Vacuum packing machine

How many have we thrown away?

Now we will collect these packages. Why scatter good

vacuum in a regular milk carton

Oh wow!!!! I'll have to try.

What is the crisis in FIG? Russian women will never be lost

Girls, I'm dying over you !! All kefir and milk in soft bags will disappear from stores

Girls, so the milk cartons are dull, and so uninteresting, you can't see what's inside. of course you can sign, I'm afraid the vacuum sealer will be offended

It seems that early I was delighted. A meter bag with a liver for sous vide was evacuated, and I put it in the refrigerator. Now I looked - there is no vacuum, just a sealed bag with air

[Anna]

Anna, maybe these bags are only suitable for dry food or for freezing.

It seems that early I was delighted.

My gooseberries are fine so far. I also added currants to it.

[Anna]

Anna, maybe these bags are only suitable for dry food or for freezing.

Can. But I mostly need it for sous-vide.

Girls, I'm dying over you !!

As one gypsy trader once said "kryzis, inflation is expensive."

Anya, try after vacuuming with the non-woven to make another seam over the non-woven.

Something like this, I have a tube in the photo, but the principle is the same.

I make 2-3 stitches. Right now I'll cut it off and try again. And the packages have dried up from the milk, I'll play with them.

I just checked the milk bags, they keep the vacuum as cast. We survived the night, I will continue to watch.

In my meter cherries and pumpkin are perfect, freshly chopped and frozen meat too. Once the minced meat pouted, it was on the verge of freshness, maybe that's why ...

And I have such a garbage: now I have vacuumed a milk bag with a tube for a sample. Perfectly sucks air, solders. I take out the bag in order to cut off the protruding tube and solder it over it - during this time the bag will go limp, there is no more vacuum. I tried, without taking out the bag, to solder it a second time at the same level, took it out to cut off the pipe - the same garbage.
Maybe you need to cut the tube very quickly without removing the bag? Cut, slide, solder? I can't figure out at what point I'm mowing.

[Anna]

Anna, try to hold the tube at the base. You seem to have a tube not soldered.

[Anna]

Anna, try to hold the tube at the base. You seem to have a tube not soldered.

I'll try it now. And I'll try with non-woven too.

Posted on Friday 22 Jul 2016 11:27 am

With a non-woven, it holds a vacuum, but Metrovsky, not a milk bag. I will continue to experiment. It is very tempting to reduce the cost of consumables to 0.

And who tried the "status" packages, how much do they justify themselves? At a price two times cheaper than Kasik :)

This is what happened with the milk bag ... I soldered in one place three times ... which even cut off the strip and I removed it ...

Well, it looks the same for me until I open the latches. As soon as I pull it out, the air is drawn in. And I also noticed: if I immediately try to re-solder in this situation, it will not be soldered. Why?

[Anna]

Anna, you need to wait 20-30 seconds; and then re-seam.

[Anna]

Anna, you need to wait 20-30 seconds; and then re-seam.

Without opening the latches? At the same place?

Added Friday 22 Jul 2016 02:27 PM

My liver is sous-vide prepared. It turned out soft and tasty, but there was some water in the vacuum bag. This is clearly visible, because.The liver itself, to prevent moisture from entering the seam, was packed in a simple bag (it had its own red juice.) That is, it clearly etches somewhere - not only air comes out, but water also comes in.
This time there was a Meter bag with non-woven fabric.

[Anna]

Anna, yes, you do not need to open the latches. You need to wait a while for the plate to cool down a little. There, the instructions should be indicated.

[Anna]

Anna, yes, you do not need to open the latches. You need to wait a while for the plate to cool down a little. There, the instructions should be indicated.

Ahhh, maybe that's my mistake. Instructions

Girls and boys! Has anyone vacuumed dried fish? Share how it behaves there and how long is it stored? .. Logically, everything should be fine, but in reality?

You need to wait a while for the plate to cool down a little. There, the instructions should be indicated.

I didn’t read the instructions, but it’s very easy to do it - with the second run we turn on not just the sealing (yes, it will not work on the hot plate), but pumping again. There is nothing to pump out and the device almost instantly goes to sealing. )

Well, do not forget a useful explanation from Stebowicz - the cycle for the "wet product" implies a longer and more thorough sealing.

we turn on not just the sealing (yes, it will not work on the hot plate), but pumping again. There is nothing to pump out and the device almost instantly goes to sealing. )

And why just sealing does not work, but it will be sealed with pumping?

Probably the firmware is like this.

I will definitely try.

Girls! good evening! Please advise which packer to choose - Proofik1080 or Redmond 021 with containers, are they at the same price, or do you think in a different direction? I bow to Redmond .... such agony of choice ... Thanks in advance!

And I bought Mongold and today I vacuumed it and put it in the freezer.


The only thing I did not squeeze the bag to the end, but stopped the process of suction of air, so as not to crush the leaves and squeeze the juice out of them.

by the way, if you press the stop while vacuuming, then the package will be sealed immediately.

Friends, suddenly someone will be interested.
Yesterday in the Metro on Simferopol highway (M2) I saw a CASO MYVAC 20 VACUUM PUMP at a price of 1990 rubles. crossed out price RUB 3990

[Anna1957]

Anna1957, sometimes the tube is not sealed for the first time, air passes through it. I hold the tube with my finger to prevent air from entering the bag, turn the bag over the corner without lowering my finger from the tube, and seal it again. I generally vacuumize cauliflower and broccoli in simple bags. Everything is fine!

redmond 021 with containers

Well, there the price is approaching to profiling only because of the containers, in reality this is the same 20th model + containers. See how relevant they are to you. The pros, with all the complaints, still produce semi-professional equipment in this line. Or take already Redmond 20th. In principle, the reviews on Redmond are also very good.

Added on Monday 25 Jul 2016 11:51 AM

And I bought Mongold and today I vacuumed it and put it in the freezer.

Why did they switch to Status from Kasik? Did you find something that does not suit you?

torturesru, thank you for your response! Thank you girls for the topic, for sharing your experience. Like many of the newbies, I read reviews, and especially the last day, I ordered it at night and in the morning I already took my first Redmond packer in my life. I'm with you!!! Straight pleasant excitement and anticipation)))

[Olga]

Olga, Congratulations! Great packer!

I turn the package onto the corner, without lowering my finger from the straw, and sealed it again.

Thank you, I will definitely try this method.
It didn't work It was sucked off, sealed, and then the air was again in the bag. I tried it again with a non-fabric - the same garbage. It turned out fine with the standard old package.

Now I can tell you about the method of vacuuming meter bags without tubes.Putting the bag in the packer, I fold the inside of the bag into the inside of the bag by about 1 cm, and put the outside on the pipette without bending it. Having evacuated the air and sealed the bag, I open the packer, align the edges and make another seam just above the previous one.

[Stafa]

Stafa, yeah, I also tried all kinds of folds. Although it is so - no. For some reason, the result is highly variable. ((

The main packages I have are oblong, 16x25. If the product is small and it is at the very bottom, then the bag collapses to an impenetrable state right inside, even before the edge. Therefore, I even cut the tubes with scissors in such cases. And that's why I didn't like the recent video in the topic with a non-woven pad - I place the tape not across, but along the package. To bring air from all space.

Today I have vacuumized three packages, before that, I still had a few more - the result was fixed. You just need to adjust a bit with the package and the fold.

[Stafa]

Smart girl!
I'll have to take a chance too.)) Do you have half-empty bags? Well, when there is a lot of empty, stuck together surface at the top?

By the way, it even happened to me that just like that such a bag was perfectly pumped out. Especially if you do not allow to proceed to sealing, but stop and start pumping again. But again, the variability is annoying. Either it will work, or not ... Either it’s a tube - shoved, pumped out, sealed, pushed aside, sealed again. No unnecessary variations.

I'm glad you found another, such a cool way! Stafa - head!

Light, I read it three times until I drive in ... Tomorrow I'll come from the dacha, I'll pack frozen berries, so I'll try.

I put the outside on the pipette without bending

finally did not understand anything!

I put the outside on the pipette without bending
finally did not understand anything!

I thought that I alone, a young inexperienced vacuum cleaner, was in the tank. I didn't understand either

Bend the inner edge inside the bag and put it in the packer's chamber, and there, in the course of the play, you will figure out where the pipka and sho are

Is the inner bottom?

Virgin, well, emae .. The package has two sheets of cellophane, the outer (top) is looking at us, the inner (bottom) side lies in the chamber. I don’t know how else to explain. I already inserted the photo under the spoiler with a pipette and the meaning of how to bend it, but it is unrealistic to take pictures and bend it with one hand, the bend is just under the pipette of the vacuum cleaner. Whoever has no pipka - I have nothing to do with it.

[Anna1957]

Anna1957, well yes. He is between this nipple and another film. Therefore, the internal - in essence, and not in position in space.))

I don't have such a pipka. Rather, it is on the side, I have a ProfiCook. Therefore, I fell into a stupor.
As I understand it, this is a pipette for the hose and in this case it does not matter?

Marin, so the air is pumped out through it. How can she not play the role.))

As I understand it, this is a pipette for the hose and in this case it does not matter?

This pipka to all pipkam pipka !!!