GenyaF
Does it dry?
Dmitry P.
And washes and dries. I'm just technically wondering why. If you put it on a hard surface, you can glue it onto super circles of rubber (you can use squares). I have plastic legs, I pushed in.
GenyaF
The circles were glued right away, tomorrow we are going to Simferopol, and the day after tomorrow I will declare a boycott and will not wash the dishes with my hands
Dmitry P.
My wife and son stopped washing as soon as I made an order
I had everything ready, took it in the morning, stuck in the hoses in the evening - wires and forward. And just bought the first salt and some tablets.
Antonina 104
Quote: GenyaF

Does it dry?
Zhenya, congratulations on your assistant!
And washes and dries "like a beast." At the end, it makes some strange sounds like a turbo, but I don't know for sure. Even on a short program, all the dishes were dry, although here someone wrote that on short programs they get the dishes wet
And I never used half the load, there is always something to report
GenyaF
Good for you, you are already almost experienced, and I am so far from this that I did not even understand what it is in a blue package with the inscription Finish stuck into the car. There, only horror stories are written in Russian and everything that it is and where to say, I don't know
Jefry
Quote: GenyaF

Good for you, you are already almost experienced, and I am so far from this that I did not even understand what it is in a blue package with the inscription Finish stuck into the car. There, only horror stories are written in Russian and everything that it is and where to say, I don't know
Can I take a photo in the studio? In general, on the advice of experienced comrades, it is worth stocking up on Domol in the nearest Watsons.
Dmitry P.
In Finish Quantum sample pack. You need to buy salt, and also a detergent.
Add salt, do not forget to set the hardness. Indicator strip included.
Antonina 104
Quote: Dmitry P.

In Finish Quantum sample pack. You need to buy salt, and also a detergent.
Add salt, do not forget to set the hardness. Indicator strip included.
Dmitry P, tell me where is the stiffness set?
Dmitry P.
Oh, this question bothered me until I received a package with documents. There is nothing about this in the passport. There are separate sheets of paper, in different languages, with different stiffness tables. Here it is written how to do it. Test strip included. I recognized my rigidity in Vodokanal (in advance), the strip confirmed.
Looked, I needed sheet 17 9547 14 00-AA. The number is below, on the right Polska rock mmol \ l. In our city, 3 mmol \ l is r2. Actions at the top of the sheet.
Dmitry P.
1 strip - r1
2 - r2
3- r3
4-r4
5-r5
Set by buttons. While holding the program button, turn on the button for turning on the machine. R appears on the tab ... Use the program selection button to select the desired value. Press the start button to memorize. Press the off button.
Press the key combination again to check the selected parameter. Look like that's it
V @ lentina
Hello! Today we brought a German-assembled BOSCH 53M10 dishwasher. I was happy!
But please tell me, when I open the door, it closes, it does not stay open
position. Is this so necessary or something with the PM?
lega
Quote: V @ lentina

Hello! Today we brought a German-assembled BOSCH 53M10 dishwasher. I was happy!
But please tell me, when I open the door, it closes, it does not stay open
position. Is this so necessary or something with the PM?

Do you open it to the end? I keep it in any position, it starts to close itself only if the gap is very narrow. Of course, it should not close itself in the open position. How, then, can you load and take out the dishes if the door does not hold?
sazalexter
V @ lentina Has the facade been hung on it? If without a facade, then it should be so.
Oca
My Beko, without a facade, was also closed, they found a separate piece of paper-instructions, where the pictures tell what and where to unscrew in order to remove the side walls and adjust the spring. V @ lentina, look, maybe Bosch also says how to set up the door?
annnushka27
Quote: V @ lentina

