Kitchen machine Kenwood (2)

... what is the hook plastic is not what ??

for me, the very essence is not in the material of the hook, but in the trajectory of its action.
You can also make pirouettes with a small leg.

[Margo31]

Margo31, my messages for some reason are not saved, m now I cannot understand, according to the list, what is your answer for which nozzle) tell me, is the AT340 vegetable cutter suitable for the sensor5030 ?? with an adapter?

Yes, it does. She goes to the high-speed socket, where everyone has the same socket. Cutters and dough sheeters are not suitable. Yes, I also took it for the action, I already bought all the nozzles for Kyu.
Anya, I have a cube cutter with an adapter. But also all the dough rollers, so you don't have to constantly rearrange the adapter

Damn, the more I read, the more I get confused ... Why can't I insert links here? it would become much easier to explain

[alinapressa]

alinapressawhen she is alone, then everything is fine. But I am lazy to rearrange.

AT340 fits into a high-speed socket, no adapter required

what is the hook plastic is not what ??

The hook is not plastic. Coated metal alloy.

Damn, the more I read, the more I get confused ... Why can't I insert links here? it would become much easier to explain

Alina, you can take everything there. Only cube cutters, 644 and dough rollers with an adapter will need to be used. I'm just not comfortable. Maybe you won't be critical

Advise ?? I think to order. what is the hook plastic is not what ??

And there are no more options for this amount, Unless Kenwood. And then only in citylink, in other stores it is almost twice as expensive ...
Of course, I really and fundamentally like stainless steel, but they are only for expensive cars.
The girls over there say that these are normal

The hook is not plastic. Coated metal alloy.

Hooray .. I take it all)) girls and you are super) I'm new here .. thank you

Alina, you can take everything there. Only cube cutters, 644 and dough rollers with an adapter will need to be used. I'm just not comfortable. Maybe you won't be critical

no, it will obviously annoy me too, the dough rollers decided not to take it, it's better to buy it with a set of 3 pieces, and it's more profitable without adapters. Thanks for helping. It is necessary to decide before the morning, my brother will stop by for the opening before work ...

And there are no more options for this amount, Unless Kenwood. And then only in citylink, in other stores it is almost twice as expensive ...
Of course, I really and fundamentally like stainless steel, but they are only for expensive cars.
The girls over there say that these are normal

And it looks solid, and you can buy nozzles, but I have everything at home, a Redmond cube cutter and so on, the dough mixer I need with my hands is already tired (((

I didn't find Kenwood on the Russian page (I tried by analogy), but on the German page there is a table - what's what and with or without an adapter.
You must go to the kenwoodworld page. com and go to the german branch. There's the word Gesamtkatalog at the top. There, on pages 18-19, an overview of the attachments. And from page 69 - general overview.
Star * bits require an adapter.
If you translate anything - ask :-))

P.S. The address was entered with an interval - otherwise, beginners are not allowed :-(

And it looks solid

Have you watched the video review? I even liked it straight, it looks pretty decent and the power of 900 watts seems to be enough for whipping and kneading.

then you won't collect and disassemble it to get juice every day.

we have a stationary one, I don’t remember when we got it the last time, it’s so infuriating to disassemble / wash so many things, because of 2 glasses of juice ...

we have a stationary one, I don’t remember when we got it the last time, it’s so infuriating to disassemble / wash so many things, because of 2 glasses of juice ...

Yes, I already ordered it)) On the 14th they will bring it, God forbid)) oh, after my mixer 450 W BOSCH, this is super for me))

already ordered it

Well, right for 15900? On the site, it costs 34.500 rubles now and in electronics 44 thousand

the question is still ripe, how is the AT 340 vegetable cutter fundamentally different from AT 643, are they interchangeable or complement each other ??

[ellanna]

ellanna, quite a stupid question - how to fasten?
And yet - how thick are you rolling?

I put it next to you and you can pinch it ... Like a dumpling ...

no, it will obviously annoy me too, the dough rollers decided not to take it, it's better to buy it with a set of 3 pieces, and it's more profitable without adapters. Thanks for helping. It is necessary to decide before the morning, my brother will stop by for the opening before work ...

Eh, Alinochka, I won't console you here either. I also took this particular set. The set contains all AT attachments. There are no other sets for sense. If you only buy separately at KY

I also took this particular set. The set contains all AT attachments. There are no other sets for sense. If you only buy separately at KY

some kind of conspiracy ...

Well, right for 15900? On the site, it costs 34.500 rubles now and in electronics 44 thousand

Why did it happen? top shop 45

the question is still ripe, how is the AT 340 vegetable cutter fundamentally different from AT 643, are they interchangeable or complement each other ??

Kah 643 me - it fits the senses. In stores AT643 (with adapter).
643 per low speed slot is suitable for hard ingredients such as chocolate, hard cheese, nuts, vegetables. Designed to reduce friction and hence heat. This is for chocolate for desserts.
340- to a high-speed socket without an adapter will do. Allows you to continuously cut a large volume of products. She is very nra to me. Even when the food processor came, I thought I would sell because of the duplication of disks. No, I left her
To your question, I will answer that 643 will not replace the 340 nozzle. It will most likely complement

Why did it happen?

In citylink there are such fabulous prices. Maybe an old delivery

And I did not like ax643 at all. It is very large, hard to wash, and the worst thing is that my favorite grater is not there (there is either very small or rather large).
As a result, I sold it and enjoyed using my usual little vegetable cutter Mulinex.

AT340 is not bad, but for me it is relevant mainly in the harvesting season. For daily cutting, it is easier to use a moulinex and a vegetable slicer (or a berner)

Oh, indeed the price in some stores is tempting.

Good people, but tell me if I understand correctly that many add. Can the Major Classic KM636 tips be inherited from the Induction Cooking Chef?
I just now thought, shouldn't I take it in the citylink, and slowly overgrow with nozzles, and on occasion change to induction. Tell me what?

Can the Major Classic KM636 tips be inherited from the Induction Cooking Chef?

Of course

[vernisag]

vernisag, and from a series of sensor nozzles fit a kenwood with induction?

alinapressa, will not replace the multicooker cache. Heating is more of an auxiliary function. Let the girls correct me)))

May I correct it, I have no stove at all now. No. Available pressure cooker Scarlett, multi-cooker oven Kuzin and Kesha induction. Well, the oven. So Kesha perfectly cooks dumplings, pasta, borscht, soups. Since water boils the fastest. Fries, no questions at all, since it also stir well. In short, I just don't need a cartoon.

And by the way, about rolling and pizza, I roll it out on a large baking sheet, sometimes into two. So manually is long for me.

[vernisag]

vernisag, and from a series of sensor nozzles fit a kenwood with induction?

No. But if you now take "AT" for low-speed, this is a cube cutter and dough sheeters, wake up to use the adapter, and then they will go to induction

And from the sensor series, will the nozzles fit the Kenwood with induction?

Only those with AT in front of the number

Of course

God, this is a temptation!

I'll start work with my family tomorrow morning.

I HERE my machine MAZHO))) I'm so worried)) Thanks for the advice)

[Nara]

Nara, Will they bring it today?

Hello everyone, welcome to your ranks!
Oh, and I was tormented with a choice. I didn’t sleep for two nights, I had to urgently decide until the action in Mvideo was over.

Can I ask you questions right away?))
1) ice cream, my son 2.8 began to demand when they had not yet bought it. Recommend a recipe (two yolks disappear).
2) Did someone buy on a stock already in January? Did you manage to order a recipe book and a 5-year warranty, or is it only for those who managed to buy before NG? Are Kenwoods so categorical?

Hello everyone, welcome to your ranks!

Congratulations!!! Let it serve for a long time and inspire new culinary feats !!!
HERE: https://Mcooker-enn.tomathouse.com/in...ption=com_smf&board=198.0

[Margo31]

Margo31, thanks for the congratulations and the recipe! I'll try))

For the first time in my life I was going to make ice cream. I really don't want to embarrass myself in front of my son and husband.
Girls, tell me, because if you do it in an ice cream maker, then the point is that it freezes and interferes, do I understand correctly? And the ice cream recipe itself is made separately without using a kitchen machine. Those according to the recipe are mixed, heated, something else is added ... Then cool this mixture and put it in an ice cream maker (I have a nozzle), and the ice cream maker should first stand in the freezer and cool well.
I got the point?
I really want to pamper my son with ice cream in the evening. Thanks to everyone who responds !!

The ice cream maker must be in the freezer for at least 18 hours before using it. You make the mixture where it is convenient for you (I mix everything with Kesha). Installs an ice cream maker, turns on and pour out the prepared mixture, it is not necessary to cool it first. And knead for 30-40 minutes. Sometimes it's faster. The ice cream will turn out to be soft and in order to bring it to the final condition, transfer it to the container and into the freezer.

[Ann_net]

Ann_net

For the first time in my life I was going to make ice cream. I really don't want to embarrass myself in front of my son and husband

With this, you will definitely "not miss"!
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=66440.0
The same, a little more "interesting" - tastier! And with yolks.
Ice Cream Strawberry Cream in the Kenwood Kitchen Machine 086/096
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=439373.new#new

[Nara]

Nara, Will they bring it today?

no 14th))

The ice cream maker must be in the freezer for at least 18 hours before using it. You make the mixture where it is convenient for you (I mix everything with Kesha). Installs an ice cream maker, turns on and pour out the prepared mixture, it is not necessary to cool it first. And knead for 30-40 minutes. Sometimes it's faster. The ice cream will turn out to be soft and in order to bring it to its final condition, transfer it to a container and into the freezer.

I make a delicate delicious and in molds without an ice cream maker.

For the first time in my life I was going to make ice cream. I really don't want to embarrass myself in front of my son and husband.
Girls, tell me, because if you do it in an ice cream maker, then the point is that it freezes and interferes, I understand correctly? And the ice cream recipe itself is made separately without using a kitchen machine. Those according to the recipe are mixed, heated, something else is added ... Then cool this mixture and put it in an ice cream maker (I have a nozzle), and the ice cream maker should first stand in the freezer and cool well.
I got the point?
I really want to pamper my son with ice cream in the evening. Thanks to everyone who responds !!

I make it without an ice cream maker .. knock down the cream of 33% condensed milk and vanillin .. and it's ready in the freezer ... delicious food like in childhood

how to insert a photo? ((

According to the rules, it is supposed to periodically take it out of the freezer and stir it so that ice crystals do not form and the mass becomes more airy, or something. Of course, with 33% cream, no crystals are formed, but I, for example, do not do it with such heavy cream. And if there is someone to entrust this process, then why bother.

[Nara]

Nara

how to insert a photo?

Click the icon - 3rd to the right of the phrase "Text color".

In the dark about ice cream, everyone writes about the famous ice cream from Anastasia, but I can't find the recipe, the whole topic has almost gone. I missed it somewhere. Help, can anyone see?

[Ann_net]

Ann_net

everyone writes about the famous ice cream from Anastasia, but I can't find the recipe

Classic sundae
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=142934.0

[Ann_net]

Ann_net, insert my 5 kopecks. attach two yolks somewhere. I suggest starting with the simplest recipe: 1 can of sour cream (400 g) and 300 g of regular condensed milk + vanillin. beat with a mixer and quietly into an ice cream maker (in mine you need to pour when the blades are already spinning). Let it spin for 20-30 minutes, then into the freezer in a container. the girls wrote above about cream, yes, it's a classic, it's just easier to buy sour cream. you get very tasty ice cream. and most importantly, the result will be 100%
my sister took to try this device from me, began to cook the base, but something went wrong. she was very disappointed and no more
try it, and then you will be drawn to exploits! I know from myself

I've made cottage cheese ice cream, I really liked it, only the cottage cheese needs good, tender, not grains.

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=421885.0

In general, there are many delicious recipes here.

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&board=483.0

my ice cream