Love.
Antonovka, I’m not a man, but I’ll calm down, understands and is not difficult, mine was disassembled and, on the advice of sazalexter, they removed the board and soldered it, this after they said in the service that it was beyond repair, it has been working like new for more than a month now.
Antonovka
Love.,
Love, thanks! If only everything worked out, I couldn't get enough of my assistant and ruined her myself
Love.
Lena, I wrote, they made a soldering and decided to clarify, only one contact was soldered, I did not like the color, and the rest were simply wiped off with alcohol, which is what your husband is going to do, although the son-in-law took pictures of it step by step, he transferred the pictures to the laptop and if there were any questions he looked at the pictures.
Antonovka
Love.,
Maybe my only vodka will be enough (no alcohol) Thank you
Jefry
If with vodka, then you need to immediately blot with a paper towel and dry with a hairdryer before turning it on. Indeed, in Moscow pharmacies do not sell alcohol? We have it with boric acid, called "Medasept".
Antonovka
Jefry,
Zhen, we only have boric acid or boric alcohol. Once I looked - there is a small degree (Less than vodka
sazalexter
Previously, IPA for glasses was sold in household stores isopropyl alcohol, but if you find it, then what you need
14anna08
Quote: Antonovka

Jefry,
Zhen, we only have boric acid or boric alcohol. Once I looked - there is a small degree (Less than vodka
is, is. in the pharmacy, ask for injections to wipe cotton wool, there is what you need. and is called exactly like, as Zhenya said. I threw out the bottle so I would write the name for you.
Creamy
And recently it was even more interesting for me with the PMM. An icon appeared on the screen that the salt has run out. I was waiting for this, since the salt fell asleep a year and a half ago (we have very soft water, the salt consumption is set at one). I fell asleep with a new pack of salt in large round tablets. The salt-free indicator stays on. I thought the salt took time to dissolve. 4 days have passed, and the indicator still shows no salt. It strained and intrigued me at the same time. I took out huge tablets with sugar tongs and poured salt from another package, which was in granules. And the PMM immediately stopped signaling the absence of salt. But the salt tablets are branded, specially designed for PMM. Now I don’t know where to put it, salt the soup, or ferment the cabbage with this super refined salt in huge tablets.
sazalexter
Creamy Mix it with fine salt and slowly "feed" the machine
Creamy
sazalexter, thanks, I also think that salt in granules should be poured down, and a few tablets should be put on top.
Jefry
Quote: Antonovka

Jefry,
Zhen, we only have boric acid or boric alcohol. Once I looked - there is a small degree (Less than vodka

the bubbles are like this

and in our area such

Antonovka
We have nothing in our pharmacies with a strength of more than 2 degrees Works !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! The husband took off the button) says one to one as on the keyboard) and everything works
Yoda
I wrote about EDESA PPM glitches. After I slightly turned off the water supply tap (that is, reduced the pressure), there were significantly fewer defects in her work. I want to observe, I wonder - is this a pattern or an accident?
Natala30
Help me please!!!
I have SIEMENS SR64E000 for 4 months. When I read this forum, I realized that I did a lot wrong, but ... I constantly used pills, then the finish, then the somat. For all the time I have used one pack of salt. Everything worked well, but sometimes I could open the door while the PMM was working and take something that I urgently needed ... And somehow, after this "opening", my AquaStop light came on.And not only lit up, but blinked. The instructions for the PMM say that this water got into the safety valve. What is this, I do not know. Said to call the SC. But the trouble is that I live near Kiev, and with the current weather and even on the eve of the New Year, not that no one will come to me, but will not even talk about it.
If anyone can, help me, what can you do yourself and can you?
Jefry
Quote: Natala30

Help me please!!!
If anyone can, help me, what can you do yourself and can you?
Don't panic!
The machine must be tilted forward 45 degrees so that the water that gets into the sump flows out.
Natala30
Thank you so much! So, sir .... I went to take it out (I have it built-in) and tilt it ...
What can I say .....: (I tilted it 45 degrees and 60 degrees, the water ran into the pan, but the machine also blinks on Aquastop ....: cray: maybe it needs to dry out somehow ...
Natala30
What can I say ..... Sadly, I tilted her 45 degrees and 60 degrees, the water ran into the sump, but the machine also flashes on Aquastop ...
What should I do?
Stafa
It was so with me. First, the water was drained from the pan by bending the PMM, then
Regeneration of the protective function of AQUA-STOP:
If the AQUA-STOP safety device has tripped, turn off the water supply tap to the unit, disconnect the inlet hose and unscrew AQUA-STOP until it clicks, which will mean that the device is ready for operation. Then screw in the device as far as it will go, replace the inlet hose and slowly open the water tap to the washing machine or dishwasher.
Anna1957
I also have sadness. I have a Candy-trio - stove + oven + dishwasher in one bottle. For 3 years I did not know grief, but today the oven suddenly turned off at the time of baking the pie. In this case, the glass ceramics heated up normally and the dishwasher turned on. I ran to a neighbor to continue baking, returned to pick up the cake - the oven turned on, the cake was baked. Later I put the ham in the oven - it also turned off ahead of time, but not critical. Further it gets worse. I loaded the dishwasher - after a few minutes there was a signal, and through the closed door, water flowed onto the floor. Turned it off, turned it on again - it seemed to work. It squeaked again, water started flowing again. I turned it on again, now it worked fine, but usually steam comes down when I open it, and now there is barely warm water on the dishes.
And I don't know what to do with the oven. It seems that no one has such here.
The oven switches on normally again
Yulyashka_M
Hello everyone! Almost 2 months ago we bought our first ARDO dishwasher. At the first loading of the PMM, approximately 140 ml of Finish Rinse Aid was poured, as indicated in the instructions. When poured, they spilled a little into the car, but wiped everything off. So - all these 2 months, and we wash the dishes every day, in the PMM there is foam at the bottom and you have to run the car in a quick wash to rinse the dishes. I do not know what to do. I like the machine, it washes the dishes well, but this foam! Is this all due to spilled rinse aid? And how to get rid of it now? Hadn't he washed himself in so much time? Or is it some kind of malfunction in the car? By the way, the rinse aid indicator has been on for a long time, and the foam continues to form. I use Finish powder as a detergent ... Help with advice. Thank you!
Love.
If I put the powder at the rate, but the foam also remains, and even if there is no foam, then the smell of the powder remains, so I put in half as much. And the rinse aid also sometimes spills by, I don't even wipe it.
UZhanka
Dear forum users! I have been the owner of Beko 6830 Extra for 2 weeks already - and suddenly today it stopped turning on!
The point is the button, which is not fixed in the on position, flies back ((((
Now we are going to the service center with her?
sazalexter
UZhanka Sorry to the service.
ksyha076
Hello. Recently became the owner of the PMM BEKO DIS5831. Everything seems to be fine, washes. dries. but somewhere I read about a factory defect - the rocker arms at the joints are poorly glued. I looked - and I also have such cracks.I don’t know, maybe it should be so? It does not affect the quality of washing (yet). Can you please tell me who else had this? The machine is under warranty, but the service center told us to call the BEKO hotline.
Jefry
It's strange, a pretty penny piece. Could have changed without looking. Or take and glue it.
* Anyuta *
Somehow they began to complain about Veko suspiciously .. then there were most complaints about the boshiks and now the Veko-shki are "pulling up"
Irianna
I am using the fourth year of the CENTURY. The top sprinkler stopped spinning, the quality of dishwashing became worse. The lower one spins and sprays water under pressure, the upper one (clean, not clogged, spins manually) stubbornly refuses to spin, water pours out of it. The master offered to take the machine to the service, pay half the price of the machine, What causes of breakdown are possible, can someone tell me
Jefry
Quote: ksyha076

I looked - and I also have such cracks.
Yesterday I was at my sister's and specially looked into her Bekoshka. Unscrew the upper rocker - at first glance there is a gap. Upon very close examination, it is not there.
sazalexter
Quote: Irianna

I am using the fourth year of the CENTURY. The top sprinkler stopped spinning, the quality of dishwashing became worse. The lower one spins and sprays water under pressure, the upper one (clean, not clogged, spins manually) stubbornly refuses to spin, water pours out of it. The master offered to take the machine to the service, pay half the price of the machine, What causes of breakdown are possible, can someone tell me
Somewhere I heard the halves of the rocker arm are badly glued, there is a gap, so the pressure falls through it.
julifera
Quote: * Annie *

Somehow they began to complain about Veko suspiciously .. then there were most complaints about the boshiks and now the Veko-shki are "pulling up"

I don’t think it’s all over the place.
* Anyuta *
Well, in short, here and my Bekosha began to jam ...
I noticed the day before yesterday .. and yesterday it happened again .. I describe the situation ...
Model BEKO DSFN 6530
Installing program 1 (Express - 20 minutes) ..
The program starts working and ... gets lost in time ...
The display shows the countdown in reverse order .... (in brackets I indicate the time from the timer, which I started with the start of the machine)
20 minutes-19 minutes-18 minutes-14 minutes - 13 minutes (16:10) - 12 minutes (15:20) - 12 minutes (15:20) - 11 minutes (13:14) - 10 minutes (12:30 ) ...... from 10 minutes the machine jumps to - 24 minutes (11:37 - restarted the timer for 24 minutes) ..... I did not track the time here .... 10 minutes just passed approximately "correctly in time ".... from 14 minutes the following began .... - 14 minutes (10:09) - 13 minutes (10:00) - 12 minutes (15:20) - 12 minutes (08:58) - 11 minutes ( 07:58) - 10 minutes (07:01) - 09 minutes (06:01) - 08 minutes (05:02) - 07 minutes (04:02) - 06 minutes (03:03) - 05 minutes (02: 03) - 04 minutes (01:03) - 03 minutes (00:03) .. the timer (24 minutes) has already expired I start an additional stopwatch ... it gives me until the end of the program + 3 minutes 18 seconds

In total, at the express wash, the soap machine is 8: 23 + 24: 00 + 3: 18 = 35 minutes 41 seconds ..
At the same time, the drying time was not displayed on the display (although it should) .. but it started 10 minutes before the end of the program according to the PMM timer .. the "washing" indicator was on all the time ..
What is it? Brain glitch? The machines were bought on 06.03 .. the delivery was on 08.03 .. So 2 weeks have already passed. Does it make sense to return the car or what to do with it?
sazalexter
* Anyuta * Contact the service. I met a similar thing with other PMMs when the heater dies.
* Anyuta *
Quote: sazalexter

* Anyuta * Contact the service.

So 2 weeks have not passed yet .. can I return to the store? Beko has already written to the website ...
sazalexter
* Anyuta * It all depends on the store, where they change it right away, I returned it through the service act.
* Anyuta *
Quote: sazalexter

* Anyuta * It all depends on the store,

I took it in Mediamarkte ... I will call them today ... I think that the situation ... like "improper operation" will not slip through ... because this is "electronics" buggy! Okay ... I was waiting for your answer ... I went to look for the store phone number ..
Jefry
Quote: * Annie *

Thank you .. I am determined .. so somehow I don’t worry too much ..
Is the machine connected correctly? Is the outlet normal and heavy duty? This is exactly the effect that can be achieved after a short operation of the machine through a cheap Chinese extension cord. There was a precedent in this thread.
* Anyuta *
Connected correctly. The house is private. The socket is normal. Plugged directly into an outlet (no extension cords). The husband of the house assembles all the extension cords himself with the thickness of one wire as five "Chinese" (if I am not mistaken, then on the assembled extension cords, the cable is 2 x 2.5 - I will not say the brand) ...I do not turn on the machine in parallel with other household appliances ... that is, the washing machine and the PMM do not work at the same time. Just as I do not turn on the kettle / microwave during the PMM operation (I read the topic).
And why such a glitch then only on one program? the rest work "adequately"?
And once again I am writing from the very beginning on any program the "drying" process is not displayed at all.

In the evening we will measure the voltage with a voltmeter again ...
sazalexter
* Anyuta * Have you noticed the dishwasher heats the water?
* Anyuta *
Quote: sazalexter

* Anyuta * Have you noticed the dishwasher heats the water?

I don’t know this ... but when I open the machine at the end of the program, steam comes out of the machine - maybe this is from drying? And if it doesn't warm, then what?
sazalexter
* Anyuta * Clearly, the water heats and dries, the problem is in the "brains".
* Anyuta *
Quote: sazalexter

* Anyuta * Clearly, the water heats and dries, the problem is in the "brains".

Today I will come home from work and start this short program again .. I will check - what kind of water is there ... that is, during the washing process, should I open the lid and try the temperature of the water? Right? And if the water is cold, then what? Che, it seems to me that when I opened the lid on this shortest program, the water there was clearly not "warm" .... .. I don't remember right now ...
Stafa
Quote: * Annie *

Well, in short, here and my Bekosha began to jam ...
I noticed the day before yesterday .. and yesterday it happened again .. I describe the situation ...
Model BEKO DSFN 6530
Installing program 1 (Express - 20 minutes) ..
The program starts working and ... gets lost in time ...
I have a fast program on the washing machine. Once I decided to quickly wash my son's school pants, a wretch fell into a puddle. Well, I threw them alone in the car. For 30 min. And I forgot about them. After 4 hours I go into the bath and see a picture - they are all being erased and erased. Having finished washing, they proceed to rinsing and instead of spinning, they again go into rinsing. And so on without beginning or end. The machine is still under warranty, but an inquiring mind did not let it go wild. I checked this program - adding a couple of towels to my trousers - and a miracle, everything was washed. So the express trains are all sorts of insidious programs. It can be designed for clean rinse dishes. So do not abuse it, and indeed use it and life will improve.
* Anyuta *
Quote: Stafa

I have a fast program on the washing machine. Once I decided to quickly wash my son's school pants, a wretch fell into a puddle. Well, I threw them alone in the car. For 30 min. And I forgot about them. After 4 hours I go into the bath and see a picture - they are all being erased and erased. Having finished washing, they proceed to rinsing and instead of spinning, they again go into rinsing. And so on without beginning or end. The machine is still under warranty, but an inquiring mind did not let it go wild. I checked this program - adding a couple of towels to my trousers - and a miracle, everything was washed. So the express trains are all sorts of insidious programs. It can be designed for clean rinse dishes. So do not abuse it, and indeed use it and life will improve.

so the fact of the matter is that the dishes were there - rinse clean
Stafa
Anh, I would also know what those Turks put in their brains in this program. In general, you should not use fast programs, they are all kind of left programs.
* Anyuta *
Quote: Stafa

Anh, I would also know what those Turks put in their brains in this program. In general, you should not use fast programs, they are all kind of left programs.

So I discovered this when washing the blinds .. I won’t "rinse" them for an hour ... well, I’m writing again, why then does the "drying" process appear on any program?
Stafa
Is there such an indication? I don’t know this machine then. Read the instructions more closely.

Quote: * Annie *

So I discovered this when washing the blinds .. I won't "rinse" them for an hour ...
You are just like my husband - and that she will like to wash the dishes for 2 hours. And not pofik, lope it will be washed.
* Anyuta *
Quote: Stafa

Is there such an indication? I don’t know this machine then. Read the instructions more closely.
And not pofik, lope it will be washed.

the fact is that instead of night curtains, I have blinds hanging ..why should I arrange a "defile" at night in front of the windows?

yes, my machine has a 3-step indicator ... washing / drying / end of program ...
Stafa
Her, wash-rinse-dry .. most likely.
* Anyuta *
Quote: Stafa

Her, wash-rinse-dry .. most likely.

The rinsing process is not displayed .. that's exactly ... exactly what I wrote wash-dry-end ...

All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers