Kenwood Kitchen Machines

[IrinaS111]

IrinaS111,
At the office. website kenwood-bt. Not all discounts, but approximately half.

It is better to look for a chopper on Avito.

And if you need a lot of attachments, then it is better to buy in Germany. If you buy one there, then the delivery will be more expensive than here, and if there is a lot, then it is normal. Well, or with someone to cooperate.

I have a sens 5030, bought in January this year, half a year to him. I have a nasty habit of not keeping receipts. I have already turned the whole house over, it is not there, I haven’t found any papers at all, even the instructions, probably, were thrown out along with the box. I just didn't think that my car would break down for 60 thousand (((I wonder if you can take a duplicate check in the store? I bought it in Eldorado.

There are no problems with this. Restore in no time. In M-Video they did it to me.
Tell then how you managed to defeat the bunglers.
And everything can break, both for 6 and 600 thousand rubles.

Added on Friday, Jul 29, 2016 08:48 AM

My husband, in my absence, decided to make repairs in the hallway and found my attachments in the closet, and I promised to sell them if I didn't need them in six months. Half a year has passed, my husband swears a lot. The Internet in my village from the phone, barely creeps, tomorrow I'll try to put it in a flea market, if it works out, but I can't see the prices, my Eldorado from mvideo doesn't load. Is it possible to sell 70 percent of the price?

I would not advise, especially in our favorite Russian period before August-September :(
Theoretically, you can sell it, for 70% it is unlikely, but are you sure that you will not need them later? It is better to find an option to leave, at least tell them that they are giving too pennies now and at the moment is not the season.

[torturesru]

torturesru, thanks for the advice! I am now in the village, and my husband has no time to go to restore documents (there is no one to give a magic pendal). I called the place where they are being repaired, they need not a check, but a warranty card. I'll come and study. Then I will write in detail. I'll think about the nozzles for now, thanks.

Hello! Pavel1, and who can, advice is needed! I crawled out and ihbt, and got to you, you need a choice of KKM. 06 and 6040sens which is better? Same price. I like to cook very much, myself, it's like a relaxation from work .. I would like a good meat grinder, rolling the dough and noodles too, raviolnitsu .. Well, I cut and chopped in general. The power of the first is 1500, the second is 1200. As a husband. I understand that the difference should be big. And for a meat grinder !? And without offending members of the forum: kitschen is better, also kenwood ?? Fair??! The dough is necessary, you have to do it yourself, the wife doesn't have the strength to make it, well, she doesn't like it.

Good afternoon everyone. Finally, my dream has come true and become the owner of Kenwood Chef 096 (I walked around for 5 years, reading your forum and licking my lips). Husband finally presented !!!
Got a question. We have had a Kenwood mg 470 meat grinder for 5 years already. For this reason, I naturally did not take the attachment to the combine. Today my husband, studying the car, inserted the attachment from the meat grinder and it definitely fit. Of course, I did not let him turn on, without knowing the exact information, but is it possible? Does it really fit? That would be a joy !! Thank you all in advance for your answer!

[Ksenusha]

Ksenusha, it is better to ask the manufacturer.

But at the same time, the cube attachment is suitable for different meat grinders, including yours. So the groove is, in theory, the same.

Added Saturday 30 Jul 2016 05:23 PM

Ksenusha,

Oh, congratulations on the wonderful Kenwood!
Let it serve for a long time and please!

Girls, advise what is better than cache 060 or sens 6040 ?? Very urgent, there is no time left for a choice ...

[Vasil]

Vasil, it is difficult to advise something, very few people have experience with both models. Personally, I would take 060. Classic, and the attachments are easier to find.

Will kitsch be better than them?

Miranda, thanks a lot !!

[Vasil]

Vasil, I understand you perfectly, I have been painfully choosing for several years, but thanks to this forum, and in particular to Pavel, I recently bought 060. I am very pleased! Some nozzles have already been bought and tested, this is a solid, serious technique. In general, I did not seek good from good. At first, I dreamed of kitschen, when they were not in Russia yet, I even fired up to order from America, despite the voltage. I read American forums with very different reviews, I watched a lot of videos (including where it was "wagging" from side to side, and this is when kneading ordinary yeast dough!) And ... changed my mind, to clarify, the model studied the most powerful one. In my opinion, Kenwood is a reliable, working horse! (well, not a horse, which is only the brutality of the baits) Successful shopping to you!

[Vasil]

Vasil, read reviews for a long time, compared and went to feel, the choice fell on Kenwood after all.

There are no more nozzles, it does not jump on the table (both waving their heads). And the price + is the same, although it depends on which model to compare with Ken.

060 is a good model, slightly updated 020, there are many reviews on 020, a very popular model has been and remains.

I would also choose kenwood, I have it. And the daughter-in-law has kitsch. So she only whips them cream and dough for biscuits, and I do everything. A cube cutter for the holidays - a bucket of vinaigrette, a harvester or a hook - dough on dumplings, high-speed preparations for the winter, shredded cabbage, a meat grinder is also good (I changed the knife to a Zelmer knife), I also use a mill, I also love glasses, I use a dough rolling machine, etc. D. And the prices for Kitchen's attachments😱. Yes, and I look at him when he interferes with the dough, it seems to me that a very steep dough for pasta will be very difficult for him to interfere with (his daughter-in-law protects him, kneads with her hands). He is handsome, but it seems to me delicate.

Girls, thanks for your feedback! Why not sens 6040? Because of the power of 1200? He looks like the newest?

Added Sunday 31 Jul 2016 10:00 AM

Yes, and 060 from 30tr, and 6040 from 60 ... But there is an option to take it for 28 ... Torment of choice !!!

I don't have Kenwood yet, I'm looking closely

I would take 060 because there are metal rims in it, and in 6040 - silumin ones.

[Vasil]

Vasil, Sens 6040 comes with a meat grinder and a low-speed slicer attachment (a la meat grinder, insert such grating drums).

060 in a complete set of add. the attachment has a glass blender.

The mixers are also different in the configuration. The 060 also has a flexi nozzle with flexible rubber blades, which is an excellent nozzle. In 6040 it is not. There is a hook / whisk / k-shaped in both machines, only in 060 they are metal, in 6040 they are silumin.

As a car the 060 is better.
Add. You can then buy the nozzles you need and gradually spend money on them.

As for the price, then 060 from the officials ( 🔗) in the price is positioned for 82 thousand, and 6040 from 62. That is, this is an indicator as they themselves estimate that it is higher in class.

What the i-market 060 gives out for 35+ is either store promotions or deception. They show me only three stores with a price of 35+, of which I only know Autocoffee, the girls bought there, I see the rest of the stores for the first time, I personally would be afraid to buy there, but I am a reinsurer.

[Miranda]

Miranda, I bought in an auto-coffee, with delivery to Ufa. I liked the store, consulted, found an inexpensive delivery.

[Vasil]

I bought in autokoff

Well, I say that this store is ok, verified
And I personally don't know the rest.

Simply Vasil thinks that since Google 060 is cheaper and 6040 is more expensive, then 060 is worse. And this is just a share, 060 is better than 6040.

Rather, they are both good, but 060 is a different class from Kenwood.

I would also definitely take 060))) kitschen is much weaker, although beautiful ... I also dreamed about it for a long time, then I took cache 020, and recently I saw from my friends how it sausages on 600 or 700 grams of flour ... and there was dough soft. My 1300 whole grain dense dough kneads with a bang, moves his head, but stands still and interferes, and, by the way, does not heat up like kitsch, so it becomes even scary. And somehow he seemed to me as a whole more impressive than kitsch.

And such a handsome man came to me yesterday!

Please tell me how your Keshenka kneads a tough dough and how long does it take? Very interesting.

Girls, thank you soooooooooo! Miranda, especially! And according to the nozzles, I want a really good meat grinder, rolling and noodle cutters, raviolnitsa. Is it worth taking a meat grinder to chop the vein meat or not? Or a separate one about 2000? Already on computeruniversel I wanted to order kitschen with attachments ... Yes, but 020 is better or worse than 060? So I look, cotton wool is the same, what's the trick ???

