Conveyor grill: model selection, tips, reviews (1)

And out of the corner of my eye I saw an ad for FW. And it’s halogen ... it turns out that all the grills except Hotter are halogen ...

[Hairpin]

Hairpin Hotters also tried to make halogen AGs, but for some reason they quickly removed them from production

I remember about it, though I didn’t understand why it was discontinued ... The explanation on their website is ... so to say, incomprehensible. Just because FWs are decently more expensive than VES, Smile and Brand, so I thought they weren't halogen ...
By the way, in Platypus there is a mechanical large VES for 2500 rubles.

I remember about it, though I didn’t understand why it was discontinued ... The explanation on their website is ... so to say, incomprehensible. Just because FWs are decently more expensive than VES, Smile and Brand, so I thought they weren't halogen ...
By the way, in Platypus there is a mechanical large VES for 2500 rubles.

They explained to me in the store when buying (even more than that, they showed letters, acts and a complaint book) how many complaints and repairs with halogen, and after, on average, 2 years, all these AGs were returned for a return, because they have a 3-year warranty, since they began to fail without exception.

I bought a set of small triangular silicone molds from Hotter's department. I tried it on Saturday. I forgot to take a picture. Baked cheese and curd muffins. I didn't bake muffins in AG before. It turned out delicious. The molds are super. It is written that they are German. When the top was browned, I shook it out, and the bottom was completely white. I turned it out of the molds and browned for a few more minutes. Conclusion: if you need a little and you are in no hurry, but you don’t want to bother with the oven, then you can bake cupcakes in AG. And if guests or just bake a lot, then go straight to the oven, and not lay out on the grates. There is no sense.

[Star]

Hotter has a new model - Smart:

🔗

Star! Now you can want her too !!!

Although what is the difference (except for the design, I did not understand), but the warranty is three years!

Please, advise which airfryer is better to buy, the company, the model, how much it costs, etc. Thanks in advance.

Hm ... Probably Hotter has top - 🔗

In general, so many models were discussed here ... The price range is from 2500 rubles to 15000 rubles ... Therefore, to decide, it may make sense to re-read the reviews? The price difference is six times ...

I looked at the picture and description of Smart. It also seemed to me that the difference was only in design. A delay is simply not needed. Only overpay money in vain. Well, if only porridge in the morning in pots ... At least it will not cool down quickly. I wonder what the 10 automatic programs are in the description of the AG. There from automatic. just warming up. Here in the cartoon it is clear: he threw everything, for example, the program "Milk Porridge", pressed the button and that's it. And here what is automatic. programs?

Girls, here's what's highlighted:
NEW: POWER SUPPLY SWITCH. Now there is no need to remove the power plug from the socket! In order for the airfryer to serve for a long time, you should unplug it after use.

[Dahlia903!]

Dahlia903!
I am still of the opinion that in these devices, you first need to cook those dishes that have been good for a long time. And after the habits of the device become habitual, switch to new dishes. Well, it's just that there are less nerves.
Girls... and 10 minutes at 260 degrees is not dashing? Is this exactly an analogue of frying in a pan? Otherwise, wherever I cook meat, I always fry it in a frying pan ... How old-fashioned I am!

I passed here with a stupid question. When I open the lid of the Airfryer, do the Hotters keep blowing? And then my Brand turned off himself, but Hotter did not turn off. I'm nervous ...

Yes, after the end of work, when the lid is opened, the Hotters "blow" for some time, then the fan stops and the AG can be disconnected from the network. This is normal!

And I don't wait for the fan to stop blowing, I have a shutdown button on the lid, I pressed it and everything was completely silent.

And I don't wait for the fan to stop blowing, I have a shutdown button on the lid, I pressed it and everything is complete silence.

I highly do not recommend doing this, it is specially designed so as not to overheat the ten

ABOUT
Now I won't do that.
Thank you.

[Hairpin]

Hairpin no need to be nervous, as the manufacturer intended, after the end of the work, the heating element is still very hot, it needs to be cooled, so the fan is working

No, I'm not talking about that. The fact that after operation the airfryer continues to blow and cannot be turned off, so that the condensate does not get somewhere there, I read in the instructions.
I mean that when I open it during cooking (well, to measure the temperature), it continues to blow, and the Brand turns off. Maybe again because of the same condensation ... Just the very sensation, when the flow of warm air from the open lid is not very pleasant ...

Of course, during the cooking process, when the lid is opened, it will blow, because the unit is working. This is true for all Hotters!

If you want to open it when the program is running, it of course continues to work, only already in idle, but when you lower the lid, you do not need to configure the program again, also its plus.

It is better to choose a halogen one - it shines beautifully during cooking and cooks faster, compared to a grill at a kuma, it is just a shade.
Anyway, they are all made in China, just choose according to the price-function ratio, the quality is the same for everyone, even for the vaunted Hotter, they only have a Dutch brand and the price is terrible, and production, like everyone else in China, is at the same factory, this is already written on all forums

[Tutta]

Tutta As for the halogen, it is just that they are trumpeting everywhere that this is a fake Hotter himself somehow released an AG line with a halogen heating element, but quickly turned this production down due to a general marriage
And it is more correct to choose a company that has a service in your city

And which is better than an airfryer or a multicooker?

And which is better than an airfryer or a multicooker?

These are two different devices.

[If you plan to cook on several levels and sterilize cans, then you need to take an airfryer with an expansion ring.]

If you plan to cook on several levels and sterilize cans, then you need to take an airfryer with an expansion ring.


Of course, I don't know what kind of airfryer you have, but my ring came in a mandatory configuration ...

If you want to open it when the program is running, it of course continues to work, only already in idle, but when you lower the lid, you do not need to configure the program again, also its plus.

It's strange, as Shpilka wrote above, that Brand AG stops when you open it, but this does not mean at all that you need to program something again later - the program is saved in memory and continues from the place where it was opened. Does Hotter have no memory for the program?

[Anastasia]

Anastasia, Hotters have the same thing. You open it - it stops, you close the lid - work continues until the end of the program.

[Anastasia]

It's strange, as Shpilka wrote above, that Brand AG stops when you open it, but this does not mean at all that you need to program something again later - the program is saved in memory and continues from the place where it was opened. Does Hotter have no program memory?

Anastasia, and you have a Brand with a display?

We also have permanent presentations at the Prague one, although there are a lot of people, only they don't prepare anything new, it's a standard set.
The only thing this weekend they were preparing a dessert of oranges in coconut flakes, in my opinion, they did not succeed, as the oranges seemed completely inedible (they dried them out).
But now they can be used as a decorative decoration of the room.

[Anastasia]

Anastasia, and you have a Brand with a display?

Yes, with display.

The girls tomorrow should bring me a Flavorwave Turbo airfryer 11 liters halogen and an infrared ray, I read everything but I didn’t understand if anyone has one and you can cook porridge in a pot in it, write to me or I may have been foolish with this airfryer and bought in vain help me with I like to make friends with them cartoon, but I am very suggestible and when I watched the advertisement I wanted so much that I think if I don’t buy then I’ll die you are all such craftsmen if anyone has such a beast then tell me what you can cook in it, I’m waiting for tomorrow as a holiday and I’m afraid, as it were it didn't turn into a funeral thanks

Katyushka, how great it would be if you knew it well, point by point, and tomorrow they will bring me a grill if they bring me a grill, I would have tried the porridge and told what happened, but today I even ran off and bought 2 pots, that's how I couldn't: red: Thank you

And my beloved daughter-in-law looks at me and in her eyes I can see that she thinks that I have definitely gone off on the basis of electronics

Oh, Katyushka, thank you for supporting me, they just called and said that they would bring the unit after 6 pm, so I sit and study our favorite forum;) Have a great day everyone

Can I ask you a question? I know that aerogrills come with a removable top cover and a rising one. Is there a fundamental difference? Which is better? If somewhere this has already been discussed, point your finger, please

[Sve]

Sve, if there is space in the kitchen, it seems to me that it is better to take with a non-removable lid. Only when buying, be sure to pay attention that the raised lid stands upright and does not fall. The lid is a rather heavy thing, especially when it is hot, and in the airfryer the heating element is on top, so you have to turn the food over for even browning. And doing this while removing and reinstalling the cover is not always convenient. BUT the removable lid has its advantages: it takes up less space if someone has shelves hanging low, and you can put 2 magnifying rings if someone cans in 3-liter jars. I have a cover on a bracket and I am very happy. Yes, I forgot to write that aero grills with a removable lid are cheaper.

Can I ask you a question? I know that aerogrills come with a removable top cover and a rising one. Is there a fundamental difference? Which is better?

It's not the same for everybody.
1. If you have a removable cover, then you can buy a second expansion ring, and then even a turkey can be put in there. This is not possible with a bracket.
2. If the airfryer is placed under the hinged shelves, the bracket cannot be opened.
3. If you have a removable cover, then you need either a place to put it, or a household who will hold it, or a stand under the cover, but I have not seen them on sale.

The hotter hairpin also has an additional ring and the bracket rises to the desired height and the turkey will fit, you have not seen something

Nut, Hairpin meant that you can buy another ring and put 2 rings at once, and with a bracket, whatever one may say, more than one ring will not fit

I agree, I did not understand it

Hairpin, thanks for the instruction, I liked it so much, I didn't know what was so beautiful for me, but on the wrong topic, I thought that there should be pictures in this thread, I must report for the first pancake, even though it’s not a lump, I got a gruel and wings

or a lid stand, but I have not seen them on sale.

Or maybe it can be made? It is simple, look at what I have:

Hello everyone! I'm thinking about buying AG for the March holidays and the summer season!
Can anyone tell me how to get to their presentation to see and pay less money when buying?
And yet - should you read this Temko about the choice of a model, or is there another?

jinar you just got into Temka and if you read it carefully you will understand what you want and what you count on and why you need it of course Hoter

[eva10]

eva10, Hairpin! Thank you all for the clarification.

[natamaslova]

natamaslova Thank you!!! then I will study !!!

... or a lid stand, but I haven't seen them on sale.

There are such coasters for the AG cover. I want to order one for myself.

[Anastasia]

There are such coasters for the AG cover. I want to order one for myself.

Anastasia, you turned the stand upside down. Look at post # 762 - I have it attached with hooks to the AG handle.

The lid is very conveniently attached and you must buy it, your hands are always free, so look clearly

[Anastasia]

Anastasia, you turned the stand upside down. Look at post # 762 - I have it attached with hooks to the AG handle.

I didn't turn it over, it's on the site where they are sold so it is posted. Or maybe it is bilateral ?! on the side it is attached with one side, but if you put the lid on it on the table, then it is so important as in the photo on the website? I'm just going to buy everything for myself, while I just get by with a stand for hot pots.