Blender

Ladies! help to make a choice
Philips Avance HR1644 / 00
BRAUN MULTIQUICK 3 MQ3005
to the last they give another mashed pot
The price difference is negligible

I didn't have a Philips, but Brown was and is, I love him very much! I'm for Brown.

I'm also for brown. Unkillable and powerful.

Mommy Phillips I have brown, brown is better

to the last they give another mashed pot

Here I have it, but I do not use it. Somehow friendship with her did not go. And so I also plan to buy Brown.

[Olga]

Olga, and I really loved this crush in the old blender
Thanks to all! Ordered Brown



ladies! another question - if the motor is running on the blender, and the knives are not spinning, is it subject to repair? it happened to me with Bamiks

in one day, the no-name blender, Bamisk and the hair dryer-spit broke

Good day! Maybe someone has already bought a Hotter HX-2048 blender? are there any lucky owners? Please share information on how it works. The price is tempting and there is cutting into cubes ... there was a Braun blender, but after 12 years he ordered to live a long time ((I want at least not worse, and with cutting into cubes)

[Olga]

Olga, and I really loved this crush in the old blender
Thanks to all! Ordered Brown



ladies! another question - if the motor is running on the blender, and the knives are not spinning, is it subject to repair? it happened to me with Bamiks

in one day, the no-name blender, Bamisk and the hair dryer-spit broke

Most likely the gearbox in the attachments has collapsed. I had it with Brown. It turns out that the shredder lid could not be washed. True, in only 10 years everything fell to dust there. Maybe so here. The torque does not go further. Although it could not happen on all nozzles at once.

another question - if the motor is running on the blender, and the knives are not spinning, is it subject to repair? it happened to me with Bamiks

Vic, this is beyond repair. I have almost the same story. with chopper only. I put on a "hat" on the container, the motor is working, but the knife does not spin. But the beaters and leg blender work. The husband said that he would not work. Something was worn out there, hesitated, well, in general, I took out the Krups chopper, which was bought a hundred years ago and safely put into the pantry, it's good that it was not thrown away.

it cannot be repaired.

already thrown away! and bought a new one and am happy
but there is not a "hat", there are only knives. It was Bamiks, bought at the market for 5 kopecks. There, the knife was not removed in any way, it looks like it was repaired in order to sell. He did a little work for me and hello

Philips Avance HR1644 / 00
BRAUN MULTIQUICK 3 MQ3005

Vika, I saw it late! But you already, well done, made the right choice!
Sure that you will not be embarrassed that you chose Brown! I also had a Philips blender, and now BRAUN MQ775 PATISSERIE.
I have nothing against Filipka, I worked for a long time, pleased me and, in principle, coped with what I wanted from him. One thing was very annoying, it was his small bowl. But only when I bought Brown, I realized what a real blender is! I'm very happy with it!
Vika, will you write your impressions of the mash nozzle? I’m always wondering if she needs me or not? Somehow I got used to doing all my life with an ordinary manual crush. But at the same time, I think she can grind fruit purees too? I always send a lot of berry puree to the freezer.

question - if the blender's motor is running and the knives are not spinning

That's just the reason why I sent my Filipk to rest. The motor unit is still working, and the knives in the blender have stopped rotating. There in the leg, and in the cap of the bowl, there is no such germtization as in Brown. Of course wash soaps, how without it? It can be seen that the water got into the inside of the leg great, over time the pin rotating the knives ordered to live long.And I also stopped holding the side buttons that connect the motor unit with the attachments, and when the whisk rotated, it fell off all the time.

and it seems that their rotation speed will normally change, and not "intellectually", like the harder you press the faster it spins, I'm afraid this won't work for me

Lyudochka, missed your post earlier. Just my model with an "intelligent" type of speed change. One button, the harder you press, the faster the rotation. If you don't press for a couple of seconds, it is blocked and you have to press the button on top of the case. At first it was very unusual for me, but very quickly I adapted and now I don't feel any inconvenience with it, on the contrary I like it.

Vika, will you write your impressions of the mash nozzle? I’m always wondering if she needs me or not? Somehow I got used to doing all my life with an ordinary manual crush.

I join the thoughts))) Just a week ago I became the happy owner of 735 Brown and the only thing that haunts me is whether I need a nozzle for mashed potatoes or not. How convenient it is to use it. I read the instructions, it says that the mashed potatoes need to be cooled a little, not to cook more portions at a time and the time limit ... Hence all the doubts began, and before that I really wanted it.

[night_furia]

night_furia, yesterday she pushed 5 potatoes without liquid and oil
everything was clumped, there were unbreakable pieces. But my hands are not tasty with any crush, and my mother is an obese crush, thin. makes a fluid substance

Girls, can anyone in the know, are the attachments of Brown blenders with a normal leg and a thick one interchangeable?
Here is Nelly's blender with a thick leg, black, and I have an old man with a thin, white one. Do the leg, whisk, chopper fit together?
Yesterday my chopper (1.5L) began to die, I got so used to it that I urgently need a new one. In spare parts it costs almost like a whole set
I want to buy a whole new blender, (stock up, I'm sick with blenders, yeah)

[night_furia]

night_furia, Margot, I have a Philips blender. There is a nozzle for mashed potatoes. I only use it when I need to cook a lot of potatoes, for example potato pies. If you make mashed potatoes in normal quantities, in principle, it is not really needed. I do not cool anything, I don’t shift it anywhere, I puree it in a saucepan, where it was cooked. If you want, then I'll take a picture of how she looks. The puree is homogeneous. There are no lumps. But much is possible and depends on the type of potato.

[eta-007]

eta-007, Svetochka, of course, I want to))) I've already changed my opinion 100 times: either I need it, then I don't need it, then I need it again ...

Here you go, Margosh! Profile you and full face - admire!

Ask if anything. I have cubes and shredders and everything in blenders.
And I only use a whisk in a Phillips and a leg

Thank you very much, probably, I still want such a crush more than I do not want

I share the results of my searches, suddenly who is relevant.
Hand blender Braun MQ 775 I ordered it on the website. ru with a promo code and with the added two-liter Percil gel, the whole order came out a little less than 4100
There is a similar 5000 blender on aliexpress with a potato crush.
Now I'll bring a link to Ali.
For your information, one large bowl, if purchased as an accessory to blenders, costs 3999

757.58173c00iNk3ja "target =" _ blank "rel =" nofollow noopener ">757.58173c00iNk3ja

And why is a large bowl convenient?
I had 0.5 liters, it was enough for me.

[Maria]

Maria, I'm just used to being big. I use graters, zucchini for pancakes, for example, or grate carrots. Previously, and chopped cabbage on it. Knead the dough (for noodles or shortbread) and minced meat.
So I have a medium bowl, there is enough of it for minced meat, and there is a small one - I chop greens or nuts there.

[Marfusha81]

Marfusha81, I use a large bowl with great pleasure - I used to chop all the blanks with it. And even now, when I'm too lazy to get the Kenwood nozzles, I use Brown. A very handy thing
And in a small cat, I chop meat or onions and garlic.

I also ordered an Element with a chopping bowl (for 3 tons)
I haven’t paid for either order yet, I’ll think.

[Twig]

Twig, come on, don't cry! Take both And then VAT will be raised with NG and gasoline will rise in price, you will regret it later

[Twig]

Twigwhat element?

[Nathalte]

Yeah, and the third one with a potato crush for Ali else! Yes?
They need an advance payment, and I don't need a crush, even though it pleases me.
Well, maybe I'll buy both two.



Nathalteand at Belka13 he is, there is a topic about him.
If anything, it costs 3500 on goodies, added Vileda's mop and applied a thousand discount.
Came out 4t blender with mop

I also ordered an Element with a chopping bowl (for 3 t

There is not a bowl, but a cup for 2-3 tablespoons of spices or meat for one cutlet. Very comfortable, although the volume is too small.

[Crown]

Crown, no, not about that blender speech. Element has one more model. Bowl 1.2L
I can't find a button to bring the link.

CroNa, no, not about that blender speech. Element has one more model. Bowl 1.2L

Oh, that would be interesting to consider.

https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=522208.0

I actually need a blender because of the chopper bowl.

https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=522208.0

I didn't think about graters. I have brown without graters.
After brown, I never got used to the element. I use brown in the old fashioned way.

[Maria]

Maria, I'm just used to being big. I use graters, zucchini for pancakes, for example, or grate carrots. Previously, and chopped cabbage on it. Knead the dough (for noodles or shortbread) and minced meat.
So I have a medium bowl, there is enough of it for minced meat, and there is a small one - I chop greens or nuts there.

Veta, that word for word would confirm your words! I can't imagine my coexistence without a large bowl, although I have a bigger bowl, 2 liters from the MPM blender.
But the Brown bowl is in constant use. Yesterday I grated 2 zucchini and 4 large apples for pancakes in seconds. For herbs, garlic, I use either a small 0.5 liter from Phillips, or an average 0.75 liter from MPM. But yesterday there was a large Brown bowl on the table, close at hand. And there was an urgent need to chop a little parsley, dill and garlic into fried fish. By inertia, I threw it there, then I already thought - it won't grind, it will only smear on a bowl! But she turned it on and crushed everything perfectly. Not in mashed potatoes, of course, small pieces came across, but that suited me.
Twig, Veta, congratulations on ordering a new Brown! I translated your price into our hryvnia, a very wonderful price for this particular model! We sell it much more expensive.

Well, this is a stock today, black Friday type. You have to participate.

And I (sick in the head) again see the Element multicooker at a great price and I want to. But these shops do not send to us. And the blender has already been bought for a long time.

Ol, and you have 01 and 03 Element.

[Marpl]

Marpl, and I still have a dacha and a mother. And an extra bowl would not be a problem.

Okay then. With these prices, it is easier to buy a MV in its entirety than a separate bowl.

see the multicooker again Element

And where? I didn't succeed in the last flash mob))

[Anna1957]

Anna1957were on

Girls, Oursson store has a Oursson-HB 6070 blender with a cube cutter priced at 3.495. 50% discount on it from the previous one. How do you think to take it or not? An unfamiliar company (although there are already 3 pressure cookers from Oursson) with which I am satisfied, but somehow I did not come across the rest of the technique such as a blender. I read reviews about it like a 600 watt normal blender. thicket with a chopper for 1.2 liters, 2 whole shredders (circles), a whisk, a chopper leg and a cube cutter. I think to take, not to take, I especially hooked the cube cutter. Maybe someone has such a blender, please comment on the quality of its work. The price for it is still very attractive, after Black Friday it will cost about 7 thousand again. I found out about him from mailing lists.

[Valentine]

Valentine, Take it! Nice blender, convenient parking, adequate power. The price is great!

[zvezda]

zvezda, OlenkaThank you very much for your advice! You just inspired me! thanks again ! Probably I'll take it, it seems not so expensive for such a blender, while the price is such.

[valentine]

valentine, take it, do not hesitate! Kenwood has a strong and powerful blender with a capacity of 700. Here, the equipment and parking are excellent! With ANY equipment there may be incidents, but this company, it seems, monitors the quality and there is support. The reviews are all good!

[Olga]

Olga, I ordered it for 3.496 with delivery. will bring 27. on Tuesday now I will wait and wait. Thanks for the kind advice!

[valentine]

valentine, you're welcome!

Girls, boys, do we have a redmond blender with a dicing function, not a food processor, but a blender?

[Mandraik Ludmila]

Mandraik Ludmila, I just ordered it (model 2960 - 7 in one), but have not received it yet, should be delivered in early December. Then I can share my impression. I also really liked Redmond's stationary blenders with 3409 cube cutters (if I remember exactly), but they are more expensive.

[Anastasia]

Anastasia, Nastya, and where to look at them, maybe I'll look and re-order, time still allows!

Just the other day, our forum member (she rarely comes in for something now, has no time) complained to me about Radik. That the socket at the blender broke, the part that is inserted into the nozzle.

[valentine]

valentine, look at the redmond website, here

🔗

AnastasiaK, and I am considering 6 in 1, there is also a disc per cube, but it is white, I prefer the white technique

That the socket at the blender broke, the part that is inserted into the nozzle.

It's unpleasant ... the price is very tempting, otherwise my husband suggested as much as Kitchen-Aid, I counted there under fifty dollars, I can't accept this, and the service of the Kitchens is not good, as I read in the tyrnet