Vacuum packing machine

Hose from redmond on caso tip for zip bags

caso tip for zip bags

how huge he is ...

This is a photo at a distance of 3 cm.
So it seems huge ...

This is a photo at a distance of 3 cm.

Yes, nope)))) I see that the photo is large)))
I compared it with my fingers)))

Later I can write in cm, or take a picture near the roulette.

[qliuka]

qliukaIt is not just like that, it is a container for collecting the liquid drawn from the bag when evacuating.

[qliuka]

qliukaIt is not just like that, it is a container for collecting the liquid drawn from the bag when evacuating.

Yes, that's right, and this is his main advantage

As for the pulse mode, STE means, as I understand it, the operation of the pump while the pump down button is pressed.
let go, does not pump, but does not solder either!

in other models, in which there is no imp. buttons, you can stop the injection by sealing, but you cannot continue it

If you mean stopping and continuing pumping, then this is possible on any packer that has a start / stop button, and if there is a separate sealing button, then you can solder it at any time.

I use them too. I bought it for 200 rubles with kopecks.
Very convenient and cost effective. They are well sealed. True, I used them for packaging products that do not require vacuumization. Frozen berries, carrots, mushrooms ... I just squeezed out the air with my hands as much as possible before sealing. Now I'll try to pump out the air with cocktail tubes - vaapche beauty will be !!!

Judging by the photo in the composition of the film, only polyethylene will keep it well only from moisture, and when evacuated, oxygen will penetrate the film and the products will not be stored for a long time. In general, it is strange that the bags are indicated as vacuum ones. For vacuum, the film must contain special layers of material impermeable to oxygen.

I tried the straw trick today. Freezer bags. Yes .... the vacuum cleaner is great, the vacuum came out, but it lasted a couple of minutes. But for freezing the bags then .. (n) I was really upset, it turns out that the air walks back and forth in them ... But all sorts of apricots, apples and raisins are now sealed and beyond the teeth of any bugs and somehow so compactly distributed after pumping , the tubular focus is definitely brilliant.

container for collecting the liquid drawn from the bag when evacuating.

Did I understand correctly that it is narrowly focused, because they wrote that for zip packets?

it is possible on any packer that has a start / stop button, and if there is a separate sealing button, it can be sealed at any time.

I'll come home and practice

[qliuka]

qliuka, Yes that's right

I tried the straw trick today. Freezer bags. Yes .... the vacuum cleaner is great, the vacuum came out, but it lasted a couple of minutes

Did you make the second seam above the tube? There were no folds on it?

[Evgeniya]

But for freezing bags then ..

Evgeniya, and what brand of freezer bags were they?

[GuGu]

GuGu, A.lenka, thanks for the advice and a visual picture, now at least I will have an idea of ​​what is needed.

[bc ----]

bc ----, Elena, the usual from the store, these are written for freezing. Yes, I did additional gluing, it was just super glued. But packages

Unfortunately neither Caso nor professional models can afford me yet.
So I choose between Redmond 020 (021 not sold) and Steba VK6.
Unfortunately, neither reading the instructions nor watching the video did not clarify some of the questions.

Therefore, I have to ask them to the owners (I will be very grateful for the answers):
1.Redmond:
1.1.if you press the [Start | Cancel] button during pumping down, what exactly happens:
1.1.1. - pumping stops, air does not start flowing into the bag?
1.1.2. - pumping stops, air starts to flow into the bag?
1.1.3. - pumping stops, sealing starts?

1.2. If, after canceling pumping, press the [Start | Cancel] button again, what exactly happens:
1.2.1. - pumping down again?
1.2.2. - does the sealing start?

2.Steba VK6:
2.1. Correctly I understand - holding the PULSE button pumps out air, releasing it stops?
2.1.1 - does the sealing start SOMETIMES if you hold this button for too long?
2.1.2.- air does not start flowing when released?

2.2. [Pumping + Sealing] button: what happens if you press it again:
2.2.1. - during pumping?
2.2.2. - during sealing?

Look like that's it.
Redmond attracts with a cheaper price and a 2 year warranty (if I understood correctly on the sellers' websites).

[mkligor]

1.1.1. - pumping stops, air starts to flow into the bag?

1.2.1. - pumping down again?

mkligor, So

If you take Redmond, which color is better in terms of scratches: bronze or gray?

Although I like the bronze version more, but about gray, and even about stainless (!!!) color experience (for example, my stainless refrigerator on the sides is painted in the color of stainless steel, and only the doors turned out to be stainless) also asks:

if you choose gray, then this color will be:
1. the color of stainless steel, covered with a transparent (almost) varnish?
2. in the color of metal covered with GRAY paint?
3. in the color of bare metal-stainless steel without varnishing?

As for the bronze version, there must be a dark lacquered stainless steel, right?

Thanks for answers.

In gray, stainless steel matte, the rest is all dark (plastic). The case is not easily soiled. Sometimes (if the hands are greasy, damp) then a small trace may remain, which can be easily erased even with a damp paper towel. I have a redmond 021. About the scratches (and how are you going to scratch it)? Under normal use they will not be

Good people, HELP !!! I appeal to Muscovites. Maybe someone will pick up the hose adapter at the Dom-Upak pick-up point and give it to one of my friends? Their point is Medvedkovo metro station, Polyarnaya street 31a, office 14. Mine is very uncomfortable.
I ordered two containers, a cutter, and I wanted a hose too, but the devil misguided and did not order. And I saw that I was a sucker only when I received the parcel ... I wanted to run into the store.
By the way, I checked how the containers with the Caso-pistol packer work. I bought different containers, for two liters and for 1.3. I couldn’t close the two-liter, but the 1.3 was excellent! In general, although it is more expensive, but so cool!

