Multicooker Brand 37502

Good day!

I caught fire with the purchase of the cartoon Brand 37502. For several days I have been reading the forum (about the fact that I shoveled the Internet - I am generally silent), and yesterday they brought me Brandyushechka !!! Satisfied to the point of impossibility - such a cute toon - you can't take your eyes off.

I immediately decided to do something in it. I remembered that there were several pieces of manti left in the refrigerator - I think I need to put it - so that my husband could eat in the morning. She poured water into a saucepan (about half), into a greased steam form, laid out the manti. I chose the mode - Steam cooking - set a timer - for 1 hour and a delay of 11 hours and pressed start. In the morning, my husband writes that the cartoon did not work - as it stood, it is still there. He had to re-put the program, of course, without delay.

Can you please tell me what I did wrong? I am a complete newbie in using toons and therefore apologize in advance if this question has already been asked and I missed it while reading the forum ...

[Lesli2rus]

Lesli2rus , if you did everything as you wrote it, then everything is correct. After such manipulations, the dots separating the time should blink. Maybe they did something wrong after all. Or the husband got up earlier than 11 hours later and therefore the MV has not turned on yet. To test yourself, program again with a little delay, to test and see.

shl. I've had it a couple of times on Panasonic, I still don't understand why.

[Lesli2rus]

Lesli2rusProbably, you set a delay not at 11 o'clock in the morning, but after 11 hours from the moment the program was turned on. The deferral at 37502 is set over time, not over time. Here is page 19 of the manual for 37502:

Omela, thanks for the answer! Yes, I did everything exactly as I wrote. the dots blinked after setting the time delay, but there was no countdown. I was too impressed with the purchase yesterday and did not read about the countdown in the instructions, I just thought, maybe I should have pressed start after I set the timer, and then put a delay and press start again, but this is no longer logical

Tonight I'll try to just steam the water and put a little respite - thanks for the advice!

Good day!

I caught fire with the purchase of the cartoon Brand 37502. For several days I have been reading the forum (about the fact that I shoveled the Internet - I am generally silent), and yesterday they brought me Brandyushechka !!! Satisfied to the point of impossibility - such a cute toon - you can't take your eyes off.

I immediately decided to do something in it. I remembered that there were several pieces of manti left in the refrigerator - I think I need to put it - so that my husband could eat in the morning. She poured water into a saucepan (about half), into a greased steam form, laid out the manti. I chose the mode - Steam cooking - set a timer - for 1 hour and a delay of 11 hours and pressed start. In the morning, my husband writes that the cartoon did not work - as it stood and stood. He had to re-put the program, of course, without delay.

Can you please tell me what I did wrong? I am a complete newbie in using toons and therefore apologize in advance if this question has already been asked and I missed it while reading the forum ...

Good day.
Thank you for choosing the Brand multicooker.
I assume that you forgot to press the Start button. After you have selected the mode and set the required delay time, you should press Start. The fact that a program is running is indicated by a flashing colon on the display.

[Lesli2rus]

Lesli2rusProbably, you set a delay not at 11 o'clock in the morning, but after 11 hours from the moment the program was turned on. The deferral at 37502 is set over time, not over time. Here is page 19 of the manual for 37502:

Yeah, we did everything according to this instruction.I'll tell you step by step how it happened - we wanted everything to be ready by 10 in the morning. It was just 23:00. took into account that manti will be steamed for about an hour or a little more. laid the manti. set the mode - boiling for a couple - set the time 1:10 (this is what we eventually agreed on this figure with my husband), then pressed the delay button and set 11 hours (since 10 hours is already a ready-made meal + 1 hour until 24:00). The number 11:00 lit up, the dots began to flash and that's it ... It looks like I misunderstood the instructions or I don't know why then

Good day.
Thank you for choosing the Brand multicooker.
I assume that you forgot to press the Start button. After you have selected the mode and set the required delay time, you should press Start. The fact that a program is running is indicated by a flashing colon on the display.

I pressed the start button - the colon began to blink. but nothing worked ... I thought that maybe it was necessary to press the start after setting the mode? and then set a deferral? but, it seems to me that in this case the steaming program would start without delay ...

I just thought, maybe after I set the timer, press start, and then put a delay and press start again, but this is no longer logical

No, that's not right.

NAV specifically set a delay for "Steam cooking" - see, there is no countdown either. I'll wait.

It looks like I misunderstood the instructions or I don't know why then

Yes, it seems, everything is correct
Here's more from the manual: "After selecting the desired delay time, press the" Start "button. The multicooker will start working, which will be indicated by the indicator of the" Start "button - it will be on constantly. The time will start counting down on the display." Maybe, after all, "Start" was not pressed, since there was no time counting?

manna, the fact of the matter is that I pressed the start - it burned constantly, the colon blinked, but I'll try to do the countdown tonight with a minimum delay. Omela is still trying ...

Now my husband reported that without a delay in time everything worked, put it for an hour, the truth says that the minced meat tasted a little bitter, but I think that this is due to the fact that they were lying in the freezer for a long time ... and not due to the fact that not satisfied

[DOES NOT WORK!!!]

I am reporting: a postponement on the "steaming" program - DOES NOT WORK!!! The countdown does not occur, so the MB is not included.

I set a timer for 20 minutes, a delay of 30 minutes.

omela, wow !!! how so!!! Maybe only on steam cooking the delay does not work! ??!? Thanks so much for testing !!!

Maybe only on steam cooking the delay does not work! ??!?

I don't know about other programs, but it works on "Milk Porridge".

how so!!!

Nuuuuuu, this is a question for the manufacturers.

I don't know about other programs, but it works on "Milk Porridge".

Well, the main thing is that it works on milk porridge! I will try in other modes

Good day.
Thank you for choosing the Brand multicooker.
I assume that you forgot to press the Start button. After you have selected the mode and set the required delay time, you should press Start. The fact that a program is running is indicated by a flashing colon on the display.

Tell me, please, it should be so that in the "steaming" mode there is a delay does not work? It's just that the instructions for the MB in the description of the steaming mode on page 15 do not say anything about the delay.

Thanks in advance for your reply.

After reading, I also put it "on a couple" with a delay of 30 minutes. That is, as it is written, I chose the desired program from the menu - 20 minutes, then a delay, and chose 30 minutes - a total of 50 minutes. As it stood, it still stands - 50 minutes. There is no countdown. Maybe waiting for the water to boil? - but half an hour has already passed.
But before that I cooked soup on pork ribs, pea soup - very tasty. Prog. I used "languishing" twice - onions with carrots for 40 minutes, and then for 1 hour after making the soup.
Who wanted to remove the "soup"? Nope!

Girls, thank you very much! You are so great! And they helped me a lot in choosing a model. I have already read this whole Temko, but I have not read the 501st to the end. I have a 500new2 model, I have been using it since August and I am very satisfied. But I want a manual mode

I registered here to contact Vadim about the company's plans for the future:
“In the next deliveries of Brand 37502, we plan to replace the“ Simmering ”mode with the“ Manual ”mode. In the new MANUAL mode, it will be possible to program five stages. At each stage, it will be possible to set the temperature (25-180 °; step 5 °) and the cooking time (0 -10 hours).

We are also planning to add the Frying mode, to replace another mode. In this regard, the question.
Do you think this mode is necessary in the Brand 37502 multicooker, and which mode can be sacrificed for the Fry mode? "

If it will be allowed to express my humble opinion, then it is NOT NECESSARY to remove "SOUP". I really like him in this model. Frying, yes, not enough. In my model, I also fry on "Pastry", but sometimes in those 10 minutes of high temperature that are included in the program, I do not fit, I have to re-enable the mode. But if there is a manual mode, then it is quite possible to fry on it, setting the desired temperature and time. For the sake of the manual mode, it is quite possible to sacrifice the "languor" (I personally tested it once and never used it again, as I see, this mode is not very popular with others either), if necessary, setting the "languish" parameters in the same manual mode. But the rest of the programs do not need to be removed. They are already very well debugged, tested and in demand. We will experiment in manual mode, especially since the temperature setting step will be adjusted.

So, if instead of STILL there is a MANUAL MODE with a step of 5 degrees (and even somewhere they promised the possibility of three-stage programming, that is, you set, for example, 10 minutes 150 degrees, then 30 minutes 100 degrees and at the end of 30 minutes .80 g., - for ONE time, before turning on), make more letters on the display, longer than the handle at the spatula and ladle, add a minute countdown in heating mode (this is not necessary), then this will be the Multicooker of My Dream. And I will definitely buy it

After reading, I also put it "on a couple" with a delay of 30 minutes. That is, as it is written, I chose the desired program from the menu - 20 minutes, then a delay, and chose 30 minutes - a total of 50 minutes. As it stood, it still stands - 50 minutes. There is no countdown. Maybe waiting for the water to boil? - but half an hour has already passed.