Hello! Today we brought a German-assembled BOSCH 53M10 dishwasher. I was happy!
But please tell me, when I open the door, it closes, it does not stay open
position. Is this so necessary or something with the PM?
I have Siemens, also of German assembly, the facade has not been attached since November, just the kitchen needs to be redone first. So, if the door is opened 90 degrees, then it holds, but not very stable, but if you do not open it completely, that is, at an angle, then it also closes, but it somehow does not bother me, I'm used to it. Moreover, if you open the door and pull out the lower basket, it holds it. These are all small things, compared to what kind of helper she is. Hang up the facade, everything will be fine. Dont be upset!
Olima
innesss-ka, dont be upset. So it (this model) does not suit you, pay attention to other models
Dmitry P.
At first I also looked in this direction. I even saw some equipment. But when he could not find out where it grows from, he stopped looking.
This is about DELFA
Taia
Some of our members of the forum have Delfa dishwashers, they speak well of them. Look for messages here, or it seems in desktop dishwashers ... I don't remember exactly where I met ...
UZhanka
Well, here I have waited for my Bekosha!
Now we are in the process of testing and this is the question that is ripe: after each wash I find an open compartment for the powder ... Although I close it tightly after filling .. Should it open during the washing process or not ???
Julia V
well, yes, but how does he get enough sleep then
UZhanka
For some reason I thought that he should gradually be washed out of the compartment!
Dmitry P.
Most likely, you do not close the compartment tightly, so the powder spills out. If you close tightly, then the powder is enough for two washes
Dmitry P.
Quote: Dmitry P.

Most likely, you do not close the compartment tightly, so the powder spills out. If you close tightly, then the powder is enough for two washes
Yes, but if the pill is three or more
UZhanka
The fact of the matter is that I am already trying to close it more tightly, but already the third cycle - and it is open !!!
Julia V
it became interesting, in Beko that the lid does not open? Dmitriy?
Dmitry P.
I'm glad that people are back, otherwise I go and there is no one here
Dmitry P.
Everything is as in the instructions. I'm even afraid to joke now.
Everything opens up. The main thing is not to put dishes on top
Julia V
everyone washes and silently rejoices at their happiness, because whoever does not have PMM will not prove to them what a cool thing it is, they will definitely say that you are lazy
Julia V
I thought that in Beko it could be something different, innovation, so to speak
Julia V
I am now especially annoyed by the fact that some, in the sense of family members, could immediately store the dishes after themselves in the PMM
annnushka27
Quote: Julia V

I am now especially annoyed by the fact that some, in the sense of family members, could store the dishes after themselves immediately in the PMM
I completely agree! Today I came home, my men dined themselves, the dishes were all over the table, it’s worth it dries, because you don’t ask to wash, but just fold it somehow, then I’ll arrange it properly before washing. Relax!
annnushka27
Quote: Julia V

spoiled, we now require so little of them.
But when I came, they cooked a full multicooker of potatoes. The husband prepared everything, and the son chose the program. I almost fell!
Oca
Quote: annnushka27

Today I came home, my men dined themselves, the dishes were all over the table, it’s worth it dries, because you don’t ask to wash, but just fold it somehow, then I’ll arrange it properly before washing.
In-in, now the dishes don't even reach the sink.I walk around, looking for forks and spoons hidden in the terrain, etc.
Tatiana Od
girls - I'm going crazy, I've already been on all sites for a whole month - I choose PMM, I found it acceptable in terms of money and reviews, I already persuaded my husband.had to be brought on Friday - they did not bring it, the car broke down, they said they would bring it on Tuesday. now I already doubt whether to buy me a ddv-4510 delph or not, or wait 4 months and buy a Boshik, please advise
Scarlett
You have not specified where you are from. Personally, I bought a car, about which no one could tell me anything here either - just no one had one. I rustled through the reviews on the Internet - and bought it, the brand is not widespread, but it washes the dishes purrily, and I don't need more, at this time, as our IRR etc., while she works for me
Taia
Quote: Tatiana Od

why everyone is silent! please answer


Who will answer you correctly? Everyone who has a dishwasher is the first and only one. And you propose to compare which is better ...
If finances allow, I probably would have taken Bosch after all.
For the rest, you need luck, because you can be lucky or not in any option you choose. I also wanted Bosch at one time, but we did not have them on sale at that time. Out of frustration, I bought the cheapest (relatively) that was - Zanussi. I have been using it for two years now and I am satisfied.
And I believe in signs. Once the machine that you were supposed to carry the dishwasher broke down, then you don't need it. In any case, it always worked out for me.
julifera
Honestly, my hand on my heart - I would not take Delfa.
If you really want super-reliability, then Siemens is a German assembly.
Tatiana Od
I live in Ukraine, there is not much to choose from, I went to an electrical goods store - the prices are sky-high, I doubted buying PMM, in another store you can pay in installments, that is, divide the amount into three months, I bought it, and also there are no reviews anywhere about Delfa 4510, a boy from the store said that this model was just beginning to be produced - 10 sets of dishes and 9 liters of water, this surprised me very much, we live in the private sector - we try to save water, like culling is exported
Dmitry P.
If it's not a secret, how much did you split into three?
Julia V
Tatyana, I wouldn't take Delfa, honestly
julifera
Dishwasher 60cm DELFA DDW-4510 (WQP8-7202)
UAH 2319 (roughly 300 bucks)

Dmitry P.
It turns out the minimum - 2249 UAH. + 133 UAH delivery. For this price, I took Beko 6530. True 45.
Tatiana Od
yes, the Chinese assembly of delphi, but I never regretted that I bought a DEX-50 multicooker, also a Chinese assembly, I also have a drying one - also DEX, and with hmm of course I will postpone and buy something better and more qualitative, I will read more reviews - wash the dishes - I can't stand it
Antonina 104
Quote: Tatiana Od

yes, the Chinese assembly of delphi, but I never regretted that I bought a DEX-50 multicooker, also a Chinese assembly, I also have a drying one - also DEX, and with hmm of course I will postpone and buy something better and more qualitative, I will read more reviews - wash the dishes - I can't stand it
I would also look in the direction of Beko, if you need 60cm - there are some!
In general, it was necessary for a long time to go "into the people", here they will advise and dissuade, if necessary. Yes, they will also say where is cheaper
GenyaF
Dmitry and Antonina! Tell me, please, when you first fill it up, how much salt did you have? I began to pour in a liter of water (as it is written in the instructions), so I didn't have 100 milliliters, I had to suck the little water off in order to fill up at least a little salt. What the hell, or it should be, but it is written in the instructions that the tank holds about 2 kg of salt. Or there was still water after service and factory tests, so I'm curious - I first stuck my finger in. Maybe my finger is very short and did not reach the water? In general, I am all in withdrawal symptoms.
Gerda1
When you fill up the salt, the water is displaced. This is normal ... I fit into my full-size Boshik 1.5 kilos during the first filling
Taia
GenyaF
When filling with salt, the water is always forced out and flows out.
Dmitry P.
Water is poured to the eyeballs and a pack of salt is included - 1.5 kg. Water is poured out at the same time. I talked about setting the hardness above.
Niunia
Quote: V @ lentina

Hello! Today we brought a German-assembled BOSCH 53M10 dishwasher. I was happy!
But please tell me, when I open the door, it closes, it does not stay open
position. Is this so necessary or something with the PM?

Uhhh and I have such a problem ... well, now I already had it))) there is no facade yet, I hope it will appear soon))) I have a slightly different model, but they did a test car wash .... and OH MIRACLE !! the pan from the burning of cylinder gas was washed and became like new. And mugs and everything, everything, everything)))) I knew that PMM washes the dishes well, but so much. Since I used the PMM only as an aunt, and she has had it for a long time and the difference is not felt, but here you can immediately see the difference in the quality of the sink. Now, on the next holiday, I'll buy my mom ... although she does not support me in this matter, although she is friends with technology. But it's all a matter of time. She washes and I

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers