Utensils for cooking (pots, pans, lids) (2)

There is a gas grill pan similar to it. But there is a larger hole in the middle and there is a lattice, but they are similar.

[Marfusha81]

Here's another option, there is a hole in the lid
Confused that this is Chinese cast iron, will it be normal ...





Marfusha81, there the material is completely different and the products are not at the bottom, I wrote there above too

[Tillotama]

Tillotama, I think that with a hole in the lid the aero-thermodynamic properties will be better.

Can you please tell me if it is possible to revive a cast-iron frying pan with burnt oil? And another thing: tell me good pans for induction

[Tatyana]

Tatyana, and you look here in this topic: Patination and further use of uncoated pans
The girls there know exactly what to do.

is it possible to reanimate a cast-iron skillet with burnt oil?

It seems to me that this topic should be: Cast iron restoration

I personally cleaned the old rusty frying pan mechanically from rust, then boiled it with soda vinegar, then restored the oil layer with linseed oil.

I think this topic is necessary: ​​Cast iron restoration

Exactly, I somehow missed this topic.

I don't know what would have motivated me to fiddle with the resuscitation of the frying pan.
Is equivalent to
Although I calmly endure tedious work and seem to be not lazy ...

[Tillotama]

Tillotama, it looks a lot like a gas grill pan. If you look closely at the description of the picture, you can see that the fire burns on a very small diameter burner, almost like a hole in a frying pan. And the price is not humane

[Tillotama]

Tillotama,

I would not take Chinese cast iron ... Dumb ...

And I ordered just such a gas grill for my dacha.
🔗

Why did you show it ?!
I've been hanging on the topic for half an hour Frying pan Miracle Grill gas

Cool thing if the stove is gas. There is an even more advanced model where you can bake cupcakes. But the usual is enough for me.

And I ordered just such a gas grill for my dacha.

And I also have such a frying pan, so on my tip 6 more people from our office bought the same (well, that is, everyone who has a gas stove), and recently a friend from another city came to visit, she saw, and so she liked the grill gas that she told everyone at her work, and they ordered 10 at once (I brought them together with Natalya, who organizes this joint venture on our website). They laugh at me in the office - the engine of trade is not advertising, but Tatiana

I already played enough gas with a grill and sold me it too big for a stove. If I cook a lot at once, and this bandura takes up half of the workplace on the stove. And again, the oven is more than fine with me. But this is my personal opinion
cast iron is similar and attracted by the fact that it is smaller in size (although what will fit there, especially if there is a height of 10 cm ...)

and I wanted to bake muffins there in the oven ...
do you say chinese cast iron sucks?

I also bought a cauldron in Ikea - it also says Chineese ... It looks like a saucepan. China China strife?

[Tillotama]

Tillotama,

Definitely, China is not the same as China. And Apple collects in China, but it's Apple, that doesn't mean that all phones in China are cool ...

Hello, please advise stainless steel dishes (I know the firm and analogues))) something cheaper for me, within 10-15 thousand per set. Naturally not China.

Naturally not China.

Why? Read the two posts above right above you.

[svetlana)))]

svetlana))), take Kuhar.Very decent quality. Makes Belarus.

take Kuhar

I confirm!

I completely agree with Vit, very wonderful cookware Kuhar !!!

Now on the official website of the zepter I read that ceramics, like teflon, are very unhealthy. I was surprised.

[optimist]

optimist, Lenusya, most likely we mean the ceramic coating of the pans. It's a polymer. And ordinary ceramics are clay.

[Maria]

Maria, yes, it was the ceramic coating of the pans that was meant.

Now on the official website of the zepter I read that ceramics

well, yes, they do not produce with a ceramic coating

no, I don't like ceramic coating ... and I have Zepter dishes,
but the dishes are much cheaper and no worse than theirs

[Sveta]

but the dishes are much cheaper and no worse than theirs

Sveta, this is one hundred percent. I have been using a set of pots called HOF MAYER for many years, the bottom is six layers, the pots are heavy, the metal is very good, since they have not been done for many years, they look like new with proper care. And I took them almost on the street around the corner, and quite inexpensively, I don't remember exactly, for about 3-4 tons, temperature sensors with a working arrow are built into the lid holder - everything works.

six-layer bottom

I will add. This bottom is only valid for weight. Although it was possible to just put a piece of iron heavier in the fourth layer. Three layers are enough for heating (sandwich). This has been written and understood for a long time.
... The triple bottom has two layers of stainless steel and a heat-conducting layer of aluminum or copper in between. Aluminum is more often used in the manufacture of thermal storage bottoms, but only because it is cheaper than copper. A distinctive feature of the five-layer bottom is the integration into the aluminum heat-distribution layer of a steel disc made of carbon steel with a thickness of 1 - 2.5 mm.
🔗

For those interested, the link is here

🔗

[Wit]

Wit, everything is possible, maybe there are no 6 layers there ... I won't even object - I don't understand anything about this, the main thing is that the castraUlekki are very NOT bad. And what I really like ... they serve me for a long time!

temperature sensors with a valid arrow are built into the lid holder - everything works.

Well, you see how lucky, and I had such a pen with a sensor only in a frying pan on the Zepter's, but they scattered on two pans for a long time (and I can't replace it with anything, so I use them without them, the toad presses new ones to buy, and I'm not sure that they are will be enough for a long time, I also need that sensor, the main thing is that the handles are normal, and they have bullshit

[Sveta]

Sveta, I'll tell you a secret that I use covers from another set, they fit one to one in size - glass because I'm used to seeing the process directly, moreover, I myself asked my husband to remove the handles with these sensors from two or three covers and put the most simple ones from the household store.

I need that sensor too, the main thing is that the pens are normal, and they have bullshit

Stunned, for that kind of money and bullshit !?
At least they should be gilded.

and put the simplest households. store.

the fact of the matter is that I have already collected a whole collection of different pens and none of them fit ... how,

I use lids from another set

and where you were before, I went basically took out a pan and a glass lid ... I came up, and I have been toiling for so many years ((that's why I rarely use these pots, I often cooked little porridge, and now in Redika or Panasika

At least they should be gilded.

aha and on top

[Shine]

and where you were before, I went basically took out a saucepan and a glass lid ... I came up, and I've been toiling for so many years

Shine, I don’t understand THAT how it is

there is a whole collection of different pens and none of them fit ..

why don't they fit? At my request, my husband simply pulled out these handles with sensors, and this, I must say, was not easy to do, pulled out-twisted-pulled out with force with pliers, then drilled a hole with a drill with a small drill, and only then I victoriously screwed on new ordinary handles

that sensor is needed,

Intuition did not disappoint you. This is really bullshit. They took it apart by the bones, looking for gold or a stone, some precious thread, to explain the price. It turned out to be an ordinary thermoplate.
And among homegrown sellers, this miracle is called a "thermal computer"

"thermal computer"

even so ? that's sure to grunt and not get up!

pulled out-twisted-pulled out with force with pliers,

I don't need to pull out anything, everything itself flew off, but there, in order to drill something, you also need to saw off a chuck, and so many manipulations ... well, their nafik, now if I get them for cooking, I will covers on your tip, glass

thermocomputer

how, at that I was the owner of such a wonder, oh, it's a pity that I threw out the pens that were scattered from this thermocomputer ... it was necessary to melt them from black gold

and I also like the lifetime warranty, if it has darkened, they will bring it back to its original form - for your money, any whim .... I don’t understand the guarantee for what. Handles scattered - buy, the bottom darkened - pay ... miracles, however. And why did I buy Duc herd feeling, and it was a long time ago in the 90s.
now I'm smart

, take Kuhar. Very decent quality. Makes Belarus.

Thanks for the advice, I will definitely buy myself some saucepans, I have been choosing dishes on the websites for a long time, read reviews, and ordered them on the BergHOFF website
a set of three pots for 5500 for the stock, they write that the price was 9160, until Friday there is time to think.
refused BergHOFF, ordered a set Kuhar Orchid

[Svetlana]

Svetlana, I have had BergHOFF pots as new for 7 years! Mine is in the dishwasher - then they shine. I love them dearly.
Do not hesitate, take it!

Svetlana, I have BergHOFF pots

Thank you for the information, I will buy for myself)) but I have already made an order))

[Svetlana]

Svetlana, I have had BergHOFF pots as new for 7 years! Mine is in the dishwasher - then they shine. I love them dearly.
Do not hesitate, take it!

We must support fraternal republics, not China)))

We must support fraternal republics, not China)))

What did you mean? Cookware "Kuhar"?

What did you mean? Cookware "Kuhar"?

Doesn't she come from China to Belarus?

I was sure not.
We must do something here, but I don't know for sure.

[personal]

In China under personal frying pan control Ilya Nikolayevich Petunov's plant produces casings of pots, pans, etc. And in Smorgon, the dishes are already brought to readiness for use and sale. The control is tough, the plant there is a good proven, the quality of the products is excellent. However, at his plant in Smorgon, the qualifications and discipline of personnel are at a high level.

You can talk to him on social networks. Type in a search engine and go ahead. And first, take a look at this saucepan and read what it is good for.

🔗

We must support fraternal republics, not China)))

Brotherhood is what? I was upset on the occasion of Kuhar, isn't it already China? Refuse again

In China, excellent things are done in good factories and under the supervision of (as it is called)! And they will be cheaper there than in your japan or germany. It's time to understand this. Refuse! And pay 5 ... 10 times more for a stuck piece of paper with the coveted "Made not in China".

Refuse! And pay 5 ... 10 times more for a stuck piece of paper with the coveted "Made not in China".

Don't be so nervous, I won't refuse, my daughter won't like the dishes.

[svetlana)))]

svetlana))), a little off topic, but iPhones are also made in China. Something is not squeamish about this phone))

Lenochka, and I wanted to write about it

but iPhones are also made in China. Something is not squeamish about this phone))

Yes, here ... my daughter gave me her phone, bought herself a new one, but I can't with this phone, it heats up terribly when talking, such junk ...!, I try not to call from this phone, I only use Vatsap, Viber and log in, for conversations I use the button. And at the expense of dishes .., read the previous comments in this thread and do not know who to believe.