Kitchen machine Kenwood (2)

So I’m a "sofa" cat, but ishsho and the back "falls off" ... Suddenly "mycardic infarction"

hello members of the forum, I'm going to buy an AT-970 dough sheeter, but the store has an AX-970, tell me what is the fundamental difference, I think I will take it, but still there are some doubts!

[Lisenok]

Lisenok , if possible, show me your silicone grease Today I went to 2 magician. construction - there is no such thing.Husband said, most likely I need to look in auto stores, so I want to go tomorrow myself, but I must at least see what it is, this lubricant

Sorry didn't see the question. I bought it at the auto shop. I can't show it, because I need to go buy again (my husband greased the door in the house!)

Such a problem has arisen ..... When kneading with a hook, a "metallic" sound is heard, as if the hook touches the bottom. But the hook is written cannot be adjusted. Is it just me so lucky? Run for repairs?

In my opinion, all the nozzles are regulated, the hook is also ... There is a nut, there is a thread .. Everything is regulated ... My hook did not reach the bottom, it seems ... I forgot already ...

The passport says that all the attachments are regulated, except for the hook - in it the factory setting Now I looked - it will not rise above, but you can lower it like one turn of the nut

What if the setting is wrong?

Such a problem has arisen ..... When kneading with a hook, a "metallic" sound is heard, as if the hook touches the bottom. But the hook is written cannot be adjusted. Is it just me so lucky? Run for repairs?

When I first used it, I also had such nonsense. Try to insert the hook all the way. It worked for me. Also, check in an empty bowl to see if it will tap.

When I first used it, I also had such nonsense. Try to insert the hook all the way. It worked for me. Also, check in an empty bowl to see if it will tap.

I tried it empty, nothing touches anything. And the hook seems to be inserted to the end normally. The knock does not start immediately, but some time after the start of work and when there is resistance. The whisk and other stirrers are working properly. Maybe when the dough is tight, then it should be so?

[Angen]

Angen the hook must not only be inserted, but also turned by an hour. arrow, then it is completely fixed - do you do that?

That's exactly what I'm doing. And at the very beginning, everything works fine.

Girls, I ordered an at640 harvester attachment in the online store. I came to pick up, and there are only three disks for a grater in it. AT640 B is written on the box. I did not take it. Tell me, please, who has such a combine, how many disks should there be? Thanks in advance for your answers.

Anyuta, set - 2 shredders, 1 slicer, 1 chopper knife - AT 640

Thanks, you get three nozzles. But I doubt something. Maybe I already forgot, but it seems to me that the forum wrote that there are actually 6 nozzles in the combine, and someone bought it with three nozzles and was very upset.

And also, I forgot to say. The instruction contains 6 discs! And instructions for AT 640 A.

And where is that smiley again, sho hitting his head against the wall? Suddenly, offers of 020 cars for 830 USD appeared. That is, they hung out for a couple of weeks, but today they disappeared ... or was it a test for lice - will they buy or not, or again some kind of glitch? As I understand it, Kenwood's party has been in Ukraine for two months now, but there are still no cars!

Thank you Irina! But something I did not find a harvester attachment on this site. And it's too late already. Today I bought this one - with three disks. Two of which are bilateral. Earlier there were AT 640 and with six disks. And now they are not released.(probably for the convenience of users :)) in general I had to buy this. The harvester is so pretty. Small, but I feel better. The knives are very sharp! The base is metal. I am very pleased. And my mother liked it more than all my attachments.

Anyuta, go to the site, in the left lane on a yellow background you go down - "Electromechanical equipment" - choose "Kenwood nozzles" - there are many different of them - maybe you can pick up something else for the cache

Thank you, Irina! I looked. But the harvester attachment is not there. Did you mean the high speed slicer? I don't have it. And I don’t know if she’s needed? If you cut the cabbage, then its neck is very small. Probably not very convenient. But maybe someday I'll buy more. And I have already bought the rest of the nozzles, except for the potato peeler and the press for berries. I can't wait to get home and start using it all. And then while we live in the country.

[Rolling out is super !!!]

Here, to tell the truth, a potato peeler is needed, moreover, more often than I thought ... I often "torment" her, although she is better for young potatoes than for old ones ... High-speed - for blanks ... soup-borscht - I use Berner ....
I may not be a very correct mistress, but ... Kenwood is more like a dough mixer-meat grinder-beater-rolling !!!! - it works ...Rolling out is super !!!
For greens, a mini-chopper is rather weak ... This is me after-blender-Kenwood can talk.
Blender greens, garlic, etc. "sausage" - it fits in ... In pieces of the right size ... And the mini-chopper "chews", or something ...
A low-speed one is also necessary during the harvesting season, well, this, I repeat, I, apparently, is the wrong housewife ... She cuts and cuts for a long time and tediously ...
The ice cream maker is good, but ... or I'm so lucky ... but I discovered that outside, after freezing, the bowl was bitter and salty ... No, I didn't lick it, I accidentally licked my hand. And then - already on purpose !!! - I lick .... outside. (just kidding ...), but I'm checking ... it seems to me ... that this refrigerant is leaking ... I didn’t drop it, didn’t hit it and .... a hundred more times, DO NOT ..!
But ice cream is great!

I’m just kneading the dough with a combine now - it’s so cool, the cotton doesn’t knead. I will not take the attachments. I decided to put things in order on my loggia yesterday - I look under the soft. stand in the corner of the box and there is a bork juicer, which is an expensive toy, but the juice crushes from anything - threw 4 oranges - at the exit 3 faceted st. juice, I bought it 2 years ago, in short, I got confused in my toys, I also found a deep fryer

ABOUT! how useful it is to rummage around on the loggia .... And with nozzles, well, really, you shouldn't rush ...

Good day! Apparently I'm not the only one ... I follow the "events" around Kenwood 020))). I'm wondering ... what is it connected with?

it has long been rumored that some Kenwood "leadership" is dissatisfied with the relatively low prices for this equipment in Ukraine. In fact, these prices were in line with European average and below average. And the opinion has been repeatedly expressed about the need to seriously raise prices in Ukraine. According to the reviews of the employees of the "branded" firms, the last delivery is already at significantly inflated (in comparison with the previous) prices.

Yes, that's right, when I asked the manager of a Moscow company .. why the price of Kenwood 020 in Russia differs so much from Ukraine, he clearly told me ... "This will not happen anymore, because the previous management was fired!"
This conversation on tel. was at the end of July, he assured me that the price of the awaiting Kenwood in August would be the same (22 tr.), and in early August he calls me and ... announces the price of 28 tr. ..... I naturally refused.
Apparently, due to the demand for KM, some have an appetite in earnest ...

in fact of the matter. They believe that people, if they want to buy, will buy for any money. But our price is unimaginable! For me, even at the old price, it was three monthly salaries, and now

Yes, on principle, if the price is not reduced to a more acceptable level, I will look for workarounds to bring it from Germany.

It is easier for you
And I will hope that their "plans" in relation to us, consumers ... fail !!! It’s necessary to inflate the price at once The most interesting thing is that the price of KM 010 has not changed, even taking into account the growth of $)))
... I have been waiting for this model for four months, I will wait another

In the Internet magician of Moscow the price is from 22000t. p up to 38000t. R . B and Fifty-fifty the lowest prices for 020 model - who needs to take

In Germany, for the money that we were asked for for the 020 model a week ago, you can buy the 040 model ...

THERE IS NOTHING!!! I am telling you this with complete confidence !! Already phoned everyone, wrote ... nothing! I placed an order for delivery last Friday. ru (21850r), on Saturday the daughter-in-law went to the bank to pay on the issued receipt and it was necessary to clarify the details (the checkpoint did not converge) on the website with the receipt, I go ... and there ... "there is no product." I immediately call the company and they tell me yes, absent, choose something similar ...
I wrote to the head office, they gave me the coordinates, I call .... PRICES FOR 020 from 30 000 ....
In general, I think we need to wait out this moment ..))

in general, all this looks like a simple probing and playing on desires.
1. Will they take at such prices.
2. They set a lower price, then they refuse. Overclocking people will take more expensive or other equipment ...

Quite right!
So in the morning I went to look at the prices of KM020 ... in the evening it was 28 with a tail now 24t. R. .... and this despite the fact that today the exchange rate is higher than the earlier one ... What does this mean!?!
... Evil is not enough

In the Internet magician of Moscow the price is from 22000t. p up to 38000t. R . B and Fifty-fifty the lowest prices for 020 model - who needs to take

ha ha ha! They made fun! nothing is ever available in Vasco! Now, after reading your review, I specially called to make sure. There is no trace of 020! Ended up, you see (the question was whether at all!). But they said that there is 010! Please take it. for the price ... attention! the faint of heart is better off reading! at a price of 30,500 rubles !!! So Vasco is that guy! There are no nozzles there by itself!

It reminds me something, it seems, of the situation with Panasonic multicooker ... when an artificial shortage was created on them, and even prices were lifted above the sky ...

We know we know Let them throw off at least a couple of thousand))) Threw off four (it was 5 days on sale 28-odd).
... Apparently this well-known store and the site were "entrusted" with testing the demand for KM 020

today in Ukrainian prices 733-830 US dollars

and I bought today at the second-hand market a book on the angel's on cooking with the help of the chief and the major. Apparently, a booklet from the mid-nineties (2nd ed., 1996).

oh girls, and in my grief from the mountains, I bought myself a Kenwood KM 266 machine for my anniversary, I made a gift, it broke down in less than a month, where the kneader I put a nozzle for a batter and beat for 15 minutes butter and sugar. And the nozzle stopped being pulled out, I passed it for examination, and they said I was to blame, as if I had not completely put the nozzle (although I remember that I inserted it to the end) that I will not put my mind to it, the reducer burned out how much the restoration costs, I'm even afraid to imagine. Like this

Interestingly, how can I not completely insert the nozzle so that it then cannot be reached at all?

Maybe on the contrary, they inserted it at the very nImagu?

The fact of the matter is that I inserted it correctly (I used it every day and I know how to handle the technique) I just bought it in the notorious Eldorado, and they say the experts bought it, so I'm thinking now to take it for an independent examination and sue or just change the gearbox. There, if you do not completely insert the nozzle, you will immediately hear a rattle, but initially everything worked great for me, at the end I already heard a rustle, when I removed everything I saw on the bowl, the experts found fault with this, they thought that everything was rubbed there initially, but I did so it seems that from overheating of the gearbox the nozzle itself can somehow go down, although I am not an expert, but in fact any hostess when turning on the machine if something is wrong she will hear everything and fix it and not as they described everything ...

Why did you go to Eldorado? After all, Kenwood has its own SC.You can go to them, as to specialists, let them look and issue a conclusion.

if it is under warranty, then it is given to where it was bought and nothing else, and only then if the result is not satisfied with independent experts, now I’ll probably go there.

and I'm in continued shock. They called today from a fyrmovy shop and offered KM020 for 6600. I had to refuse.

I looked at German and English Ibei and Amazon - the supply of Kenwood equipment sharply decreased ...

Girls (and boys) help! I am going to buy Kenwood 010, you need to know what height is needed for work between the countertop and the hanging kitchen cabinets. That is, what height is needed to put the blender ... and the height of the CM + processor + pusher.
Thank you.

[Irisk @]

Irisk @ I answer you first, probably, as the owner of KM010, I have a height between the cabinets and the worktop of 70cm - this is according to the rules ..... maybe someone has more, but this is the standard, and the height of KM010 with a high-speed float is 60cm for me, look .. so there is a place, but not very convenient, if you can rub carrots, you need to adjust a little
The most important thing is that the vegetable is not long, then it is normal

Is the Kenwood prices so inflated? I bought my 020 a month ago in Mediamarkt for 17990, now 020 is not there, but there is 023 something ok. 26 tons, 010 for 29 tons Maybe if someone needs to look there in their city?

Girls (and boys) help! I am going to buy Kenwood 010, you need to know what height is needed for work between the countertop and the hanging kitchen cabinets. That is, what height is needed to put the blender ... and the height of the CM + processor + pusher.
Thank you.

Irisk, I have KM 010. The height between the upper and lower cabinets is 48.5 cm. BUT! The depth of the upper cabinets is 32 cm, and the lower ones are 60 cm.Ken's height without attachments is 29.5 cm.He, handsome, stands in my depths, under the lower cabinets, without attachments, on a plastic napkin (I cut it to the size of its base, to slide on the table when I slide it out, and to have to lift it, but it is heavy. If you move it around the table without a napkin, you can damage the rubber bands on which it rests). And when necessary, I push it forward and put on the attachments. Top cabinets no longer interfere. And it is more convenient to use it, because it is at hand and you do not need to reach for it. The main thing is that the width of the table is enough for Ken plus a meat grinder attachment plus a bowl for it.

Is the Kenwood prices so inflated? I bought my 020 a month ago in Mediamarkt for 17990, now 020 is not there, but there is 023 something ok. 26 tons, 010 for 29 tons Maybe if someone needs to look there in their city?

The fact of the matter is that they inflated ... and it's unrealistic ... ((.. yes on such a scale !!!

It is necessary)) and in which city are you located?

In Moscow, it seems, they began to appear .. at reasonable prices, but again they write: "not available, on order" -21000r

[Kitty !!!!!!]

Yeah .... passion here ..... like in Ukraine has always been lower: :) I bought three years ago for 35,000 ..... and with the attachments, so in general !!!!!!
Kitty !!!!!!For you personally !!!! mini-chopper oooooochen helps out when sugar powder is needed ..... helps out great, and I also have a sauce for one time (and if it remains, then put it in the refrigerator and close the cap) butter + lim. juice + garlic + herbs.

Is the Kenwood prices so inflated? I bought my 020 a month ago in Mediamarkt for 17990, now 020 is not there, but there is 023 something ok. 26 tons, 010 for 29 tons Maybe if someone needs to look there in their city?

In Krasnodar in the spring in the same store 010 007 was there for 29 tons.
and 023 cost 39 tons.
I don’t understand anything, like a large chain store. And why is there such a difference in prices in different cities ???

I stood there, drooling and left upset

For the prices that you wrote, I would then buy it without hesitation

[Kalmykova, ANYUTA,]

Kalmykova, ANYUTA, Thank you for your congratulations!
Innusya, see my answer # 759, may help. I have been looking for KM 020 on the Internet for a long time, but I did not find it cheaply - and they are not available anywhere, only to order (which can be completed within 3 weeks or more - and this is not final, so they answered me in Internet stores; they they simply don’t know when the delivery will be!).

I'm in Omsk. In M-Video, for example, in our city everything is more expensive than in Moscow ... and it’s understandable ... To be honest, I didn’t even think that I hadn’t read such prices for this equipment yet, it turns out I was lucky