[marinastom]

marinastom, Marina! Good day! I can pick it up from the point of issue. The whole question is: where and how to transfer?

Let's go to the PM.

Girls, I really need help! Has anyone ever evacuated liquid food in vacuum containers? Is it possible? It's about pickling chopped green tomatoes in your own juice, after standing in a saucepan, it turned out a lot. I have a Redmond vacuum. The instructions say - it is impossible, but in the book there is even a recipe. I can't understand where the truth is ... I'm afraid I'll ruin the device ... Thank you!

Girls, help with the choice, please. Is this good one?
🔗

[Marina]

Marina, very good! although it does not have a compartment for liquid, but that's okay, you just lower the bag below, although you have to do this with the compartment if there is no button for the liquid, and only dear brothers have it. The insert for the roll is a whim, and it takes up a lot of space, so the price-quality ratio for a solid 5. Especially the device under the protection of the Amazon, you will return it, if that!

I just ordered one. I haven't received yet

[Tatyana]

Has anyone ever evacuated liquid food in vacuum containers?

Tatyana, I constantly evacuate food with liquid in a container: salad with marinade, kebab with marinade. You just need to make sure that the valve inside the container lid does not reach the products, once my pump pumped liquid into itself in this way (I have a manual CASO pistol and their containers).I pumped so much that the liquid poured out of the hole in the case (maybe it was specially made for this ...). But nothing, lay on the battery, dry out and use it again.

[Jenealis]

Jenealis, Zhenya, thank you very much for the detailed answer. After all, I don't understand them at all, I have never even seen them "live"
Expensive, of course, I can’t afford, and I don’t know yet whether such a road is generally needed.
Here's another one, a little more expensive, if I'm not mistaken because of the hose. This amount is the maximum for which I can persuade my husband.
Please, one more tip

🔗

[Irina]

Irina, thank you very much for the answer, I'll try, maybe, everything will work out

Please, one more tip

If you are interested in Caso, then there is even a separate topic for them
https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=424130.0
there are reviews, and even a comparative table.
I have Caso 10, I am completely happy with it, because I do not use it every day.
You have a version of Caso 12 on Amazon with a hose and zip packages, like it is 30 euros more expensive, you can take it to make it more versatile.
🔗
There are photos of buyers in the reviews.

[Marina22]

Marina22, on the account of Caso you need here https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=424130.0 there is a sign on the first page at the very bottom. There and see how the models differ from each other.
Oops, I got ahead

[Marina22]

Marina22, I have just such a caso. I am very satisfied. The tube is hidden in the back, though I haven't used it yet. And yet, small packages come with him, if possible, order immediately with a roll to a heap, these small packages are not convenient for everything and quickly end.

girls, what do you think, but how can you sterilize the bags? Who does what? Naturally, I mean recycling.

In my PMM ...

[marinastom]

marinastom, I don't have it yet. And if you sterilize it in a microscope ... it's scary to just close the meat in it after the meat, you never know ..

[Jenealis]

Jenealis, I wash them either in PMM or with pens, and then I throw them into the steam room for 5 minutes

[Marina22]

Marina22, look also Korean packers as an option, in my opinion there are many options in terms of price-quality, especially pay attention to the Korean film - inexpensive and proven quality

[YaTatiana]

YaTatiana, 100% is possible, for this containers are needed. The only thing, as mentioned above, is to ensure that the liquid does not get into the suction hose.

and then I throw it into the steam room for 5 minutes

How's that? And where?
I also wash from households. soap or in the PPM.

[Zhenya]

Zhenya, thanks a lot, I'll try!

[marinastom]

marinastomHow do you like the cutter? Is it really that convenient? When I bought, I saved, and on the video I saw how easy they cut them, so it also caught fire!

[Volume]

Volume,

How's that? And where?
I also wash from households. soap or in the PPM.

Yes, everything is simple, I put a water bath and steam) I have a nozzle for a saucepan with holes. I pour water into a saucepan, put it on the tile, top with a nozzle with holes and put bags inside the box and close it with a lid. The water starts to boil and steam comes out through the nozzle with bags)

[marinastom]

marinastomHow do you like the cutter? Is it really that convenient? When I bought, I saved, and on the video I saw how easy they cut them, so it also caught fire!

I have not tried it yet ... I was so upset that I forgot to order the hose, and I forgot about the cutter.
Don't you remember which page is the link to the video?

[marinastom]

marinastom,

Thank you !!!
I tried it, great !!! What is called a light movement! I recommend to all!
And then, I just cut a bag, it will be even better with the film.

And do not share the link checked on the film?

Girls, do not consider it a work, throw a reference to the Korean tape at me, please. And then I ordered the Russian, but something silence ...

Girls, do not consider it a work, throw a reference to the Korean tape at me, please. And then I ordered the Russian, but something silence ...

🔗

[qliuka]

qliuka, ahh, that's where I ordered it, but they won't come for a week, although I probably got used to the ozone speed. And I ordered expanding bags there, no one used them? How was it?