Multicooker Brand 502

Hello, how did a young mother acquire MB 502, expectations were high, but so far they have not been met (((Maybe someone from experienced users will tell
I cooked several dishes from the recipe book, the Baking mode does not work well, The chocolate cake did not rise all the way, but only the top, looked shrunken and tasted the same.
Charlotte did not rise at all and did not even bake in 1.5 hours, just a crust from below, but inside a lump of raw mass !!! There was a hole in the center!

Who faced this?

I bought it, one might say, as a gift for 8M. I didn't understand the first dish. But then I saw through all the charms, just superrrrrr)))))))). And now a lover of milk porridge has arrived - docha. The first porridge is millet, the daughter herself took off the pack in the store and said: "From this one!" Just super, before no one except my daughter and my mother ate porridge. And this morning I myself reached for a plate (I was cooking on a delay). And for tomorrow I'm trying rice. Well, let's see ...

By the way: I didn't notice any smells of plastic or those absorbed into the coating of the bowl, though I use it for 2 weeks. I WANT TO BUY a second bowl for every occasion ....

I see many owners of this wonderful thing on the forum. OCH I ask you to throw in different recipes for milk porridge, I want to surprise my daughter, otherwise I used to be able to use Hercules)))))))))))))

[Elena Bo]

... on the stove, now I only cook porridge for my daughter in a tiny saucepan, and that's because we also eat little crumbs ...

I got used to making porridge for the kid in MV. I, however, have 37501, but in this case, it doesn't matter. We now have a portion of 200-250 g, I cook fresh every day. I put it in a glass jar on a napkin, pour water into the bowl and turn on "Steam cooking" for 20 minutes (with a delay from evening to morning). Then it's still on heating, when how much, because we wake up at different times, and the poop is always ready by this time. This is the girls from the topic about 37501 prompted me.

Good day! Maybe I'm not writing in the subject, I apologize in advance. But...
I recently acquired this miracle of technology, I have been dabbling for 2 weeks already. And my pastries according to the recipe book all the time turn out not to baked. What am I doing wrong ???
Baked Zebra cake and Curd cake. They're not raw, but they don't look like cupcakes at all. And especially when they cool down like a big and thick pancake. That is, there is no raw dough, but not at all airy and not friable.
Can someone tell me?
I'm afraid to try baking further on baking, the translation of products is obtained and disappointment (((

I, too, turned out to be under-baked. Me in another topic Elena Bo advised to add another 20 minutes, if not baked. "Zebra" last time turned out great! I also baked a pie here according to this recipe https://Mcooker-enn.tomathouse.com/in...ion=com_smf&topic=60258.0... During the time that the girls in MV were cooking, I did not bake it. Added another 20 minutes, it turned out great!
Elena Bo

Eugene, unfortunately, the 502 model does not have a delayed start in the Par mode.

Is there a respite in Manual? Or another suitable one? Put on 100 gr, but not for 20 minutes, but for 30-35, because in the Steam mode, the time starts after the water boils. Well, in general, choose the appropriate mode and cooking time. And go ahead! Cooking in small portions!

I thought so, even if you put it on without delay, everything is better than on the stove. At me it will run away, then the gas will go out, because there is a small fire under a small saucepan, and the stove is the simplest and not new. Then you will be distracted by the child, and you're done, it's burnt ... In general, it doesn't matter which model of the MB, everything is one - ONE CONTINUOUS BIG PLUS!

Eugene, unfortunately, the 502 model does not have a delayed start in the Par mode.

in 502 there is a delay in the Steam cooking mode! There is no delay only for Frying, Manual and Heating.This is from the instructions.

in 502 there is a delay in the Steam cooking mode! There is no delay only for Frying, Manual and Heating. This is from the instructions.

Do you have the opportunity to check now? I myself have never tried to postpone, but somewhere at the very beginning of the branch, there was a discussion that this is impossible and that there is a typo in the instructions.

Do you have the opportunity to check now? I myself have never tried to postpone, but somewhere at the very beginning of the branch, there was a discussion that this is impossible and that there is a typo in the instructions.

I checked that the postponement of Cooking for steam was set for a maximum of 24 hours and started.

I really like the 502 model in terms of its technical characteristics, I'm going to buy it, but here's a question for the users of this model - does everything work as well as stated? I am asking in connection with the fact that before that I could not decide between 37501 and 37502, but here the 502 model came out, which embodied all the best of previous models, but why is it cheaper than its older counterparts, is there any catch?

I really like the 502 model in terms of its technical characteristics, I'm going to buy it, but here's a question for the users of this model - does everything work as well as stated? I am asking in connection with the fact that before that I could not decide between 37501 and 37502, but here the 502 model came out, which embodied all the best of previous models, but why is it cheaper than its older brothers, is there any catch?

Good day! There is no catch. 37501 and 502 are produced in different factories, so the price is different. On the advantages of each model: 502 - manual 5-step mode, heating off at any time. The 37501 has volatile memory up to 7 minutes. Frying up to 180C.

If in the opinion of experienced users there are any quirks with the 502 model, tell us, very interesting. And what exactly is the 37501 model better from your point of view.
... I can buy only one more multicooker, and I will not be able to understand what is better 37501 or 502

Well, what are the habits? I have not used 502, how can I know what are there, and if they are there at all?
Here, as I said, just personal preference.
For example, I like the design 37501 better. I don't like the design of 502 and 37502.
Girls, well, everyone praises their choice. My choice is 37501.

The multicooker is different. The temperature is higher at 37501. The bowls are different. Some people prefer the ceramic coating as in the 502, others prefer the non-stick coating as in the 37501. Different designs. Choose what you like best.

The multicooker is different. The temperature is higher at 37501. The bowls are different. Some people prefer the ceramic coating as in the 502, others prefer the non-stick coating as in the 37501. Different designs. Choose what you like best.

I like both. But the fact that the 37501 was discontinued is embarrassing.

What confuses? They took it off, not because it was bad, but because it was very good - competitors drove the Brand out of the factory

What confuses? They took it off, not because it was bad, but because it was very good - competitors ousted the Brand from the factory

I read about it (((very sorry. And it is embarrassing that suddenly there will be problems with "consumables".

I really like the 502 model in terms of its technical characteristics, I'm going to buy it, but here's a question for the users of this model - does everything work as well as stated? I am asking in connection with the fact that before that I could not decide between 37501 and 37502, but here the 502 model came out, which embodied all the best of previous models, but why is it cheaper than its older counterparts, is there any catch?

I can imagine how difficult it is to make a choice when, in principle, I have not used a similar technique. And when there are only general phrases in the answers. You can read about the tricks in this thread, it seems to me that everything is described by those who use the 502 itself directly. I read and did not notice any special tricks, but for myself I concluded that my MV for me better. Let me explain why.
I have 37501, my mother has 37502 (i.e.I used it and can compare), 502 was made on the basis of 37502.

Good day! There is no catch. 37501 and 502 are produced in different factories, so the price is different. On the advantages of each model: 502 - manual 5-step mode, heating off at any time. The 37501 has volatile memory up to 7 minutes. Frying up to 180C.

Volatile memory is important to me, because our electricity is sometimes cut off. At the expense of 7 minutes, I doubt, I have the impression that more, though I did not detect, but once 15 MB was turned off. Higher temperature. We love everything that is tanned, with a crust, in 37501 it turns out faster, for me it is important, because I have a small child. The fact that the heating in my CF does not turn off in advance does not bother me. The 5-step mode, of course, is tempting, but against the background of the other advantages, 37501 is no longer so important for me, especially since if you really want to, you can freeze, change the temperature and time during cooking. I'm not that super-duper-chef to use this regime every day. Although, I repeat, it is tempting, of course.

About design and signal. It is more convenient for me to choose modes in 37501, since the control panel is on a horizontal surface, in 37502 I had to bend over. The signal is quiet, it suits me, because, I repeat, a small child. And I also like this signal, so musical, iridescent.

In general, something like that. But it's all the same for you to choose. Write what you will stop at after all, for example, I'm interested.

I am afraid that my BRANDICK will break - will not withstand such an attack. While I dabbled for my own pleasure, it was OK. And now for lunch, buckwheat in a merchant's way, then give wheat bread (Borodinsky was eaten from evening to morning), then I made myself vegetables with chicken breast (I thought it would be enough until lunchtime for tomorrow), nooooo: they ate buckwheat and almost all my vegetables and wheat bread (for 1.5 hours). I sit thinking a 5-liter bowl: buckwheat, almost full volume - ate; wheat bread (whole loaf) - ate; and even vegetables (beans, cauliflower, breast) were eaten. IS THERE THE SAME MV - only for 10 liters

Write what you will stop at after all, for example, I'm interested.

Eugene, thank you for the detailed answer and for your attention to this issue, and indeed for your understanding
I've ordered myself 37501, the color of champagne (although here it was possible to suffer with the choice of color - or maybe cherry). So it's time for me to switch to another branch
And my brand will be the second multicooker, so the experience of using this contraption is already more than a year, my truth is quite simple - a scarlet, but it works, it performs its functions.

Lucy,

I have both models and 37501 and 502. Very often I am asked my opinion about both of them, so a comparative analysis was carried out like the one that the girls talked about all the pros and cons of both models.

Maybe you can publish it, otherwise you are tired of sending it to PM several times a day?
And if so, what topic?

[Vei,]

Vei, I do not mind comparing multicooker, I am very FOR!
We have all written about this many, many times, about the features and differences of each of them. And there is even a special topic.

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=162897.0

I am against the fact that some are trying to shift the problem of choice onto others. And then the disassembly begins (you advised one model, and I have another, so it is bad, are you not saying something?)
Vei, post your analysis in this thread, it will be useful for many to read in order to make YOUR CONSCIOUS choice.

Everything, of course, is so. Except for one thing, there is a topic about comparing 37510 and 37502. And the 502nd, although it is a continuation of the 37502nd, but in fact, namely in terms of modes, is already another MV. And just about the 502nd information is very little. And as soon as you start asking, they drive you in the neck with all the topics, and the messages are also deleted.

Everything, of course, is so. Except for one thing, there is a topic about comparing 37510 and 37502. And the 502nd, although it is a continuation of the 37502nd, but in fact, namely in terms of modes, is already another MV. And just about the 502nd information is very little. And as soon as you start asking, they drive you in the neck with all the topics, and the messages are also deleted.

Here is a topic about all models, including 502:
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=162897.0

Thank you)))
I'll try to test it in the near future ... I need to figure out where to start ... Aaaaaaa ...

I recommend looking here:

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=136112.0

Don't be embarrassed that the recipes are for Brand 37502, they are perfect for your multicooker too. And then master the Manual multistage mode!

Hurray, I became the owner of a magic pot 502. They just brought it)))))

I see you unraveled. Congratulations on your purchase! I read and read yesterday and finished reading ... now, too, hunting and 502nd ... My husband, however, I think, will not approve, and the kitchen is small, there is nowhere to put ... But I have already started "sowing grain", in the sense, to hint that it would be nice ... and there is a place ... And also a small one, a liter for 3 now I want ... Ehhh ...
In general, in an amicable way I envy you. I think you will be no less delighted than I am from mine.

I see you unraveled. Congratulations on your purchase! I read and read yesterday and finished reading ... now, too, hunting and 502nd ... My husband, however, I think, will not approve, and the kitchen is small, there is nowhere to put ... But I have already started "sowing grain", in the sense, to hint that it would be nice ... and there is a place ... And also a small one, a liter for 3 now I want ... Ehhh ...
In general, in an amicable way I envy you. I think you will be no less delighted than I am from mine.

Well, this is how you look .... I could not choose, I had to play with my husband "in which hand"))))). And both chose the 502nd. I'll try this one, maybe I'll spin it on my husband's 37501, just the thought of it does not leave me))))).

Hello. I bought MV 502 in inter. store. When checking (pick up) the box was unsealed. in a box packaging like an egg tray of gray-black recycled waste paper. In the first such packaging in everyday life. I see technology. Someone had one. When closed, the lid on the MV does not fit snugly, it can be used with or without a bowl. Press down with a sticker, the hand fits, you remove the rises. Does anyone have this. The steam valve is loose, not fixed, when the cover is open, it falls out. There is a terrible smell from the whole CF: the body, the rubber band, the bowl, everything stinks. Whoever has no smell there - I don't believe. The warranty serial number on the MB on what and where I could not find. Films and stickers that need to be removed -0 no. Who had it. The bowl does not look like ceramics, the bottom only shines, it is not clear what is covered. In general, there are no certificates on the site. For some reason, they are not sold in ordinary stores. Could my CF be fake. For the first time in keram. more often a biscuit was stuck according to a recipe from a native book, a pancake of gray-green color was torn off. In ceramics, new ones should not stick immediately. Buckwheat with mushrooms according to the recipe - dry, burnt. I was very upset about CF. Very much I go, who has such a MV, write about all of the above for comparison. Thank you in advance.

Lanulya, maybe you really have a fake. The box was printed by my husband, what kind of packaging I have not seen. The lid fits well, to open it you need to press the button - it is on a spring. The valve is well fixed, does not dangle. Yes, and there was no smell, only the first times when cooking now I use it for 2 weeks and there is no smell at all. Nothing sticks to the bottom, the coating is good. Ask the office. whether they supply CF to the store where you bought them.