Well, if nothing works out for you, then it probably should be so ...

Good day.
We double-checked the steaming delay.
We apologize to you, but this drawback really exists.
We missed this during testing and, as a result, did not mention it on the company's website.
Thank you for your help in finding the bugs. We will definitely correct this situation.

`I also became the owner of CF.
I just brought it to the kitchen, there was no patience to ventilate it, I washed it ten times and wiped everything at once with the charlotte. As everyone said, there was a small burning smell in the kitchen. but the desire overcame. Now Charlotte is already resting, Masha still did not understand how to turn it over, I dragged the pies onto the board and put it back, but with the other side, it seems to be baked, but have not tried it yet.
Girls, I want to make according to the recipe from the "Roast Forester" manual, I have already cut everything, and then I read the default baked goods (that means an hour) and stewing 1 hour Total 2, isn't it too much? maybe I misunderstood something again?

To urge .... it's like a joke about a mouth and a light bulb or a finger and a bottleneck. I came, read and went, nevertheless, to put

Duc and cooked the same eggs for a couple - current without sharpness!
And the kin will not be - it has already been erased!

Thank you, virgins!
Tomorrow they will bring ...
The husband was somehow distrustful - this, grit, is for some kind of merits you presents, and who gives?
Who knows if he will suddenly strangle him at night? And what about testing? : pardon: Who should you entrust to before it's too late? Toka Mane with Skates!

[MariV, VS NIKA]

Girls, I want to make according to the recipe from the "Roast Forester" manual, I have already cut everything, and then I read the default baked goods (that means an hour) and stewing 1 hour Total 2, isn't it too much? maybe I misunderstood something again?

that everything is fine, baking will go, watch out for the meat, stir, maybe it will be ready earlier.
MariV, VS NIKA congratulations on the stoves

THANKS THANKS the idiot's dream came true. Well this is a gift for NG
I'm so glad I can't even find a place for myself, like a cat walks around sour cream, so I'm around a baby, and I'm afraid to open it, all of a sudden there all the programs are knocked down, I say the first one.
The products are on the table, after a couple of hours the half will go out, since 1 hour on baking, 1 on stewing ??
In the recipe, first fry the onion for 5 minutes. then meat until crust, add mushrooms and 100g. water mix everything with salt Close the lid and cook until the end of the program. Then peel the potatoes and add to the mushrooms after the end of the beep. Close the lid and cook with the STEWING program for 1 hour.
Maybe it's easier to fry everything in a pan, and then leave it in the MV and simmer for 1 hour? then what's the point?

Yes, it is better then immediately in a pan to the end and cook! : girl_skakalka: Why did you buy MV?

MariV, that something is not felt joy in your voice ... or are you not happy, or did not expect so quickly, or is the responsibility gnawing?

[MariV, VS NIKA]

MariV, VS NIKA Congratulations ! : If things go on like this, maybe Brand will develop a bread maker with 2 sets: the first bucket for large bread (900 and 1100 grams) and the second double bucket for two loaves of 450 grams each. And I have already promised to give my Philips HD9020 to my mother-in-law.

If things go on like this, maybe Brand will develop a bread maker with 2 sets: the first bucket for large bread (900 and 1100 grams) and the second double bucket for two loaves of 450 grams each

Then I'm the first in line to buy. This is my dream . And then after all, Panasik is my old worker, though beloved, and reliable.

[Elena BO]

Then I'm the first in line to buy. This is my dream . And then after all, Panasik is my old worker, though beloved, and reliable.

Elena BO went crazy - changes his whole Panasonic on the BRAND! mom mia, it's done ... well, we all grow out of our first love ...

SELECTING AND OPERATING BAKERY - well, sort of like here, I could not find another.

[Elena BO]

Elena BO went crazy - changes his whole Panasonic on the BRAND! mom mia, it's done ... well, we all grow out of our first love ...

Well, Panasonic HP does not do it for 2 buckets ... And what is now offered does not suit me. I want a good one.

Girls, beautiful needlewomen VS NIKA and MariV Congratulations!
I didn’t congratulate you for my joy either. Correcting myself New creative successes to you, lush, spongy, fragrant breads.
Let's show the class, we have not yet covered all the relatives, so looking at you and we might. let's catch up

MariV you embarrassed me, I do everything in a cartoon. Damn did not have time to cook, my husband came, and God bless him, let him eat up yesterday's vine, although not evening, the smell from the kitchen throughout the apartment, I still want to try a lot today, it is already bursting

Vadim and I want to get married ... such a gallant man.

But if the question is serious, does the new bread maker have a mode for baking rye bread, this is kneading, proofing and baking?

Vadim and I want to get married ... such a gallant man.

Yes, I'm FOR it, but my wife is against it
As soon as I agree with my wife, so immediately

But if the question is serious, does the new bread maker have a mode for baking rye bread, this is kneading, proofing and baking?

And Elena will answer this serious question tomorrow.

how you want to look at the stove .. and then my Kenya is breathing in incense, already riveted, riveted ..

The stove will be delivered tomorrow ...
And I did not set the eggs with a delay to cook with a delay, not because of the harm - what if the cho-thread is wrong with MV ...

[VS NIKA]

VS NIKA, MariV, girls, congratulations !!!
And about Temko ... probably you need here create it After all, there is no section "Brand Bread Makers" yet So, in the "Other Bread Makers" section. Pralna?

Well ... I created Temka ... Tutochki Welcome

Vikin baked bread on ripe dough. I kneaded it, which means, as it should be in HP, put it for proofing in Brandyusha. I went up well, by 2/3 of the casserole. I turned on baking ... mln ... and went to have dinner ... And now no, to look inside, Duc I walk in circles, I don't look so that it wouldn't settle... 15 minutes before the end of the time, I decided: “Everything is possible!” ... Mommy dear dropped in! My bread rose so much that it stuck to the lid ... I had to scrape it off, well, from natural opal a bit. Added time, total time 1.40 min.

Here's what happened ... The dough is steaming strongly, next time I will bake, most likely, without a valve.

Size:


Heel:


Incision:

Good day! I'm a newbie, I'm racking my brains, I haven't made a choice yet (between Redmond RMC-M4502 and Brand 37502) I'm embarrassed that the Brand model does not have a "frying" function or can I somehow fry without it?

We fry in Baking

Good day! I'm a newbie, I'm racking my brains, I haven't made a choice yet (between Redmond RMC-M4502 and Brand 37502) I'm embarrassed that the Brand model does not have a "frying" function or can I somehow fry without it?

Well then, first, take a look here
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=147299.0 .
If that suits you, then ....

Good day! I'm a newbie, I'm racking my brains, I haven't made a choice yet (between Redmond RMC-M4502 and Brand 37502) I'm embarrassed that the Brand model does not have a "frying" function or can I somehow fry without it?

yes, yes ... in redmond, this program is great for welding ...

Oh, thanks. I've been comparing everything for 3 days already, the choice fell on the brand, but it was embarrassing that there was no frying. But if you do everything on baked goods, then I will probably take the brand

[ASRA]

ASRA In Panasika the same there is no frying, so all frying, frying (chicken, for example), are made on baked goods

[ASRA]

ASRA In Panasika the same there is no frying, so all frying, frying (chicken, for example), are made on baked goods

in YUMMI they also called frying baked goods. T. H the absence of the ZHARKA program in the title, does not mean anything else

... But if the question is serious, does the new bread maker have a mode for baking rye bread, this is kneading, proofing and baking?

Good day.
For rye bread in the Brand 3801 bread maker, the following program is provided:
preheating food to 20 degrees - 5 minutes;
dough kneading - 5 minutes;
rest - 5 minutes;
dough kneading - 5 minutes;
rest - 10 minutes;
dough kneading - 10 minutes;
rest - 20 minutes;
kneading - 20 minutes;
dough rise - 35 min;
dough kneading - 10 sec;
dough rise - 35 min;
dough rise - 40 min;
further baking and heating.

But if you decide to cook rye bread differently, then the "Manual mode" will help you with this.

Man, well, and I got you bread !! Just king size

And I did buckwheat on a delay, on the Express mode, it turned out great, so crumbly, grain to grain

[Elena Br]

Elena Br based on theory and, especially practice, rye bread needs 2 short kneading (or 1) and a long proofing, baking 1.05 h. Here's a field for action.
HP already has its own Temka THOUSAND HERE