Multicooker Redmond RMC-M 4502

diameters 3 liter and 5 liter single?

also, tell me, in thickness and "to the touch" the bowl of what other multicooker resembles a redmod bowl?
the store did not have a multicooker available to see / touch. Maybe they will be on Gorbushka?

I saw Phillips bowls, Borka, Panasonic, Vitek - all different

I do not know about diameters, there is nothing to compare with. I only have a five-liter.

Hurrah! Today my cartoon has arrived! I put the cauliflower on the steam. Indeed, no extra odors, easy to operate, worked wonderfully well, as if there was no long flight from Moscow to Samarkand, happy like a boa constrictor! I'll try to bake something tomorrow

thanks for trying to help, but this is exactly 45011, and its bowl is simple with a non-stick coating, it looks like a 4501 10-programmed one, apparently now they decided to improve this model and now it is 16-programmed and you can make yogurt there. It is written that the manufacturer is USA, made in China. About 4502 I know that they are being developed in Russia, and they are also produced in China. I myself have not seen her yet, but the daughter says that she is very well made

About RMC-M45011 today called and asked the office. representatives. The following was said that this model, an improved model 4501, is produced at another plant, differs from the 4502 in slightly cheaper components, namely, it was said about the cup coating, that the coating is slightly worse. This model is produced for chain stores, such as Lenta, where now this stove is sold for 6,000 thousand rubles. Warranty 25 months and all functions like 4502 and 45021 (which features a ceramic cup). So I think I can buy, but a cup is a consumable and, as many here advise, you need to have several pots and, moreover, fit from other cup models, from Polaris or something. In general, knowledgeable, tell me which cups are suitable and how much they cost.

The bowls are sold in the same place where you called and asked. Bowls from Polaris are also suitable. You can also buy bowls from NEC, non-stick good ones, and soon there will be glass ceramics (flint) and stainless steel. NECK 🔗

I already have my cartoon 45011 and I am very pleased with it. I don’t know what kind of bowl is in 4502, but my pastries are great, no complaints. And I still ordered a spare bowl for my daughter, but I don’t know which one is better

Only not ceramic - they have a lot of complaints, they quickly become sticky.

Only not ceramic - they have a lot of complaints, they quickly become sticky.

I have been using a bowl with a ceramic coating for more than a year, there is no "stickiness" ... With a non-stick, dear, she wiped it off, and the ceramics hold very well.

Thai soup

And I have my Redmond 4502, it began to hellishly exceed the temperature regimes, everything from it began to run through the valve and porridge and soups, and extinguishes by 130, sadness in general. It will go to the service three times in a year of use. The first time the power board flew.
The familiar m70 also hoisted overheating and also everything runs out of it. Well, in general, disappointment, and nothing more. Hope they fix it. I have a model that shows the temperature.

Girls, tell me where these models go to excess moisture? In Panasonic, for example, there is a small container on the side, where everything is collected, but I did not find any container for models of this design.

Girls, tell me where these models go to excess moisture? In Panasonic, for example, there is a small container on the side, where everything is collected, but I did not find any container for models of this design.

On the case of the multi there is a recess along the rim around the bowl, where condensation flows down when the lid is opened.It is immediately wiped with a napkin or rag, but there is no drip tray.

It is immediately wiped with a napkin or cloth.

You can not immediately, you can already after dinner, when you need to wipe the entire multicooker.

And I wipe it off right away, because I'm afraid that the water might get on the heating element, sometimes it happens so much. It bothers me in the multicooker ... It's bad that there is no drip tray. I have 2 multi and both have such a story.

If there is a lot of condensate, then the drip tray will not save, but on the contrary, it will pour out of it (it's small). In the groove, there are more chances to collect condensate normally, firstly, the groove is much larger in volume than the drip tray, and secondly, the groove fences will not allow condensate to pour out anywhere.
I measured - 200 grams of water is placed in the groove, which is several times more than any drip tray. And so much condensate cannot be at all due to the technical design of any multicooker, because a glass of water will not be held by any lid or valve.

Tell me, does anyone have a Redmond ham maker? I went to the Redmond boutique on Gorbushka and there are so many accessories !!! Including ham. re-read the entire thread but found nothing. Can anyone have it and how is it to be used? Are you satisfied? is it the right thing?

I myself really want this little thing! Do all sorts of roulettes ... I think that I buy in the fall, now I don't have much time to cook with her, summer - all the time with the children on the street! And on the Internet a lot has been written about them, there is also a ham 'Beloboka' And read here: https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=4095.0

I played with my ham and now it is in the cabinet. My household does not require homemade ham. While the store they like more ... And from the ham, all the same for them just boiled-stew, no matter how I tried to cook. Although, occasionally, I take out a ham and cook a small (half) ham.
P.S. But now I have found a delicious recipe and I think I'll have to get it again.

And I have my Redmond 4502, it began to hellishly exceed the temperature regimes, everything from it began to run through the valve and porridge and soups, and extinguishes by 130, sadness in general. It will go to the service three times in a year of use. The first time the power board flew.
The familiar m70 also hoisted overheating and also everything runs out of it. Well, in general, disappointment, and nothing more. Hope they fix it. I have a model that shows the temperature.

Hmm, I don’t know why you have it. My husband gave me a Redmond 4502 multicooker a year and a half ago, for the entire time of operation, not a single breakdown, and I cook in it almost every day, I myself do not want to stand at the stove. Personally, I am happy, and my husband eats everything quickly with great appetite.

Hmm, I don’t know why you have it. My husband gave me a Redmond 4502 multicooker a year and a half ago, for the entire time of operation, not a single breakdown, and I cook in it almost every day, I myself do not want to stand at the stove. Personally, I am happy, and my husband eats everything quickly with great appetite.

And what about the bowl? After a year and a half, something with the bowl (with a non-stick coating) became incomprehensible: some kind of light coating on the bottom of the bowl. I tried to wipe it off, it doesn't work. The last time I used the Frying mode for 15 minutes - frying vegetables with meat, and then turned on the Stewing mode. I wiped it off with a sponge with Fae, everything remained as it was. Is the non-stick coating peeling off? I have two slow cookers and I use one or the other in turn. So I didn't use it that often (every other time). It's a shame. Maybe something can wipe off these stains, or is it already the end?

Girls say that the Supra4501 and Redmond4502 multicooker bowls are interchangeable. Does anyone know if this is true? I need a bowl for the Supra 4501.

I don't know about the supra, but if it fits, then you can buy a bowl from Polaris. Polaris and redmond bowls are interchangeable (I use Polaris non-stick and ceramics in 4502, m70 and m150)

I don't know about the supra, but if it fits, then you can buy a bowl from Polaris.Polaris and redmond bowls are interchangeable (I use Polaris non-stick and ceramics in 4502, m70 and m150)

I confirm, on Rolaris 517 our bowls are one to one .... Tested!

And what about the bowl? After a year and a half, something with the bowl (with a non-stick coating) became incomprehensible: some kind of light coating on the bottom of the bowl. I tried to wipe it off, it doesn't work. The last time I used the Frying mode for 15 minutes - frying vegetables with meat, and then turned on the Stewing mode. I wiped it off with a sponge with Fae, everything remained as it was. Is the non-stick coating peeling off? I have two slow cookers and I use one or the other in turn. So I didn't use it that often (every other time). It's a shame. Maybe something can wipe off these stains, or is it already the end?

I also have a Redmond 4502 - I bought it through an online store. I have been using the hedgehog for about two years and I don’t know any problems at all. I cook, too, every day and not once, we have a big family, they eat everything quickly.

PS Lagri, can you attach a screenshot?

Good evening!!!!
I bought this MB for my mother before I took her away and wanted to check it out.
I want to ask you - on the Frying program for 10 minutes. it does not immediately count the time back, first it fries for 3 minutes, and then starts counting back, then fries again for 8 minutes, but for more than 2 minutes, and the time shows 7 minutes. then time back counts down normally. As a result, Frying 10 minutes - in real life it is 15-17 minutes. Is this how it should be ?? Please answer, if this is a defect, I will change it.
And in this MV, heating can be turned off at all?

The countdown in different multicooker on some programs starts after the multicooker goes into working mode. That is, after it heats up to the desired temperature. If there is a lot of liquid, the countdown will not start until the liquid has evaporated.
In this model, the pre-heating is not switched off, only manually after the end of the program.

My multicooker burned out yesterday, or rather, after work, I turned it off and for some reason from the outlet, and then it just didn't turn on !!!! Woe !!!

Marin, it was like that for me too. This power board has burned out. They changed me in the service in 3 days)) so it's okay)

Check the wire connector, it may be loose.

Thanks for your support! I checked everything and poked it at different sockets !!! If only I hadn't disconnected it from the outlet and nothing would have happened !!! I scold myself! I moved the MV to another place, and there it was necessary to go through an extension cord to the outlet (before that it was always plugged into the outlet), so it clicked and played.

And it burned out so much when I was constantly plugged into the outlet and then I took out the plug and everything kapets came. Now. As I cooked, I immediately pull the plug out of the socket.

: Friends: What's right ?! In theory, the device was turned on and it is no longer necessary to push it out of the socket, although there are many devices that have worked and turned off ...
So hard without her, even cry !!! I started a pie and flew !!!

I don't know how to do it right. I am probably doing something wrong - the multicooker is included in the surge protector and I turn on / off the surge protector key.

PS Lagri, can you attach a screenshot?

Something like that:

In general, if there is a white bloom, then they remove vinegar from the stainless steel pan (this is how I do it on Zeptor pots), but whether it is possible to do this with non-stick pans, I don’t know! Although vryatli should go bad!

My CF is under repair, I've been cooking like the old times for a week now !!! So she is missing!

This bowl has a two-layer coating. Maybe the top is peeling off. These are the spots all over the bottom, but the middle of the bottom is without such spots. Actually, I didn't use it that often, I have one more multicooker - here it is constantly in use. And I regretted this one more. And I have 3 cups to Redmond.

My husband gave me a Redmont multicooker for my birthday. I had wanted to buy it for a long time, but I could not dare. Now I'm happy. Because it greatly facilitates exhausting cooking in the kitchen. In it I do everything - I cook porridge, and soups with borscht, and sometimes even biscuits for cake. I like that the multicooker is a multifunctional thing.I advise everyone to buy one.

they gave me such a slow cooker for the new year. I'm just in awe of her. She helps me save time in the kitchen. Now I just load all the food into her and she cooks herself. and during this time I can do a lot of things. Now I have time to do everything with the child and around the house.

I want to share my disappointment with the service at Redmond !. The board burned out at the MV, was taken to the service, and the manufacturers do not want to send the part for warranty repair. Already 45 days have passed and everything is quiet! So there will be a return certificate ... MV worked for 8 months, there are no complaints about her work, she prepared everything well ...

Hello, I have a few questions:
1. I want to steam rice in a slow cooker. I remember there was a container in the double boiler, what can be adapted for this multicooker? I want to steam rice and turkey at the same time
2. Which bowl comes with the 4502, which cover? I have a black inside and a red outside with a pattern

[Mar_k]

Well, they repaired my multicooker .... Not even 3 months have passed! I called and wrote to everyone who could be in Contact and Support. They did it in 1 day, and the most interesting thing, they said that there was no key for repair and we had to order it, but came home like a NEW key is new and works, even the cover was pulled up, it does not jump off now! And we'll take the key in reserve as soon as it comes! At first glance, I thought that it was not mine, but when I looked at the Heating Element, I immediately recognized - by the birthmarks!

Mar_k, Marina, congratulations! I share with you your joy. I know how unpleasant it is when yours, one of your favorites, is out of order (she herself experienced it with the x / Mulinex stove). The "repair" was long, but the main thing is everything is in order now. Let it serve you regularly for a long time and delight you with delicious dishes!

Marin, well, we finally solved your problem)) congratulations !!!!

Thank you! And if it weren't for your 'kick', I probably wouldn't have received it for a long time!

Good night, 4502 users! Help with advice, a properly working saucepan began to turn off the EXTINGUISHING mode itself. It is filled strictly according to the Bigus recipe from the booklet, the EXTINGUISHING mode is turned on, the time is displayed for 1 hour, then the countdown begins, but after reaching 55 minutes, it turns off and switches to the HEATING mode. I must say right away that water was not added, it was not prescribed according to the recipe, and even when extinguishing enough liquid was always released. At least earlier. To start to get upset or is there a hope that this is not a breakdown?

Good night, 4502 users! Help with advice, a properly working saucepan began to turn off the EXTINGUISHING mode itself. It is filled strictly according to the Bigus recipe from the booklet, the EXTINGUISHING mode is turned on, the time is displayed for 1 hour, then the countdown begins, but after reaching 55 minutes, it turns off and switches to the HEATING mode. I must say right away that water was not added, it was not prescribed according to the recipe, and even when extinguishing enough liquid was always released. At least earlier. To start to get upset or is there a hope that this is not a breakdown?

Try to unplug the plug and insert after a while - it helped me a couple of times.

Good night, 4502 users! Help with advice, a properly working saucepan began to turn off the EXTINGUISHING mode itself. It is filled strictly according to the Bigus recipe from the booklet, the EXTINGUISHING mode is turned on, the time is displayed for 1 hour, then the countdown begins, but after reaching 55 minutes, it turns off and switches to the HEATING mode. I must say right away that water was not added, it was not prescribed according to the recipe, and even when extinguishing enough liquid was always released. At least earlier. To start to get upset or is there a hope that this is not a breakdown?

Your problem is not a problem at all. This is the MB setting. If there is not enough liquid at the initial stage of extinguishing, overheating occurs and the MB goes into a blackout within the first 10 minutes.
If the recipe contains juicy vegetables, just simmer them for 5 minutes, they will let the juice out and you can turn on the stewing. This is if you do not want to add water. Or just pour in 40-50 ml of water.

Good day everyone! MV users (autumn 2012) please tell me, in the Multi-cook mode, the time countdown starts immediately after switching on or after the temperature matches the set one ?! It seems to me that, before replacing the board, the countdown began immediately!

Marin, on a multi-cooker, counts down after reaching the set temperature.

Marin, on a multi-cooker, counts down after reaching the set temperature.

Thank you! And I did not even notice, although I often cooked on Multipovar! I’m strange, I worked for six months, but I didn’t notice

Well, it happens, you get used to it and you don't remember what and how, you do it automatically))
And I just paid attention to it, maybe I rarely used a multi-cook))
Yesterday I took out a radish and decided to check it, otherwise it has been standing for 4 months and does nothing. I fried a chicken, it turned out very well)) generally works

I try not to forget him! I don’t buy a basically non-stick bowl for Shteba! Yes, and I like to make compote in it more, I put it overnight, without sugar, and in the morning it infuses very well! And so everyone plows - one side dish, the second meat, and the third camp and pastries are solid pickles ... It gets used to good quickly !!!!

Yesterday we turned off the light, and there was a biscuit in the MV, it took only 20 minutes to drink and BAM and no light! I thought about putting it in the oven, but didn't! After about half an hour, they gave the light and flew to turn on the MV, and she herself, without my efforts, continued to work from the place where she stopped! The program did not reset and was restored again - I am shocked, the biscuit turned out to be good, magnificent!

Cool thing, I have 42 programs, I do everything on it. Dream!

Lamb with peas

Pasta with mushroom and chopped lamb stew in a creamy sauce

Arka, they made such a tasty treat)
I'm not parting with my Redik in any way, I'm sorry to sell it

Thank you girls!
And with Redik you have to do something, or release or use. Otherwise he is sad in the box ...

Julienne with chicken and mushrooms in MV