Kara
A tagliatelle isn't it shorter?
gawala
Quote: Kara
A tagliatelle isn't it shorter?
wide pappardelle
anna_k
Kara, there is still a wider nozzle, but that one was papardelle. There is already, linguini. Well, and a cappellini, which by the way really liked
Kara
In short, everything must be taken
gawala
Quote: anna_k
There is still linguini
want...
anna_k
gawala, so you have this attachment!

I want myself for cookies, it remains to get adequate recipes
gawala
Quote: anna_k
so you have this attachment!
It is Linguini who is not. There is Taliatelle ... Yesterday I was looking at the photographs .. it seems the same in form .. the names are just different ..
Twig
Quote: anna_k

Trackless parcels began to steal, we already have a lot of things that have not arrived.
And the phone left the last sorting yard in the summer and ... after a couple of months it was simply declared lost ... like this

and I have lost a lot of things :(
The other day, the courier delivered a parcel to the house, signed it, let it go, open it, and there are two pieces of foam. I wrote to the dek, they say, watch, at some stage they steal, so they didn't even apologize. They asked if you made a claim with the courier? So I didn't open it in front of him. Eh. I don't even know exactly what should be there, I got confused in the tracks and best tracks. But small things, garbage. Could at least look by weight, or write something comforting



Well, girls, how many times a week do you eat pasta?
gawala
Quote: Twig
Well, girls, how many times a week do you eat pasta?
We are ready to crack them every day .. Painfully, the process is fascinating ..
Twig
Does it affect the figure?
Sedne
Veta, they get fat not from pasta, but from what you eat with them, Italians eat them all the time, and pizza will not be thicker than ours. By the way, about getting fat not from pasta, I heard from a nutritionist.
Twig
Eh, I can't eat pasta alone
There you need sauce, cheese, cutlet
I can't get your car, I can't. So, with one eye I went to Temko
Sedne
Veta, the sauce is also different, the tomato is light, but the creamy yes. But I prefer tomato.
gawala
Quote: Twig
Does it affect the figure?
Who knows ..


Added on Tuesday 17 Jan 2017 5:05 PM

Quote: Sedne
they get fat not from pasta, but from what you eat with them, Italians eat them all the time, and pizza will not be thicker than ours
Their constitution is different .. They have all the fat melted in the sun ...
anna_k
Today I made a cappellini, and on Kara's advice I made 175 g of hard varieties, 75 g w / s.
The result is good, perfect thickness and structure. It seems to be a favorite nozzle.

Pasta machine Philips HR2355 / 09

And my husband also threw up an idea - to create the necessary stencils for the paste machine and print them on a 3D printer.
The cost will most likely be comparable to the original attachments, or even more expensive, but it will be possible to create the necessary attachments that do not yet exist, or never will be.
Personally, I want fusilli and bucatini as well as mini-penne. I love small macaroshki
Oh, it would also be cool to make a cookie cutter, like in a Taper meat grinder.
gawala
Quote: anna_k
create the necessary stencils for the paste machine and print them on a 3D printer.
And then what to do with them? Grinding from plastic, metal ... how to attach them to a typewriter?
anna_k
gawala, get ready-made nozzles and use as directed

My husband is fond of air rifles, they have several people who make parts to order. The quality is very good, it looks like a factory one.

The husband will find out how much it may cost in the near future.
The most difficult thing is to create a drawing.
I am ready to send some kind of sample attachment.
After the drawing is ready, it remains to "print" the required number of attachments, and then send it to the happy owners.

In theory, the nozzles themselves will change slightly in the middle, so it is expensive to make only the first sample - the rest will be made practically by copy-paste
lisa110579
The 3D printer gives out the finished part, I think this was meant
Today, my husband and I also discussed this very issue.
Already answered
gawala
Yeah, everything is clear ..
lisa110579
Girls, I'm grazing in your branch, so to speak, I'm getting ready mentally, my husband paid for it today, but there was one in the shop window, so we’re waiting for the delivery
gawala
Quote: lisa110579
mentally preparing
You need to stock up on flour, hard varieties .. Only in this way will it begin to fly away ...
lisa110579
: girl_claping: So I even made pasta and pizza on it before, I just recently bribed an Italian one.
gawala
Quote: lisa110579

: girl_claping: So I even made pasta and pizza on it before, I just recently bribed an Italian one.
Then fully armed ..
Kara
Quote: anna_k

Today I made a cappellini, and on Kara's advice I made 175 g of hard varieties, 75 g w / c.
The result is fine, perfect thickness and structure. It seems to be a favorite nozzle.

Anya, how does this nozzle look like?


Added on Tuesday 17 Jan 2017 8:30 pm

Quote: anna_k

gawala, get ready-made nozzles and use as directed

In theory, the nozzles themselves will change slightly in the middle, so it is expensive to make only the first sample - the rest will be made practically by copy-paste

Good 3D printers come with a special program, you can immediately model on it, you just need to know the dimensions
anna_k
Pasta machine Philips HR2355 / 09
This bait is not much smaller than square spaghetti.
This 0.6 is round, the spaghetti is 0.9 square.
gawala
I did it from this one yesterday. it's like noodles .. asks straight for soup ..
Kara
Quote: anna_k

Pasta machine Philips HR2355 / 09
This bait is not much smaller than square spaghetti.
This 0.6 is round, the spaghetti is 0.9 square.

Stunned. That is, it is even smaller than spaghetti? Me and spaghetti are so big
gawala
Quote: Kara
So it's even smaller than spaghetti?
yeah. so visually it is even visible that the holes are small. I'm talking noodles, noodles, for chicken soup.
anna_k
I really liked it as a side dish. I love very thin noodles.

I also noticed that my Phillips is hefty smart ... Yesterday I poured flour, and he glitched and lost weight, but did not let me press the button anymore. I had to cheat. I put a piece of 200 grams in a container, as if pouring flour, only after that it started.
In general, woe from wits))))

The husband has already become quite loyal to Phillips, apparently resigned
Irgata
Quote: anna_k
The husband has already become quite loyal to Phillips, apparently resigned
like all of them, husbands ... first or, then, and then
kil
Oops 3D printer is a great idea. My sister's plug from an expensive oven broke, it is clear that the officials immediately said to change the entire unit, but her husband made a new detail on this very printer and everything works and makes me happy. In short, a 3D printer is EVERYTHING.
Lanko
Girls, I decided ... I just can't find Phillips' 15% discount. But I saw her. Or was it a temporary offer, and now a gift instead? Help me figure it out, please.
I really want my unclean pasta ...
Lera-7
Quote: Lanko
I just can't find a Phillips 15% discount.
I also
Kara
Girls, you need to register on the Philips website itself, not in the store, and then a discount code will be sent to the registration mail. And you are already using it in the store
Lera-7
Irina, Thank you. Yesterday I registered on the store's website, and I can't see any discount. I'll try again as you said.
Lanko
An email has arrived confirming the address. I will wait a little, and most likely I will buy without a discount
Lera-7
Quote: Lanko
An email has arrived confirming the address.
I also received such a letter, but there is no discount code
Lanko
I ordered it without waiting for a discount. They should bring it on Wednesday. And why do I need a third iron? But other gifts are not mine at all ...
Lera-7
Quote: Lanko
I ordered it without waiting for a discount.
Congratulations! Her, I don't want without a discount, and I can't. Expensive.
Lanko
Lera-7, Svetlana, it's easier for me, I'm half with my son. And she certainly could not, more than a monthly income for a very coveted car ...
Lera-7
Quote: Lanko
me and my son in half.
Zdaboutrovo!
Oktyabrinka
Girls, to get a 15% discount on the first purchase, you need to register at the office. the site must join the Philips club and subscribe to news. I was sent a promotional code for a discount only for the second day. so I, too, now with a pasta machine (although I don’t have any enthusiasm for the purchase, here is a dumpling machine, yes)
Lera-7
Quote: Oktyabrinka
I was sent a promotional code for a discount only for the second day. so I, too, now with a pasta machine (although something I have no enthusiasm for the purchase
I will wait, maybe they will send me Tatyana, Congratulations! And why not very happy with the purchase, which did not like it?
sgf45
Quote: Oktyabrinka
here is a dumpling machine yes)
Tatiana, can I have details or a link in PM if this topic has already been discussed?
Helen
Tatyana, Congratulations!!!
Rituslya
Oktyabrinka, Tanechka, yohu !!! Congratulations! Nothing, nothing. Delight will come later.
The main thing is to feel and feel so early.
Gorgeous. Congratulations from the bottom of our hearts!
Masinen
Oktyabrinka, Tanya, why so?
Oh, I'm still dying of pleasure)
I got it today, quickly made some horns and hurray !!
not, very happy
gawala
Quote: Masinen
I got it today, quickly made some horns and hurray !!
What kind of horns? Where are the horns? what kind of nozzle ???
Today I did a wide one, like her papardels .. Everything is fine .. nothing inflated, well, I made only from hard grain .. Tasty .. I am generally silent about pleasure .. Nirvana .. practically ski ..
Masinen
gawala, Galin, this is for the tubes, but when they just crawl out, they must be cut short and there will be almost horns))
gawala
Quote: Masinen

gawala, Galin, this is for the tubes, but when they just come out, they must be cut short and there will be almost horns))
Pasta .. okay. and I was really scared that the nozzle for the horns appeared .. but I don't know ..

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers