Multicooker Element FWA 01 PB El

Today, soft cereals (millet with pumpkin) cooked porridge on the program. Program time 30 min. At 16 minutes, the pressure release really began, but this happens in normal operating mode, nothing escapes, nothing flows out. It was about 12 minutes, the timer showed 16 minutes, then the multicooker said that the cooking process would end soon and the minutes began to decrease, for 5 minutes - a warning (and our multicooker has it all the time at the end), be careful - the release of steam.
I don't see any problems, this is the workflow of a multicooker, the liquid evaporates under pressure, and it automatically determines how long it takes for this program. The main thing is not to fill the bowl to the top .. The only thing is that I first cook the porridge in water, and only then I add milk and set the temperature of 98 degrees on the chef for 15 minutes ..

[Hope]

Hope, it was like that for a whole year! And then something happened! And in the mode, the crumbly groats began to close. Release the pressure for more than 10 minutes. And I didn't think to turn off! I had to turn it off. And the meat is all badly burned! When I cooked the next time everything went great. But the next time, it closed again. And I stopped using this program! Now I cook on balanced grits.

🔗
I filmed a video of the process. Buckwheat, water 5 glasses, buckwheat 2. Program "cereals" №2.
The pressure relief began at the 17th minute, at the 16th minute everything hung. Steam poured and poured everything ..
Then I dropped the program.
Honestly, I don’t need this, even if it works normally. That is, I want to say that this "normal" mode of pressure relief within 10 minutes does not suit. There is nothing to breathe in the kitchen. We already have a problem with this - with oxygen, and then there's this ..
Advise some other regime to experience, so that without hemorrhoids. ))

[vbk2013]

vbk2013, Multi-cook mode, temp. 103-104 degrees, 18-20 minutes, I will not say exactly, but within these limits, further, add milk and 10 minutes at a rate of 98 degrees.

Good day! Nobody cooked plum jam in the element? Please share the technology!

If you pour hot water on the soup, someone has a buggy (it turns out not cooked) soup. I put on the "soup" program for 60 minutes. How do you get out of the situation? If the "chef" is on, what is the best temperature for cooking the soup? And for how long?

My Multicooker is broken! Has ceased to hold pressure! What to do? Are there service centers? Maybe someone knows? Is it really possible to fix it? It's just that if not, it's a pity to waste time! Well, I feel like no hands without her! I cook pilaf only in it! And it turns out real Uzbek, but in Shteba I tried to cook it and it turned out just rice porridge with meat!
Help!!!!

[Bul]

Bul, Julia! There is a service center. I was fixing the cover. We called the dealership
St. Dubininskaya, house 57, building 9
8 495 721 28 80!!!!!
And they already gave the address of the service center, closer to your location.

[Jouravl]

Jouravl, Thanks Nadya! I'll call you today! Maybe they will repair our wet nurse!

[Bul]

Bul Yulechka !, I'm sorry, please. I was blindly wrong in the numbers 8 495 721 2880

Girls, I wanted to buy bork u700, but it flew by. I stare at the element, especially since now the price has dropped significantly. Should I take Polaris to help? How is the pressure cooker? What can you say about the cup, reliable? And there are also 2 multicooker with different letters pb and pw. Not sure how they differ?

[Sannyshka]

Sannyshka, I have been using this slow cooker for more than 3 years, I really like it. The bowl was scratched a little, but that's okay, Bork's got scratched too over so many years. She has very good pilaf and frying modes. Both had problems with the covers, but they were successfully repaired and both are in constant use.
If it did not work out with Bork, then the Element is a worthy replacement, and its price is lower. Honestly, I have never regretted a purchase, considering that for me the Element is better for me in terms of functionality and programs.
We must also ask the girls who use the Element, but no one writes about their impressions ...

Scratched but won't burn? I just have six months of using the bowl in my cartoon, everything burns solid. Pilaf can't even cook normal. Mine also cooks very slowly. The element has a capacity of 1400. How quickly does it heat up and fry? And most importantly, tell me which programs are sensory? I want a slow cooker for the stupid and lazy, so that I myself can determine the readiness of porridge or cereals.

[Sannyshka]

Sannyshka, I do not know how in this cartoon, but in expensive and good cartoons there is a very high quality, multi-layer coating and scratches are not terrible for him. And this one seems to be quite expensive. She's a pressure cooker, so she cooks fast enough.

Can you tell me the official site? I used to find it, but now something is not working. I'll see if we have service centers if anything.

This is another question. I climbed into a friendly forum and found out about the existence of Redmond with induction. They praise him very much. I am now hesitant. The difference in price is 4 thousand. Redmond has a 25-month warranty and there are service centers in the city. But I don't want to give money for a dummy. Maybe someone has Redmond, what can you say about the company as a whole? I am attracted by 5 touch modes in the element. If I had extra money, I would take both

[Victoria]

Victoria, so I found you a Bork 702 model, like mine. Excellent cartoon!
🔗

Unfortunately bork is not relevant to me. First, the price. Last year it was necessary to tear off over 16 with arms and legs. Secondly, this particular one is not so attractive, and I somehow burned out. And thirdly, this year we do not have such funds (I mean 20-30 thousand), in the past I could have persuaded my husband even at 22-25, as it cost before, but fate is visible)

[Victoria]

Victoria, this model also cost 20 thousand. This is the updated 700.
Then good luck with your search!

Thank you) I read that it was updated) Yes, in principle, there are no more analogues. Either redmond or element. I didn't seem to see better, except for those that come from 20)
I remember either you or Lisa vei said that until you use a cheap multicooker, you will not appreciate all the charm of an expensive and high-quality one) oh, how right you were) I immediately saw all the jambs in my own)

[Victoria]

Victoria, Vika! I have a friend of Redmond with induction. I'm not very happy, I cooked meat on the Stew mode, she said that she couldn't even compare .. But she was presented, she did not buy it.
Today I baked a chocolate sponge cake in Element, rose very well, nothing sticks to the bowl. Honestly, according to the programs I don't see any analogues, if it breaks down into trash, I will still buy the Element. In Borok, I do not like the broth program, it is sensory and the cooking time is the same everywhere, regardless of the quantity and quality of meat, and in Element, I set the time that I need. And in other programs, he beats Bork
... The only plus for me in Bork is a three-level oven.
And many multicooker fail, what can you do, the time is such, there is practically no long-playing technique.

How do you answer so that the name is highlighted? I have already forgotten. In another review, I read that you can cook in an element according to cucko recipes, but I don't remember the number 1054, 1055 or 1010 I wanted to see.

[Masinen]

Masinen, Maria, I am with a question - as a pro, what would you advise Bork 702 (by the way, thanks for the link) or the new Cuckoo 0804 or the Element under discussion? I recently bought at a sale for 6 thousand bork 500 (there were no borks in common use, I took for a sample what kind of animal this brand was - well, I liked it very much!). That's right, the girls write here that until you try expensive models, you won't understand the difference. Now I want a MV or CMV from the above and the money is not a pity.

[severyanka76]

severyanka76, I can't say anything about the element.
Cuckoo is a good multicooker, I have, but another model is 1051, not induction.
And Bork 702 is gorgeous, it has a Roast mode that's worth it, and the temperature can be adjusted from 35 grams.Today I cooked chicken soup in it. At the beginning, the broth on the Broth mode, then I opened it and threw in the noodles.
I don't know Kuku's range, but we have a topic for her. And it has less volume than Bork and Element.
Multicooker Cuckoo CMC-HJXT0804F

How much can you buy an Element?
By the way, I just read that this Element was made at the Kuku plant, like Bork. So if the price is very good, then it might make sense to buy it too)

[Masinen]

Masinen, Maria, what about the Borks with the extra bowls (from experience?). And then I see that both the cuckoo and the element have, but Bork does not. Apparently, such a policy - the bowl is covered and buy a new cartoon.

[severyanka76]

severyanka76, in the service you can buy a bowl.
I can say that Kuku, Bork, and Element have such cool bowls that you don't need to think about a spare wheel.

[severyanka76]

severyanka76, here he writes that there are 700 borks available
🔗

but I remember calling and trying to find out and even placed an order and so they did not call me.
Maybe you can find out.

How much can you buy an Element?
By the way, I just read that this Element was made at the Kuku plant, like Bork. So if the price is very good, then it might make sense to buy it too)

Now the minimum price is 13000, even 12900. I have seen more than 3000 cups for it somewhere. And you did not find the office. Item site? I found it for a long time almost a year ago, but now it does not work, and that's it. And if bork 700 for 15 is available, then this is a very good price. How does one boil beef in broth? It's sensory, isn't it?

Yes, the mode is automatic.
The site did not find the element, it may be altered or will no longer be imported, and therefore the site was deleted.

Girls, yesterday I made an order for Borku702 using the link that Maria gave. Today a polite young man called and discussed the purchase. Then he learns that I am from Yaroslavl and says, keep in mind that this particular model has a lot of faults due to refusal during operation in some modes. Allegedly because of this, these MVs disappeared from chain stores - Bork recalled them all. He suggested that I think about it and if I decide to buy, the store will immediately send the shopping cart. Oh how!

[severyanka76]

severyanka76, and specifically on what modes?
This is the first time I've heard that. In Moscow, they were sold freely, they just stopped importing new lots.
So 700 were removed and 701 were removed.

In this case, I call the Bork service and find out everything.

[Masinen]

Masinen, Maria, said that on the modes of stewing, cooking and 2 more. That supposedly due to a faulty sensor, it suddenly turns off in the middle of the mode. Didn't you have that? Or from your friends?

No, it was not. This should be asked in the topic of bork 702,
But no one seems to have written.

[Sannyshka]

Sannyshka, Victoria, have you decided on the Element?

[Sannyshka]

Sannyshka, Victoria, have you decided on the Element?

No) I haven’t even told my husband yet) about my multi-cooker mania) I drew conclusions for myself that Redmond is definitely not that interested in me as an element. If my husband gives me a gift, then I will shine with happiness for a long time)

I can’t give money to my hands, I’ll buy myself a multicooker) I’ll wipe them with a rag and be happy)

Element served me for two years. I was very pleased. And then some kind of failure, apparently in electronics, stopped holding pressure. I never found the workshop, they played me, then call on one phone, then on another, and I'm tired of it! Maybe in the spring I will do the repair.

It's a shame ... and the instructions say 5 years of operation. Shouldn't there be the most service centers in Moscow? Last year, when I looked, I found at least 2 centers. And you do not know, the company has not been closed? Otherwise, it will turn out like a bork, they will stop producing and that's it.

[Victoria]

VictoriaSo Bork was not closed, they just changed the manufacturer's plant and that's it))
severyanka76, called the Bork service to clarify the moment on the modes?

Maria, I went over to cuckoo 1055. The agony of choice began. Borka has not yet looked for service in our city. And why did the seller say about the lack of Bork - I would have paid yesterday and lived in peace.

[severyanka76]

severyanka76, Kuku also has a moment, the lid is cracking in the clan area, if not confusing.
So Bork has a hotline, and you have to call there, so everyone would say, as it is.

[Masinen]

Masinen, Maria, and in the Bork service they can cheat, what do you think? How long does Bork serve for you? And no problem, right?
I will definitely read about the kuku valve.

[severyanka76]

severyanka76, No, I have it since autumn, in September I bought it. You can look at the topic, I both opened the topic and bought it.
I had no problems, ugh, ugh ... I don't even want to think)))

No, they always answer honestly, I remember calling them on some question. Very nice people work, and they are also supposed to be nice

It's a shame ... and the instructions say 5 years of operation. Shouldn't there be the most service centers in Moscow? Last year, when I looked, I found at least 2 centers. And you do not know, the company has not been closed? Otherwise, it will turn out like a bork, they will stop producing and that's it.

Yes, it's very disappointing. There are several services. I called one and they gave me another phone number. They barely got through there, they redirected me somewhere else! As a result, they gave a phone number on which they simply did not pick up the receiver, but called for several days. Then there was no time to do this, but now it is cold, slippery ... After all, she will have to be taken for repairs.
And the company that deals with the Element is STADLER FORM

in the Bork service they can cheat, what do you think? How long does Bork serve for you? And no problem, right?
I will definitely read about the kuku valve.

Of course they answer politely, but I would not hope for the truth. I called once, tried to find out the temperature in some modes - it was clear from the answer that they themselves did not know ... Better ask Elena Tim, something happened to her with Bork, after a couple of years of use.
My Cuckoo 1055 is now 2.5 years old, the plastic cover on the lid is intact, not cracked. Bork is still quite new, so too - pah-pah ...

[Gibus]

Yes. Lena has a 700 model and she zaglyuchitsya, the brains went. But she had one to use.
Usually, when there are two or three multicooker, they work longer, because you don't drive only one, but in turn everyone works.

Gibus, and in which model with the lid was the problem? I just remembered it and saw the photo.

[Masinen]

Masinen, in 1054 it is massive. It seems that at 1055 someone started to crack. But since the problem is purely decorative, it does not affect the work, this is now treated calmly. I have not cracked, although I use it daily.

I have Bork for three years. I changed the latch on the lid. Do cuckoos have a removable cover? Previously, the models did not have a removable cover, which is very inconvenient, and it often has to be washed. And that over time, it must be calculated. If all these shortcomings are taken into account in the new models, then a cuckoo is quite possible. And if not, then it's either Bork or Element.
By the way, my element is the beginning of 2012, more than 3 years old.
And I use only one, depending on my location, either at home or in the country.

[Masinen]

Masinen, I know they didn't, but it's still unpleasant. Maybe of course they will have something else good, but I doubt it. These expensive multicooker that they have doesn't even make me want to get it. For 40 even less than 800 model, and for 70 thousand it is generally strange and ugly ...

[Jouravl]

Jouravl, wow! These are the units. I also plan to mainly use one, the second to help.