[Vasil]

Vasil, the difference is in a blender knife and a spatula in a blender. If the price is the same, then probably 060 should be taken, when I took the difference was about 6-7 tons. and I chose 020. I do not regret at all)))

I had 020 in the middle (as I understood that now it is 060). Delightful model. I still miss his fluffy corolla. Anyway, he was very good.
I bought it at Autocoffee. On the same day they brought it.

I mean, 020 is cheaper because of something and you chose it? Are they the same?

[Rita]

I mean, 020 is cheaper because of something and you chose it? Are they the same?

Yes.

Added Sunday 31 Jul 2016 08:35 PM

Rita, the corolla is truly a miracle. I revised the recipes for many cupcakes in favor of driving in whole eggs and the result is better than it was. True, before that I had a mixer with a bowl, and I whipped the protein with this mixer plus in the same bowl simultaneously with the mixer I put the blender's whisk))))

[Vasil]

Vasil, in the sense of 020 just a wonderful model. For example, I do not write anything about attachments, because I was too lazy to buy them, and it's expensive.
Nice and amazing kneader. With one egg, just a bang! figured out in a few seconds, and the steep dough is practically without swaying.
But I didn't have much of it, so I remembered it for individual episodes. I miss you, yes.
It was easy to drag from the sofa to the table.

Added Sunday 31 Jul 2016 08:37 PM

I want here at Tanechki order a whisk. Maybe it will work out more.

Girls, why then everyone yearns for kitschen? Electrolux looks like a twin like him ... But no ... No, nooooooo .. After all, what is that ??!? Besides beauty ?? Well, I really don't understand ...

Added Sunday 31 Jul 2016 08:45 PM

Rituslya, and what, he is no longer with you ??? What did you change it for ???! And who will give advice on the meat grinder nozzle ??? As a husband, the first necessity !!! Or freestanding even so ??

[Vasil]

Vasil, for example, I don’t miss Kitchen at all. Just really. Expensive. So ... Leaf Ayu, I read, interesting. And in general I love positive emotions.
But. But I also have a small Boshik Mum 4, which I am also very pleased with. One can only imagine what older models are doing !!!
A delightful kid for small volumes. So what, if it's made of plastic ?! I regret that I used to treat the Boshiks very stupidly.

[Vasil]

Vasil, for some reason kitschen was the first to come across to me from the planetary and for a long time wanted it. Here she caught a glance ... and in general did not perceive Kenwood for a long time, I don't even know why. Apparently, she was waiting for it to become more expensive and to appreciate it more

How expensive ??? Kitchen artisan 150-here 30-35tr. There, behind the hill 23-24tr. Nozzles are the same, what is expensive ??? Kenwood is even more expensive somewhere, with induction. Kitchen's bowl is 28-30, + 30 = well 70. And 086-096 is more expensive! What is expensive ???

I scored it stupidly so as not to read it, so we have Kitchens from 52 thousand, for example, go. You can, of course, and cheaper, but not 20 thousand.
No, too lazy to read, because I certainly do not know this Kitchen.

Yes, for the action together with teapots, for 16!

[Vasil]

Vasil,

1.020 and 060 are the same machines.
Improvement only in blender. It is simply impossible for a company not to release anything new for a long time, therefore such marketing.

If you find 020 cheaper than 060, take it without looking.

2. Kenwood has no raviolnitsa.
I don’t know about the meat grinder, because I have a very good one, I don’t need such a nozzle.

The dough sheeter and noodle cutter are good.

3. Many people like Kitchen for its appearance, retro design. Although many people don't like it either for this reason, they like other designs.

It's good that the manufacturer is so holding on to the design.But on the other hand, we are already in the 21st century, we want convenience. Smooth speed change, convenient button layout, etc.

Having reviewed a lot, I like Kenwood better. In addition to the raviolnitsa, he has a greater choice of attachments. He's so thorough and stuff.

But girls are such girls, they need to be more beautiful and colorful, so sometimes they sigh at Kitchen. But not because it is better in quality and / or performance.

For me personally, I like the Kitchen design, but only the one with a 4-liter bowl, and with a 6-liter one, where not the head, but the bowl up and down, is no longer pleasant. At the same time, I originally wanted a 6-liter one. That is, I like Kitchen, which I do not need and does not fit, that's the catch

4. I don't know where you found kitsch for 30-35 thousand, the riddle is straightforward.
I see 50-60. And 6-liter in general at a price equal to the induction Kenwood, and this is not at all comparable to Kitchen in terms of capabilities.

Miranda has put everything on the shelves for you, Vasil.
And where did you see Kitchen for 16 thousand and with a teapot? ... I don’t know, but for such a price I’m sure.

Girls, and the question about the meat grinder remained unanswered ?? Who has experience, share it! And then I ran the branch and parallel. on the nozzles, who writes what .. Who g ... who knives and the norm, who is better than a separate one ?? There is a separate and not one, but a ficha in the very process of the game-creativity! Well, first of all, Avito. Complete, and rst. also. In St. Petersburg from the Finnish sea. On a computer universal. de, and with Jupiter's attachments, in the states they cost 200-300 dollars. in general .. In the balashikha bowl induction. now sell for 28 new. I myself took from the Germans the 52 day and the 6900 prima donna from the coupe - everything came out super, and it seems to me that the goods that are sold here and there are slightly different in quality .. But this is my subjective opinion ... I get it myself!

Added Sunday 31 Jul 2016 09:37 PM

Nope, kitschen + kettle for 52-56. Someone like. And beyond the hill too

I have a meat grinder attachment, everything is fine .. at first use it seemed that it could not cope, crumple the meat, I complained here, they advised me to sharpen the knife and the grate. The next time I assembled it as it is written in the instructions (do not put on the fully assembled nozzle on the screw, but assemble it on the screw), and she perfectly grinded rather stringy meat, I hammered into sharpening, I use it like this, I'm fine. But I, in fact, have nothing to compare with, before that there was a mechanical

It suits me too, for already 8 years. No complaints. I didn’t sharpen anything. In comparison with Moulinex, Keshina is better.

Miranda, and if the price is up to 32tr kitsch artisan150, but with a bowl of 4.8l, what do you choose? And even 25tr, but in black? And why a bowl of 6.7L ?? Explain, I only represent such a volume for aspic, and then for "distribute to all"? Maybe I don't know what I want too ???

[Vasil]

Vasil,

You see, I knew what I needed.
Therefore, I did not buy models for 20-30 + - thousand, having such an opportunity. Although it has been torn many times.

How to explain.
I cannot speak for others, but knowing myself, I understood that when the first joy subsides, any intermediate option will drill me. It's better for me to buy what I want right away, without intermediate options.

Therefore, at least the gray-brownish one is over 25.
Free - would take, of course. Or for 5 thousand. I would have taken it too, probably, but no longer for 10. To give half or a third of the price for something that you don't really want is to overpay. Because sooner or later I will buy what I want.

But other people have a different approach.
For example, you think that a mixer is 30-35, because they will also give a kettle as a gift. And I believe that this is 50-55 real money. With a teapot or not, I will get this amount out of my wallet and spend it. I am not at all affected by the "buy three, get a fourth for free" promotion if I initially need one.
Perhaps I expressed myself incomprehensibly above.
Outwardly, I only like the 4-liter Kitchen. And I don't like the 6-liter outwardly, because its bowl moves up and down, and not the head tilts. Wherein, both do not suit me by functionality and assortment of attachments.

I considered Kitchen to purchase only during the period when I did not know that there was Kenwood. That is, I saw Kitchen first, I liked it. But Kenwood liked it better. And Kitchen is like first love. Beautiful, in a naive period, etc. And family, love, and we will die-in-one-day - with Kenwood.

Sounds like we're dissuading you from Kitchen. But here is the Kenwood branch, where people either have it or want it. It's strange to expect a different answer, and even when your requests are quite standard. And on Kitchen's branch they will write praise about him. And they will be right.

Kitchen vs Kenwood has no single correct answer. Both machines are time-tested and commendable. The choice depends not only on money, but also on the tasks / processes that you plan to do with the kitchen. cars and add. nozzles.

***
The 060 and 6040 options you have selected have 6.7L bowls.
I assumed that you know why you need such a bowl size, otherwise you would have looked at other models.

I focus on my regular volume of proteins, which, when beaten, increase oh how. For the amount of flour for the dough. Easter cakes again.

Well, more, no less.

Beautiful, in a naive period ..... Strongly written! Thanks Miranda !!! Yes, I understand, but listening to others, the wise, and choosing the hardest thing to do! To advise and justify to someone else is easier than ever! How I will climb, ask, feel, and so on ... And about the branch-on ix.Bt they threw off about you, hoped / and found! / To find the owners of these two brands. To listen to an intelligent person is like going to church, you get relief! That's all .. Yes, the bowl is not a prince., Kitchen 20kv. Important funk., Beauty oooo, hope. Nozzles, for sure, I know myself, I will buy almost everything .. I love to cook, hobbies at home and rest, relaxation. Yes, and Sens 6040 just seemed more modern. And there are a lot of nozzles, but the power embarrassed .. And silumin .. And 084-096 is a little expensive for an experiment .. So ...

[Vasil]

Vasil, I, too, when choosing a Kenwood model, were tormented by 1200 watts, I wondered whether it was enough for my needs - cooking for a family of 4 + baking bread + cakes-cupcakes. It turned out - enough, and enough in abundance, I have a Kenwood 770, and the silumin tips are of high quality, although I'm also thinking about a hook for induction caches, but I don't know where to buy it. If the funds do not strain - take 20 (23) or 60 (63) - that's all the torment of choice)

Added Monday 01 Aug 2016 01:13 PM

m0use You also thought, if I'm not mistaken, about the "magic" hook, if you bought, then where? What's his number?

Oh, a big bowl is needed! I kneaded the dough for bread, and put it on the rise in it. For blanks for a cube and a high-speed grater, it is more convenient to substitute it. As written above, beat the whites. We need it in general. And I also ordered the second bowl
I'm sitting now and wondering if I also want a meat grinder ... I have a metal mulinex, beautiful, but the infection is heating up ... although now everything is heating (((

Hello everyone! Today I found out in Kenwood about 060 and 6040. The nozzles are the same for everyone, and not from silumin. 060 and the entire row is removed from release. There will be a sense, maybe. there is an electronic power control and a range of machines with induction. There is enough power, they say. Generally I thought ... No, there is a cover.

when choosing the Kenwood model, they tormented 1200 watts

I had a model 570, which has a power of 1000W and it was enough for me. Silumin tips do not bother at all, because they are really very high quality. I just realized over time that the bowl is too small for my needs (I make cakes for a large company for the holidays and it is not very convenient to do something in two passes) and bought 060 with a bowl of 6.7 liters. And the attachments I have used are suitable for all machines.

060 and the entire row is removed from release.

Oh, how I bought my keshenka on time

[Peter Push]

Peter Push, just the other day, crawling along the Amazon, I came across this hook. There he is.
And I'm looking for a whisk from 020 there. If everything works out with Tanechkithen the price will be more than good in comparison with our service center. In general, while I think.

[Rituslya]

Rituslya Rita, thank you, but I live in Kharkov, we do not have Amazon, I will be grateful to you if it is not difficult for you to find out the number, or as it is called, maybe the marking, of this hook. I, like you, intellectually understand that the native hook is good, kneads perfectly, but my heart desires a spiral one, well, what can you do ... I release a titmouse and catch a crane. He led us - me to "magic", you to "fluffiness" ..... kindred spirits. Eh, if they lived nearby, they would exchange corollas.

Girls, can you tell us more about the hook? How does it differ from the hook of the 020 cache? Suddenly I also need)))) he kneads better?

[Peter Push]

m0use You also thought, if I'm not mistaken, about the "magic" hook, if you bought it, then where? What's his number?

Peter Pushuntil I bought it. I'm waiting until it appears in the company store, if not, then I will order from Tanya from Ibei-Amazons)))

[Anita]

Anita, the induction hook has a spatula at the bottom, so it still rakes in the process.
Peter Push, as what I learn sensible, I will write right away. But I saw him, yes.