Kenwood kitchen machine: working with attachments

[Miranda]

Miranda, even I'm dull ..

The top is a new pin and the bottom is on the medium speed socket.

I'm sorry, I didn't understand the answer ..

[Money]

Money, click on "Quote: Miranda on Jan 19, 2017, 02:41" is transferred to a post where it is written in detail.

[Miranda]

MirandaThank you very much for what you were looking for!

I did not notice,
what is the link active

looked at the price of this drive rod
can someone tell me: I want to use food (which is KAV, for a high-speed socket) and on the middle socket, is the adapter adapter suitable? he seems like the opposite ..
But I have such a problem that when a processor with graters is on a high-speed socket, then the result is not ice due to the high speed? on the cache itself, the regulator for min.
I have 020 to 1500.

[Money]

Money, fits.
But, here, it seems, there were no people who had two options for this pin. Only if the neighbors meet and check-experiment. For the first time such a review that the high-speed socket does not like something as a result.

[Miranda]

Miranda, Aha, I don't like it. that's for sure. I think it was not for nothing that initially this nozzle was at medium speed. High sk. only with knives is good, and when the graters are standing, pepper-onion-tomato all strives to fly out. immediately you need to cover it with your palm, while you take the pusher, the shavings are already fine. Why then different graters? the result is practically the same. And with carrots, it's a song in general, it's tough, the grater will bite sharply, the cache already stops, you only need to serve in pieces. And above the grater is full of small vegetable shavings.
Someone has already asked for the strong vibration of the food. I feel sorry for him, it will still crumble or God forbid anything falls off.
Slow down. I think there will be no problems, but the result should definitely be better.
So, I will buy an adapter. check.

Yeah, I don't like it. that's for sure. I think it was not for nothing that initially this nozzle was at medium speed. High sk. only with knives is good, and when the graters are standing, pepper-onion-tomato all strives to fly out. immediately you need to cover it with your palm, while you take the pusher, the shavings are already fine.

Speed ​​controller not working?

I think it was not for nothing that initially this nozzle was at medium speed. High sk. only with knives is good, and when the graters are standing, pepper-onion-tomato everything strives to fly out

But the speed can be set from 1. Why set it so high that everything crashes? My (1500 vt) food processor with graters works fine, almost nothing remains on the disk.
I am not too happy with the knives in comparison with an old low-power processor from another company: it cut / chopped evenly, made minced meat in it. This one did not fit for minced meat: it cuts unevenly, until all the pieces are chopped, some turns into an indistinct puree.
For the rest (pate, chopped dough, graters) - a great thing.

I came to all of you with great gratitude! Thanks for your advice. To the one who wrote that in your house you can buy Kenwood 096 on stickers. After a week of collecting stickers for all people, I became the owner of this miracle 096! I am glad unspeakably! Finally, my hassle with a liquid mass for marshmallows and an imperfect dough will end, because the joints hurt. I have only one question and an important one for me, where to buy a cleaning pad? I really need it, I looked at a lot of shops, everywhere on order and it’s not clear whether they will bring it, but I want it for sure

[elenas]

elenas, look at Avito, they sell new ones. I just don't know whether they will be suitable for yours or not.

[elenas]

elenas, Congratulations!
Great car.

And how much did it take with the stickers?
I never take stickers, because I don’t collect them, but it never occurred to me that they might be useful to someone so cool!

Miranda, it turned out 44,990 is standard and 54 stickers were needed. from special stages I need a wiping sieve and possibly a souffleka (I don't know why yet 🤦♂)

[elenas]

elenas, well!
The multi-chopper is my favorite nozzle

[NatalyaB]

NatalyaB, Paul I,
Well, comrades, I wrote right away

on the cache itself, the regulator for min.

there is nowhere more minimal, it turns off itself.

This one did not fit for minced meat: it cuts unevenly

here, I have a feeling that food is just peddling, so it is sausage on high-speed.
Nevertheless, the KATOOME adapter does not fit, it is put on a low-speed socket, but I need it on a medium-speed one. The hike will have to look for another stock ...

Dear owners and owners of machines with 6L bowls, using wiping sieves for Chefs (with a thin pin)! Please write, did you have any problems over time due to the use of a non-native nozzle, does it break the thin pin of the landing socket? I'm going to buy, but in my city there are only those available, for Majors only under the order, I'm afraid, while I wait for the order, there will be nothing to wipe

Dear owners of induction, please tell me if your sound changes when the hook is working with a dense (dumplings) dough. Everything starts out fine, and after about a minute the sound changes, so it's kind of hard for him to wrap it all up. You are welcome?!

[SNadia]

SNadia, I have an intermittent sound at a speed of 3-4 (this, they say, for everyone) and at low speed too. I try to choose the speed at which it works without jerks.



AlenKo65, the flight is normal, nothing is broken up there. The other day I was grinding a plum with bones.

Twig thanks a lot! I kneaded for min. While there was flour, everything was fine, but as it mixed up with howls, but the hook interfered in the same way, outwardly it worked fine. The flour was really 900 gr. Well, I will hope for good. thanks again

These are the nozzle and stirrer, as suggested for the blender, in fact, what are both for? Couldn't find it?

[elenas]

elenas, the top one is like a stirring stick for a blender, about the bottom one - I didn't have one

[elenas]

elenas, ah, pictures appeared.

The top is for a blender.
The lower one is for the food processor.

In the instructions, everything is written, with pictures!

[elenas]

elenas, in your pictures I saw a stirrer stick for a blender, a whisk attachment and a pin for a food processor attachment.

[elenas]

elenas, the manufacturer does not leave the buyer alone with a huge box.

There is a thick instruction with text and pictures. Each nozzle also has instructions. There are books "My first steps", etc. Sooo much accompanying information. It was faster and more useful to scroll through these particular texts, and not the forum.

And the complete set and what for what, and it is completely better to study BEFORE buying. To check, etc. On YouTube there are heaps of unpacking videos.

Girls, tell me. Here in the subject already wrote somewhere, I can not find it. What kind of attachment do you need to whip the cream to make homemade butter?

[ludmila_27.79]

ludmila_27.79, Lyudmila
I whipped with a whisk

Girls, dear ones, I again have a big request to all caring people:
The trouble has come to the house of our Marinochka.
Please don't pass by!

I whipped with a whisk

I also whisk. With a gradual increase in speed. Up to almost the maximum.

Girls, at the Kenwood site. ru appeared a souffleika, price 1990 + delivery, you can order.
it can be found under "Sense / XL attachments" and "Titanium / XL attachments"



Ordered, will be delivered on Monday

Girls who will order on the Kenwood website - use a 15% discount! Everything goes according to the EXTRA15 promo code, I got a discount 1691

Ehhhh! I missed

[Marinuly]

MarinulyIf you haven't paid, cancel and order a new one right there

[Money]

Money, Tanya, I already called, got a little outraged, everything was counted at a discount. Thank you

[Marinuly]

Marinuly, Marina

[Tatyana]

Tatyana,



I've been waiting for her for a long time ...

Soufleika is a thing!
I am sometimes lazy and like with my hands faster. But the other day I was not too lazy - and fell less than when with my hands. I advised myself that sometimes I'm too lazy to take it

HELP!!!!

Bought Cooking Chef KCC9060S can't turn on induction.
We set the temperature, press the heating, the heating turns on, the board shows that it is working,
within 10 sec. turns off and the error IH-08 appears on the display.
We set stirring with a delay, it also turns on for 10 seconds. induction, then gives error 07.
And induction never works.

Are you wearing a protective cover?

[acteroid]

acteroid, about protection has already been asked above. Also look, the manual contains a table with errors (96 is at the very end of the manual) and a sticker on the machine with error codes

Both covers are dressed, there are no stickers on the car, in the instructions in English Error code 07, 08 may know who.
Kenwood representatives in Russia from whom we bought do not answer, since the car is new, they sent a request to the official representative!
It's a shame to save so much, buy and not use it to the fullest!

[acteroid]

acteroid, in the instructions for the car (096) I have errors 1-4, and then 9-10. Electronic instructions for Gourmet cannot be found. And what about the paper version, even in English, is there a table of errors &, I think it's really possible to translate.

[acteroid]

acteroid, we are theorists in a new car, it has different controls
Take a picture of the English. Let's try to understand the instruction where the table with errors is.

***
Found instructions in English. at the office. website
Problems on page 27 but no error name

🔗

And the usual questions are whether the head is down until it clicks. Is the protective cover worn? Is the bowl correctly installed?

But you say you did everything.

There you can still choose different power, maybe you chose the wrong one?

[acteroid]

acteroid, and turned the cup all the way?
Check everything. There is even the slightest overshoot, an under-click, and that's it - it doesn't work. It's a shame how ...

I ordered a soufflake, for some reason the discount code did not work, it is not clear how to cancel the order, I wrote in the feedback on the site to call, horror

Girls, I love you ...: girl_romashka: Thanks for the souffleika, I hunted for a long time. I ordered another ice cream maker. While the whole set will be in stock, All the attachments I wanted for now and I hope they will soon bring the ordered ones. otherwise you don't want to interfere with the biscuit manually. I will read you and look for new Wishlist, we work with caches every day. Summer is over, we will learn to make pasta.

[elenas]

elenas, Elena! Where did you order it? Why is there no feedback? If in Kenwood. ru, then the phone is free there, you can call them yourself!



elenas, call them and place an order by phone. They accept orders by phone.

They all turned away, they all went down!
Convection, that's just the point, that turns on, and exactly 10 seconds later. turns off!
If something was not worn, or incorrectly exposed, convection would not be turned on at all.
It strains that the officer. representatives from whom they took the car are silent.
Tell me tel. service center in Moscow, where these machines are repaired under warranty.
Maybe they will tell you what was done wrong, how to properly start convection.

Thank you all for your help and support.
I'd like to take full advantage of this miracle machine.

[acteroid]

acteroid, maybe this phone will do? 8 800 200 52 62 is the hotline

[acteroid]

acteroid, if it comes in handy, then my car was taken to this Moscow, st. Suschevskaya, 27, building 3. Business center "Atmosphere", 8-495-781-26-75. They also work on weekends.
you can call in 30 minutes - an hour and you will be ordered a pass to enter the territory.
The service center accepts and gives away lovely girls who only draw up the documents and can see the status of the repair order, the diagnostics are carried out by engineers who cannot be talked to. The girls are also answering the calls, maybe they will be able to check with the specialists, but I suspect they will say "bring it, we'll see."

If you are in Moscow or St. Petersburg, then the service includes a free home visit of the master.

[acteroid]

acteroid, right after the purchase, when the attachments were working, a terrible creak was heard (and without attachments too). I was terribly upset ... She took the car to CookChef, the girls managers, after my repeated calls, turned out to be responsive. As a result, another protective casing was brought from the store, the whole point was in it. They advised me in the future, if something happens to the car, call this particular phone. It seems that the master should come himself, inspect the car, write a paper. And according to this conclusion, the store changes the car without problems. But this is what I was told, how it actually works - I don't know. Phone 8 800 200 52 62

You can email them. e-mail shop @, and specify "For the complaints department" in the subject line



Alexei from St. Petersburg had some kind of problem with a new car, so he wrote to email. mail, address above. You also need to specify the date of purchase, model, order number and phone number for feedback.
And to take only the purchased car to the service is not serious. They should just replace it. Good luck!

They called from the Kenwood Ru website, introduced a manual discount, hurray the soufflake will also come to me, thank you all for your kindness and responsiveness

Girls, do you have free delivery of the soufflake?