Kitchen machine Kenwood (2)

Well, I know what your trouble is. I am writing about what I have. I sharpened my knives after discovering that they crush meat rather than chopping. I sharpened it with special equipment, but then I read that it is enough to drive the knives to dry tightly fitted to each other and everything will be fine. After sharpening, he does not even chop meat, but cuts easily and quickly. So the auger has nothing to do with it. Although initially upset with Kenwood, just like you. However, Kenwood has enough jambs for different nozzles without it. The juicer is so-so, they regretted the stainless steel for the sieve, the auger is rather weak for the auger juice press, they regretted the plastic, they made it hollow and thin-walled. But I am glad that one is less. At least for me. You can come to visit, I will demonstrate the impeccable work of the meat grinder (take the meat with you)

My knives are sharpened so smoothly that they stick to each other, like glued ones, you can't separate them. But the meat still does NOT chop, but crushes. Now in the store, they haven't changed in 12 years. Knives and augers are the same

It’s very strange. I didn’t sharpen the knives, but the meat is perfectly chopped on any wire rack!

In general, of course, thank you very much for your feedback and opinions. So I want to ennoble Ken's feelings and emotions with nozzles, but with my mind I understand that a lot of things will be superfluous. There is a good meat grinder from Redmond, but suddenly Kenkin is better.

[Ir]

Ir, I didn’t sharpen anything either, and for the 7th year I have been enjoying my grinder.

Of all the Ken attachments I have, I'm only not happy with the ice cream maker. Although, for its price, it is probably quite nothing. I use everything else non-stop, no complaints! You just need to understand in advance for yourself what you will use and what not. For example, a wiping sieve, a juicer are not relevant to me at all. But, for example, the mill, although it is rarely used, is irreplaceable for me

And instead of a nozzle, I bought a separate Kenwood meat grinder, I'm very glad, the car is a beast! I didn't sharpen the knives, but yes, as advised on the forum, twisting very strongly, I drove it out. Now I use almost all the attachments for the front nest in the meat grinder. A cube cutter with solid products (root vegetables, quince) works much more efficiently than on the main machine, a slow vegetable cutter too. Haven't tried rolling and spaghetti noodle cutters yet. After all, how wonderful, on the main machine, you make strips of dough by rolling, and on the meat grinder you immediately cut them. True, you will probably have to practice, since the speed is not regulated in a meat grinder.

Ira, before Keshka I had a separate Kenwood meat grinder. So I declare with full responsibility, they are absolutely the same !!! The only difference is that there is no reverse stroke in the Kenwood attachment. I gave my mother-in-law a separate meat grinder.

I am also quite happy with my meat grinder-attachment. True, I have 955, and I replaced the knife with a saber-shaped one, and sharpened the knives and the grates well. Really it got much better.

they are exactly the same !!!

So who argues, of course the same, but a separate meat grinder is a little more powerful, the case with the engine is cast. When, for example, a cube cutter works on the main machine with heavy products, so that (machine) "sighs and sighs", parts of the body jerk with a creak and you can see how difficult it is for it, and on a separate meat grinder the cube cutter does the same job just right. And I am very glad that I was able to unload my favorite car a little (thanks again to Ritusle for the fact that she got sick with it and I bought it).

[Sonadora]

Sonadora, Masha, I have kmx50. There is nothing to compare his work with, he whips and kneads my creations without straining.

Now I use almost all the attachments for the front nest in the meat grinder. A cube cutter with solid products (root vegetables, quince) works much more efficiently than on the main machine, a slow vegetable cutter too.

Just look, do not fill the engine with juice. Liquid easily gets inside the case, and there is no protection there. I use the KENWOOD meat grinder a lot, including for making juice, salads. The engine was flooded, the wires melted, began to smoke, but disassembled, cleaned, replaced and then everything works. Ugh, ugh, ugh. The machine is very maintainable. You should never rush to throw it away. And as for cutting meat, I don’t know, we have to try and compare with others. Or find a saber knife. I kind of saw it on sale before, but now I searched and didn't find it. I bought a whole meat grinder with a saber-shaped knife from another company (though for a promotion for very funny money).

but intellectually I understand that a lot of things will be superfluous. There is also a good grinder from Redmond, but suddenly Kenkin is better.

