Convection oven: model selection, advice, reviews (2)

that's for sure

Hi girls! I also bought myself an Aerogrill Liberton LAG-03 CM. I read the reviews here and was tempted. I liked the airfryer itself. There is only one "BUT". It rattles very strongly at me. One has only to press on the body from above, then the nasty sound disappears. I, of course, adapted and put a kilogram bag of some cereal on it. But I still feel some discomfort. Has anyone had such a problem? How did you fight her?

Hi girls! I also bought myself an Aerogrill Liberton LAG-03 CM. I read the reviews here and was tempted. I liked the airfryer itself. There is only one "BUT". It rattles very strongly at me. One has only to press on the body from above, then the nasty sound disappears. I, of course, adapted and put a kilogram bag of some cereal on it. But I still feel some discomfort. Has anyone had such a problem? How did you fight it? / Quote] Excuse me, maybe it's on the surface, not very flat? Do you have a halogen?

I have a heating element. The surface is smooth. They were already installed in different places.

Not on the bracket, are you? And if the lid is twisted around its axis, it may stop rattling in a certain position.

again I am with my ves-777. : girl_blum: yesterday my husband at two o'clock in the morning (he comes home so late) brought a chicken, legs and asked him to cook it all. Since I have loved my husband for so many years, I got up (of course I wanted to send all this, but a wise woman does not do that), put two tablespoons of homemade mayonnaise, a spoonful of mustard, paprika, fennel, salt, black pepper, a little ginger and nutmeg in a bowl ... Smeared all this chicken with this. I put foil on the bottom of the grill bowl, put a low grate, put a plate of a double boiler on it, another sheet of foil on it (so as not to get dirty) and set it to 230 degrees for an hour. Half an hour later, I lifted the lid (the grill turns off when the handle is lifted), turned everything over with forks on the other side, put the grill lid back on for the rest of the time. I just lowered the temperature to 200. And that's all. During this time, rice has already been cooked in the multicooker. All I had to do was cut the salad. After feeding the husband, the bowl and everything (except for the lid, part, I put it in the dishwasher. I want to say, everything is easy and simple. If it weren't for such kitchen gadgets, I would have had a hard time. Especially cooking at night, when the spouse comes running from work to have a snack.) that girls, choose kitchen gadgets and make your life easier !!!!

Not on the bracket, are you? And if the lid is twisted around its axis, it may stop rattling in a certain position.

Yes, without bracket. I twist the lid and turn it in different directions, but for a while the extraneous sounds disappear and then return. So I will torment my airfryer for now, or it will torment me, until it welled up, and then I will buy another.

I love all my kitchen gadgets too. They make life much easier and it is a pleasure to cook in them.

I have the same Liberton, and my mother, and my brother - all three AGs do not rattle. Does it rattle from the very beginning or only when the temperature rises? Can you identify where the sound comes from: specifically in the lid, not glass on glass?

I have a heating element. The surface is smooth. They were already installed in different places.

Gallla, does the foil touch the shadow?

I have the same Liberton, and my mother, and my brother - all three AGs do not rattle. Does it rattle from the very beginning or only when the temperature rises? Can you identify where the sound comes from: specifically in the lid, not glass on glass?

I also have such an AG, no rattling. But just hum from work. Maybe he buzzes it with you? Or is there a rattling besides the hum?
I just thought, maybe the grate is low or high, crooked, one foot does not stand on the glass, and when the fan drives the air, it sways and rattles. Or metal pallet. And try to take everything out of it and turn it on empty, will there be rattling sounds?

At Supra, sometimes the lid does not fit well, it was a couple of times. A very unusual sound, I could not figure out which of the working devices was giving it ("in which ear is it buzzing?"). She turned the flask - the ringing stopped. The reason may be simply a crumb caught under the rim, or a small defect on which the lid wiggles.

Help me choose (I don't know which one) not from expensive but really good (in Ukraine) from halogen
: girl_cray: Please !!! Thank you...

Have you already decided: halogen or ten? I have 3 ten Liberton 03: me, my mother, my brother.

I pulled everything out of it, but it still rattles. Today I again cooked homemade sausage in it, there was a rattling and I again put a kilogram bag of peas on top. I like the airfryer myself and everything in it turns out deliciously, if not for this quirk. The price is cheap, it doesn't smell, the complete set is BoHatai, the reviews are excellent, so I took a bite. Now I will know that they can have such jambs and check better. I called the Liberton service center, they advised me to contact the service. They said that they really might not have screwed something up. In such pies.

: yes: shoals, I think, can be both expensive airfryer and cheap ones, it’s how lucky someone is ...

If there is anyone, let him take off the protective bars and dig in. Most likely, the fan blades just touch for something or the bolts of the fasteners are not twisted or re-isolated.

Husband spun it up, twisted it somewhere. It began to buzz less, but still does not want to work quietly without a load on the "head-body". Why did I write about such troubles with the airfryer, that it is necessary not only to pay attention to the flask and to all sorts of twists, but also to the noise of its operation. Because there are problems, as in my case. On the Internet, I found another girl who complained about the same problem, only it was Brand. Here's a quote:

"k-rem
18.09.2012, 16:26
Hello, I have a problem with my airfryer. I got it last month. From the very first use, it has a very noisy fan. Moreover, the noise is not constant. At first it works well, then it starts rattling, pressing on the lid stops, and then again it starts to rattle very strongly, the impression that the fan is loosely screwed on. What should I do in this situation? It is very unpleasant, since my husband bought the airfryer for my birthday, and the device turned out to be with such an unpleasant defect
Elena Brand
18.09.2012, 16:52
The situation is really not pleasant, but fixable. The fan mounting bolt is probably loose. Contact your nearest service center and the wizard will fix this defect."

I found Tesler AG-032 airfryer on the Internet Bowl volume 3.5L, Maximum power, 800W. Interesting ... should cook well with this power and minuscule volume

[Mash]

Oh, Mash, and what can fit in such a volume? Well this is less than the average multi even. Maybe there is some kind of oChepyatka?

[Ksyu]

Not, Ksyulook

Get stupid !!!
What can you cook in it? Even for a child if.

Aerofree fries, one serving One serving of chicken And all this separately

And the lattice, I wonder, will be 10 cm in diameter or less? Oh hilarious,. Some kind of toy this device.

That's what I thought about when I received my air fryer, one small quail will fit! I recommend the unit for those who are on a diet and with a small kitchen Eh, I would have one grate from it, if it is not wider than 15 cm ...

This toy costs 700-900 rubles

Girls, I ask for URGENT help! I bought Hotter HX-1098. Tell me, how should the lid be closed? Immediately lie flat on the bowl or (like me) at first do not reach a little and close tightly after a little effort? Should I run to hand over or is it the way it should be?

Girls, I ask for URGENT help! I bought Hotter HX-1098. Tell me, how should the lid be closed? Immediately lie flat on the bowl or (like me) at first do not reach a little and close tightly after a little effort? Should I run to hand over or is it the way it should be?

I have a Hotter 1087, the lid is closed by simply lowering it onto the bowl, you don't need to press anything.

Does anyone have a Saturn Airfryer? How is he?

I have a Hotter 1087, the lid is closed by simply lowering it onto the bowl, you don't need to press anything.

I don't understand. I need to direct the lid to the flask, otherwise it clings to the back surface of the flask. And the leg staggers ... And where to put the O-ring ?? In the store, they checked without stops that had to be screwed in at home. Maybe they shouldn't have been screwed on? (into the inner surface of the leg)

I don't understand. I need to direct the lid to the flask, otherwise it clings to the back surface of the flask. And the leg staggers ... And where to put the O-ring ?? In the store, they checked without stops that had to be screwed in at home. Maybe they shouldn't have been screwed on? (into the inner surface of the leg)

I don't even understand what you are talking about, I did not screw in anything.
What kind of O-ring? Can expander?

Such a gray gum with a ring, like a multicooker on the lid, so that the steam does not escape. Stops, as on the basis of the AG from the inside. With white soft rubber at the end. A bowl is placed on them and rests on them. I had two in a separate bag. The seller said to screw at home. That they are not screwed in immediately to facilitate transportation. Does the leg holding the lid wobble too?

Does the leg holding the lid wobble too?

Bracket? It shakes a little, but that's if you specifically shake it. I didn't even pay attention to it before.

Girls, I ask for URGENT help! I bought Hotter HX-1098. Tell me, how should the lid be closed? Immediately lie flat on the bowl or (like me) at first do not reach a little and close tightly after a little effort? Should I run to hand over or is it the way it should be?

I have such a model. The lid does not always fit right away. You screw in that pimp that was in the bag. It is screwed on a bracket behind the flask, as if helping the bowl to rest against it. It will get better at closing. The leg staggers.
I think that everything is all right with you, change it to the same ...

I have such a model. The lid does not always fit right away. You screw in that pimp that was in the bag. It is screwed onto a bracket behind the flask, as if helping the bowl to rest against it. It will get better at closing. The leg staggers.
I think that everything is all right with you, change it to the same ...

It is precisely after twisting these pimples that the lid does not close. It seems to have to be pulled over the thicket. No, I will have to go to the store and torment the consultants about the cover and the place of application of the seal, which was lent to me for an extra charge as an irreplaceable component.

Tell us later how you are doing. About the seal is generally interesting, because I can't even imagine what it is and where to wear it.

Girls, tell me about the Vinis VTO-S1700W Condenser

Does anyone have a Saturn Airfryer? How is he?

Have you already bought Saturik? I’m all in thought, then Vinis, then Delfa, I don’t want to be expensive, Cupid’s sister is on mechanics and my daughter on touch control is very praised, but I cannot choose everything.

... my sister bought a delfa on mechanics

I bought my mom a Delphi on the mechanics. It has been working for over a year.Considering that my mother is 79 years old, she is very dashing with AG.

Have you already bought Saturik? I’m all in thought, then Vinis, then Delfa, I don’t want to be expensive, Cupid’s sister is on mechanics and my daughter on touch control is very praised, but I cannot choose everything.

No, I didn't buy it, I'm waiting until they dissuade

No, I didn't buy it, I'm waiting until they dissuade

And today I ordered the Delfa HT-D11D Airfryer

I bought my mom a Delphi on the mechanics. It has been working for over a year. Considering that my mother is 79 years old, she is very dashing with AG.

Thank you today ordered the Delfa HT-D11D Convection Grill

And yesterday I bought myself such a baby.

today in it the buns were browned from the multicooker.

And yesterday I bought myself such a baby.

today in it the buns were browned from the multicooker.

what a beauty, but I have delivery of the 3rd, I'm waiting ...

Yeah, I like it myself. Of course, I read here that it is better to take with a heating element, but I needed a seven-liter one (they are more compact, the kitchen is not rubber), and there were no such ones with a heating element.
The buns are browned for seven to eight minutes, while I'm happy, and then we'll see how he shows himself.

... today in it the buns were browned from the multicooker.

I also

They are rounder than in the photo. Honestly. Flash did not turn off
I have donuts with garlic

What beautiful donuts! Got to bake, thanks for the "tip".

And I bought an airfryer and it costs itself to rest. The first 2 days I tried chicken legs, both pickled and freshly coated, I did not like anything. In the oven itself is delicious, especially since my oven is good with a grill. A bread maker and a slow cooker, yes, it does not stand idle for almost a day. So, whoever has not bought and doubts it is not needed, this is a fact.

I do not know what to say. There are three options:
1) Something is wrong with the AG
2) Something is wrong with the legs
3) Something of the type, as in advertising:
🔗
Just don't be offended, countrywoman, okay? This is a joke.

[Mona1]

Agree with Mona1 100%. Because the legs in AG cannot fail and be tasty.

[Mona1]

Agree with Mona1 100%. Because the legs in AG cannot fail and be tasty.

You know, maybe the legs were watery after defrosting. Maybe that's why? I try not to take them, because they are often imported, ice cream, and I buy thighs mostly, they are not frozen, but chilled, from our farm, or wings.