Yuri K
Quote: Irinap
Something I no longer like my maragajap
Oh, have you tried Brazil Ipanema Dulce? I really have a fuse ... Soft, fragrant, it is combined with milk (if you drink cappuccino) 100%
Rusalca
Quote: Yuri K
Oh, have you tried Brazil Ipanema Dulce? I'm really into it.
I support.
Irinap
Yuri K, look for
Yuri K
Quote: Irinap
look for
I thought you were buying from roasters on the Internet
win-tat
Quote: Yuri K
In short, it takes almost 5 minutes to grind two and a half teaspoons of grains! With respite - exactly 5
Oh well wow
I have already written about coffee grinders in the topic, I have a Turkish Sozen and bought on Avito and brought to mind already at home Armenian.
So both grind very quickly, 8-10 grams per minute of continuous twisting, and twisting is not at all difficult.
Irinap
Quote: Yuri K
you thought on the internet
I buy it on the Internet, but I want it on the WB, it's very convenient, but there is just that.
Yuri K
Irinap, WildBerries? No, I don't trust ... This is a store, not a roasting company like Tasty
Irinap
Yuri K, and testi 100% prepayment?
Yuri K
Irinap, Yes
Charlotte
The coffee grinder with the handle shown above is Saxon. Everything is beautiful on the outside, cast iron and wood, inside is Chinese soft tin. The option has actually been known for a long time - to turn it with a screwdriver. Well, that is, like a blender, only homemade

There is an option with a handle.
Assistance in buying a manual burr coffee grinder
This is my beauty. In addition to the logo paint, there are no markings on it. I won it at an auction, the owner wrote that this is a prototype that did not go into production. It's clear why - it looks too much like this milk - HG One Grinder
Assistance in buying a manual burr coffee grinder
Dear contagion.
Since I'm a weak girl, I twist the handle a part of the turn. And this is for espresso. That is, it can completely close the millstones, but then I will not scroll. Well, I'm worried about the thread on the shaft, if you push harder, it will merge. We could have done a downshift, but no.

And yes, I know those who attached the engine to the HG One. A collective farm came out, but you don't need to twist.




IrinapWhy prepayment confuses you? These are not clothes to carry them back and forth. If you, say, did not pick up the order by mail, they will not be able to sell the grain to someone else, because everyone is buying fresh.
Another thing is that testing is not the best choice, the best torrefacto (more expensive)

🔗

Niarma
Tatyana, if I am not mistaken, do you also have Armenian "fungus"? And grinds 8-10 grams into flour in a minute? Have you taken apart the millstones?
Yuri K
Quote: win-tat
bought on Avito and brought "to mind" is already at home Armenian.
So both grind very quickly, 8-10 grams per 1 minute of continuous twisting, and twisting is not at all difficult.
I will believe if the millstones were resharpened by ordering from a milling machine.
win-tat
Quote: Niarma
Do you also have Armenian "fungus"?
Marina, yes, here I showed it
Coffee Grinder # 387
She looks of course still the same, but she grinds beautifully. Yes, they were completely dismantled.
Yuri K, believe it or not, but the millstones are beautiful, I don’t understand why they should be sharpened, my coffee grinder did not need such an upgrade, all we did is
Coffee Grinder # 418
I'm not talking about Sozen at all, a gorgeous thing without any refinements.
Anna1957
Tatyanabetter than Armenian?
win-tat
Anna, so I can't single out one, both grind into dust, only Sozen right away, but I had to work on the Armenian one, and if it hadn't been for the rolled ball, I would probably have played it for about 10 minutes too.

selenа
Anna, at 1.50 for grinding.

It shouldn't be quite dusty.
Anna1957
How much did it cost you? From Amazon or from Ibea?




Hope, watched the video with pleasure. Fuh, you can stir with a whisk both clockwise and counterclockwise)))
Yuri K
Quote: win-tat
I had to work on the Armenian one, and if it hadn't been for the rolled-up ball, I probably would have played it for about 10 minutes.
I initially had a tiny ball there. Apparently it was used by knowledgeable people. I did not examine the millstone, did not knock out the mounting plate.
selenа
A small ball stands under a threaded screw and tightening this screw, which ultimately presses the ball, the grinding is adjusted. So it was in my Armenian, which no one had used before me, and you could still move the bar into which the ball was inserted to the side and remove the millstones for washing, during this procedure the ball was constantly lost
win-tat
Quote: Anna1957
How much did it cost you? From Amazon or from Ibea?
From Ibei, I don't remember exactly the price, about 2200 = with free / delivery, here I gave the link
Coffee Grinder # 456
Sens then I also ordered a similar one and was very pleased.
Coffee Grinder # 464
Niarma
Quote: selenа
slide the bar into which the ball was inserted to the side
and how to do it? It doesn't move, and it's scary to knock it out, I'm afraid I won't insert it later. Although I bought my first "fungus" almost in a new state, but the second "fungus", which was given away as unnecessary (seemingly well-worn) grinds better
win-tat
Quote: Niarma
She does not move, and it is scary to knock out
After our screw fell apart, knocking out was no longer scary. Mine has most likely not been used for a long time, so everything is rusted there. In general, after my husband disassembled it, soaked all the parts in Coca-Cola, as the pros advised on the Prokofe website, orthophosphoric acid cleaned everything perfectly.
Niarma
Quote: win-tat
her husband took it apart,
Master class from your husband, please. Or at least find out what and how he beat the bar
win-tat
I was not even interested in such nuances, well, I probably squeezed it in a vice and knocked it out with a hammer. There I also had to drill out the remnants of the fallen off bolt.
selenа
Niarma, I don't remember how I got it, but without the help of brute male power - that's for sure
Niarma
Hope, remember, all hope is on you
selenа
Marina, it moves to the side, in my opinion only one, here it is necessary to decide which one, it moves with difficulty, and I remember that it was very important that it would enter without the slightest distortion, then it will be more difficult to get it and it was very important to insert the ball first, and then the bar, it happened the other way around and then "it was wet - start over", everything, for the life of me, I won't remember anything else, and I doubt that I remembered
Niarma
it seems better not to touch ...
Charlotte
Virgo, suddenly who in the Sverdlovsk region needs milk, the brother of a blender is an element for a penny 🔗

Itself would have taken in reserve, but carry far
Yuri K
Something no one took from the link with Avito blender
Charlotte
The element is peeled off. The inscriptions on the case have been erased, soon which turbo button will not be visible.
Yuri K
Charlotte, hmm, exactly ... Everything was washed. China, such a China ...

All recipes

New recipe

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers