Hand Blender Steba MX 21

[Bijou]

Bijou, worked. I managed to whip milk for coffee and make cottage cheese with a banana in a grinder. At first I thought, maybe I’ll get used to such a button or develop it, it turned out not.

[Catherine___]

Catherine___, well, if you fail to return, then you will do everything like me - on the Turbo button.

BUT I was out of luck with the buttons, which they wrote about here - sooo tight, especially the upper ON button. It turned out to be impossible for her to work for more than 10 seconds, she has to press with great effort, if you loosen a little - the work stops.

Everything is as many here wrote, including me. I also have it collecting dust, and no attachments are happy with such buttons, and the old dying Boshik is now working for two, although it was assumed that he would retire. My turbo is also hard to press.

I did not wait for "the grace of nature", and adjusted the button on the blender myself.
The advice was good how to fix it, it seems in this thread.
I lifted the rubber base, and glued a plastic patch to the button, and put the rubber base back in place.
Blender works TTT.
The problem is that the button is deeply located.

If the advice is so useful. then I will take it to the first post!

[rasti]

if not replaced with another, then it will also have to improve itself.
rastiis the button easy to press after that?

[rasti]

rasti, and I twisted and twisted with a screwdriver, and did not understand why it was necessary to tear off the case from the case - either only the button itself, or the whole gum at once. And she looks glued.
Tell me, pliizz ...

I am the owner of this unit. At the moment, everyone is satisfied except for the button. But I found a way out, maybe it will be useful for someone
Gently use a small screwdriver or some other pry tool to pry the edge of the rubber patch over the top button, turn it out slightly and insert a round of a suitable size there.

All! We carefully fill the gum back with the piece of iron, it becomes much more convenient to use.
The round from a push pin with a plastic knob is ideal - break off the sting, cut off the excess plastic. I also dabbed instant glue just in case.

Five minutes of simple manipulations eliminates quite a lot of inconvenience

Lena, here you can see well

Lena, here you can see well

Tkhuty ... When I read it, I was from another computer, it did not show pictures there. I also think - what a fine fellow, neither show you nor chew better!

Thank you Maria!

So I did all the manipulations indicated in the photo. Only instead of a button I used a plastic thing, well, I don’t know what it’s called, this is for furniture nails, so that the hat would turn out wider.
I'll take a picture at home, if necessary.
And I slightly greased this thing with glue Moment ... for reliability.
The button now responds to the slightest press. Now I don't spoil the manicure.

[rasti]

rasti, yes, take a picture, if not difficult. And then I already think what to stuff like this under this button

rasti, yes, take a picture, if not difficult. And then I already think what to stuff like this under this button

Take a photo, only tomorrow, today I'm going to the jam day.
And yes, I have never posted a photo on this forum yet, maybe I will need help.

I photographed a figurine that I used as an overlay for the button.

[rasti]

rasti, great! This is a washer for furniture studs. And curvy!

rasti, great! This is a washer for furniture studs. And even curvy!

The best thing about this washer is that, unlike the end button, you don't need to cut anything in it.I just lifted the rubber pad on the blender, and slipped this washer onto the button (for greater reliability, you can glue the washer with glue), pushed the rubber pad in place. The whole manipulation takes a few minutes.
In my opinion, the Steba blender is well worth it, great machine. And what is considered with the steel bowl of the squalor. How many liters of tkemali this year these two devices helped me to make ... and jam.

[rasti]

rasti, Thank you! Well, that's it, now I'm ready - if they don't exchange, I'll bring it to my mind myself

[Catherine___]

Catherine___, why exchange now? Is it that easy? Where is the guarantee that you will not receive the exchange again with a tight button?

Catherine ___, why exchange now? Is it that easy? Where is the guarantee that you will not receive the exchange again with a tight button?

Most likely it will. There, the button is not designed for manicure ..... to see long, beautiful nails in Germany is no longer fashionable

it is very difficult to press there even without nails. It's just that some press normally, so you may not have to fix anything. Well, I have already passed it, so for now it only remains to wait for the result ...

[rasti]

rasti, but I was lucky. My buttons are normal. I only learned from here that there could be such problems.
And I really like this blender!

And I really like this blender!

Yes super blender.
And the fact that his leg is long and iron is very comfortable. So I interfere with them in a steel bowl of a squash, right during cooking.
And the shredder is constantly in use (if you have a combine). A couple of chicken breasts for cutlets and onions in them. Fast and wash less.
And a whisk to beat one egg quickly.
Always at work.

The blender, which I handed over because of a tight button, was repaired. Now they offer to either take it out of repair or return the money. Now I'm thinking, should I pick it up or add and take bamix m160deluxe? What do you think? Is it worth paying extra for bamix? Is it much better considering it has a smaller chopper and no whisk?

[Catherine___]

Catherine___, it's up to you to decide what you want more)
many are not happy with bamix, so there is no perfect blender))

[Catherine___]

Catherine___, How are you? What did you decide with the blender?

I decided to leave the staff. After the repair, the button became easier to press, so I took it back. While I'm happy with everything, I most often use a grinder and whisk warm milk for coffee. I tried to make a milkshake from frozen milk, which is still not very successful

[Catherine___]

Catherine___, Well, that's good))
You can handle the frozen milk. practice is needed)

I also want to revive Steba in my own eyes: put it under the button, but as luck would have it I can't find any handy material. You need to connect your husband, he has a better head in these matters

You will still laugh - I battered the entire pad with an old knife with a broken tip, but I did not manage to tear off anything.

[Lena]

Lena, it means I was not picking up there.
Why don't you ask your husband? Why pick up yourself?

Isho what ... Let the husband come to his favorite technique while it is still working. Yes, even if it breaks, and then I run in circles around them with my husband and flap my wings - oh, you clicked in the wrong place, look, it's not so drawn on the Internet !!

I just didn’t drive in - should the pad be torn off right along the border with the body iron, or does it unfasten itself there in the area of ​​the buttons?

I just didn’t drive in - should the pad be torn off right along the border with the body iron, or does it unfasten itself there in the area of ​​the buttons?

From under the insides it is necessary to pull it out.

Good day! Hostess, I need your help!

I became interested in blender because of the large number of attachments, read your reviews here and wanted to watch it live. While looking at the store, several questions arose. Unfortunately, I included it without installing the knives. (Before that I used the old model Braun, now they don't do that). So:

1. In the "leg", in the place where the knives are put on the shaft, in the store copy the gasket loosely adjoins the shaft.When the knife is installed, does it fill the space between the shaft and the spacer and is everything tight or does it stay like that? Does water and food get into the "leg" under the pad?
2. Perhaps it follows from the first question: the shaft dangles in the "leg" (without a knife) - is this normal? Does the problem go away after installing the knife?
3. When turned on without a knife (with a "leg"), it emits a high sound (almost beeps), in turbo mode there is no such sound (or vice versa, I don't remember)
4. How reliable and convenient is the swivel mount of accessories to the motor? Doesn't it get loose during operation? Brown has two buttons.
5. The lid of the chopper bowl was frayed - so did everyone?

I also want to revive Steba in my own eyes: put it under the button, but as luck would have it I can't find any handy material. You need to connect your husband, he has a better head in these matters

I put on a button from a man's shirt. Everything works great.

Lord, what kind of blender is this, which you buy, pay for it, and then also peel off with buttons.
I'm wondering, did the designers of this unit try to work with it themselves? Why should people suffer?
And I also wanted to buy it ...

All buttons worked fine for me from the very beginning.
I really like him. The presence of additional attachments is very helpful.

[Elena Tim]

Elena Tim, this is only for some instances the button is pressed tightly, but not for all.
I worked with this blender and everything was fine with the buttons)

And I have no problems with the buttons.

The blender is good. The tight button was the only problem. And so, cocktails and milk are whipped very well, a thick, stable foam is obtained. A long leg is a plus for me. You can whip with a blender in high containers, the old one did not reach in height.

[Elena @@@]

Elena @@@, and how you whip milk for froth in coffee? I am interested in milk temperature and quantity?

[Elena @@@]

Elena @@@, and how you whip milk for froth in coffee? I'm interested in milk temperature and quantity?

I can answer from my own experience.
Until I had a cappuccino maker (it's a sin, I only like to poke at the button), I whipped cold milk with a blender, per cup, so I won't say the exact amount.
The milk was whipped perfectly, just the principle had to be grasped. When you start whipping, hold the nozzle a little obliquely.
Yes, milk is the simplest, Ashanovskoye branded, protein 3.0.
And further. They whipped the milk cold, purely because there is no time yet to warm up the milk.

[rasti]

rasti, here Ashanovsky yoloko whips perfectly!
I just take it))

[rasti]

rasti, here Ashanovsky yoloko is whipped perfectly!
I just take it))

At one time I tried a lot of milk, and I realized that Ashanovsky is the best (in my opinion) for whipping. And now I'm taking it for the cappuccinatore.

[Elena @@@]

Elena @@@, and how you whip milk for froth in coffee? I'm interested in milk temperature and quantity?

Either for a cocktail, as already mentioned here, chilled in the freezer, or warmed up to 40 degrees for coffee. Either a cup or a nozzle should be slightly tilted. Beat at minimum speed with a flat disc.

Good day. Please help with advice. I got a Steba MX 21 yesterday especially for my mother as a gift. I myself did not have experience using such a technique. I wanted to clarify with you.
1) When turned on, the drive itself sounds normal:



But with the foot, the sound worries me, a high-frequency sound is heard (especially when it spins by inertia after the drive is turned off) and sometimes incomprehensible overtones skip.


2) And another moment, this part of the leg(marked in red in the photo) it gets warmer during operation, in general it is clear that 15,000 revolutions and friction can give such an effect.

Tell me this behavior is typical for this blender and blenders in general? Or is it a manufacturing defect and should I return this copy? thanks for answers

[Evgeniy]

Evgeniy, we will wait for a response from users.
I slightly edited your post so that both the photo and video can be seen.

[Evgeniy]

Evgeniy, now I will turn on my own, listen, touch where you are warming up, and unsubscribe.

[Masinen]

Masinen, Thank you for efficiency. Do you use these products yourself? What can you advise?

Added on Tuesday 22 Mar 2016 12:09 PM

gala10, Thank you. I am waiting and very grateful for your response!

Everything is exactly the same. And the sound is similar, and quite hot in the indicated place. I have had this blender for quite a long time, about 1.5 years, I probably use it often and am very happy with it.

[gala10]

gala10, Thank you!

[EvgeniyCh]

EvgeniyCh, Mine is also warming up in this place. And the sound is the same.
Mine is already the fourth year, works flawlessly.