The lid in multicooker does not fit snugly. since another basket is placed on the bowl during steam cooking. A silicone gasket on the removable lid covers everything tightly.
The steam valve is held by a silicone gasket, so if it is constantly taken out, it may not hold well for a while.
The warranty serial number, as I understand it, is on the box.
There are no stickers on the multicooker (error in the instructions).
Why did you decide that the bowl is not ceramic? Black bowl with a waffle bottom. The ceramic coated bowl is not a terracotta ceramic bowl (rustic clay pot).
Did you grease the bowl with butter before baking the biscuit? Most likely not, since it stuck.
Buckwheat is dry due to insufficient amount of liquid.
To get rid of the smell of new technology, you need to boil the lemon in the Boil mode for a couple of 20 minutes. Pour 1 liter of water. Do not close the lid of the multicooker between cooking.

I received this miracle only today. The inside is really gray-beige packaging. The lid in the closed state, if you press on it, springs (the gap is about 2 mm.) The smell is not strong, after steaming with lemon it became less noticeable, I think it will disappear altogether with time. The bowl is the same as in the photo for the girls. The valve does not hold very well, but it also does not fall out. I haven't cooked anything yet, so I can't give an assessment of taste. Still to come .......

The forum has users MV 37502 and 502. M. b. helped to dispel my doubts. I did not have MV Brand-37502, I bought it for an employee and she gave it to me for testing (this was in October 2012, just an improved model appeared on sale). I tested it for 3 weeks, MV liked it, decided to wait for 502 and buy it myself. Acquired model 502 in December. She was so happy. But I managed to cook only four dishes and she refused to turn on for me, they kept it in the SC for a long time, when I got it back, nothing could be cooked in it, that is, it turned on, but did not cook anything. There are brand representatives on the forum, they helped me get a new one very quickly and efficiently, for which a special thanks to them. But either it seemed to me, or really so, 502 works worse than 37502. And on Soup it boiled more cheerfully in 37502 (namely in the improved model), the first was cooking very quickly and tasty, and now it is impossible to wait for it to start in this mode boiling, condensation drained into the drip tray, not into the bowl. No condensation formed on the lid during baking. I really liked the pastries at 37502, and much worse at 502. I already regret that I didn’t buy the improved 37502. Does anyone have such shortcomings in the 502 model, or was I not lucky. Help me figure out if these are the shortcomings of my CF, or is it in all CFs of this model.

Girls who already use CF with might and main, tell me, pzhsta!

My MV is on the pedestal table under the hanging cabinet, the distance between the table surface and the bottom of the wall cabinet is about 60 cm.Today I brought the MV and set it to boil lemon (the smell at 502 pts. Strong, in SV Brand 6050 I didn't smell at all). As a result, the entire bottom surface of the cabinets became wet due to steam from the MV valve. Although the furniture is kitchen, I am afraid that it will not withstand such an attitude for a long time ((I am sure that not all users of the device have the opportunity to place it in an open space (not under cabinets). It is not recommended to cover the valve, move it to the edge of the table when cooking I'm afraid, because at home there is a 2-year-old daughter who sticks her curious nose everywhere. But what do you do? How to minimize the effect of hot steam escaping from the valve?

with 6050, there was no such problem, because there I build something like a house out of a towel on the lid, and the steam comes out there only before reaching the working pressure, that is, the exposure time is minimal ..

Share, pzhsta, your experience.

I simply slide the MV out and position it so that no steam gets on the furniture.

Such active steam does not come out in all modes, but mainly when steaming. When I use this mode, I push, or rather, I unfold the MV with the valve outward, with my back to me, facing the wall, or even put it on a bar stool.

I'm not picky at all, in my opinion the couple is just a little, but they cook super!

to RepeShock: Thank you)

to Vei: yes, I steamed and cooked, I hope it will soar much less in other modes .. thanks for the advice, I'll try to turn it like a hut, only to the forest in front))

to hellmak: yes, I would not be picky, but it will be too expensive to change the lockers every year, so I'm looking for solutions))

Gulnaz, I have a kettle and mv under the lockers. The kettle has been there for 8 years and everything is ok. I "stick" a thin cling film on the bottom of the cabinets. First, I boil the kettle, then stick the film onto a surface damp with steam. Nothing falls off, everything holds up perfectly. I change the film a couple of times a year.

Somewhere I came across a discussion of a similar problem: as a solution, it was proposed to use a hat for a bath or make a cap from a towel

Gulnaz, I have a kettle and mv under the lockers. The kettle has been there for 8 years and everything is ok. I "stick" a thin cling film on the bottom of the cabinets. First, I boil the kettle, then stick the film onto a surface damp with steam. Nothing falls off, everything holds up perfectly. I change the film a couple of times a year.

I have a thermopot, sv, xn on one surface, and now I have placed it, and a question arose with it. Thank you, I would never have thought to use film like that)

Somewhere I came across a discussion of a similar problem: as a solution, it was proposed to use a hat for a bath or make a cap from a towel

I am building a "house" over the valve for sv from a towel, but there is only a minute or 2 steam from the valve, and in mv the principle of operation is different
By the way, I read about this somewhere on the forum, this method did not work with mv)

[this method did not work with mv]

I am building a "house" over the valve for sv from a towel, but there is only a minute or 2 steam from the valve, and in mv the principle of operation is different
By the way, I read about this somewhere on the forum, this method did not work with mv)

From what? It works very well. I wear it on 502, it works great.

From what? It works very well. I wear it on 502, it works great.

when steaming this very steam comes out of the valve a lot) so far I put the MV on the stove under the hood, since only one small burner was needed)

I bought MB502 in an online store. A very strange packaging (a spacer between the MB), gray-black-brown, resembles an egg tray, and not foam, in which household appliances are usually packed. The lid does not fit snugly, there is a gap and it fits on one side. If pressed by hand, it fits snugly. The steam valve dangles and falls out. The smell has not gone away for a week and even more after each preparation. I did not find the warranty serial number on the MB, where it is located on the MB, in what place. Who has such packaging and everything else described above is, please write, this is a real MB or maybe I have a fake. I bought it from the online store. Thanks in advance.

In my MV 502, condensation does not drain into the condensate collection container. Who has such a problem, tell me what to do, or is it that all MB502 have such a problem. And how to fix it.

Hello. I bought MV 502 in inter. store. When checking (pick up) the box was unsealed. in a box packaging like an egg tray of gray-black recycled waste paper. In the first such packaging in everyday life. I see technology. Someone had one. When closed, the lid on the MV does not fit snugly, it can be used with or without a bowl. Press down with a sticker, the hand fits, you remove the rises. Does anyone have this. The steam valve is loose, not fixed, when the cover is open, it falls out. There is a terrible smell from the whole CF: the body, the rubber band, the bowl, everything stinks. Whoever has no smell there - I don't believe. The warranty serial number on the MB on what and where I could not find. Films and stickers that need to be removed -0 no. Who had it. The bowl does not look like ceramics, the bottom only shines, it is not clear what is covered. In general, there are no certificates on the site. For some reason, they are not sold in ordinary stores. Could my CF be fake. For the first time in keram. more often a biscuit was stuck according to a recipe from a native book, a pancake of gray-green color was torn off. In ceramics, new ones should not stick immediately. Buckwheat with mushrooms according to the recipe - dry, burnt. I was very upset about CF. Very much I go, who has such a MV, write about all of the above for comparison. Thank you in advance.

Good day! Let's start in order: the multicooker carton is made from recycled paper and is environmentally friendly. Many modern enterprises use the technology of waste-free production; on the contrary, it is humane, especially in the 21st century.Yesterday I bought a modern 3-D Blu Ray player SONY, which is also packed, you say, in egg boxes. These are modern environmental standards, compliance with which gives only a plus to manufacturing plants.
You can look at the quality certificates for the new model 502 on our website in the online store, in the multicooker category. A multicooker bowl with a ceramic coating, as well as a heating element. The multicooker cooks perfectly in all modes, without exception. Experienced users can make absolutely any dish. There is already a question of the correct proportions, time, amount of water, etc. Many people learn to cook by trial and error, consulting our magnificent hostesses on the forum, who will never ignore any problem of a novice multicooker user.
The reasons for your defects can be established by our SC through examination. If you really come across a defective model, or a used multicooker - send it to us, we will replace it with a new one without any problems. And if you are from Moscow, then drive up to our office: Egoryevsky proezd 2. From 9 - to 18 hours on weekdays.

Hello Denis BR. Thanks for the answer. I live in Belgorod. I can only take MV to the store. But I would like to know for sure, all MB Brand502 models are packed in just such a package inside or some batches of all. I will wait for an answer. Thank you.

In my MV 502, condensation does not drain into the condensate collection container. Who has such a problem, tell me what to do, or is it that all MB502 have such a problem. And how to fix it.

Everyone has....

In my MV 502, condensation does not drain into the condensate collection container. Who has such a problem, tell me what to do, or is it that all MB502 have such a problem. And how to fix it.

I, as advised here, slightly deepened the beginning of the holes with a sharp knife and the condensate began to drain well into the drip tray. But he, in my opinion, does not all merge there in any mv, and from the valve a little falls on the table when the lid is opened, and remains on the side. I don't see any problem in this, I wiped it off with a cloth and that's it.