Do not forget that Kenwood is, after all, according to its main purpose, a kneader and planetary mixer. That's why you have to ask him for this. The rest is generally not necessary. Some attachments are good and better than individual devices, such as a screw juicer. Such a stand-alone device will now be twice or three times more expensive. Some nozzles are equivalent, such as a coffee grinder or the same meat grinder, and some are worse and more expensive than individual counterparts. This applies primarily to the centrifugal juicer. So, any choice must be made with head and mind.

Added Sunday 08 May 2016 1:53 pm

There is also a good grinder from Redmond, but suddenly Kenkin is better.

Most likely, the same, as well as from Mulinex and so on. The only thing is that you have to take an expensive segment from Redmond. Cheap shit. I had to throw out one of these for 3000.

Added Sunday 08 May 2016 1:55 pm

A cube cutter with solid products (root vegetables, quince) works much more efficiently than on the main machine

How did you define efficiency? Naturally, if you level the rotation speed.

Added Sunday 08 May 2016 1:56 PM

Ira, before Keshka I had a separate Kenwood meat grinder. So I declare with full responsibility, they are absolutely the same !!!

Does it mean the quality of cutting meat?
Or the internal structure?

Added Sunday 08 May 2016 2:00 PM

When, for example, a cube cutter on the main machine with heavy products works, that (machine) "sighs and sighs", parts of the body jerk with a creak and you can see how difficult it is for

I have Sens and I have never snapped or groaned with any products, either raw or cooked. Works easily and gracefully.

Found a great video for beginners like me, but I can't give links. Maybe someone from the old-timers will post here?
It is called "Kenwood Cooking Chef KM096 Video Presentation" on YouTube.

[about]

A cube cutter with solid products (root vegetables, quince) works much more efficiently than on the main machine
How did you define efficiency? Naturally, if you level the rotation speed.

On the main machine, I cut with a cube at 1 speed, at baboutI didn't risk it (the nest is low-speed), there is only a largeaI speed and with good quality a bowl of vinaigrette turns out much faster.

Ira, before Keshka I had a separate Kenwood meat grinder. So I declare with full responsibility, they are absolutely the same !!!
Does it mean the quality of cutting meat?
Or the internal structure?

According to the device, my MG510 meat grinder is an AT950 attachment with a personal motor.

I have Sens and I have never snapped or groaned with any products, either raw or cooked. Works easily and gracefully.

I wrote about heavy products, with the usual ones everything went very easily. Have you tried cutting quince, celery or rutabagus?

[Girja]

Girja, Ira, I giggle. But good, right?

So, any choice must be made with the head and mind.

uh huh. Need to. But to my regret, I have all purchases from the heart, not from the mind. That is, as they say, that is. But I sooo love my purchases, bought out of insane lust, and I hope they are me too.
I want a citrus juicer here. To her husband straight, you see, she seemed vital.
Here I am aiming at Kenkin.
Thanks for the feedback!

On the main machine, I cut with a cube at 1 speed, I did not risk it at a higher speed (the nest is low-speed)

We cut cubes at 3-4 speeds.

I dabble at Niser Diser plus dice. If you want bigger, please, but if you want smaller, it's so easy.
But I also think about the cube cutter. What if it will be better?

Have you tried cutting quince, celery or rutabagus?

And celery root and carrots without problems and strains. No symptoms described by you were observed. Maybe you need to check the processor?

Added Sunday 08 May 2016 04:21 PM

I want a citrus juicer

I must say that a strong and good attachment. I had a Redmond one, quite powerful, but this one feels no worse. The only thing, unlike the usual ones, does not change the direction of movement, but on the other hand, it doesn’t even slip under strong pressure.

Added Sunday 08 May 2016 04:22 PM

But I also think about the cube cutter. What if it will be better?

And why is it better? Most likely the same. And the size is not regulated. However, for us, just a good size for salads and soups and for freezing, preparation.
So, here you need to balance the price / quality. For the face value, of course, a little expensive, but for a stock or for Avito for half the price, it is quite acceptable.

[Paul]

Paul, thank you very much for your opinion! Right now, I'm very interested in a citrus juicer. Thank you. Crawling yu in search of where it would be cheaper.
You can, of course, squeeze it yourself into a glass, but it's too lazy.

Ira, I giggle. But good, isn't it?

Good, not that word! Hee, as in that joke about Zykina ("You don't have to sing, you are just on the pakhada stage. Wah!"), Keshka just needs to stand there and be beautiful, I love you!

We cut cubes at 3-4 speeds.

Pavel, I'm afraid to load a low-speed nest with speeds higher than it should be, although I have no doubt that he will pull any mode.

I crawl in search of cheaper places.

Well, for example. Quite a clear price:
🔗
we have in St. Petersburg and cheaper. Call, the seller can send.
🔗

[Rituslya]

Rituslya, are you looking for a nozzle for Kesha or just a separate one? In the same place, there are no ventures in this unit, and some are inexpensive.
I have a separate one, quite normal and comfortable, but for the sake of one orange or lemon, I don't get it, and I rarely need more. So it’s idle. And how I wanted her!

[about]

On the main machine, I cut with a cube at 1 speed, at baboutI didn't risk it (the nest is low-speed), there is only a largeaI speed and with good quality a bowl of vinaigrette turns out much faster.
According to the device, my MG510 meat grinder is an AT950 attachment with a personal motor.
I wrote about heavy products, with the usual ones everything went very easily. Have you tried cutting quince, celery or rutabaga?

The cube cutter can be used in a pulse mode, 2 kg of food in a maximum of 1 minute, take the food longer and place it in the mouth.

[Rita]

RitaIt will be much cheaper to buy a nozzle according to Avito, I asked the price, or even better, choose a separate one for citrus fruits on the Ya. Market according to reviews, and buy again with Avito. Many people get rid of the unnecessary, but this is not the case when you have to buy a new one under warranty. Well this is not a car or a washing machine for 50 tyrs. Mokhno for 1 tr. buy a new one. Well, good luck and delicious juice)))

The instructions for the meat grinder attachment installed in the low speed slot says: "Set the speed to 4.Using the pusher, carefully feed the meat one piece at a time. “I think running the low speed nest at a speed of 1 or less is an overkill.

[Vinochek]

Vinochek, Zhenya, and when I monitored the car for my needs, I did not see any negative reviews about KMIX. All metal, weighing 8 kg. kneads, whips well. Another thing is that its focus is narrower. But who needs it. And of course it costs too much for its functions (I took it for 14, so I'm fine and I'm happy).

I want to win the dispute "storage of parts does not take up much space"

My cache is not induction, but I do not think that the induction nozzles are smaller, they take up enough space, they are not small, k-shaped, so you can generally kill

[Sedne]

Sedne, it is clear that they are not small, under a 6.7 bowl, and a smaller bowl too.

I just have a specific shelf, so I need to know the specific length. There is enough width, but I don't know the length.

[Miranda]

Miranda, all these nozzles are about + -22 cm. I once measured them for something.
But they are healthy. They take a whole plastic box from the Metro.

[Miranda]

Miranda, souffleika - 23 x 15 x 24 cm. I think others are the same in length, but in width, of course, more. I can't say the exact size yet - I'm at work.

The bread maker interferes

And I abandoned the bread maker with the purchase of the kesha ... now it seems to me that she does not knead the dough. With cashes, a completely different bread is obtained ... the dough is smoother, more pleasant ...

And I don't do anything Keshenka.

I'm not doing anything either.
The last time before Easter I baked Easter cakes in company with Ken, and after that it’s just like that.
Some kind of apathy for baking.
Although I'm lying, last week I used a cube cutter for okroshka.
But in general - I rarely turn it on.
Bread in HP is easier. Everything is done there by itself.
In general, I never regret buying, but I don't use it often.
And in general, it doesn't matter to him, with such an operation I will have it for another 10 years))))

and for me both 2 hp and kenwood and thermomix work

I wish I knew what it is

This is the code of the payment system, which determines what you bought or paid for when you use any card of any bank in the world. Pharmacy, grocery, air ticket, casino, service, etc. - there is a code for everything.

You can see him in the personal account of your bank, though not all. It does not show this in Sberbank, But in advanced banks it does. Or if not mss_code in numbers, then writes in words. For example, today I went to a grocery store, I have this payment recorded not only in numbers, but also in words - Grocery stores, supermarkets.

According to the mss code, banks that give cashback determine whether they will give for this specific operation or not, or according to these types of payment (travel vouchers, for example) they have a promotion with an increased cashback.

Since February 1, Kukuruza does not give any cashback for the purchase of electronics. But in such single shops, and not large ones like Mvideo or Mediamarkta, there are unpredictable MSS, for example - "retail goods" or "house, renovation, garden".

Of course, I don't really expect to get an answer to my question, but I still hope.

Because to me this is an argument in persuasion.
For 76 thousand with the correct mss, you can get 3% KB, which is 2280 rubles. Agree, not bad, and an argument.