Igrig
Quote: Aygul
I substitute the cup.
This, damn it, is the most idiotic situation ... It seems to be a trifle, but very annoying. Once upon a time we handed over a very expensive car to Yura.
We have Saeko Talea Ring, so she has thoughtfully done it, this water is drained into the tank next to the spent coffee inside the machine. About once a week, the wife throws everything out and pours it out.
I thought everyone was doing this now ...
julia_bb
Quote: Aygul
During cooking
Just as the coffee grinds! Gavala wrote it all right
Aygul
Igorapparently not all. This does not bother me at all)) there is a lot of water spilled during cleaning, it is more convenient for me right away than keeping it in a container for a week and then draining it. The main thing is that I remembered the principle when it was pouring from)) First, when preparing for work, at the end - when cleaning the cappuccinatore)
Igrig
Quote: Aygul
It doesn't bother me at all))
This is the most important thing!
$ vetLana
Quote: $ vetLana
Grinding settings have not changed, it is worth 5 out of 7. At 3 it can be rearranged
According to the instructions !!!
Aygul, I have written! Be sure to grind time !!! The instruction is small, read it, there is both about cleaning and about water hardness !!!
Wash once a week! You take out the infuser and into a pot of hot water. Let it lie down for a while. The coffee is greasy, you need to wash off the coffee oil. Perhaps there is a video, take a look.




The machine will beep when it is necessary to thoroughly rinse. We do it once a year. It depends on the hardness of the water.
Igrig
Quote: $ vetLana
Wash once a week! You take out the infuser and into a pot of hot water.
Whoa! Once a week!!!!!!!!!
The knot is plastic, how is it in hot water?
Actually, there are tablets for coffee fat, we have to throw them into the ground coffee compartment and the machine cleans itself.
I'll go read the instructions ...
$ vetLana
I do as the owners of Delongy advised in this thread.




I can't say about other coffee machines.




Quote: Igrig
The knot is plastic, how is it in hot water?
But what about the boiling water that passes through this node?
Igrig
Quote: $ vetLana
But what about the boiling water that passes through this node?
Well, Duc, because you can make a knot with a diameter of 5 cm from a particularly resistant plastic, and the remaining 30x20 cm from plastic is simpler.
There is plastic that can withstand 300 degrees, but it costs several times more than simpler ones ...
$ vetLana
I won't argue, it's pointless. I wrote how I have been doing for two years, and everyone decides for himself to use this experience or not. I trust the people who advised me, they have a lot of experience and many years of ownership of Delongy. This budget option suits me.
Igrig
Quote: $ vetLana
Wash once a week! You take out the infuser and into a pot of hot water.
Read: once a week, but wash WARM water!
By the way, the infusion container itself, in which the tablet is pressed and water is passed through it, seems to be metal. But I will not pull out and check, there is no time.
To be honest, we clean this block much less often, it should be more often ...
Margass
Quote: $ vetLana
Mandatory during grinding
with a decrease in the degree of grinding - yes, with an increase it is allowed to twist without grinding (it is written in the instructions)
Quote: $ vetLana
boiling water that passes through this node
boiling water does not pass through the entire teapot, you can even wash it in the PMM, only now ... >>>

Quote: $ vetLana
You take out the infuser and into a pot of hot water
and then dry and lubricate (in the right places) with food grade grease, otherwise the rod can jam, the load on the mechanics will grow several times, the gears break / spin, the charger is blocked and then only for service.
Igrig
Quote: Margass
boiling water does not pass through the entire teapot, you can even wash it in the PMM, only now ... >>>

Quote: $ vetLana from Today at 14:54

You take out the infuser and into a pot of hot water

and then dry it and grease (in the right places) with food grade grease, otherwise the rod can jam, the load on the mechanics will grow several times, the gears break / spin, the charger is blocked and then only for service.
Thank you very much!
Damn it, I didn't even think about lubrication! (Even though there is no dishwasher!)
$ vetLana
Margass, Tatyana,
Margass
Igrig, in the PMM is not worth it. The husband has already reanimated 3 coffee machines, one at our house, the other at the parents, the third for spare parts in the service was left (there, besides the memory, there were problems with a boiler and a tap).
Why not in the PMM - there are sealing gums in the memory (at least in the piston and the fitting of the infusion block) - they definitely cannot be in the PMM (but lubrication is not bad at all), I'm not sure that the sieve will tolerate chemistry well, like plastic; therefore - only with warm (soapy) water.
Food-grade high-temperature grease comes in sets with coffee machines, or is bought in services, why high-temperature grease - since it will wash off the usual one from the rubber bands very quickly (water / steam under pressure up to 18 bar goes, as we remember)
$ vetLana
Quote: Margass
The husband has already revived 3 coffee machines
Delongy?
zvezda
Aygul, congratulations on a good car !!
It doesn't bother me at all to substitute something, I adapted the pitcher. Correctly girls write about the infuser, cleaning it! Recommended once a week.
Margass
$ vetLana, Saeco
Aygul
zvezda, Olya, thank you!

I tried to pull out this same brewing unit - it did not work.

Slide out container for water, milk, cup holder and container for grounds.
To love
zvezda, Aygul, girls, the machine is really good. We still bought our own at the beginning of December in 13, but last April he writes: descale, removed, removed, and she writes everything: the machine is removing scale. I had to take it to the service center, cleaned it there, kept it up to NG, right now, again on "treatment" by the same master. Kicked something
I also substitute a cup of coffee first and under the rinsing
gawala
Quote: Aygul
I tried to pull out this same brewing unit - it did not work.
The machine must be turned off. Ie drank coffee and press the off button. All. the block can be removed perfectly. If the machine is not switched off, the unit cannot be removed at all.
zvezda
Aygul, don't be afraid, press the two recessed, red clamps, they can be seen immediately and carefully remove them! Galya wrote correctly, only !!! off.
Ira , and you do not accidentally drink flavored coffee ?? And, try to change the hardness in the settings .. I pour only purified water, I have ozonized, but not mineralized.
Margass
Quote: gawala
The machine must be turned off
strictly speaking, the machine must complete the cycle (click to the end), then you can get it out. there is a latch on the brewing unit, you need to press it - after which you can get it out.

Quote: Lovemaking
and she keeps writing: the machine is descaling
the machine does not know how to determine how much scale is inside, the programs are based on the readings of the water hardness (set manually at the first setting), the presence of a filter (its presence is also usually noted in the settings) and the number of prepared cups (= water passed through the mechanism), respectively. either the cleaning cycle does not reach the end, or the cleaning program is buggy without resetting the counter (which is strange).
You can generally run the cleaning cycle according to the instructions, but without pouring in acid (which is citric (you need to be careful with it), which is "branded" dairy) and at the exit you can see whether it will stop complaining or not.




Quote: zvezda
flavored coffee
but this is generally not recommended for use in coffee machines
zvezda
Quote: Margass
this is generally not recommended for use in coffee machines
Therefore, I asked .. I have nothing to do with the quantity, I don’t know why, but I measured it and was surprised myself
gawala
Quote: Margass
the machine must complete the cycle (click to the end), then you can get it out. there is a latch on the brewing unit, you need to press it - after which you can get it out.
Tatyan, I have Delongy. If the machine is turned on and ready to work, then I will never get the infuser. Disconnected after brewing coffee, I take out everything and mine.
$ vetLana
Quote: Aygul
I tried to pull out this same brewing unit - it did not work.
Aygul, enter in the search: cleaning the Delonghi coffee machine from coffee oils video.
gawala
Quote: $ vetLana
cleaning the Delonghi coffee machine from coffee oils
I make it easier, take out the infuser, unscrew the mesh, rinse it, wash off all the oils, screw it back and put it in place. In Jura, tablets are needed for coffee oils, because the brewing unit is not removable there. And Delongy doesn't need dancing with tambourines. But that's my opinion. Others may do things differently. and yes, we fill only soft water, because hard water and coffee will be stronger and hotter. We don't like this kind of coffee.
$ vetLana
I recommended a video so that Aygul understands how to take out the infuser.
zvezda
Quote: gawala
I make it easier, take out the brewing unit, unscrew the mesh, rinse it, all the oils are washed off, screw it back and insert it into place.
Sistra !!! I have had Delongey for 20 years, the last one is 8 and the super permanent master advised all this in that order. Do not try to get out of the included one !!!
gawala
Quote: zvezda
Do not try to get out of the included one !!!
The Lord is with you. Although I’m not a physicist, I’m the wife of an electrician-electronics engineer ..
I got inspired, went to wash and clean everything ..
elvin
Girls, hello everyone! Galya, where is this mesh in the brewing unit? And then I take out the Chukchi, put it in the water, then rinse it and that's it. I also want her (the car) to do something nice, wash the entot block as follows.
gawala
Quote: elvin
and where is this mesh in the brewing unit?
Unscrew with a Phillips screwdriver, rinse the mesh, inside under running water and screw it back. I have been doing this for all 6 years since I bought the car.
Coffee machine
elvin
Quote: gawala
Unscrew with a Phillips screwdriver, rinse the mesh,
Galya, thanks! Here zhezh, live and learn. Well there is a bread maker, with its helpful guests!
gawala
Quote: elvin
Thank you!
Elvir, not at all. I wash the mesh with Sif and a toothbrush so that the holes become visible, then I rinse it very well under running water so that the smell of chemistry does not remain. you can probably wash it with anything, even with soap, but with a brush, then all the oils go off perfectly.
zvezda
Quote: gawala
Lord be with you
So I'm not at all for you
Now I wash everything with Giraffe mixture, gorgeous, gorgeous !!
gawala
Quote: zvezda
Giraffe mixture
Well, what does it include?

Quote: zvezda
So I'm not at all for you
Could me too ..
zvezda
Quote: gawala
Well, what does it include?
Hello Madame Broshkina ... lim. acid + soda + liquid soap + vinegar + water. Washes everything in general ..
gawala
Quote: zvezda
Hello Madame Broshkina.
Hello Star Called Sun ..
After all, there is something I may not know, I may miss something ..
zvezda
Quote: gawala
I may not know something, I miss something ..
Don't ,, you can't,
gawala
Quote: zvezda
Don't ,, you can't,
Well, of course, you will say more than the prosecutor, just listen to you ..
zvezda
Quote: gawala
just listen ..
You think correctly ... you should always listen to me, tea was not for nothing on Radio Day was born
Girls, look for the composition on the forum yourself, I don't remember, doing it by eye ...
Aygul
Devchuli, I found an infuser in Delongy, he was hiding behind a water tank, and on the facade I was looking for something to push
gawala
Quote: Aygul
I found an infuser in Delongy, he was hiding behind a water tank, and I was looking on the facade for what to push
Different design .. On my facade. Very comfortably. I at one time did not buy a car precisely because of the side infuser. I was shown in the store how to take it out and I realized that I did not want such a design.
and when I watched the video, I also thought, like, like a teapot peeking behind the tank, but for some reason I doubted ..
irina123
Good afternoon, advise, a coffee machine, average in price, but my husband only agrees to delongues, thanks for earlier
gawala
Quote: irina123
but the husband only agrees to delongues,
Well, this is a good car ..
irina123

Well, this is a good car ..
[/ quote]
I agree, but you have to choose not expensive
gawala
Quote: irina123
you have to choose not expensive
Which brand is cheap? There are coffee machines of well-known brands that have a different price category from 250 and more ...Melitta coffee machine, Saeco (Philips) coffee machine
$ vetLana
Quote: irina123
choose not expensive
Take the cheapest Delongy if the look suits you. The girls here advised me just such an option, for which I am very grateful to them. For two years I have never regretted what I bought.
irina123
gawala, Galina, I'm interested in delongues, I read the whole topic, taking into account Ukraine, so this preference, I tend to the cappuccinatore in the form of a tube) since coffee is more just espresso




$ vetLana, tell me the model please, I will be very grateful)
gawala
Quote: irina123
tell me the model please
DeLonghi Magnifica ESAM 3000-EUR 293.64
DeLonghi ETAM 29.510.B Autentica-EUR 249.90
DeLonghi Magnifica ESAM 4000-EUR 264.95

De'Longhi ECAM 21.116.B Magnifica -EUR 246.00

Prices are from German ibey.

$ vetLana
Irina, I have a De'Longhi Caffè Corso ESAM 2600 coffee machine. When I bought this model was the cheapest.
Now I looked at the prices for Delongi with us, there are also slightly cheaper models.
Delongy has a good infuser that is easy to maintain. Therefore, I advise

All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers