Pchela maja
Quote: olaola1
But if I had chosen now, when I worked with 1080, I would have chosen 1015 again.
Why? There is not a single real review about the new professional product. Is the new model much worse?
olaola1
No, not at all worse, but I liked 1015 more, a completely subjective opinion. The old vakuator is omnivorous, that is, smooth bags or slightly crumpled (used) does not matter to him. He doesn't like the new crumpled bags, the sealing does not always turn on. New packages are evacuated with a bang. He already has a vacuum chamber, you need to adjust when you insert the bags. The old one, it seems to me, was quicker, pumped out air faster, although their technical characteristics were the same. Buttons on 1015 are more convenient for me. The heating element in 1080 is located at the bottom, I thought that I would burn myself, but this never happened. It's more pleasant to hold the 1015 in your hands and I like the design more. 1080 is made more "clumsy", although in the picture I really liked it. Again, this is my subjective opinion. Still, I used 1015 for more than half a year, and I have 1080 quite recently, I just haven't got used to it yet, so willy-nilly I constantly compare them.
domovoyx
Redmond and proficook are very similar. Probably this is the same device under different brands.
olaola1
Quote: domovoyx
Probably this is the same device under different brands.
So it seemed to me too. I don’t know how it is now, but two months ago, the price of Redmond was one and a half times lower than that of the pro-buy.
domovoyx
They are very much alike in appearance and under the lid.
olaola1
Absolutely!!
Pchela maja
I wrote in this topic earlier that I found this model also under other brands (Lacor 69151, etc.)
It is clear that what is being done at one plant is simply that firms place orders under their own brands and assemble them in different ways.
Redmond made kit 21 with containers.
domovoyx
Is there a year guarantee for the professional?
olaola1
One year .
Song
Redmond has two years.
jenyaiva
Definitely this is the same plant, I compared them together, the differences are only on the top, but under the lid and underneath everything is absolutely the same. Even the tactile perception and sound of work are the same)
domovoyx
Redmond is cheaper than proficook. I bought a model with banks for six thousand rubles.
jenyaiva
According to the film, if you believe what is written on the sites, then at Redmond 🔗 it is 3-layer, and Korean is 7-layer 🔗
Therefore, it is thicker and more difficult to solder ...
olaola1
Redmond didn't hold the tape in her hands, I can't say anything. And I compared profikuk and Korean and already wrote about it. Proficuk is harder and denser and slightly matte, Korean elastic and transparent, soldered quite the same.
Quote: jenyaiva
it is 3-layer, and Korean is 7-layer
The number of layers is not an indicator. The layers can vary in thickness. As a result, a 3-layer can be thicker than a 7-layer (as an option). It seems to me, whether it is dry or not, depends on a particular vacuum cleaner.
bc ----
I don’t know about the layering and thickness, but the dom-upak film had a not very pleasant feature. When packing dried apples into it, if the apples are overdried and, therefore, tough, they manage to pierce this film with their dried peel. The holes, of course, are microscopic, but there are enough of them to damage the package.
olaola1
Yes, this is certainly unpleasant. It must be considered for the future. I really don't dry anything (yet).
A.lenka
Quote: bc ----
the dom-upak film had a not very pleasant feature. When packing dried apples into it, if the apples are overdried and, therefore, tough, they manage to pierce this film with their dried peel.
The profikuk film is pierced, too, pierced with sharp ingredients.
domovoyx
Today I evacuated the fish ...
domovoyx
Vacuum packing machine
Fotal on the phone, so .....
Pchela maja
domovoyx, is it salted or prepared for freezing?
domovoyx
Frozen for the future
jenyaiva
domovoyx, laid out the pieces professionally, in the Far East))
domovoyx
The first time I did it. It turned out pretty
jenyaiva
Freeze before?
Jenealis
Please tell me, I have mastered the topic by half, maybe it has already been discussed. Are Redmond containers suitable for electric vacuum machines, namely caso? Or is there a different principle altogether?Vacuum packing machine
Pchela maja
Very interesting containers and will take up little space during storage!
In theory, you can try to use with the Caso pistol
jenyaiva
Jenealis, should match any packer if you choose the right hose)
The picture is of poor quality, but judging by the lid and the pump, the hose from the Korean Gochu should fit
domovoyx
It’s good enough, I held it in my hands. But there the end that is inserted into the vacuum apparatus is thick. At least visually thicker than Redmond.
jenyaiva
Better to be too thick, which can be sharpened) than thin))
domovoyx
In any case, you need to measure on the device
tatianika
I would like to add about the Zepter - I have been using it for a long time and am very happy. Yes, the packages are expensive. But! They can be used for several years. I cut them a little larger than necessary at first. I carefully open it, wash it, dry it, and use it next year. And so for several years in a row. When they remain very narrow, I use them for greenery or for something disposable. This is also necessary. But in winter: strawberries are as fresh. And if there is pepper for stuffing next to it, then it is not poured with pepper. And his price is not $ 2,000 (as written at the beginning of the post), but $ 340. but it works for a long time and regularly. For almost 10 years now.
Pchela maja
Quote: jenyaiva

Better to be too thick, which can be sharpened) than thin))
Here is the post how the gochu vacuum caps were adapted to the caso 200.
domovoyx
Expensive they have everything in a zepter, it is better to buy something simpler, ordinary, for the mass consumer. And you will be happy ...
Pchela maja
Alexei, I completely agree, for me the price is 340 dollars, and even at the new rate, it is generally beyond the bounds ...)))
The item is convenient, but far from essential ...
And, most importantly, why overpay when you can buy a reliable and cheaper one.
domovoyx
Quote: Pchela Maja

Alexei, I completely agree, for me the price is 340 dollars, and even at the new rate, it is generally beyond the bounds ...)))
The item is convenient, but far from essential ...
And, most importantly, why overpay when you can buy a reliable and cheaper one.
I completely agree with you.
domovoyx
Three containers from Redmond 1490 stand and look like a zepter. Adapter hose 250 rubles.
I want to buy a film cutter. Does anyone have one? How is he at work, convenient?
kirch
Quote: domovoyx
I want to buy a film cutter. Does anyone have one? How is he at work, convenient?
And I'm wondering. I also look at him. The eye gauge is bad, I always mow with scissors
Pchela maja
Quote: domovoyx
I want to buy a film cutter. Does anyone have one? How is he at work, convenient?
I ordered a cutter along with a hose and Gochu reusable bags for Caso 10,
on the trail. I'll get it for a week and unsubscribe!)
kirch
Marina, we wait
francevna
Today I received my vacuum cleaner from Ozone.
I read that you can use containers, but I don’t understand where the hose should be connected. There is a hole inside, but the air is pumped out when the vacuum unit is closed. Or when dealing with containers, it runs open.
It welds simple bags for freezing well, but of course it does not pump out the air.

Vacuum packing machine

Vacuum packing machine

Vacuum packing machine

I decided to check how plums behave when frozen, whether they can be used in winter for baking.
Pchela maja
Try to connect to the port and leave it open while vacuuming.
in Caso 10 the same situation)

Vacuum packing machine

almost at the very end of the video it is shown how it works

marlanca
Quote: francevna

marlanca, Galina, I would like to learn more about your work with proficiency. Whether you're using third-party bags or rolls, there is a hose and containers. If so, which manufacturer is suitable. I have a pro-profile 1080, received it today.

I use completely different bags, I took the vacuum machine right away with the containers, I really like them, they are constantly in my refrigerator ..., large with meat, small with herbs or salads ...
francevna
Pchela maja, Maria, and where ordered.
marlanca
francevna,
Alla was just here telling Gale about containers:

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=23439.0
Pchela maja
Caso and bags on Ozone, Gochu hose, cutter and reusable bags on 🔗
francevna
Galina, and which hose company
marlanca
francevna,
I have both the Profikukov hose and the containers, I have already taken a set.
francevna
Pchela maja, Marina, thank you very much.
I have Wax lids for glass jars, will this hose fit or not
francevna
Galina, I have not seen a hose on Ozone, and the containers are now very expensive there.
Pchela maja
Quote: francevna

Pchela maja, Marina, thank you very much.
I have Wax lids for glass jars, will this hose fit or not
Gochu has a hose tip like a plunger)))))
quite, it may come up, but without trying it, you won't know ...

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers