Kitchen stuff (1)

[irysska]

irysska, And you cannot upload a photo of what it turns out the smallest grinding, in comparison with extra salt, for example? Otherwise, my mills grind a bit, I want to find a suitable

Alim, to me "on you"
I am still a photographer - so "maєmo those, scho maєmo". This is the best:



Coriander and extra salt posed for the photos.
I will say one thing, the pictures are not very good, but the coriander in the bulk is crushed well. My abandoned mill, Teskom, ground coriander much worse (although it cost 120 UAH)

[Caprice-Irina]

Caprice-Irina, thanks for bringing me a new toy! I am having fun in the morning.

🔗 🔗 🔗

By the way, besides this Spiromat, there is exactly the same Spirooli machine, you can also buy it.

Beauty is a terrible poweraaaaa Where was it discovered?

In Moscow. Raw-food Wolf shop. Although Spirooli even from abroad with delivery is cheaper.

And what is it?

Catch https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=1429.0

[Caprice-Irina]

Caprice-Irina, thanks for bringing me a new toy! I am having fun in the morning.
By the way, besides this Spiromat, there is exactly the same Spirooli machine, you can also buy it.

I'm glad that I liked the toy. I have fun with it too. Cool-looking salads are obtained.
Still can't break out to make a spiral french fries

Still can't break out to make a spiral french fries

And I did! And put it on smoked chicken! Very beautiful, as if in a nest. Only I didn't have instructions. Although, of course, everything is clear. The only thing is that the legs do not sink, like on a roller, and do not "stick" to the surface.

Only I didn't have instructions. Although, of course, everything is clear. The only thing is that the legs do not sink, like on a roller, and do not "stick" to the surface.

I also had no instructions. The video was used as an instruction. And the legs do not stick. But I attribute this to the fact that my countertop is not perfectly smooth. Although, if they sucked, how would I break them off the table?

[Keti]

And I bought one yesterday. They cost 21 hryvnyas in our "Rost" s / m. I chose for a long time. The seller said that they are very well bought.

Ketihow are your impressions? Liked?
By the way, I wrote earlier about what happened to Teskomovskaya mill. So, they didn’t answer me from Texoma, they stupidly ignored my, maybe I’ll say, complaint, therefore I won’t buy the mill from them anymore - and so 120 UAH. under the tail for several times of use.
And if this one is covered, it will not be a pity for that kind of money.

I now have a new Wishlist. I sit and think whether to buy or not?

I now have a new Wishlist. I sit and think whether to buy or not?

Caprice, how much does it cost you?

On Amazon now $ 18.33

What is this - Berner with the classic 3 nozzles fades in all respects before such a grater ??

I now have a new Wishlist. I sit and think whether to buy or not?

Cool stuff!
Only I am confused by the plastic gear part in the drive ...

Let's think in terms of mechanics. Here we do the work with our hand: up and down, up and down. The lever drives the gears, which in turn move the cutting surface back and forth. In Berner we move the fetus itself horizontally. We do this with a relaxed ease and, it seems to me, with a higher speed. Therefore, in my opinion, in Berner the effort is less, the productivity is higher, and there are more opportunities. But that's why the price is higher.

What is this - Berner with the classic 3 nozzles fades in all respects before such a grater ??

In fact, my question was a trick
I'm just sure that Berner is much more reliable and will take a lot more load

In Berner we move the fetus itself horizontally. We do this with a relaxed ease and, it seems to me, with a higher speed. Therefore, in my opinion, in Berner the effort is less, the productivity is higher, and there are more opportunities. But that's why the price is higher.

When I rub a large, large carrot or beet on a Berner on a VIP model on an insert 3.5 at a thickness that is thicker - I can quite cope with a certain number of huge carrots, I will not say that it is straightforward, but tolerable.
But when I rub on a chip thickness, thinly - then my hand gets tired ogogo, I barely rub 1 carrot or 1 beet to the end.

That is, about lightness - not all positions come out naturally

Another thing is that in Berner, in the process of rubbing, there is simply nothing to break, but imagine if you slip a tight beet into that grater - will it cope and how long will that handle last? And there is no chip thickness in it ...

But safe !!!

[julifera]

But when I rub on a chip thickness, thinly - then my hand gets tired ogogo, I barely rub 1 carrot or 1 beet to the end.

julifera, and you just put your hand with the carrot on the surface and easily, without any effort, lead it back and forth, back and forth, as if you are stroking. I don’t know - I have no effort at all! Like clockwork!

[julifera]

julifera, and you just put your hand with the carrot on the surface and easily, without any effort, lead it back and forth, back and forth, as if you are stroking. I don’t know - I have no effort at all! Like clockwork!

On the insert 3.5 + chip thickness - it will not work for me in principle! This is the hardest combination for me.
Yes, and on the second thick thickness, it will also not work just like that:
- if you do not make any effort - a thick carrot or beet will get stuck in my teeth, never reaching the blade!

It's easier with thin carrots

I take off my hat to the power of your hands Dopletochka!!!

[Dopletochka]

I take off my hat to the power of your hands Dopletochka!!!

No, it's not about hand strength. Apparently, we are right with the privilege - the very first, old Berner was much better quality. The difference between it and subsequent releases is palpable!

No, it's not about hand strength. Apparently, we are right with the privilege - the very first, old Berner was much better quality. The difference between it and subsequent releases is palpable!

I subscribe to every word! The quality has changed. Or have your hands tuned in for so many years? If she herself had not bought a grater for a relative (in the same store as myself 20 years ago) and had not tried them at work during her studies, I would have said for sure that she had problems with her hands.

I now have a new Wishlist. I sit and think whether to buy or not?

I ordered this piece for myself. They promised to deliver within 10 days

It seems to me. when you cut carrots, you need to cut them diagonally. and then finally in the middle. And if you immediately try with a wedge in the middle with effort, it is difficult. But this is my personal opinion. I kind of cut into circles. Terke is 16-17 years old and alive. When I bought, I immediately bought everything that was for her. True, the trough did not take root, I picked up a flat container - I cut it into it and store the cutters there.

[Caprice]

Caprice, urgently awaiting a report. Well, very interesting. I want to...

I'm interested in myself. So far, only an email from them has received that my order has been accepted for execution.

In the course of my search, I got a couple more "Wishlist":



Only this thing is a little expensive for now.
But I have not yet found this thing in Israel:

[Cook]

Cook, I bought it in the White Cat, but I don't wash it in the dishwasher, because the blades may become dull. Although it is not a problem to buy additional knife attachments. Here is mine, but not with all the attachments (the family is asleep, did not make noise)


It helps a lot in the harvesting season and takes up little space. So with me and ride to the dacha and back!
By the way, there is a video on the internet - watch it at work - it's called the Alligator Suite.

[And our entu is constantly shown on TV. I want it for a long time, but I also think it's a little expensive. Yes, and I would like to touch her.

Genius is a pretty decent company. And this device (if original, of course) is from Genius. Their old nyser-diser has served me faithfully for several years. To be honest, I am still not even sure of its originality, although it is written on the box. The knives remain sharp after multiple washing in the PMM, and the containers, in fact, are not breakable polycarbonate.

It helps a lot in the harvesting season and takes up little space. So with me and ride to the dacha and back!
By the way, there is a video on the internet - watch it at work - it's called the Alligator Suite.

I looked very much interested, looked at the price of a complete set of 4.5 thousand rubles ... I thought about it.
Basically, I'm only interested in dicing here. In this case, I do not need a complete set of all attachments? Which ones do I need in this case?

[Lyi]

Lyi, I have the most popular all, except for the 3x3 nozzle (for nuts and garlic). Using a 6x6 nozzle, I cut onions and potatoes for the first, sometimes carrots. For salads, 9x9 is ideal, but I bought it separately (although I also used 6x6 at first, I love when the salad is finely chopped), 12x12 is great for winter preparations - lecho, vegetable stew, all sorts of salads from zucchini-eggplant, everything is very fast. The price also confused me at first, for this money you can buy a combine. But I won't get it to chop onions and potatoes for dinner. And the alligator in my shelf next to the burner is always at hand and takes up very little space. The blades are very sharp, once I touched them harder, so my fingers became mesh. Initially, I did not even consider an analogue in plastic, since I need to cut raw vegetables such as beets and carrots. I have been using it for the third year and am very satisfied. Good luck with your choice!

[Lyi]

looked at the price of a complete set of 4.5 thousand rubles .... thought about it.

Basically, I'm only interested in dicing here.

Lyi, if you are only interested in cutting into cubes, look in the direction of Bosch Cube, MCM 5529 - it is almost the same for the price, but the cutting speed will be no comparison with a manual one and it also has a regular grater-shredder implemented very well, plus a blender, plus a universal knife - and knead the dough, and grind into crumbs. read about it, we have a forum thread here https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=22259.0

I watched the videos, well, I also want to, especially on the second. Conveniently, takes up little space, all vegetables at once in a container. Girls, the question arose - are the containers round for just one vegetable? It is necessary to constantly open and shake this out for a salad, it is not very convenient. And how to distinguish a fake, I read reviews on other sites - who praises, who scolds.

[Lyi]

Lyiif you are only interested in dicing, look towards Bosch Cube, MCM 5529

Lisss's, Thanks for the offer.
I myself love everything electric. But I have a complete set of Kenwood KM 020 nozzles, that is, both low and high speed graters, plus an old Ultima combine with 4 discs in working order.
But I cut everything every day on Berner, I don't want to wash the harvester because of 4-5 potatoes, etc.
But I don't have a cube cutter. Now I'm thinking about the Alligator.
Pilgrim 73if I buy here
Alligator for 4560 rubles, will it be a complete set of everything you have, or will you still need to buy replacement blocks? There is something incomprehensible painted.
Although I will still think. The toad crushes.

aa, then yes, the alligator will be the very thing! I had it up to a cube, it is really convenient, and wash quickly .. but I had one from the teleshop, my mother-in-law gave it away, so it broke quickly. but not yet broke, cut well

Ludik, I have an Alligator for over three years. I'm happy as an elephant ... Okroshka, salads - in a flash. Tomatoes, though my daughter only chicks, I do it every other time ... The basic set should be enough for you

[Lisss's, matroskin_kot]

Lisss's, matroskin_kot , Thank you!
I understood correctly, to get cubes you need to lay plates (potatoes), can't you get a cube just by putting a whole potato? In this case, will it be cubes?
Now, as soon as I defeat my toad, I will buy this Alligator.
The main thing is not to get another Nayser, which crumbled at my first use, all the knives remained (stuck) in the potatoes. I didn't collect them again, so as not to start picking them out of the potatoes again.
Irochka, throw your Magadan. In February we had our own Magadan in the Kuban, cold, frosty, windy.

I've been in Sochi for five days. In Magadan, it was warmer for me ... And now I go around the house only in woolen socks ... The alligator works in tandem with Berner often. The pumpkin and manty were first planed on the plates by Berner, and then cubes by the Alligator. But, more often than not, I just cut it into plates with a knife, and then with an Alligator .. It turns out quickly.

[Lyi]

in, exactly, I had a Nayser !! not an Alligator !! Thank you, Lyithat recalled!

[Lisss's]

Lisss's, Thanks for the offer.
I myself love everything electric. But I have a complete set of Kenwood KM 020 nozzles, that is, both low and high speed graters, plus an old Ultima combine with 4 discs in working order.
But I cut everything every day on Berner, I don't want to wash the harvester because of 4-5 potatoes, etc.
But I don't have a cube cutter. Now I'm thinking about the Alligator.
Pilgrim 73, if I buy
Alligator for 4560 rubles, will it be a complete set of everything you have, or will you still need to buy replacement blocks? There is something incomprehensible painted.
Although I will still think. The toad crushes.

I will tell you because I have a complete set, you will take an alligator and plus a replacement unit for 722 rubles. it will be sooooo convenient and fast. 4 sizes are obtained. if you want, I'm planning to take a couple more boxes for 266 rubles a box drive. chopped turned over put on trail boxing, etc.
By the way, the toad can be slightly reduced by subscribing, if you want to rummage I remember there seems to be 25 units, the full cost then minus 15 percent and a cumulative discount - we have no obligation at all, I take it for myself. I don’t know how in the Krasnodar center

[Lyi]

Lyi, drive your toad away! This is a really worthwhile thing to ask for an adequate price. I have never regretted that I bought this vegetable cutter. You will simply be thrilled when, in a few moments, you cut vegetables into a pot of soup, and even in tandem with a cuckoo - it will be a song! Alligator made in Sweden is no Chinese Nayser. And in general, after Kesha and Kukushka, is this a high price?
Py Sy-I use it every day and enjoy it

[Irochka]

Today I climbed to look for pizza scissors and came across in my bins on just such a thing
🔗
Once I rejected it and hid it away, deciding that it would be easier for me to cut fries with Berner. Why didn't I use it and didn't even try cutting into cubes? I don't know
Here, too, you can first cut into plates, and then turn them into cubes.
In general, while the toad wins. I will try to make cubes on this DECOK, if something goes wrong, then I will return to the Alligator. Maybe she will crush boiled vegetables, not chop, then back to the Alligator, since I mainly use cubes for salads.
Thanks everyone for the advice.
Irochkaso you brought it to us Armageddon Magadan with its winter.
We will not let you go to Magadan again.

[irysska!]

This is the kind of spice mill I bought myself

irysska! Many thanks for the tip to the mill! I already have four of them
Cope with their work perfectly !!! What is characteristic, reusable! Once in a store, a salesperson "advised" me to mill with Kamis seasoning, saying that you can reuse the bottle. The seasoning is excellent, only I almost burst, trying to unscrew the bottle cap! She took away a firebrand from one of them, poured pepper-grinds into it!
And this is some kind of Mriya

Girls, well, I have no luck with Teskoma and that's it. I have a timer in the form of a lemon, I have been using it for about 5 months - and so, it began to stop. Start it, it looks like, then stop - if you shake it - it will go again.
It would be better if I bought some noun at the bazaar - so at least it would not be a pity.
And Teskoma is not so cheap, and the quality is lame - well, or I'm so lucky

My Teskomovsky timer began to stop, too - he was only two years old. And it cost 70 UAH

And I can turn on Brown on my double boiler as a timer, and I use it, if that !?

My Teskomovsky timer began to stop, too - he was only two years old. And it cost 70 UAH

Well, we have no luck with these timers.
I don’t want mechanical anymore, I want electronic, but not Teskoma - I don’t trust her anymore - at first the mill deteriorated, now here is the timer

And I thought that only I had trouble with the timer. The orange is gone. Jams, stops. All hands do not reach to open it.

And I thought that only I had trouble with the timer. The orange is gone. Jams, stops. All hands do not reach to open it.

It is useless to open it - my husband has already done an operation for him - the cover can be removed, but the mechanism itself, where the gears are not collapsible, is shorter one-time.

Girls, there is a flat twisting spring in the timers.
The fact that it stretches over time and the timer will twist is one thing, but if it is of poor quality, and even the gears are of poor quality, then the lifetime of these timers is sharply reduced.
It's a shame that Teskoma is driving this for a lot of money.

I have Teskomovsky on a magnet - he just cheats a little, he is 2 years old.

I have Teskomovsky on a magnet - he just cheats a little, he is 2 years old.

And I want an electronic one on a magnet, BUT NOT TESKOMA - it's better to have a Chinese g ... than the same g ... expensive.

And I want an electronic one on a magnet, BUT NOT TESKOMA - it's better to have a Chinese g ... than the same g ... expensive.

All day long I'm trying to write to you, girls, so that you don't bother and take Chinese things. Often, they break in the same way that expensive branded ones, that Chinese ones, but Chinese ones are cheap and not so offensive. And my Chinese serves and nothing is done for him. And if it breaks, then I'll buy it, 18 UAH - I'll survive somehow.

Once, in Tashkent, we had such a thing for frying pans, it was very convenient to use, the chapel is called ...
I can't find such a holder, here, maybe I don't know the exact name ...
Are there such things in Moscow and how much?

I bought from us for 25 rubles, if relevant.

All day long I'm trying to write to you, girls, so that you don't bother and take Chinese things. Often, they break in the same way that expensive branded ones, that Chinese ones, but Chinese ones are cheap and not so offensive. And my Chinese serves and nothing is done for him. And if it breaks, then I'll buy it, 18 UAH - I'll survive somehow.

Yes, if you still find this electronic Chinese on a magnet - we have it in Poltava and there is no way

On Ibea a year ago I bought a timer for 2 bucks already with delivery. Highly recommend. With a clothespin, with a magnet .. round nice, you can carry it in your pocket

Oh, so everyone will still have to pay the same amount for delivery from me to them in Ukraine. Why, if you can order immediately directly and delivery is free.

Didn't think (smiley is scratching his turnips)
But personally, I have never bought anything from ottudava, you can say darkness and I don't know how to order there