Vacuum packing machine

[S-t]

S-t, Valera, No, I haven't. The device works in manual mode, well, okay. If something serious comes out, for example, the lack of evacuation, then I will already carry it to the service center. At my last job, I had a homemade guy who knew a good dialer. But it remained in another life.

And how can he hold if the package is corrugated by default inside and it will not be possible to clamp it tightly at all times? This entire path must be sealed, or what? So that after stopping the pump from the outside, air does not penetrate through it. Redmond can't hold that way either.

Elena, packers with manual mode (STOP button) keep the air. Convenient for "soft" foods. You can stop at any time and then solder.

Elena, packers with manual mode (STOP button) keep the air.

Whoa! That is, everything is on the valves, "there" (to the exit) the air is pushed, but "back" is not? What useful packers. It's even a pity that at one time I didn't bother with such a parameter. ((

packers with manual mode (STOP button) keep air. Convenient for "soft" foods. You can stop at any time and then solder.

I have Steba like that, I just vacuumized three kilos of different pork for smoking. While I'm happy with her "like a boa constrictor"

[Mandraik Ludmila]

Mandraik Ludmila, do I understand correctly that you made sure with your own eyes that she holds a vacuum on pause? It's great!
How long?

does it hold vacuum on pause?

Lena, no-no-no, I did not conduct such experiments, I somehow did not need

You can stop at any time and then solder.

there is a mode for liquid, and the normal vacuum mode can be interrupted and commanded at any time I need.

The figure shows it seems like there is a pause button, next time I'll try, now I've put it under the bed, it's too lazy to get out of it, then out of the box ... Then I'll sign off what will happen



It’s the most interesting, I took out my Stebochka. The experiment gave the following results:
If you press the button with a red square, then the air does not hold - it bleeds off slowly. And if in the mode for soft, then you can stop pressing the button for sealing the soft-wet, the air pumping stops and the vacuum holds for a couple of seconds, then it slowly pushes ... But you have time to solder in time. Move your finger to the adjacent button - a split second. That's how it is

It’s the most interesting, I took out my Stebochka.

I knew ah !!!

If you press the button with a red square, then the air does not hold - it bleeds off slowly. And if in the mode for soft, then you can stop pressing the button for sealing soft-wet, the air pumping stops and the vacuum holds for a couple of seconds, then it slowly pushes ...

Yeah ... That is, not everything is as perfect as we would like. And what was the package, corrugated?

It would be necessary to torment my own, too, on purpose, otherwise all my knowledge was obtained as a side effect.))

what package it was, corrugated

Yes, corrugated, I don't know how to use smooth ones normally - it turns out every other time with this tube, so in China I ordered myself a stock and calmed down.

Yeah ... That is, not everything is as perfect as we would like. And what was the package, corrugated?

It would be necessary to torment my own, too, on purpose, otherwise all my knowledge was obtained as a side effect.))

but how would you like and for what? I can't think of a scope.

I measured how it happens with Ellrona. After evacuating air and pressing the STOP button.
- after 30 seconds the package with the contents is quite dense. Minimum air passage.
- The 45th second the wrapping of the content with the film noticeably weakens, but is still present.
- In the 70th second, the package was almost completely filled with air.

Comrades, justify which side to lay down, grooved or smooth. Not that I didn't take the word for it, but I can't remember without logic and put it at random.

[Mandraik Ludmila]

Yes, corrugated, I don't know how to use smooth ones normally - it turns out every other time with this tube, so in China I ordered myself a stock and calmed down.

Mandraik Ludmila, Lyudmila, can you have a reference where you ordered the corrugated bags?

[* kolyma *]

* kolyma *, Tanya, Did you order it on Ali, or do you need the address of a specific seller?

[Mandraik Ludmila]

Mandraik Ludmila, Buttercup, need needed
To checked already

[Mandraik Ludmila]

Mandraik Ludmila, Buttercup, I would like to check)

I took it specifically here, but you can look for a cheaper one, otherwise it was a long time ago, new sellers could appear

but how would you like and for what? I can't think of a scope.

The field of application is elementary - a more or less long-term vacuum retention when the pump is turned off. It is for those cases that are now found in reviews more and more often, they say, the device does not go to the sealing mode, leading the process of pumping air to infinity.

And if with soft products this is not so important, then for hard or loose products it is very even. As soon as I stop the protracted process of pumping out a bag of peeled nuts in such a situation, it almost instantly loses its "petrified" consistency.

And my packer would be able to hold the vacuum by pressing the Stop (Pause) button - and I would not know grief, stopped and sealed it at the moment when I considered the vacuum sufficient.

Is it clear?

Galina, send me the invoice / act number or name of the person who handed over the device to the service. I can find out what the delay is about. If there is a request from the service, then usually spare parts are sent immediately, but often the services forget or accumulate applications ...
Photographed the box with the sealing elements.

I want to thank you for your help in solving my problem. After your intervention, the spare part was miraculously found, the very next day they called that everything was ready.
The prices for repairs are not very humane, replacing the sealing element cost 2300 rubles, add a little more and you can buy a new vacuum cleaner. Warranty for work only one month.
Once again I am convinced that it is necessary to check everything on the spot. As soon as they called, I immediately rushed there, barely had time before closing. To celebrate, that I don't have to buy a new one, one might say, I took it away without looking. There was a bag with a beautiful, even seam attached to the evacuator, and I didn't think there could be problems.
It's good that I didn't put it in the closet right away, but decided to vacuum the pack of coffee. It turned out that the device pumps air, but does not hold a vacuum and does not seal it itself. And they also forgot to put a plastic insert for wet products. In general, I did not check on the spot - I will have to go again. Disassembled-assembled, disassembled-assembled, disassembled-assembled for the third time and finally it worked. Now I have checked everything on the spot.

Good morning! Is there anyone here from Irkutsk?) I propose to buy a box of Korean vacuum film and divide it) The quality has already been tested, a year ago they already took a box, but now the fisherman left), it will take a little. Ready to share)

[jenyaiva]

jenyaiva, Zhenya, we have a theme "Irkutsk", type in the search and go to it.

[dopleta]

dopleta, thanks for finding this thread! If suddenly someone is here from Irkutsk, join: https://Mcooker-enn.tomathouse.com/in..._smf&topic=173258.new#new

Comrades, justify which side to lay down, grooved or smooth. Not that I didn't take the word for it, but I can't remember without logic and put it at random.

I'm interested too. I have Caso, my native bags are corrugated, I bought Status bags, one side of them is smooth, the other is corrugated. which side to put down for a good seal?

To be honest, for the first time I "hear" about the choice of the "top-bottom" side with grooves, I put it at random, there were no problems

To be honest, this is the first time I "hear" about the choice of the "top-bottom" side with grooves

I read somewhere here, on the forum, but I don't remember exactly where. but if it doesn't matter then fine

It is recommended to lay down with the grooved side down, but I did not notice any special differences anyway.

[Lord 68]

Lord 68, and where did you get such recommendations? Although I didn't notice the difference either. The most important thing is that the corrugation is at least on one side for air outlet.

Now I don't remember exactly, but either in the instructions of my vacuum machine, or in the instructions for the bags. I have bags of different sizes and different manufacturers. Honestly, I don't want to search where it says, I just remember this recommendation well. But again, I did not notice the difference in how to lay down.

Help! I just can't make up my mind: Zigmund & Shtain Kuchen-Profi VS-505 or EIFFEL FOODMATE 06 (FRESHPACK PRO) WITH SEPARATOR or Caso TouchVAC. Gochu broke down yesterday. I am looking for a replacement.

Please help with advice.
I bought the Endever Smart-22 vacuum unit. The set includes packages - enough for the first time, but containers are better for many products.

What containers are suitable for it?

Without understanding the subject, I bought a Status container - but it is designed for their hand pump, and the diameter of the tube of my Endever is not enough for this container. Can you find / make some kind of adapter?

So far it has come to mind only to vacuum it with a vacuum cleaner - it works quite well, but not aesthetically pleasing)))

Can you find / make some kind of adapter?

Can try GOCHU vacuum sealer hose. Somewhere I came across that they were buying to use with non-native containers.

vacuum sealer hose GOCHU

Thank you! Looks like the right thing!
It remains to find him somewhere not on the other side of the city ...

[dkr]

dkr, I bought an adapter in dom-, now it is in stock. 250r

But it's more convenient for me to evacuate the Status containers with a hand pump, I'm not afraid that there will be strong squeezing.

Friends, does anyone have Kitfort 1503, how is he at work? Narrow, neat and simple .. I want to buy as a gift, I believe only our reviews with HP.

I have Kitfort 1502, happy.

[Muscovite girls!]

Muscovite girls! Your help is urgently needed! What kind of vacuum unit would you recommend to buy at an affordable price. I will be in Moscow from 18 to 21 July. I want to buy my daughter a vacuum cleaner. I have a redmond 021, it suits me perfectly. But the price is too high. Is there an option that will be good in functionality and affordable? And can you buy it during this period of time?

Girls boys, forgive my impudence. There is no time to read the thread yet. Work, then apples until late at night. endless drying-juice-filling-puree. Apples are already dreaming If there is a universal packer model, tell me what to look at. I am thinking of using it for freezing (3 chambers), suvid and various dryers, but I don’t know what else. So far I realized that the main point is consumables, and what would be the main functionality, (to know what to want) so that then I would not bite my elbows on the second packer at the price, I would like not the maximum, but rather the other way around: girl_pardon: What to look at? power users, please help!

[kartinka]

kartinka, a chamber for liquid and the possibility of sealing while pumping air.

Good day! I have an Elrona VF50 vacuum sealer. Today I bought VACS covers. Only now I'm afraid to evacuate glass jars, they will suddenly burst. The instructions say: "Connect the vacuum hose to the suction connection and to your vacuum container, then press the" Canister "button. This automatically starts the process of vacuuming the container. You can interrupt the process at any time with the Stop button." Something I do not quite understand, when the maximum vacuum is reached (to which the packer is configured) will it turn off by itself (as when vacuuming packages) or should it be turned off by itself? If it turns off by itself, will the glass jar withstand the vacuum generated by the packer?

If it turns off by itself, will the glass jar withstand the vacuum generated by the packer?

This is a joke? A plastic lid, a plastic hose or a plastic container does not cause concern for you, do I understand correctly?))

This is a joke? A plastic lid, a plastic hose or a plastic container does not cause concern for you, do I understand correctly?))

The plastic that will be with him, and this glass, will fly to pieces, will not seem a little.

[Vasil]

Vasil, Wax covers have their own pump. It is necessary to swing until you feel resistance. Nothing bursts. I vacuum them cereals.

Vasilya, Wax covers have their own pump. It is necessary to swing until you feel resistance. Nothing bursts. I vacuum them cereals.

I bought the lids separately, without a pump, as there is a vacuum sealer. The other day, I received a hose from Gocha by mail, I specially bought it for the VACS caps. Now, when it came to evacuation, I began to fear that the glass jar would suddenly shatter into pieces and cause injury.

The plastic that will be with him

With a slightly significant negative pressure, it will simply collapse / burst. Since this does not happen at every step, it means that the vacuum at home vacuum sealers create scanty. ))

Thanks for the consultation, tomorrow I will experiment. Good night, good dreams.

[Vasil]

Vasil, good luck!
Yes, everything will be fine. I have a Wax with a pump, and I pump it out with it. And from the Status containers, too, with a hand pump. And their containers went to the packer. Yes, when the pressure changes, plastic “plays”, changing its size noticeably, but glass does not. So what? At the same time, they have the same pressure, I have not heard about bursting cans during canning (vacuum) or bombing (excess), but there is a lid as a weak link. But about plastic in vacuum containers, which has gone through microcracks, alas, I met.

Hurray-ah-ah, it turned out, everything is in order with the glass jar! Thanks to all.

People, tell me which vacuum cleaner is worth taking? Never used, will be the first. I take it for the most common storage. Already, probably, public opinion has formed which manufacturer and which model is more reliable, well, more profitable in terms of price / quality.
I don’t need containers, I don’t trust pistols. But I plan to vacuum dry / friable, like seasonings.

[Natasha]

Natasha, I recently bought on Ali. Inexpensive, I chose according to the number of purchases and reviews and the reliability of the seller. Very cheap, for 1117r. at a 50% discount. And I immediately bought a set of packages. Unpretentious, but copes well with his duties. TINTON LIFE vacuum.

[liusia]

liusia, I watched a video on it - people seem to be complaining that the vacuum does not last long. How long have you had it, have you managed to check this moment?



I look closely at Solis and Caso250, but so far I feel sorry for the money. The list is accumulating for "Black Friday"

[Sibelis]

Sibelis, Natasha, I have a Proofi cook, it has been working well for a year. I use it quite often.

I look closely at Solis and Caso250, but so far I feel sorry for the money.

Caso also has more budget models. I have Caso 150 - it works fine. Now, I would probably take something simpler.