Lenusya
Conveyor grill (model selection, advice, reviews) Volume 2


We continue to discuss the topic of aerogrills !!!!!
Here you will find advice on purchasing, choosing a model, user reviews about the "pros" and "cons" of this device ... Read, choose, buy and use for your pleasure !!!


Convection oven: model selection, advice, reviews (2)

Conveyor grill (model selection, advice, reviews) Volume 1
azaza
Quote: Mona1

Secondly, some sites explicitly state that you should not use a halogen airfryer for more than 5 hours a day.
Monchik, for all my love for ten, I just can't imagine that you can grill for more than five hours a day Unless barbecue for sale. So, I'm afraid the ten won't stand it either.
Liked about the neon lights for beauty. The scribes do not even know that it is not the backlight that shines, but the halogen itself
Mona1
Quote: azaza

Monchik, for all my love for ten, I just can't imagine that you can grill for more than five hours a day Unless barbecue for sale. So, I'm afraid the ten won't stand it either.
You know, it seemed to me that they wrote about 5 hours, not in the sense that the halogen will deteriorate if it works harder, but like, as on drugs, they write a dose that cannot be exceeded. And drugs, as they say, heal one and the other cripple. And it is better not to get sick and do without them, even in minimal doses. And if there is such a warning about 5 hours, then they just want to say that this is not such a cool and safe thing - a halogen lamp. Even if it does not burst and does not go out, it will have to be in a year or two, or I don’t know how long it’s there, to change it to a new one, because it’s already dangerous to use it. And you can grill the heating element as much as you like, until this very heating element reaches the handle and falls the death of the brave.
Manna
Quote: Mona1

So what's the argument about? Moreover, I do not insist, this is my single opinion.
So there is no dispute at all. I wrote that I am inclined to aerogrills with heating elements, and all my grills were and are with heating elements.

And it was about the fact that aerogrills with heating elements turned out to be more difficult to repair than halogen ones (which the master reported, by the way, this is not an isolated case - just over a year ago I toiled with the same situation, and then the masters told me that this breakdown typical for such aero grills). That is, it was not about the fact that aero grills with heating elements or halogen are more reliable than the other. It was about what the masters say when you come to them with a "dead" airgil.

And my opinion has already been said many times, I am afraid of the light bulb as a heating element in kitchen appliances (God forbid oil gets on the glass of the light bulb).

Quote: Favorite

The struggle between the heating element and the halogen was launched for advertising purposes by the Hotter company.
Well, yes ... Each manufacturer promotes his product as he can, and as his conscience allows him

By the way, in that topic, the link to which I gave earlier, when we all began to say with one voice that we were looking only towards the airfryer with heating element, and no halogen, Vadim (SVP) here's what I wrote:
Quote: SVP

I'm just trying to figure it out. Previously, all buyers preferred with a halogen, now most buyers take with a steel element. As far as I know, Hotter has launched a marketing ploy - that halogen is bad. And I need to understand if customers really do not like halogen or is it the Hotter move that influenced people's minds so much? AND ME YOUR HELP IS EXTREMELY NEEDED to figure it out
Quote: Mona1

I have persuaded, I forgive ... <...> I am a very positive person. Always the first to run and help, and support, and protect.
So I "ran" to defend And the question here is not that the opinion does not coincide (the opinion is exactly the same), it turned out to be unpleasant that it was said about people that "someone blurted out" ... We are all here we share our experience, our knowledge ... And I gave a link to the Temka where we discussed it in order to clarify our words ... And here in response ... Well, okay, forgotten
chaki2005
Girls, if anyone is interested, when I was monitoring the prices for AG, I found a good option for the price. The difference is almost 200g. to my model.
VES AX 730 Dimensions (HxWxD): 30x33x44 cm
kissol
I still ordered Brand 53128 ... tomorrow they should bring it ... in anguish over the bundle, but oh well, it will be ...
Mona1
Quote: kissol

I still ordered Brand 53128 ... tomorrow they should bring it ... in anguish over the bundle, but oh well, it will be ...
And why, in agony, do you think, not everything that is announced there will be brought? Or does it not say what is in the composition?
Ksyushk @ -Plushk @
Quote: kissol

But do not tell me the dimensions of the unit?

Quote: kissol

I still ordered Brand 53128 ... tomorrow they should bring it ... in anguish over the bundle, but oh well, it will be ...

Oh, probably the sizes are no longer relevant, since it has already been ordered. I just got to him today with a tape measure. Length x width = 46 x 33 cm.
kissol
Trezaniya because I ordered on ozone with delivery for tomorrow, but on the site in the kit nothing is written about skewers and it is written that it is halogen .... So think, what will they bring?
Ksyushk @ -Plushk @
Quote: kissol

Trezaniya because I ordered on ozone with delivery for tomorrow, but on the site in the kit nothing is written about skewers and it is written that it is halogen .... So think, what will they bring?

It used to be halogen. But then the halogen was replaced with a heating element. At Ozone there are new parties, since it was not there for a while, then both Branda got AGs in the warehouse, and they appeared at Ozone. So from one batch. Therefore, do not worry.
Mona1
Quote: kissol

Well, OK! tomorrow we'll see what and how
You, most importantly, when they bring you, carefully examine the glass on the flask and lid so that there is no air bubble in the glass. And let them turn on, check what is blowing and heating. Or will you receive it by mail?
lala 2008
Quote: kissol

Well, OK! tomorrow we'll see what and how

unsubscribe, please, what and how. I myself looked after this airfryer on Ozone and I am tormented by the same questions
kissol
Quote: Mona1

You, most importantly, when they bring you, carefully examine the glass on the flask and lid so that there is no air bubble in the glass. And let them turn on, check what is blowing and heating. Or will you receive it by mail?
The courier will bring from Ozone, but I think he is unlikely to plug-check .. This has never happened, and how many have already been bought through online stores!
Manna
Quote: kissol

The courier will bring from Ozone, but I think he is unlikely to plug-check .. This has never happened, and how many have already been bought through online stores!
He won't, check it out for yourself. You have every right. And check it out! (so as not to mess with the return later, if suddenly something) And bubbles, what Mona wrote, it is also important to check. If there is even the smallest one, be sure to return it - this is a marriage, and the flask may burst when heated. And the equipment ... On Ozone, in general, with the description of the goods, the jambs are permanent. The store is big, so they don't bother changing and clarifying the characteristics of the goods. Everything will be included as it should.
azaza
The first time the AG was delivered to me with a shell in a flask. I refused. The next day, they made free delivery and even organized a discount on the goods. So do not hesitate to claim yours for your own money!
kissol
I understood about the bubbles. And how to check the operation of the unit itself? Connect to the network, and then?
Ksyushk @ -Plushk @
Connect to the network. Press the toggle switch. The display lit up - good. Poke any mode button + start = if the fan starts up and literally half a minute later it becomes warm from the heating element, then everything is working.
kissol
And Ksyusha and all the girls, thank you very much for your advice!
kissol
All I am the owner of Brand 35128. Moving to the eponymous Temko. Thank you all for your advice!
lala 2008
Quote: kissol

All I am the owner of Brand 35128. Moving to the eponymous Temko. Thank you all for your advice!

Congratulations on your purchase)))))) I understand that everything is in order with the package. I'm going to the Ozone website for the airfryer))))))
Mona1
Quote: kissol

All I am the owner of Brand 35128. Moving to the eponymous Temko. Thank you all for your advice!
Congratulations, good luck and all sorts of goodies!
* Anyuta *
Wow, that's what you have and battles unfolded over the weekend !!!! Heating elements .. halogens ... Girls, what a "fig" difference .. the main thing is you can cook without oil!

And more about the bubbles .. In my flask there are a couple of bubbles like from mineral water ... that is, no more than 2-3 mm in diameter. but they are noticeable with the naked eye ... how much I cook - so far everything is fine ... and there are, as it were, cracks - just stripes - no more than 1 cm long .. and it is not clear where this "crack" is - inside or outside ... and what to do? ... then I cook - I do not pay attention ... otherwise I will "get confused" with this question .. I will cook everything .. and again I forget ..
Mona1
Girls, Ukrainian girls, who wanted to buy a stimmer for themselves (a pallet with holes), look what I found cheaply. however, the diameter is 24 cm, and the stimmer from AG has a little more - 26. But maybe someone needs: 🔗
Prus - 2
Girls!
Maybe someone can tell me? Today I baked a casserole, the most delicious - horns, meat in small pieces, sweet pepper in cubes, herbs, eggs. Baked in the rice cooker attached to the airfryer (a black saucepan, like for a cake - with a hole in the middle and a lid covered with Teflon). I smeared this rice cooker with oil - I put the product there, and for some reason the finished casserole stuck to the pipe in the middle of the mold. What did I do wrong? Maybe the mold still needed to be sprinkled with semolina or flour?
makabusha
Tell me a very inexpensive model of aero grill in Ukraine or which of the cheap ones you can't take?

Or what characteristics to pay attention to. Delfa has a halogen heater, mechanical control, removable lid, timer for 1 hour, 11 or 12 liters, 1400 power, no fan speed regulator, kind of noisy and eats electricity.
Mona1
Quote: makabusha

Tell me a very inexpensive model of aero grill in Ukraine, or which of the cheap ones you can't take?

Or what characteristics to pay attention to. Delfa has a halogen heater, mechanical control, removable lid, timer for 1 hour, 11 or 12 liters, 1400 power, no fan speed regulator, kind of noisy and eats electricity.
All of them are electrics, there is no speed control, removable cover, mechanics. They are cheap and cheap. Outwardly they are all like twins. Therefore, all of the same reliability, I think. You, most importantly, solve one of the main issues - halogen or heating elements. And look for a cheaper one, but with a good bundle of all sorts of additional things. I was looking for this principle. It was fundamentally important for me that there was a heating element and I had to look, because there is very little to do with a heating element. As a result, a few months ago I bought Liberton LAG - 03CM. Satisfied with him like an elephant. A bunch of everything in the kit. If you need a halogen, then look for a halogen. That AG is very loud, I did not feel. Maybe compared to a vacuum cleaner or a meat grinder. I don't know what to compare with in terms of noise, maybe with a refrigerator. In any case, he cannot be heard from the next room. He tinkles well and loudly once when the timer expires and it turns off. Then you can hear it from any room, even if there is music or a TV set. But that's good. It is possible, even cheaper to find an AG than mine, but without additional stuff. But it is almost impossible to buy them separately, and if you find them anywhere, they cost like another AG. So I really like my version. And if I bought it again, I would have taken it. But, if this additional garbage is not really needed, then grab the cheapest one, but only so that the expansion ring is included, without this, it really is not worth taking the AG, the thing is very necessary.
eka3083
Girls, help me, what volume of pots do you use in the airfryer to fit 2 pots, or 3 pots? In the store there are options: 1L, 0.8L, 0.5L, 0.45L, 0.3L. Which one to take?
makabusha
Quote: Mona1

All of them are electrics, there is no speed control, removable cover, mechanics. They are cheap and cheap. Outwardly they are all like twins. Therefore, all the same in terms of reliability, I think. You, most importantly, solve one of the main issues - halogen or heating elements. And look for a cheaper one, but with a good set of all sorts of additional things. I was looking for this principle. It was fundamentally important for me that there was a heating element and I had to look, because there is very little to do with a heating element. As a result, a few months ago I bought Liberton LAG - 03CM. Satisfied with him like an elephant. A bunch of everything in the kit. If you need a halogen, then look for a halogen. That AG is very loud, I did not feel. Maybe compared to a vacuum cleaner or a meat grinder. I don't know what to compare with in terms of noise, maybe with a refrigerator. In any case, he cannot be heard from the next room. He tinkles well and loudly once when the timer expires and it turns off. Then you can hear it from any room, even if there is music or a TV set on. But that's good. It is possible, even cheaper to find an AG than mine, but without additional stuff. But it is almost impossible to buy them separately, and if you find them anywhere, they cost like another AG. So I really like my version. And if I bought it again, I would have taken it. But, if this additional garbage is not really needed, then grab the cheapest one, but only so that the expansion ring is included, without this, it really is not worth taking AG, the thing is very necessary.

I bought Delphu for 299 UAH with a complete set, 2 lattices, tongs, a ring, some kind of stand with holes, skewers and something else. The girlfriend will master.
eva10
eka3083 The AG includes 4 pots of 0.5 and 3 pots of 0.7. Better to buy thin-walled, not imported, but the production of Pereyaslavl-Zalessky. No handles. Sold in hotter departments. I recently saw good inexpensive pots in the Nash supermarket on Dmitrovskoe highway. It seems from Belgorod. I bought small pots in Hotter, and 0.7 in Pereyaslavl. In large ones, it is good to cook soup. I make mushroom with buckwheat. Delicious!
Mona1
Quote: eka3083

Girls, help me, what volume of pots do you use in the airfryer to fit 2 pots, or 3 pots? In the store there are options: 1L, 0.8L, 0.5L, 0.45L, 0.3L. Which one to take?
It is not even the volume that is important here, but their outer diameter. There may be pots higher and thinner or lower, but wider, and the volume is the same. Here I have 4 pots with a diameter of 10.5 cm fit perfectly there. I have 0.4 liter pots. True, they are still Soviet, thick walls. The current ones are thin-walled. They fit more into them, and I have them with a diameter of 10.5 cm, but they are not squeezed straight in, there is a bit more room to expand, so I think four half-liters will fit.

Mona1
Quote: makabusha

I bought Delphu for 299 UAH with a complete set, 2 lattices, tongs, a ring, some kind of stand with holes, skewers and something else. The girlfriend will master.
Congratulations, makabusha, Cheap and with a wonderful package! Why a friend and not you?
zov71
Girls, good night, now I have come to torment you.
Dissuaded from the mini-oven for now.

But please tell me (I apologize in advance for the stupidity), does the hinge cover outweigh? Well, if I put this unit on a stool during cooking?

besides the brand 35128 and supra, what other models are praised? (except hoters, it's still a little expensive)
about the volume, gear shifting and bubbles in the glass, I realized what else to pay attention to?

and what is better all the same - mechanics or electronics? especially for a beginner?
thank you all in advance!
makabusha
Quote: Mona1

Congratulations, makabusha, Cheap and with a wonderful package! Why a friend and not you?

Because I gave it to a friend on the DR. Her oven in an old stove (rented apartment) does not work. I thought this unit was just a way out for her.
Favorite
Quote: zov71

Girls, good night, now I have come to torment you.
Dissuaded from the mini-oven for now.

But please tell me (I apologize in advance for the stupidity), does the hinge cover outweigh? Well, if I put this unit on a stool during cooking?

besides the brand 35128 and supra, what other models are praised? (except hoters, it's still a little expensive)
about the volume, gear shifting and bubbles in the glass, I realized what else to pay attention to?

and what is better all the same - mechanics or electronics? especially for a beginner?
thanks in advance everyone
In inexpensive models, the lid is often simply removed. If it is more sophisticated, it leans back (Brand 35128 has a bracket), the lid does not outweigh, as it is light. I now have vES, the most common, mechanical, halogen. It fully fulfills its functions. My neighbor has 35128, she is very happy, she repeats Ksyushka's recipes.
Make sure the design and features suit you
zov71
Darling, thank you!
SkTatiana
Hello girls! I decided to buy an airfryer after that. how after working for 2 years my Cartoon Viscount will break. And now for a week now ... I chose the Brand 35131 model, read the reviews, looked at first there are no brands in Auchan. I went to Gorbushka, there are no Brands. They tried to persuade me about Ves, but I decided to order on the Internet. ordered. They brought it. There were no documents in the box. She refused, although they tried to persuade me, they say, they do not break ... They did not persuade me. I ordered it in another online store. Today they brought me to work. Everything is in place. everything is fine. I came home now. I arranged everything. I poured vodka with lemon. She plugged it in. The board lit up .... and that's all. Not a single button works anymore. I almost cry. I didn't want a single thing. like this one! Already bought muffin cups. deep pan for the cake. I defrost the chicken for the third time ... My boys choke on saliva. after my stories about crispy crust and kebabs .... There is no more 35131 in this store. Brought to exchange 35128. With a surcharge. And I'm afraid ... Maybe it's not my destiny to be with aerogrills
azaza
Quote: SkTatiana

Maybe it's not my destiny to be with aerogrills
AG, too, was not given to me twice. Then I deceived fate, and instead of AG I bought a cartoon. And a week later I also bought AG
I'm not hinting at anything, but both units are pleasing. And if it hadn't been for hitranula, maybe the unsuccessful AG would have been caught.
So draw your conclusions: AH - only through a new multicooker! Because AG cannot replace a cartoon, just like a cartoon will not replace AG
Mona1
Quote: SkTatiana

And I'm afraid ... Maybe it's not my destiny to be with aerogrills
Don't be discouraged, the third time it usually comes out. As soon as they bring it, then it is necessary to check with them. First, you need to inspect the flask itself so that there is no damage or even bubbles in the glass. Then plug it in and turn it on so that the air starts to blow. Check whether it is blowing (checking the fan) and whether it is warming up (checking the heating element or a halogen lamp - it will glow) and that the documents contain the date of sale, the stamps are necessary there. And so - the airfryer is great. I am sure you will not be disappointed.
SkTatiana
I don’t want a cartoon anymore. We love meat. And the more roast, the better. I drove her the last days like a double boiler. Something happened to the electronics. Maybe I'll fix it and send it to the dacha ...
And I checked AG. On your forum I read everything about them and looked at the bowl and the lid. But I did not dare to turn it on - there is a halogen, but it cannot be turned on from frost. Tomorrow they will bring the shadow one - I will definitely turn it on.
Favorite
Tatiana, don't be discouraged! AG35128 is even better than 35131! He has a lid on the bracket, more automatic programs and Ksyushka-Blyushka constantly posts awesome recipes. I think you will not be disappointed !!!! Good luck and pleasant moments in the kitchen
SkTatiana
Thank you for your hospitality! Tomorrow I'll sign off on the results.
SkTatiana
Hurrah! The third time it worked! I now have an AG. Dinner had just finished and we ate a grilled chicken for three. Of course, I didn't have time to take a picture, they pulled it out of my hands. At first I tried to fry it while standing. but there was very little space left to the lid, even with an expander, she laid it on a high grate, smeared with mayonnaise with garlic. Very tasty. Tomorrow I'll try to bake something. Charlotte for example ...
Manna
Quote: SkTatiana

I'll try to bake something tomorrow. Charlotte for example ...
I do not recommend charlotte. Such a dough in the airfryer does not bake well.Better yeast or flaky. For example, strudel
SkTatiana
Strudel is delicious. But there is no recipe. I only know how to stuffed pies, and charlotte. Just starting to comprehend the basics. Became a grandmother - you have to match
Manna
Quote: SkTatiana

Strudel is delicious. But there is no recipe. I only know how to stuffed pies, and charlotte.
You can also pies
And if the recipe for strudel, then you can be the most simple of the purchased puff pastry - like such
SkTatiana
I went to work, my son (23 years old) will cook meat (pork chop) with potatoes for our supper. He liked the unit
Leska
Convection oven without glass bulb, made in "high-tech" design (American style). Serves for quick automatic preparation of meat, vegetable and many other dishes.
Its appearance, design (no glass bulb, removable metal bowl and a high upper transparent part), 2 convection speeds will seem familiar to those who used the Jet Stream American Harvest oven (Nesco, etc.) produced in the 90s.

But the HX-4001 Multi is much more modern and perfect! It has a modern design, a glass cover (not plastic), a direct drive to the fan (without a drive belt - belts, which often break), and most importantly - a unique system of automatic stirring in a counterflow of hot air!

It is available in different colors and can be used with a standard glass bulb from the HOTTER airfryer.

Basic functionality:

Cooks on a wire rack, like a regular airfryer - fish, meat steaks; kebabs, vegetables; whole chicken or in pieces (legs, wings), etc.

Prepares in a working bowl in stirring mode with a minimum amount of oil: fried potatoes, vegetables, stews, and other minced meat and fish dishes, seafood, mushrooms, frozen foods, fried dumplings.

Heats up (without microwave radiation) on a wire rack, in a working bowl or on a plate. An excellent replacement for a microwave in the office, at home or in the country.

AIR FRYER! For those who love fried meat and potatoes! Replacing a conventional deep fryer - no need for a lot of oil!

An original gift for a man-hunter or a fisherman and everyone living in the metropolis who are not used to a banal frying pan, lovers of fried meat! And also an excellent replacement for barbecue for a long winter period

He prepares original and exotic dishes of stir-fry (stir-fry) in automatic mode without the Chinese frying pan "wok", without the "durability test" of the smell of households and neighbors and the need to use a powerful hood (there are preset recipes).

The volume of 10-14 liters is enough for cooking for the whole family! (Increased by a metal ring).
If anyone is interested, then he is here:

Convection oven: model selection, advice, reviews (2)
tat-63
I was tempted by AG, does anyone have Brand-35126, how is it in terms of functionality and equipment? Since I don't know how often I will use the choice between 35126 and 35128, which is more convenient and reliable?
Manna
Tatyana, 126th model with removable cover and one fan speed. Mechanical control. 128th model with electronic control, three fan speeds and a cover on a bracket. Both models with steel heating element. It is difficult to say which is more reliable and more convenient. Well ... electronics, of course, fail more easily, but it is also more convenient, sort of like ... well, or it creates such an impression But about the cover ... I prefer the cover on the bracket. It was lifted and that's it, there is no need to attach it somewhere (although there are stands for such covers, they still require additional space). However, if your wall cabinets hang low, then perhaps an airfryer with a removable lid is more suitable for you. The approximate size of the airfryer with the open and raised (for the magnifying ring) lid is about 65 cm, if the lid is not raised, then the height is about 55 cm. I don't know if this information will help you to choose

Here, I found a similar picture (but this is NOT Brand 35128), this is so to show clearly what I meant about the sizes
Convection oven: model selection, advice, reviews (2)

Oh yes ... also about the sizes ...the depth of the airfryer with the lid on the bracket will be greater due to the bracket itself. Convection ovens with a removable lid have a more rounded shape.

Oh, how much I said
Mona1
Quote: manna


Oh, how much I said

But everything is on the case. Respect and respect! 🔗

All recipes

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers