vatruska
Mandraik Ludmila, stirrers came with ali. None of it comes-and-it ...
Girls, don't order there! Buttercup, there are no complaints about you! But what a bad luck - for the second time on the Internet I order and the second time in flight !!!
Mandraik Ludmila
That is, they do not send the same as in the picture?
vatruska
Buttercup, such, but inside the protrusion is higher than in the original, the mixer does not sit on the shaft to the end - the gap is 0.5 cm.
Mandraik Ludmila
Svetlana, I'm sorry, but it was written for Panasonic
vatruska
Buttercup, I saw!!! Therefore, I wrote that there are no complaints about you! There are a lot of thanks and reviews, including from the owners of the 257th model. But I was "lucky" once again.
Wit
Can I have a photo of the mixer and the ledge? And in the established form too.
vatruska
Vitaly, you are welcome. I apologize in advance for the quality of the photo - the camera in the phone is not ice.
Help with choosing a bread maker
Help with choosing a bread maker

Palych
vatruska, and turn it over? Like teeth down?
Svetlenki
Quote: Palych
Like teeth down?

Oh how! I never would have thought. I always put the prongs up. What is the right way then?
vatruska
Palych, kidding ???
Svetlenki, ran away with a specialist and tried to put it - it does not climb, an infection! The outermost tooth of the agitator does not give! Scrapes about the bottom ...
Now I measured it, it seems, the inner diameter of the shaft in the mixer is less by mm, but I'm not sure - there is no caliper.
Palych
Svetlenki, on one side there is a boring, on the other a slot, bored down .... if you put it "upside down" it is clear that it will not sit completely. Here, try to turn any scapula ... the gap from the bottom of the little finger.
In the first photo, the bottom is facing us.
Ok, barbell, tomorrow, measure everything, diameters, heights ...
Mandraik Ludmila
No, no, the standard one is pronged up. Otherwise, it will simply be removed from the shaft during kneading, even if it did not touch the bottom with the longest prong.
fffuntic
seemingly normal, but in the photo except for the main protrusion sideways his, the main desired protrusion, some left nodules, which the original scapula does not have, maybe they interfere and they just need to be cleaned up. In the photo, they actually reduce the required diameter. Maybe they cleaned up the scapula poorly, left excess metal? The protrusion should be one and the seat should follow the shape of the shaft.
If there is an original normal scapula for any test, then you can see the seat, it is the same for everyone. Or at the store. And in general, the idea of ​​a caliper is correct, we could also measure our values.
Sedne
I, too, once ordered a scoop for rye dough and it also did not fit, but for a wheat village.
Mandraik Ludmila
My mother bought a panasik on Avita and he did not have any shovels at all, I bought her a set and a supply for myself, or rather, I then gave my shovel for wheat, and then bought 2 sets of 2 shovels. Both approached True, before that, I ordered a spare parts store from us on Juno, my son went to pick up and here that scapula is somehow left, it normally sat on the shaft, but flew off during the kneading It is now lying around idle.
Wit
vatruska, pictures are good, informative. In my opinion, this is a marriage. Such things are simply returned to the seller with the requirement to change them to normal. And attach a photo of a normal one, of which there are plenty on the Internet. There is one suspicion. Take a photo of the shoulder blade from the side. I want to make sure. And then ... we'll see.
Alex100
The shovel seems to be bought on Ali? then what questions
Mandraik Ludmila
Quote: Alex100
The shovel seems to be bought on Ali? then what questions
On Ali, you can get at least a refund of money, but for this you really need to take a picture.
vatruska
Vitaly, good evening!
Sorry for the delay, but the phone stubbornly did not want to connect to the computer ... not otherwise, in a share with the seller from Ali I do not know what kind of perspective you need.
Help with choosing a bread maker
Help with choosing a bread maker
Wit
Svetlana, Goodnight! Now definitely some kind of garbage.If the scapula is raised so high above the bottom, the kneading will not be normal. I suspect that the scapula is from some other bread machine, with a longer axis. Try to exchange. Just describe everything to these boobies in detail and with dimensions: the height of the axis of your HP and the height of the mixer sleeve they sent. If this mixer were lower (with a gap of at least 1 mm), then it would be possible to find a way to block it on the axis so that it would not fly off during mixing. And so ... Give them back.
Good luck to you!
Marfusha81
I understand that all Panasonic fans are here.
BUT this bread maker is big for me. Was, but we parted.
Unfortunately, the little ariet that I praised died in six months of not intensive use.
I am looking for something compact in size. Reliable is desirable.
Already the entire Internet has been overcoated: either they do not sell, or they are not very good in terms of characteristics, or they are too large in size.
Palych
Marfusha81, not all fans. Check out this model.
Bread maker Gorenje BM900 WII
Wit
Quote: Marfusha81
BUT this bread maker is big for me.
Large in size or baked?
Marfusha81
Quote: Wit

Large in size or baked?
Both in terms of baking and in size: it does not fit into the only free space on the shelf.




Thank you. I'll take a look.
vika2019
Hello, help me choose a bread maker up to 4000. I looked at this, MIDEA BM-220AP-W Bread Maker, are there any owners of this brand? As for the quality ..
Panasonic is not affordable for our family ((
$ vetLana
vika2019, https://Mcooker-enn.tomathouse.com/in...897.0
I did not find exactly the same as you wrote, but maybe this topic will help. Good luck
kartinka
I ask for help! !!! I didn’t think too much about HP — I’ve never seen it at work and I didn’t eat bread — none of my friends. Although many bake occasionally in cartoons or ovens. So do I. Although it becomes difficult to knead .... Now we buy mostly bread. I accidentally saw one in VAT at a discount, the price is 3 thousand, I can't sleep for the second day, maybe I need it? HP is called DEPP BRM 1333. PLEASE, I'm waiting for advice! Or take, if normal, or add and buy something reliable? I want a bread maker at all, but now I did not think to buy, so I don’t know anything at all, I just started reading ... It looks wow, small, compact, only a slight backlash of the top cover ...- does not bother what to do - I do not know. ... my husband and I, the children come in, we love wheat-rye or grain bread, the one that seems to be healthy .... although I do a lot of baking, when I bake, I do it with fiber, additives. .. at home 2 multi-staff and elik. Or buy a kneader (also a dream) and calm down?
Palych
Quote: kartinka
slight backlash of the top cover
this is normal, not critical.
Mirabel
Marina, Marin! If the Bread Maker, then only Panasonic, let the old model be, they are all gorgeous!
Fair! I’m far from my first bread baker, but everything that was BEFORE ... it was many times worse.
a dough mixer also does not hurt, as I think, and you can buy everything at once.
Svetlenki
Quote: Mirabel

Marina, Marin! If the Bread Maker, then only Panasonic, let the old model be, they are all gorgeous!
Fair! I’m far from my first bread baker, but everything that was BEFORE ... it was many times worse.
a dough mixer also does not hurt, as I think, and you can buy everything at once.

I will fully support it. Marina, you are such a hostess-needlewoman, you cook so many tasty things. And the Panasonic will give you great bread itself, as you work out the process. The topic of this bread maker is very strong on our website. They will help, they will tell ... If you want, they will teach, but you do not want

I have 2501. Hard work and always a great result.
Mandraik Ludmila
Marina, Panasik, only Panasik, he is my third hp, I regret that I have been hungry for a long time and bought cheaper. I have a Panasonic2511
Mirabel
Quote: Mandraik Ludmila
that I was hungry for a long time and bought it cheaper.
PPKS!
kartinka
Palych, Mirabel, Svetlenki, Mandraik Ludmila, thanks for your participation and admonition. Today I decided to go to hyper, where the assortment is larger, to look again at this Dext or how it is correct. ... and left .... with a small 3L sv polaris 1203, the sellers pressed me from all sides, and I ... thanks to the forum I remember this model for a year already And I also broke the price, all the more just buying it without delivery to the city ... I kept it in my head for a long time, but I thought later. (Lord, the third cartoon ... is it me ...). How good it is that you are, now you need to decide on the xn model, probably something simpler. ... and line up your Wishlist.
Ps and if simpler, what model do you want?
And yet, there are heaps of goods in the store, the sellers endure the brain with such delirium that, if you do not know, you can get started.Thanks again to you all for our forum

amateur goth
Hello, please look at LG
We sell a new bread machine to Yulia in Samara for three thousand ..
kukuin
Quote: Mandraik Ludmila
Marina, Panasik, only Panasik, he is my third hp, I regret that I was hungry for a long time and bought it cheaper. I have a Panasonic2511
I support - my sister Panasonic works without problems, but for me (Stadler Braiker Form Two is called, it cost comparable, bought almost at the same time) - I have changed the sleeve (sliding bearing) twice.
Palych
Straight sect "Witnesses IePanasonic "
$ vetLana
Quote: Palych

Straight sect "Witnesses IePanasonic "
Yes, we are. Mountain behind Panasik.
kartinka
Apparently there is no need to reinvent the wheel. When so many people are justified in favor, it is better to raise money. From part of what I have read, my head is spinning, I just remember offhand what is better without a dispenser, if you look around 10 thousand - is it normal? Or prepare for a larger amount (and wait for a discount)
Mandraik Ludmila
Marina, Panasiks can be found on Avito at a very reasonable price, I bought my mom on Avito for 5tyr and many of ours bought used ones, from Panasiks this is not critical, the main condition is the bucket! And yes, better without dispensers. I have a dispenser for additives, but it lives on my table, sometimes I insert it to add seeds to the bread, but after the operation I take it out, so there is not much sense in it, you can also pour it on a signal.
kartinka
Mandraik Ludmila, I do not know how to buy a car. ... here he needs an assistant.
Why are they being sold?
Mirabel
Marina, And again I will fully support Luda!
I have already written repeatedly that for the new Panas I bought an old one and a poke one, but with a new bucket, very cheap. Works as well as mine. but it costs 20 times lower
Good luck with your choice !!
kartinka
Me again. The cheapest 9999r 2510, so I want to watch it live. There are also 2511. The difference in the dispenser? Or rather its absence? What else is it at 11, for which verse to pay extra? Or 10 will cope with everything - I understand that the problem is in baking rye bread, I never baked it myself, but if I buy HP, I won't go to the store anymore, but I like black bread more. .. and what else this cheapest model CANNOT be able to do?
$ vetLana
Marina, bought 2511 precisely because of the rye regime, having no idea what it is. 4 years have passed since the purchase of HP. Now FOR ME this is a consistently demanded mode. I love automatic modes. But, since I bake with a large% of rye flour, during kneading, I always help with a silicone spatula so that all the flour interferes with the bun (i.e., I stand next to the stove during kneading). I describe my experience - that's how it works for me.
Good luck in choosing
Mandraik Ludmila
Marina, in my opinion, it is easy to do without the rye bread regime. Even though I have 2511, I knead rye on the prog "dumplings" and then everything in a slow cooker, proofing on "yogurt" and baking on "baking". Just like that, I have little use of the "low-yeast" mode. The supplement dispenser has recently become more commonly used, but you can calmly fall asleep on a signal. So I don't think it's worth overpaying
kartinka
Just went home, there are no Panasonic anywhere in the city, I asked in mvideo, they said only to wait, but not the fact that they would be cheap, but I don’t need it for 15 tons ..... although I was hanging on the website 2510, but in fact, no ... and I'm already tuned in. ..




Mandraik Ludmila, here I am looking simple
Svetlenki
kartinka, Marina, I have 2501 European version. There is a rye mode, there is also a dispenser. In Russian stoves of this model can it be the same? It may be cheaper because the earlier model. I am very pleased, there are enough modes. I like rye-wheat baking.

Mandraik Ludmila
Marina, do you have Avito in town? I bought my mother a new 2511 for 5 sput on Avito, though without the shoulder blades, then I ordered them from Kitak on Ali. And after that purchase I saw earlier models, even cheaper.
Mihaill
Quote: kartinka


Why are they being sold?
For example, this option, today I bought 2511 (12990r), and the old one was 256th, since 2011. Works great, bucket is in good condition.
Or they bought a new one, got a little bored and didn't want to.
Ninelle
Quote: kartinka

Me again. The cheapest 9999r 2510, so I want to watch it live. There are also 2511. The difference in the dispenser? Or rather its absence? What else is it at 11, for which verse to pay extra? Or 10 will cope with everything - I understand that the problem is in baking rye bread, I never baked it myself, but if I buy HP, I won't go to the store anymore, but I like black bread more. .. and what else this cheapest model CANNOT be able to do?
Did you go to the Panasonic branch? Girls don't bake multi-tiered cakes in Panaski. And as for rye bread, so in my opinion it is constant and in any models! Take Panas, the one for whom there is enough money. And maybe it's worth waiting for the order. I have two of them (Panas), I adore them. One survived the fall, my husband "soldered" the wounds and Pan Panasik is working, I have a model with two dispensers.
kartinka
Again, well, I ordered a "take" in the online store, I do not know what kind of store, but ... 9-10.04 they said they would bring it by courier. Payment to the courier. Delivery is free and given 500 bonuses on the trail. purchase. or order from the application and a discount of 500 rubles immediately. You just need to reveal everything and check immediately. Model SD2510WTS Price 10019r
We don't have them anywhere in our stores, what should be checked in the package? Is there one dough mixer or 2? Which is for rye dough. And how to check it, HP itself, just turn it on so that the menu would light up? Or which mode to press? Bucket-by itself I will see that it would be whole and without scratches, maybe something else?





Mandraik Ludmila, I didn't find something on Avito, now I will look, first I will take care of it later and my daughter will have to. ..

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers