SilverCat

Thanks, I also just thought about the question of what to do with a ceramic saucepan)) I knew that the thing was necessary, now at least I know why)))
Olesya, she's as good as Dex's, only the coating will be better ... I don't have Dex40 (I felt it only in the store), I can't compare how much better it works ... If we compare Povos's ceramics and Teflon in Panasonic , then ceramics rules!
If the bowls cost as MariKiev did, why not buy a couple + silicones for 200 UAH?
Quote: Julia V

I saw, I recognized someone
Well, sho, will you take Brenda Povosovna and me for relatives? And Fili Povosovichi there, senior and junior. And of course, beloved youngest daughter DeKsyunya!
Ukka
Dotsya laughs at me all the time that I think out loud who is my kitchen. technicians who are a boy or a girl ... Rice cooker Klasha, simple, detailed. Cartoon Panasonic - a boy - an intellectual Pasia (not to be confused with a kid). Brenda is a nimble girl - a brunette, she looks like me in character. Orinka bread maker, taka sobi fine maiden. Refrigerator I'm busy and washing machine Zanuska, my laborers.
Dotsya laughs, laughs, while she talks to her phone and computer ...
SilverCat
Yes, if we find a good intermediary, then I can’t vouch for myself))) Now I’m looking at intermediaries on the shophelper, but I haven’t found $ 9 kg yet. There are options where the first kg is 170 yuan, the rest are 60 yuan and even 0% commission, but there they earn on the package as far as I figured. In general, I would like a trusted supplier.
Julia V
I received an SMS from Deksline with the invoice number. I struck on the New Mail website when it arrives, and the delivery is also scheduled there, in general the saucepan cost me 236 grivasiks, not cheap, I want to say. But I was more worried that I would be left without a spare wheel at all.
Julia V
If I bake, then in Dex-60. Because the pressure of 40 is not gained during baking, and the time is approximately the same for baking. And the pot is of better quality in the 60's, after all, and I have two of them. But I baked it a couple of times in 40 minutes, set it for 30 minutes and then wound it for 20 more.
Talamea
Quote: Julia V

I received an SMS from Deksline with the invoice number. I struck on the New Mail website when it arrives, and the delivery is also scheduled there, in general the saucepan cost me 236 grivasiks, not cheap, I want to say. But I was more worried that I would be left without a spare wheel at all.
Here I am, grabbed on the move ... Just in case.
I will decide on the saucepans. I'm waiting for a stainless steel, maybe SupercoW will respond, she had stainless steel. Or I'll look for someone who works with TAo-bao to order. Or ceramics ... I don't even know. Just panic ...
Ukka
Talamea, Ol, don't panic! Together we will figure it out and order in China!
How long did I live without a spare wheel at all, and now I’m not a brat ... Be patient a little, we’ll figure it out and order!

Girls, asked Kristino4ka from the shophelpa to calculate how much the 5005 model (DEX DPC-40) with two spare parts and with all deliveries and% will cost me - it turns out to be $ 104 in total. I asked this, if suddenly DEX DPC-40 won't wait for me ...

Julia V
Quote: Talamea

Here I am, grabbed on the move ... Just in case.
I will decide on the saucepans. I'm waiting for a stainless steel, maybe SupercoW will respond, she had stainless steel. Or I'll look for someone who works with TAo-bao to order. Or ceramics ... I don't even know. Just panic ...
I just thought, let them be in reserve. I use the pressure cooker all the time, and I take it out less and less often. She cooked pilaf only in MV all the time, but now she got used to it, thanks to the girls who owned Saturn SV.
Ukka
Quote: Julia V

Because the pressure of 40 is not gained during baking ... But I baked it a couple of times in 40, set it for 30 minutes and then wound it for 20 more.
Does it bake normally? I bake biscuits in my own, I like it very much! The valve also does not close, the time is 50-60.
Quote: Julia V

I just thought, let them be in reserve. I use the pressure cooker all the time, and I take it out less and less often. She cooked pilaf only in MV all the time, but now she got used to it, thanks to the girls who owned Saturn SV.
I also now use almost only CB. Panasonic only for delicate stewing. And I cook pilaf in a rice cooker (well, I have such a quirk), it turns out very sincere there. Although I am very happy with cereals in SV !!!
And the spare wheels, yes, will be very useful, the pocket does not pull the stock!
Julia V
It bakes fine, it seems to me that it will be hotter than MV.
That's it, I disappeared on Shophelpe
Ukka
This, as I understand it, is by sea ... It's okay to wait a long time, because my daughter only collects her dowry, but she's not married yet.
Oh, girls, to figure out where the $ 9 is. per kg, we urgently need to look for MariKiev ... If she took from Kristinochka, then hovays tao - we will buy all the spare parts from Povos ...
chaki2005
So, I am reporting. The saucepans are completely identical in all sizes. Dex's are heavier. What's in height, what's in width and diagonal are all one to one. I decided to quickly cook an omelet in a Dexian saucepan, but on Saturn. I put it on Rice for 5 min. and everything was perfectly prepared. The test was successful.
SilverCat
I asked MariKiev, it was a long time ago and her intermediary is no longer working + the yuan to dollar rate was more profitable, now it would come out $ 10 per kg.
They sent via china post SAL and the package weighed almost 18 kg. Therefore, to make it cheaper, you need to find those intermediaries who send salaries. This is always the cheapest shipping.
chaki2005
Here is a photo report.

Dex pressure cooker DPC-40

Dex pressure cooker DPC-40

Dex pressure cooker DPC-40

Dex pressure cooker DPC-40
Julia V
Quote: chaki2005

So, I am reporting. The saucepans are completely identical in all sizes.Dex's are heavier. What's in height, what's in width and diagonally are all one to one. I decided to quickly cook an omelet in a Dexian saucepan, but on Saturn. I put it on Rice for 5 min. and everything was perfectly prepared. The test was successful.
So I suspected that the saucepans were the same. It was only embarrassing that Saturnovskaya was not covered outside.
Well, Tanechka, now you have a comparative analysis of pressure cookers
chaki2005
Quote: Julia V

So I suspected that the saucepans were the same. It was only embarrassing that Saturnovskaya was not covered outside.
Well, Tanechka, now you have a comparative analysis of pressure cookers

That's just a cover without protection and very much. If you unsuccessfully take the lid, it will be very AI. There is almost no experience yet, but it seemed to me that there is almost no condensation on the Saturn lid. When you open it, it is almost dry.
irysska
Quote: chaki2005

That's just a cover without protection and very much. If you unsuccessfully take the lid, it will be very AI.
This is yes - a minus of Saturn, but not at all scary - for its price. And it's not stressful for me - I didn't have another pressure, so there is nothing to compare with.
Lozja
Quote: Catwoman

Girls, and lope is squeezing that? The saucepan is just CLASS! I love my 50, does my 40 have the same saucepan?

Thinner, but the coating inside is the same, it seems to me that I will soon have a year, like new inside. But outside it was knocked down at the bottom in a circle. But outside - that is nonsense.
Julia V
Quote: Lozja

Thinner, but the coating inside is the same, it seems to me that I will soon have a year, like new inside. But outside it was knocked down at the bottom in a circle. But outside - that is nonsense.
And I already have a badly scratched inside and the number 5 on the division peeled off
Julia V
Quote: Lozja

What are you doing there in her?
Well, that's just where I cook. Soups, meat, cereals. And I still boil milk once a week. I don't bake.
SilverCat
Quote: Julia V

Well, that's just where I cook. Soups, meat, cereals. And I still boil milk once a week. I don't bake.

Is the oven for coating harmful ?? I bake and bake ..
Julia V
No, it’s not harmful, it’s just that something will suddenly burn.
Talamea
Today I got a spare tire from Dexland. 235 UAH turned out with delivery. And SupercoW responded, find out what cups she has. I have two non-sticks now, if she has a stainless steel or ceramics, I'll take it from her. And the silicones will be waiting for you, girls, maybe we can cooperate and order in China ...
chaki2005
And where should I stomp with my joint reports?
Girls who are curious about the pot exchange field trials - have a lookhttps://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=284862.new#new
Talamea
We can even houses)))

Responded SupercoW (here is her topic: ( https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=162308.0 ), she has again appeared and will come more stainless steel, which fit our DEKsik. Price 250 UAH. I will borrow from her.

Only silicones remain.
Talamea
Quote: LLika

Girls, I’m with you for the purchase of rings and pans, I’ll just deal with the dimensions. I have a Comfort Fy-500 pressure cooker.
Can you measure the size of the ring on your SVShka?
Juli31
Hello to all aborigines !!!
Less than three days of reading the forum and I decided to buy!
I'm picking up my pressure cooker tomorrow !!!! I "pressed" the recipes at you, copied them, printed them out - in general, I am waiting for Deksunya fully armed.
But I already wanted a spare saucepan for it. Maybe I'm in a hurry?

Sone4ka
Quote: Juli31

But I already wanted a spare saucepan for it. Maybe I'm in a hurry?

not at all! in it you will be able to cook any meat on the bone (and not only), which means you will save your own pans from premature aging.
I realized it too late

Talamea
Yeah ... spare pots, sometimes they weren't there, sometimes they flooded ... Today I received a letter from the Russian representative of "Brand" LLC:

We would like to inform you about the availability of the Brand 6050 multicooker-pressure cooker bowl (saucepan).
Bowl (saucepan) for multicooker-pressure cooker Brand 6050
You can get information and place an order on the page: http ***: // or by phone (495) 662-59-97.

Respectfully yours, Brand LLC team
You can follow the link by removing the asterisks

The bowl is good and suits our Dex, but the representative office in Moscow, unfortunately ...
Ukka
Yul, right here
Quote: Talamea

Responded SupercoW (here is her topic: ( https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=162308.0 ), she again has and will come more stainless steel, which are suitable for our DEXIK. Price 250 UAH
By the way, she also had silicone rings. Maybe now they will ...
Quote: Juli31

ABOUT!!! I already found one stainless steel, it is 250 UAH, and my dear one in Deksline 195.00
What is stainless steel more reliable?
And where did you find the stainless steel?
Yul, well, compare a Teflon frying pan and a stainless steel pan, what will become of a stainless steel? It is eternal! Teflon tends to scratch and peel over time ...

A mat. read a part, you will quickly understand your beautiful assistant !!!
Ukka
But the oven will not work in stainless steel ... And it is better to fry in a native or ceramic bowl ... Only ceramic ones are either in Russia or in China. We want to order them somehow.
In the meantime, take stainless steel, and if you want a complete set, take your own spare tire. Then you will understand what a thrill it is when you have several bowls for CB !!!
Juli31
Quote: ukka

.. And where did you find the stainless steel?

Here, I read the page on ... 69
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=162308.0
Juli31
Quote: ukka


A mat. read a part, you will quickly understand your beautiful assistant !!!
Fuf just this and doing the last 3 nights, Ol (found where the names to peep) !!!
It all started with choosing a multicooker, and ended with a pressure cooker
So far I have just made a decision in favor of the pressure cooker, and now I will disassemble the "insides" with general help
Ukka
Julia, good luck in learning! Have you already cooked something in it? If something is not clear, ask, the girls will tell you!
That's right, I chose the pressure cooker right away! I have been at the forum for a long time, I have long caught fire with multi-cookers, pressure cookers. In 2008, I wanted to buy a pressure cooker, then there were Landlife in Russia, so one authority (not from our forum) dissuaded me ... First I got a rice cooker, then a Panasonic cartoon, but in February of this year a pressure cooker appeared. I realized that such happiness in life in the kitchen!!!
Quote: Juli31

Now I'm writing, and it just got to Dex only tomorrow, I'll pick it up, and I've already decided to pick up some supplies, in khokhlyaTskaya nature
Nothing "khokhlyaTskaya nature"! You know how girls worry when their own saucepan deteriorates ... And we try on bowls from one SV to another, looking for where to buy spare tires.
Do not think, and the native bowls are good in quality, but stainless steel is desirable if you like meat with bones. And how good it is to have more than one bowl - cooking turns into a pleasant conveyor belt, you can cook three or four dishes in 1.5-2 hours! You only change the cups!
Juli31
Quote: ukka

Have you already cooked something in it?

Nope, she's still in the store, I'll pick it up tomorrow

Quote: ukka


Correctly, I chose the pressure cooker right away!

To my shame, I don't really like to cook a lot
I would be faster, tastier and without problems
For this reason, I chose a pressure cooker.
But, I feel, the trouble of the beginning is great ... and I will not stop at this purchase ...
chaki2005
Girls, and someone has already tried stainless steel on Deksik? And, then I looked in the subject of SupercoW and did not find our CB on the first page in the list.
Talamea
Quote: Juli31


To my shame, I don't really like to cook a lot
I would be faster, tastier and without problems
For this reason, I chose a pressure cooker.

DruH

For me, too, SVshka is just a salvation. Roast or pilaf or something else is easy and simple and most importantly, very fast. It is especially cool if you urgently need to do something and the meat is in the freezer, there is no equal for SVshka.
Talamea
Quote: chaki2005

Girls, and someone has already tried stainless steel on Deksik? And, then I looked in the subject of SupercoW and did not find our CB on the first page in the list.
I threw the link, there is a stainless steel for the Brand 6050 pressure cooker, it is also suitable for DEX 40. Someone already took ours.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers