Dough sheeters-noodle cutters (model selection, features, reviews)

[Liliya64]

Liliya64, Lily, it's okay, it's a lubricant, many people have it.

[Seven-year plan]

Seven-year planThank you light, otherwise I was scared, suddenly broke

Girls, who has this Imperia 100 dough rolling machine? Here I looked 🔗 Sorry if I make you repeat it. ... You won't swear at me, will you? Do you understand what the agony of choice is? Themselves through them tea passed?

[Oksana]

Oksana, and what, in fact, confuses you? The empire is Italy, not China. If you like the machine itself and are satisfied with the price, take it. I think you will not regret it. Unless, of course, you need a car with a motor.

[Oksan]

Oksan, it is strange that it says 100. They usually have these numbers indicate the width of the rollers.
Imperial-150 or 180.
Could it be a print? After all, it is stated that the width is 150mm.
A mystery however ......
Although the picture shows the usual Imperia with a removable nozzle.

Light, not Imperial, but Empire. And it is in Marcato's number that the width of the shafts is indicated, for the Empire - no, there is just a model number and that's it. So everything is correct.

[Elena Tim]

Elena Tim, oh - it's the tablet itself that writes what it sees fit.
Yes, I'm just a noodle cutter. ru climbed (the most interesting was), there are either 150 or 180 or no numbers at all. They have Imperia.
And there, who knows. Understand these Italians ...

Good evening everyone!!! I am from Saratov, I looked at Markato on the site in Rostov, but the delivery is 700 rubles. There was an idea, maybe there is someone from Saratov, they could combine the order and divide the delivery, so that it would be cheaper !!!!

Good day!
Finally, I also have a dough sheeter TODAY !!!
I'll tell you about the agony of choice:
At the beginning of autumn, my husband and I went to the METRO, there is some kind of Gastrorag ... I show - like, I want one on NG ... My husband says: why are you suffering? Take it straight today! But I am not yet ripe ... No, I say, I want to go to NG!
And now the New Year is coming soon ... I'm on the Internet - shoveling information ... I looked here and there ... there is little information in the Internet stores ... there are no reviews ...
Forums babble something like "oh, what is this? Do you have a thread?"
But it was not found! And how many! And Ka-a-ak !!! In a few days I have studied from a hundred pages ... I would like, of course, Atlas, and with a motor, and a couple of attachments with raviolki, and also nyoshnitsu ... Even my husband participated in the choice, he believes that it is necessary to take an Atlas with a motor and raviol a nozzle ... and the prices are bite! With this spree of the course, you can't do it at all !!!
A year ago, also under NG, I ordered myself a Hawos mill (for bread) and a grain grinder (for muesli) all together for 15 tons ... so yesterday I stumbled upon one of the sites on my grain mill ... it is one 20 tons . R.!!!!!!!!!!!!!!!!
And now the money is still tight ... Having suffered pretty much, I ordered Gastrorag with a ravioli attachment through the Internet ... My husband went to pick up the order - and dissuaded me. He didn’t like that the filling was put directly on the dough, and no funnel was placed on top at all! and rollers in the raviolish nozzle - WOODEN !!! suspicious ...
I'm back to the forum ... I was tormented, tormented, and decided to get by with Gastrorag qz-180, which is solid, 18 cm wide and with noodles 2 and 6 mm. There are also plans for their motor, but before NG could not find it at a reasonable price (on one site for 5000r, more than a little !!! - almost like an Atlas !!! And where 2000-2500, there "will be brought after NG"
There is almost nothing on the forum about Gastrorag ... so, I think, I myself will try to "shed light" on them!
I have an electric meat grinder of this company and a bunch of pots and pans from stainless steel.No complaints !!! They position themselves as for small businesses, but at an affordable price, and some models are closer to household ones (for example, small meat grinders and thermo pots).
And today I finally brought it (the dough roll) !!! True. I had to drive 2 times - the car with the goods got confused in traffic jams, and the company assured me that they had already brought me to the pick-up point ... Well, I also got stuck in a traffic jam with the car (instead of 30-40 minutes I drove for 3.5 hours! !! Burst into home, drank some tea and rushed for flour !!! As the saying goes, "Hunting is worse than bondage"
I bought flour "Granmulino" VS, "Melnikoff" 1C and "Molino Grassi" semolina from hard varieties (it is like a small grain, and costs 125 rubles per kilo).
I returned already after midnight - and to the forum !!!
NOW I WILL EXPERIMENT AND LEARN !!!!

Oh, I completely forgot about the price ...
On the website, it (Gastrorag qz-180) cost 1850r + 80r delivery to the pickup point ... but I was also given a 500r discount! In total, the machine cost me 1430r !!! Which I consider very successful in the current economic conditions! And even if she does everything "not for 5", I will not be very upset. For that, I will try it out on my own experience, I will understand to what extent I really need it, and ... there will be something to strive for!

With the choice of the noodle cutter, I delayed a lot and waited for the exorbitant exchange rate. As a result, I bought a trial version of Deco. Naturally made in China, however, everything is even very nothing! Cuts spaghetti and fettuccine, it turns out clearly, does not slow down. She also seduced a friend, she has a raviolnitsa, but she does not use this attachment, because it turns out an obvious discrepancy between the dough and meat. The girls came to the conclusion that China can sometimes be used without disappointment.

Hello everyone, everyone, everyone !!!! I'm new here, can I join you? Last weekend I bought a gefu mold for ravioli, made the dough in a food processor in 21 seconds (I don’t remember who to say, thank you very much for the advice). The turn came to rolling out the dough ... I gave my husband a rolling pin, after half a minute he freaked out, I had to roll it out, and he played with the form. But he approved the purchase of the machine. I spent the whole week at work on this site - I read the topic from the very first page, but I still did not decide for myself until the end what is the point of atlas 180 in a removable nozzle? Maybe it's more convenient that noodle knives are higher than in an ampia? Can you tell me how convenient it is to get the noodles from under the knives? And another question: in one video, when you turn the handle on a removable satin nozzle, the nozzle itself twitches - as if it is about to fall off its ears - do you have such a problem? Thanks to all.

If the Atlas is well bolted to the table, then nothing "jerks" anywhere and the nozzle is very tight

[evrika_ea]

evrika_ea, I really have an Atlas with a motor, but it stands firmly on the table, and with a handle I have not tried it, somehow too lazy to twist

[evrika_ea]

Spent the whole week at work on this site

evrika_ea, But actually, what else to do at work ???

And my agony of choice is finally over. I ordered an atlas-150, without a motor (I'll buy it rich). I exhaled ... Waiting ...

I also ordered Atlas-150 last night, but with a motor. Rostov site. The truth is not yet called back, probably tomorrow.

I also ordered Atlas-150 last night, but with a motor.

Lena, what is it worth?

Rostov site.

Too little to Chelyabinsk. And they will send me from Ulyanovsk.

Oksana, 8990. If they are not lying, the price is about 12 in Moscow. And in Ulyanovsk how much with a motor?

🔗 Help me figure out how to buy here, what price to watch (there are 3 of them, one crossed out)? And if anyone has a discount, please.

[evrika_ea]

evrika_ea, 77 €. When you leave the site, they regret that you did not order anything and give a discount.

[Katris]

Katris, they don't worry about my leaving

Oksana, 8990. If they don't lie,

Lena, I also wanted to write from here at this price- 🔗... Called it turned out that almost 12 thousand. Found in "Soroka_belobok" (I already bought something there) for 5800 (without a motor) On that site, this option is written 46oo, but again next to the BUY icon it says "find out partner prices". This means the real price will be more expensive. She didn't even call, spend money. And I also bought a press for cookies from Markatovsky, it will be cheaper than on that site. And for sending me what is there, what will have to pay

[Katris]

Katris, Kaaaat about my leaving, then wA did not worry ...

Lena, I also wanted to write from here at this price- 🔗... Called it turned out that almost 12 thousand. Found in "Soroka_belobok" (I already bought something there) for 5800 (without a motor) On that site, this option is written 46oo, but again next to the BUY icon it says "find out partner prices". This means the real price will be more expensive. She didn't even call, spend money. And I also bought a press for cookies from Markatovsky, it will be cheaper than on that site. And for sending me what is there, what will have to pay

Oksan, as soon as they call me back, I will find out the exact price, if it differs from the price on the site, I will not take it, I will look for more.

[evrika_ea]

evrika_ea, then you can subscribe to news. Enter an email in the gray rectangle on the main page, click OK, and you will receive a discount code. Discounts are approximately the same and cannot be summed up, so you can use any one. They also sent me a discount code in the parcel, but I can't find it, I probably threw out this piece of paper.

I'm on marcato. com ordered atlas 180 invoice was sent, the price did not differ from the site. And the bill from IP Dyachenko came. This is normal? Who bought there please respond

And yet I doubt between atlas180 and ampia 180. Experienced users advise. Can the detachable attachment be easier to clean? or the fact that it is higher - it is more convenient to get noodles? Your head is already spinning, tell me

I have two dough sheeters from the same company. one is monolithic, the other is removable. So, there is no difference in cleaning! I personally think that a non-removable one is convenient, because you do not need to find a block in the bowels of a kitchen cabinet and then hook it up and remove it at the end of the work.

And I'm comfortable with removable attachments. Today I rolled the dough on dumplings and didn't wear it for noodles

And I, even if I only roll the dough, do not remove the noodle attachment. The dough layer fits comfortably on it. I never took it off at all. So, in my opinion, you can buy a monolithic one if you are not going to buy additional nozzles. And if the price is cheaper.

I'm on marcato. com ordered an atlas 180 the invoice was sent, the price did not differ from the site. And the bill from IP Dyachenko came. This is normal? Who bought there please respond

I was buying...
yes, the account on the individual entrepreneur Dyachenko Ruslan is fine ..

: ded_m: Good evening everyone. I've been reading the forum for three years already, a lot of recipes came in handy, and I read reviews on household appliances. So Marcato Motor150 also ordered on the website 🔗 .
I will write here about a small overlay that I got when ordering. For those who will order, I think it will come in handy :))
So, I ordered an Atlas motor150 and a raviolnica (a discount for 2 things was given 2 euros, not 2%), for registration on the site - another 5 euros, in total with delivery it turned out 154.10 euros.
And now the most important thing is that when you receive a letter from the store, carefully look at what company they are sending, at first I did not pay attention, because here they sent an EMSpost to everyone, well, I think it’s the same for me. How! They sent me TNT express, they do not work with individuals in Russia. I called TNT, they confirmed, they said write to the store, maybe they haven't sent it yet, they wrote, asked to send EMS. I'm waiting for an answer, but on the nose is Catholic Christmas :)) They replied on December 24 that I was right, and that they would send EMSpost. I'm waiting for the tracking code to be sent. Sorry that there are a lot of letters. I hope their holidays are over and I will get everything.

And if anyone has a discount, please.

vrika_ea, 77 €. When you leave the site, they regret that you did not order anything and give a discount.

they didn't worry about my leaving ...

to be worried and send a discount, you need to register with them or subscribe to news. Where should they send the discount if they don't leave mail? Probably "to the village, grandfather"
A discount is sent if there is something in the basket, and you left the site. That's when they get upset))) And in order to add to the basket, you need to register ...

So, I ordered an Atlas motor150 and a raviolnica (a discount for 2 things was given 2 euros, not 2%), for registration on the site - another 5 euros, in total with delivery it turned out 154.10 euros.

Especially now I went in and threw goods into the basket. for 5 products a 5% discount (4-4%, 3-3%, 2-2%), as I wrote, for registration, or for a subscription is also 5%. Look at the prices carefully. A discount of 5 euros can be only if you have goods for 100 euros, then 5 euros is 5% ... And this is already from the cost without VAT. I can't say anything about delivery, I was sent by default EMC. I ordered from the Italian version of the site, but I don't think it matters.
I wish you an early receipt

I want to show my assistant, or rather, what we did with her! It's not electric, but we sang it! At least some kind of charging for me
Made spaghetti hollow inside from beet / carrot puree !!! Help yourself!!!

and then I, like that at the next viewing of the site and the cars said aloud ... "Damn well, would have fallen from somewhere .. money for a typewriter?"

Just imagine the same thing, in the inner pocket of the jacket which I put on only in the courtyard of the house (we have a private one) I found today 2000 I don't even know where they are from. At work today they found out that they had miscalculated my bonus for 2 months, today they threw off a shortfall on the card (I did not immediately understand this at first I had a vacation, immediately after it I was on sick leave with my son, I was surprised of course that it was not enough, but did not understand, I thought that because of the sick leave). Tomorrow I pay the bill I opted for atlas 180

Good day to all and Happy Holidays. Today I finally took a 180-degree marcato with a motor.
I had to pick it up myself from the pickup point for 100 km + delivery cost 1030.

I remain unconvinced about 🔗 .... I do not recommend contacting this store
Perhaps it's not the entrepreneur Ruslana himself, but the careless managers.
+ one, the technique is still from Italy

[Alex100]

Alex100, have you chosen an ampia or an atlas?

[evrika_ea]

evrika_ea, atlas, there is also a double noodle cutter in addition

[evrika_ea]

I pay the bill tomorrow

evrika_ea, well it is necessary !!!! super ... how can I understand you ...

[Divna]

Divna, I will say even more - a girl just called from work, the director signed another award for everyone for the new year, - I did not expect this at all

abaldet is a direct New Year's miracle !!!!

I continue to sniff and choose between Marcato and the Empire. The Empire has a declared thickness of 0.2 - 2.2 mm, while Marcato has 0.6 - 4.8 mm.
Experienced, help please explain:
1. Why do I need a thickness of less than 0.6 mm (in other words - do I need 0.2 mm)
2. Why do you need a dough thicker than 2.2 mm (I have never made dumplings and dumplings on my own, I suppose that a thick dough is for them, but I'm not sure, the girls seem to cope with the Empire ..)

In general, enlighten, please ... The more details, the better ...

[Yulia Antipova]

Yulia Antipova, I have marcato, dumplings for 6 rolls (9 in total), I made pasties and tasted for 9 well, very thin, I think 9, that is, 0.6 mm is suitable for filo dough. And 4.8 mm for initial rolling is convenient and it looks like the thickness of the pies, although it may be a little thin. Thinner than 0.6 is also "filo", maybe, and there are also such puff cakes.

But it didn't work out for me with the order. There are 8, in fact 11 rubles on the site. I am not yet ready morally to give that kind of money.

I continue to sniff and choose between Marcato and Empire. The Empire has a declared thickness of 0.2 - 2.2 mm, while Marcato has 0.6 - 4.8 mm.
Experienced, help please explain:
1. Why do I need a thickness of less than 0.6 mm (in other words - do I need 0.2 mm)
2. Why do you need a dough thicker than 2.2 mm (I have never made dumplings and dumplings on my own, I suppose that a thick dough is for them, but I'm not sure, the girls seem to cope with the Empire ..)

In general, enlighten, please ... The more details, the better ...

Julia, I'm certainly far from the master, I'm just learning with a typewriter, I have a Marcato 150
Position 9 - 0.2mm is very thin, I made noodles when it dried up, it became like glass - everything crumbled, now I do it at 8, it's true, too, thinly, but when you boil it seems to be normal, I also made pasties and dumplings at 8, only two positions and tried it out.
In general: it's so cool - a car

: ded_m: Good evening everyone. I've been reading the forum for three years already, a lot of recipes came in handy, and I read reviews on household appliances. So Marcato Motor150 also ordered on the website 🔗 .
I will write here about a small overlay that I got when ordering.For those who will order, I think it will come in handy :))
So, I ordered an Atlas motor150 and a raviolnica (a discount for 2 things was given 2 euros, not 2%), for registration on the site - another 5 euros, in total with delivery it turned out 154.10 euros.
And now the most important thing is that when you receive a letter from the store, carefully look at what company they are sending, at first I did not pay attention, because here they sent an EMSpost to everyone, well, I think it’s the same for me. How! They sent me TNT express, they do not work with individuals in Russia. I called TNT, they confirmed, they said write to the store, maybe they haven't sent it yet, they wrote, asked to send EMS. I'm waiting for an answer, but on the nose is Catholic Christmas :)) They replied on December 24 that I was right, and that they would send EMSpost. I'm waiting for the tracking code to be sent. Sorry that there are a lot of letters. I hope their holidays are over and I will get everything.

Good day! I am also ripening for a typewriter, I went to this Italian site. For some reason, the amount with delivery turned out to be 177 euros, of which delivery was 55. And I also chose the Atlas motor 150 and the raviolnica. What's wrong with that? And I can't see where to choose a delivery service.

And are there any restrictions on the amount if you order in Italy - so as not to mess with customs?

Good day! I am also ripening for a typewriter, I went to this Italian site. For some reason, the amount with delivery turned out to be 177 euros, of which delivery was 55. And I also chose an Atlas motor 150 and a raviolnica. What's wrong with that? And I can't see where to choose a delivery service.

I ordered in December, then there was a 19% discount on Atlas Motor150. Now she is gone.

You cannot choose the delivery service yourself, unless you write a letter, I saw what mail they send when I received a letter from them.